recovery system does not open

Similar Questions

• The local policy of this system does not open an interactive session

  I can't log on by using windows xp. (Not remotely). Error Msg: "the local policy of this system you cannot open an interactive session. But I can't enter using administrator. Only local users can not enter. Can someone help me?

  This problem may occur if the policy 'Deny local logons' is set on your computer.

  Go to local security policy.
  Go to security settings
  Local strategies
  User right assignment

  Find the refusal to logon locally. Remove users who are unable to connect.
  However, do not add Everyone group as then nobody would be able to log on locally.
  You will need to sign out and then sign back in before it takes effect.

  Let us know if that helps.

• I am running Vista Home Premium (although upgrade automatic is activated, the system will not install SP1.) Support Ms called and they asked me reinstall the OS. I did and the same problem.) I have Toshiba Satellite laptop. My system does not open the

  How can I open files to .phtml?

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the correct help it.

  See you soon. Mick Murphy - Microsoft partner

• Recovery Manager is not open / create recovery discs

  I have a laptop of G61-410SA and have problems with the hard drive. So, I would first try to reset it to factory settings. Now, I would like to create the recovery disks, but the Recovery Manager does not open and when I go through F11, creating a disk is not available.
  The laptop has always worked with Windows 7 x 64, never been updated. Out of warranty however. Have had a lot of blue screens and now 303 in diagnosis. Always be able to start, but very slow.

  Is there another way to create these disks, I can see the recovery in D partition.

  Thank you.

  At this point you can consider purchasing at HP or HP partner. They are fairly cheap ($25,00 USD)

• My computer will not open certain programs, and the system does not.

  I have really no idea what's wrong with my computer, so I'll just list the symptoms.

  The first and foremost problem is that my computer won't open some programs.  First thing I noticed when I tried to open iTunes and it did not open, no matter how many times I tried.  I went to restart my computer, and that opens up a host of new questions.

  My antivirus - Windows Live OneCare - software does not open.  I tried to turn on Windows Defender for malware, but it crashes when I try to do.  Not only does iTunes opens, but neither a few other programs I have on my computer--mainly those who could help me to solve this problem, such as the restoration of the system.  When I try to uninstall a program - all - nothing happens and he refuses to let me try to uninstall anything else, insisting something is already uninstall.  And my computer can't detect my printer.

  Which leads to my other problem: I have two computers connected to a network via an Ethernet cable.  The other computer is fine and can access the Internet fine, but when he sends something to the printer, nothing happens on the end of the printer.  It is a red 'X' the symbol of my network on my computer in the lower right corner (next to), so I guess this confirms my concerns about the network.  I don't understand what exactly is the problem, just that the other computer cannot print (it is not connected directly to the printer, mine is).

  Because Windows Live OneCare and Windows Defender does not work, I can not scan to see if it is the result of spyware or malware.  And because whenever I click on the system restore, nothing happens, I can't restore the computers to something else.  I'm completely stuck.  More critical functions simply do not work.

  If you have Vista then the Windows 7 upgrade that will take and install without problems, but the editions between operating systems need to be adapted, Home Premium, Home Premium edition, or higher, you cannot switch to a lower version.

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-AU/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  You never provided the installation diskettes, it's unusual for OEM nit of a recovery hard disk Partition.  Check any manual provided, or go to the manufacturer's Web site and see that your machine is delivered with.

  Failure one of the reasons for CD or DVD boot's Boot in the Bios options to have the hard drive initialization before any other media.  You may need to check the settings in the Bios and put them accordingly.

• HP ENVY PHOENIX 800-030qe: the system recovery media does not support this computer

  Hello!

  I can't recover to factory settings using recovery media (4 DVD) after changing HD (the previous device has crashed/broken).  The message is: "the media recovey system does not support this computer. You are not able to restore this system with this media. »

  So, what should I do?

  Thank you very much.

  Luiz Borges

  Upgrade the BIOS/downgrade will not fix it unfortunately.

• System Restore does not open

  had problems with windows lock up
  discovered it was AVG 2011 Free running scans a updates, eventhough I set them to manual
  have you an uninstall was not well said there where missing files
  Open System Restore went back 8 weeks to make sure I covered everything
  He restored the pc so I could get out on the internet
  an uninstall program third to clean avg
  installed windows security
  did a scan no problem, ran spybot without problems
  tried to run other programs that Win Media Player does not open, System Restore will not open now.
  but Procexp .exe indicates that the restore open file, IE8 opens a not defined get java script correctly, a pop-up site blocked blocking are set correctly I am now on firefox, it sews and work on all sites
  think that avg might have done a job on the pc found four (4) other lines that said avg2011 could start he's trying to make bad updates
  Thanks for any help
  jsaw

  Hello

  · What is the number and the model of the computer?

  · What is the full error message and the error code that you receive when you try to open windows media, restores Player system and internet explorer?

  · What is the service pack installed on the computer?

  1 run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  2. for the problem with internet explorer, try them steps listed in the link below: how to resolve script errors in Internet Explorer on Windows computers: http://support.microsoft.com/kb/308260

  You can also follow the steps in the link below: Troubleshooting for problems when you try to use the System Restore tool in Windows XP: http://support.microsoft.com/kb/302796

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• I can't open a picture jpg with my PS. I have already created another profile to my Mac, reinstalled Ps and one I updated the latest version of the operating system. Still does not open JPG. I want to know what to do next.

  I can't open a picture jpg with my PS. I have already created another profile to my Mac, reinstalled Ps and one I updated the latest version of the operating system. Still does not open JPG. I want to know what to do next.

  Then, you install Camera raw version 9.4 from this link: Camera Raw of Adobe Photoshop CC and CS6 Installer

• Can I still use Photoshop on Mac OS 10.10.4 CS5.1? It does not open now that I updated the operating system. Error message: unexpected and unrecoverable error occurred.

  It does not open now that I updated the operating system. Error message: unexpected and unrecoverable error occurred.

  Can someone direct me to a patch file or a plugin that can solve this problem?

  Thank you!!

  Download 5.1 here: test of download Adobe CS5.5: direct links (no Assistant / Manager) | ProDesignTools

  Follow the Instructions of the very Important until you do, or the link does not work.

  If you have registered CS 5.1, you should have your serial number. Otherwise, run the installer and see id he'll do a repair.

• HP Envy m6 1105dx: HP Support Assistant does not open

  I can't open HP support Assistant. It was working fine. I read about the update to the latest BIOS and drivers to prevent the thermal shutdown. So I solved this problem by updating the latest BIOS and drivers. After that HP support Assistant does not open.

  I tried to uninstall and install. I did the system recovery - undo basically worth more of a day's work, updating things. Still can not HP support Assistant to open.

  Although the search of this forum, I found that many people have had this problem. We are recommended to update to the latest drivers. But if you do this, then you have other problems.

  We buy computers to help us do our job. But it's frustrating when we meet to spend days trying to bypass a system that does not work properly.

  Help, please!

  Hello! @RBpromise, thanks for the reply.

  That you were unable to download the support assistant by using the link provided.

  Please download HP support assistant using the link below.

  Link: http://ftp.hp.com/pub/softpaq/sp77001-77500/sp77062.exe

  I would like to know if it works!

  Have a great day!

• HP Support Assistant does not open

  HY!

  The HP Support Assistant on my computer won't open. When I doubleclick (or attempt to open in 'programs'), I see - for about a second - it square with the blue box in it. But after a second (it's actually even shorter), the place has disappeared and the support Wizard does not open.

  Do you have any tips for me? A few days ago it worked perfectly well.

  Thanks in advance!

  go to Control Panel then click on uninstall a program or programs and features. then uninstall it. You can reinstall from hp.com software & drivers (if you have the product number, I could send a link here) or by reinstalling software recovery system reinstall. Click Start, then typed in recovery on the search at the top of the start button bar. Open the Recovery Manager, and then look for the option for reinstalling the software and that you see HP support assistant, and then click Next, be very vigilant on this options do not click "system recovery option.

• File in the windows Explorer 8 does not open

  Hi everyone, I hope that all do you well

  I have problem with my file Explorer in windows 8, that it does not open when I click on file Explorer it stop for a period and relatives and so on

  the hope of finding assistance; Thank you for all

  Hello

  Each method/step below progresses to another if the first does not all corrupted files which are, etc..

  Have you read this information from Microsoft on the repair of errors and corrupted system files?

  «Use the System File Checker tool to repair missing or corrupted system files»

  https://support.Microsoft.com/en-us/KB/929833

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If not, then run the Dism/online/Cleanup-Image /RestoreHealth command to repair damage to the component store,

  Repair-WindowsImage-online - CheckHealth

  Repair-WindowsImage-online - ScanHealth

  Repair-WindowsImage-online - RestoreHealth

  Restart the PC afterwards, and then retry the command sfc/scannow .

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• iTunes account link does not open to change credit card

  Hi, I'm stuck.  I've been using paypal to buy my iTunes, now I get a message that I have an expired credit card but I can't open the link account to go and see what happens... nothing happens, just of sits and does nothing... when I was on via iPad says I should do by computer which is where it does not open... I am trying to download a book I just wrote, won't let me go any further and I'm about to go to the Kindle and forget it... ideas anyone?

  ".. When I got says iPad that I had to do it by computer, i.e. where it does not open... »

  Make sure your iMac software is up-to-date, OS X and iTunes.

  Open system preferences > App Store, then click on: check now.

• Mac Mini - Finder does not open

  I have a Mac Mini with os x 10.10 2014.  The boot disk was almost full and the finder does not open.  I open the iPhoto and deleted the pictures and then empty the trash in iPhoto.  By logging in as a different user, I see I have ~ 1 GB of space, but when I log on my main account and admin the finder does not always open.

  I read that it was a known issue:

  http://forums.MacRumors.com/threads/Finder-doesn.

  It is said to remove the .plist files, but I can't get to Terminal to do.

  Please advise, thank you!

  Edmund

  If you were able to connect as another user, the issue is not lack of storage - this is the same computer.

  Yes, your .plist file may be corrupt, or you could have an extension conflict that affects only your user account.

  Try the start mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system does a lot of cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.