Recovery of the time values

Similar Questions

• Restrict the time value in the calendar

  Hello..
  
  How to display the calendar without time value
  
  When I select the date in the calendar he displayed without time, but when I hit the go button the time value is added to the prompt values.
  
  How to get there?

  What version of OBIEE do you use?

  The procedure is all is set correctly to get the date (without timestamp) in the dashboard caledar prompt. I explained procedure several times, then maybe you can read:

  http://108obiee.blogspot.com/search/label/date

  There are a few posts on this problem and you will find your solution there, it is very useful and you will notice that I have not timestamp in the prompt calendar inside my examples. Step by step.

  Concerning
  Goran
  http://108obiee.blogspot.com

• Returns the time value zero calendar

  Hi, I write code with calendar that return the value zero for HOUR_OF_DAY and MINUTE when I run this code in Strom2(9550-5.0.0.334) below.

  Calendar calendar = Calendar.GetInstance ();
  Date date = new Date (this.arrivalTimeField.getDate ());
  calendar.setTime (date);
  Day int = calendar.get (Calendar.HOUR_OF_DAY);
  int minute = calendar.get (Calendar.MINUTE);

  So please help me for this problem and thanks in advanced

  I had a lot of problems like myself.  Invariably, I find that the bug is my code.  Usually, it is not difficult to find using the appropriate debug or SimpleDateFormat (because times are difficult to interpret, it is good to let the system do it for you!).  I suggest you do the same thing here.

  If you find that the system does not have it that you wait, then give us the details, for example, give us the long value that you provide to the calendar and the time you go out. You should be able to do it in two or three lines, just using the standard Java RIM (i.e. None of your classes).  You can also indicate the time zone that you are testing in.

• Take the last value of the timer

  Hello

  Looking for a help store the timer values.

  Set the backround: will be used to gather data for tests on mechanical switch lifecycle sump pumps.

  Needs to: number of cycles (lit-shut down-lit), Count time stuck we or off (authorized in time is the estimated time to fill/drain sump), see the amount of time stuck on or off.

  I got all of these features to work, but my problem is that when I save to spreadsheet each incriment stuck time power is saved. This could lead to a large number of unnecessary data points. Instead, I want only the last zero no value of the glued power saved timer.

  Any help is greatly appreciated.

  ~ Andrew

  Here ya go:

• final value of the timer

  Hello

  I have a few problems to store the timer values and appreciate all the help I can get.

  Set the backround: to collect interval data (time, count) between packets on an assembly.

  Needs of: count the number of packets and view the time between packets.

  My problem is that when I save to spreadsheet each incriment stuck time power is saved. This could lead to a large number of unnecessary data points. Instead, I want only the last zero no value of the glued power saved timer.

  Any help is greatly appreciated.

  ~ Modi

  
  

• Time value of the time indicator?

  Is there a property that allows a script read the time value of the current-time indicator?  If so, how?

  Thank you!

  I think it would be fair to the attribute of an hour :

  Alert (App.Project.activeItem.Time);

  Dan

• Understand the time functions

  How this function runs? When I write below the rule...
  
  the person meets the condition of age if
  
  both
  
  TemporalBefore(2007-01-01) and
  
  age in years > = 55
  
  or
  
  both
  
  TemporalOnOrAfter(2007-01-01) and
  
  age in years > = 65
  
  How this function evaluates the conclusion true or false based on the functions TemporalBefore() or TemporalOnOrAfter()... What information it takes like reference date to decide TemporalBefore() or TemporalOnOrAfter(). I want to say is we have to compare two values where there is here only one value in the functions...
  
  Need currentDate as date of reference?
  Published by: Rajan.Panchal on April 4, 2013 20:58
  
  Published by: Rajan.Panchal on April 4, 2013 20:59

  You have to understand the time values. TemporalBefore () returns a value time is real before the specified date and false later. Whenever you use a time value in the rules the result is another time value. The time values are extremely powerful, but it takes a little while (and convenient) to get used to the concept.

• Average time of recovery in the alerts log

  Hi Experts,
  
  I found the following statement in the alerts log. my version of the 11.2.0.2.0 database - 64 bit.
  
  FAST_START_MTTR_TARGET 60 is too low, to the minimum achievable MTTR 61 rather helps - in my alertlog.
  
  I have found that whenever you set fast_start_mttr_target to a value other than zero, and while the MTTR is what WE, Oracle Corporation recommends that you disable (value 0) the following parameters:
  
  LOG_CHECKPOINT_TIMEOUT
  
  LOG_CHECKPOINT_INTERVAL
  
  FAST_START_IO_TARGET
  
  The values that I found in my database.
  
  fast_start_mttr_target integer 60
  
  log_checkpoint_interval integer 100000
  
  log_checkpoint_timeout around 1200
  
  FAST_START_IO_TARGET integer 0
  
  My question is will I have to perform no action, what I found in the alerts log. I read on the fast_start_mmtr_target according to my understanding
  
  The fast_start_mttr_target defines the average time effective to the target for recovery (MTTR), expressed in seconds.
  
  The default value of fast_start_mttr_target is 300 seconds (5 Minutes). and the maximum we can give 3 600 (1 hour).
  
  Administrators specify a (delimited) target time to complete the phase of recovery of cache recovery with the fast_start_mttr_target initialization parameter.
  
  Please suggest your ideas.
  
  Thanks in advance.

  Without knowing why, this parameter has been set to a specific value (in this case 60), I suggest you not change to something else. In general, the init.ora parameters are defined for some reason, I hope that logic.

  HTH
  Srini

• Once again the value of the Time Machine

  I did install clean and fresh for the new OS El Capitan, erasing any ssd drive, where I imported all the data external Yosemite Backup by usb drive.

  I used the airport Time Capsule for 2 years in Yosemite and now I want to connect to El capitan, but I wonder if I lost inside TC previous data.

  My field of application must Add new backup of El Capitan, keeping the previous Time Capsule content (of course if there is free space!)

  This may occur for use transport CANADA data if I forgot import specific data.

  How can I join TC El Capitan please? Suggestions?

  Your original (from Yosemite) backups for the past two years are still on your time capsule to the sparsebundle disk image.  You have done a clean install of OS X El Capitan and retrieved the data and the settings you wanted from your Time Machine backup.  What you need to do is then open Time Machine preferences and choose "select disk" - and re - select your Time Capsule.  A new backup will start (and it will be a full backup) - but it will not overwrite your original historical backups of Yosemite - they will remain separate within the sparsebundle.  A quick glance-, it may seem like they are gone - but Time Machine will show you only the backups for the latest version of Mac OS X by default.  You can 'Browse other backup disks' hold down the option key when you click the Time Machine icon in the menu bar.  If you need to restore your whole machine to Yosemite or to a point before installing El Capitan - the "Time Machine backup restore" option in the recovery partition will allow you to review and select the old backups of Yosemite.

  To "do" to ensure that your time capsule is not running out of space.  If space is low - there is a risk of Time Machine, remove older backups.

  If you believe that there is a lack of disk space on the time capsule - another option would be to create a new folder in the root of the time Capsule and name it "old backups.  Drag the sparsebundle existing in the new folder.  The move operation must be almost instantaneous.  Time Machine will no longer see the sparsebundle and will not attempt to clean or to crush it.  When the next backup run - it will create a new image of sparsebundle containing a full backup to the root of the time Capsule.  You can always restore (if necessary) of the sparsebundle you have hidden in the folder "old backups.

  A third option (if disk space is very limited) would be to move the sparsebundle existing in the folder "Old backups" and allow Time Machine to create a new sparsebundle.  At the same time - you can copy the old sparsebundle to another drive somewhere - and then delete it from the time Capsule to free up space.

  ~ Scott

• There is a special token that I can put in a column of the CSV file recovery channel which implies approval of the current value?

  Versistand version is 2013 sp1.

  I use stimulus CSV expressions in my sequence in real time and want a channel to keep its value current (last) until a certain time. Is there a way to do this?

  Stimulation CSV file example:

  timestamp, chan1, chan2

  0,0,

  10, 1,

  20,1,5

  30,2,10

  In this example, chan2 would retain its current value until the timestamp 20.

  Is it possible to implement this feature?

  Kind regards

  Rick Howard

  Thank you! It is a valuable feedback. I can't think of a way to do natively with the functionality of reading CSV for sequences in real time. Some thoughts on how this can be done:

  1. create your own utility to sequences of script based on a CSV file in real-time. Extend the functionality of having a special marker in a cell which designates not only to change the value for the channel as timestep. Do not start from scratch. This tool open source and this one the two script of sequences in real time and stimulation of reading profiles based on data sets (although in different ways).

  2. with the help of software without insertion to the fault of the string value that you want to keep the initial value for the first X seconds of reading the CSV file. For example, you could play another sequence with your CSV file at fault the channel at its current value so that reading CSV does not replace the value.

• How can I add value to the existing values over a period of time?

  Sorry guys, I apologize in advance because I think that this problem can be very simple, but I had been mind blocked through hours of Labview tutorial and try it.

  "Lets say, I'm working on a parser of training and the z axis lower to 0 every time, I have it counts as ' 1 count ', I wanted to add the total number of charges. Can I use an array to store the 'total '? I try to use register to shift and it gives me only the current number and the previous, i.e. I get 2 whenever I'm doing a count.

  If you want just a number, a scalar value must be what you put in the shift register, not a table.

  If the condition is true, add one to the value in the registry to shift and move it back in.  If the condition is false, then just put the current value in the registry change to.

  

• Take the time between two values

  Hi people,

  I have a problem and I know idea how to solve... I need help.

  The problem is I want to take the time between two values max as you can see in the chart.

  For example, in the image that I have add

  4.5 - 1 840 = 2.66

  And enter this value in the 'time between mostra '.

  It's that I want...

  But what I think is very complicated, because I don't know how to take the time correctly and does remove...

  Thank you very much

  Any solution?

  Hi jocuma,

  I tried something and hope that helps u.

  Just create two arrays of temperature and voltage. First of all, I'll get the value of the voltage when it is more of a certain value and that same index to get the value of time and store in the shift register.

  When I get the second higher than the limit value, I'll get time and subtract the previous value.

• use the time stamp value find value Y in another waveform

  Hello, there, I'm using labview 2013 sp1. I'm sorry that I can't use a picture to describe the problem.

  The wizard sampling DAQ 2 waveforms of 2 channels to HAVE

  Want to use mounted on board one of the waveforms as the triger to get the value of Y to another waveform (as was done with an oscilloscope)

  I tried method 2:

  1. the useto separate a waveform to and use to get the time of adjustments

  2. always use

  and use to get the timestamp.

  are - this method works?

  the problem is how can I use the value of time I've learned very well the value of Y in other waveforms?

  Thank you much in advance.

  I'm sorry you use screw Express, and I'm even more sorry that you are using the dynamic data type.  Using these are not your fault, it's that NEITHER recommend for new developers, but you tend to not have as much control then you type using more stringent data and write the code yourself.

  Using Split signals you can withdraw all of your signals since the type of dynamics and process data of each.  Don't know why you would use signals select but which, in my opinion, they do the same thing.  Then, you use DDT to to get your data into a format that is more useful.  Select the Conversion of a single waveform.  The explanation I gave in my previous post is valid.

  Joined a VI that does what you want.  You can see that once you have a waveform and its components, you can do a much better job.  Like finding the Min and Max of a wave by using table functions.  It searches the first place where AI0 went above your trigger and then gets the value that AI1 was at this same level, which will be at roughly the same time.  Don't forget not that served it one after the other, so no two samples will be taken at the same exact time for most of the DAQ cards.  Few are simultaneous sampling.

• I bought last month, a computer model laptop sony vaio SVE151D11M. I did a recovery of the value. How to get

  Dear...

  I bouight last month a Sony vaio laptop. Model SVE151D11M

  I did a recovery of the value.

  Now, the computer no longer starts and demand for recovery disks.

  But I do not have such a set.

  How can I get a recovery set, so I start from my laptop again.

  Please help me and thanks in advance,

  Kind regards

  Down Jonker

  Hello, I need a cover for my Sony Vaoi SVE151D11M model

  Thank you

  Kind regards

  Down Jonker

• I tried for a week now, going through the recovery process several times to retrieve my hacked hotmail account and received no response.

  want access to the hacked account

  I have tried for a week now going through the process of recovery of many times and received no response.  Account trying to come back is * address email is removed from the privacy *.  I opened again for you contact I need this back to an old more than a years of contacts and make extremely pissed of unanswered I provided a lot of information and been on the forum all useless as no responses.  I have provided with phone and everything that it is to continue to take money from me and do me not answer and account access.  I explained to him that, on July 20, I opened by mistake a spam that caused this problem.  I just need someone to respond and help and not to ignore me as obviously due to no contact I no longer exist.  Please send the answer to * address email is removed from the privacy *.

  Hello

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  Sorry, we cannot really offer any real help.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">