Recreate the image on new computer or former

Similar Questions

• replaceable hard disk on almost identical machine or recreate the image?

  I have an old Dell Latitude D830, which seems to have a dead motherboard.

  Its backed up and photographed using Windows Image in Win 7 Ultimate.

  Search on ebay for an identical machine so that I can just swap the HARD drive or recreating the image.

  Those that I find is built within months of the mine, but have slightly improved processors.

  Mine has a core 2 duo t7250 and some that seem to be good have the same thing with a t7500.

  He screw it all or if it's similar enough for a HARD drive swap might work.

  If this isn't the case, a HARD swap disc then a new image perhaps?

  IF I bought a replacement motherboard would only be re-inage?

  Thanks for the help.

  As long as the Windows 7 Ultimate FULL retail sales license, you can transfer; read this part of my answer.

  If this is an upgrade license, you can transfer it to another computer, but you need an operating system that is installed to upgrade.

  When you move a BONE on another machine, clean install is the recommendation

• 210 mobile G1: how to recreate the image on a laptop with Windows 7 210 installed on the device

  Hello

  I try to put an image that has been created in the image of fog service 1.2 and am having problems starting the fog in ipxe. I tried to update the chip set drivers and the network drivers with no luck. When you start first in ipxe, the machine acts like it wants to register the machine, but then it just keeps restarting. I can never get fog gui so that I can recreate the image on the machine. Any suggestions on what I need to do to make this work. I have 30 laptops to recreate the image.

  Thank you in advance,

  Angie

  Step 1: Copy the Source files to the PXE server

  In this step, you copy Windows PE source files to your PXE server.

  1. On your computer, click Start, point to programs, point to Microsoft Windows OPK or Windows AIK, and then click Windows PE tools command prompt.
     The menu shortcut opens a command prompt window and automatically sets environment variables to point to all the necessary tools. By default, all tools are installed in C:\Program Files\\Tools, where can be Windows OPK or Windows AIK.
  2. Run the Copype.cmd script. The script requires two arguments: architecture and destination location of the hardware store.
      

• How can I disable the Mappoint 2006 for the installation and the reactivation on new computer

  How can I disable the MapPoint 2006 for the installation and the reactivation on new computer

  This forum is for posting comments on the web site of Microsoft Answers, only not to ask questions of Mappoint.

  Mappoint forum is here: http://social.microsoft.com/Forums/en-US/streetsandtrips/threads

• Recreate the image MARCH issue 20

  When I try to recreate the image on my device on 20 MARCH with the ISO collection downloaded from the OCC and I burn the ISO as it says when booting from the DVD it gets to the menu to choose how I want to recreate the image and it crashes.  We never saw this, and how solve you this problem.  I had 3 different devices and they all do the same thing.

  Hi James.

  When I try to re-image my MARS 20 appliance with the recovery ISO downloaded from the CCO and I burn the ISO as it says when booting from the DVD it gets to the menu to select how I want to re-image and it locks up.  Has anyone ever seen this and how did you fix it.  I have had 3 different appliances and they all do the same thing.
  

  You are connected through the Console directly (VGA + PS/2 keyboard) device, right? If you are using a USB keyboard, try a PS/2 keyboard instead.

  In addition, if it is a model CS-MARCH 20, make sure you select option '1. Distributed March - controller Local", not the #3 option (i.e. option valid only for models generation material 2)."

  If none of the foregoing is the cause, then it looks like a problem with the burned disc.

  • Verify the signature MD5 from your local copy of the. ISO image file matches what is shown on cisco.com.
  • Re-burn the ISO image to a disc up, forcing a 'slow' burning speed (4 x or less), try a different brand of media as well (I ran into a few cases where when other media brands have been used, these types of questions went).

• Get the image of Excel as a form and save it as a .jpg

  Hello

  I am fairly new to ActiveX and will have a hard time to do a seemingly simple thing: get an image named from an Excel file and save it as a .jpg file.  I've seen similar things for Excel chart objects, but as I understand it the images are "shapes" in Excel and I was unable to find the right method to extract a form. Please, if someone could look at the folder below and tell me if I am on the right track, if there is a better way to do it, or if there is a way to do it at all, it would be useful.  Note that I don't like not how effective a strategy - if I need to register in a middle of another type file, that's fine. The only goal is to be able to extract this image and save it with a click of mouse and without manual intervention.

  Folder contains: 1 example Excel file containing the image named "picture 1"; 1 vi showing the method I found for the export of Excel graphs as .jpg; and 1 vi with the progress that I've done so far tried to get the picture of the Excel file and save it as a .jpg file.

  Thanks in advance!

  Megan

  Hi megan,

  See what link.

  It will be useful.

  Mike

• Transfer the OS to new computer?

  My wife and I are both due to new computers, I can transfer our XP operating systems to new computers?  I'll - never - the new windows OS and we will simply have to go to another system, if it is impossible to keep our Windows XP in the new cvomputers.  I'll even buy new computers with Windows XP installed if someone who does it again.  We currently use Systemax I built several years ago by CompUSA, but now they're gone. Thanks in advance for any help...

  A much better choice is to keep your computers XP and running, as a lot of the XP applications may not even work on Windows 7 or Windows 8. Keep your antivirus software up-to-date, or disconnect the computers XP of the Internet (to keep them safe), once you get a new computer.

  Windows 7 is a closer match for XP that Windows 8 and HP has renewed their effort to sell computers Windows 7 Basic.

  If you are looking for a desktop computer, see here: http://shopping.hp.com/en_US/home-office/-/products/Desktops/Desktops?SearchParameter=%26%40QueryTerm%3D *%26ContextCategoryUUID%3DOp0QxXjbaUcAAAE0eehcZzOt%26os_facet_desktops_dte2%3DWindows%2B7%26%40Sort.TieredPricing%3D0&PageSize=15&SortingAttribute=TieredPricing-asc

  For laptops HP Windows 7: http://shopping.hp.com/en_US/home-office/-/products/Laptops/Laptops?SearchParameter=%26%40QueryTerm%3D *%26ContextCategoryUUID%3DjeEQxXjbj14AAAE0syxcZzOW%26os_facet_laptops_dte2%3DWindows%2B7%26%40Sort.TieredPricing%3D0&PageSize=15&SortingAttribute=TieredPricing-asc

  ============================================================

  To preserve the XP in case of a look of failure of the hard drive Image backup solutions:

  EaseUS Todo Backup Home http://www.todo-backup.com/ V6.5
  Free version: http://www.TODO-backup.com/products/home/free-backup-software-features.htm
  User Guide: http://www.todo-backup.com/download/docs/User_Guide.pdf
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  Version 6.1 supports XP, Vista, Windows 7, 8 and 8.1

  Acronis True Image 2014 - has a 30 day trial version available, trial key sent by email.
  Note: Initialization of cloning and the road (creating a MBR) are not supported in the trial version.
  For the trial version, only pick up is available when booting from a Bootable Acronis media.
  Install Acronis and then create a bootable media restoration/rescue CD before you start creating your first backup image
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/support/documentation/
  2014 supports XP, Vista, Windows 7 and Windows 8

  J W Stuart: http://www.pagestart.com

  J W Stuart: http://www.pagestart.com

• How do I get a free copy of the Director of the image on my computer?

  It's an oficejet HP 5510 all-in-one printer.  I can't find the installation disk to get this software on my newer computer and I have Office 2007

  Hello

  There are dozens of free image editors, here's a list:

  http://graphicssoft.about.com/od/pixelbasedwin/TP/freephotoedw.htm

  Kind regards.

• How to recreate the image without disc

  I want to reimage my computer because I have a virus, but I bought a computer that has windows 7 pre installed - how do I reimage without a disc or where can I find the Office

  Some computer manufacturers, including Dell and HP, have a recovery partition on the hard drive of the new computers.  By pressing a special key combination when the computer starts, you can use the recovery partition to restore the computer to the way it was when it was new.

  If your computer has that, contact the computer manufacturer and ask an installation disc.

  After you have re-installed Windows 7, make an image of the backup system, that you can use to restore the system quickly and easily if necessary.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• AIP - SSM recreate the image in secondary ASA 5500 (failover) with virtual contexts

  Hello guys,.

  The scenario is as follows:

  2 ASA 5500 with virtual contexts for failover.

  The ASA elementary school has the work of the AIP-SSM20.

  ASA school (which is in active / standby) has its SSM20 AIP to work now and everything is in production.

  Someone tried to configure this 2nd AIP - SSM, changed the password and lost, so I tried to re - the image (without authorized passage recovery), but the connection fails on the TFTP server, where is the image of the AIP - SSM.

  Now questions, documentation Cisco re-imaging view orders under ASA #.

  but as this scenario has several virtual contexts the ASA # shell contains no IP address as you know (which I suppose is the reason why the ASA cannot download the image from the TFTP server) and switch to another context (ASA / admin #) re-imaging commands do not work (hw-module module 1... etc...).

  What is the solution? Is there documentation for it (with security contexts)?

  Thank you very much for reading ;) comment on possible solutions.

  Yes,

  Some things to keep in mind.

  (1) run 'debug module start' on the SAA before running the command "hw-module module 1 recover boot. This will show you the ROMMON of the MSS output as it tries to make the new image and you can look for any errors.

  (2) before trying to download from the SSM, first use a machine separate download tftp from your laptop. This will ensure the TFTP on your laptop works and confirm what directory (if any) that you can use as the file location.

  (3) if the tftp download does not SSM, then the SSM is unable to properly connect to your laptop. You need a crossover cable to connect your laptop to the SSM. If you have a crossover cable, then you could try to connect the MSS and your laptop to a small hub, or configure a new vlan on your switch with only 2 ports and connect the MSS and your computer laptop this vlan 2 port.

  (4) also try the download first at the end of the gateway to 0.0.0.0 since your laptop and the SSM will be on the same subnet. If this does not work then you can try a non-existent 30.0.0.4 address as gateway.

  (5) understand that the IP address that you specify for the MSS using the command "configure the hw-module module 1 recover" is just temporary for download. Once an image is installed, then sitting at the module and run the "setup" command in order to configure the permanent address you want ure on external port of the SSM. This address in the "setup" command can the same as that used in the command 'get the 1 hw-module module configure' or a completely new (as in your case). Just make sure that you connect to the network just to what address you give.

• Recreate the Image sensor 4235FE problem

  I can't connect to the device ID using SSH and account netrangr and su more late-root. But although I had the sign #, when I run the terminal command configures, he returned with a configuration not found message.

  Here's a screenshot...

  Last login: kills Jun 1 18:22:03 2004, by 10.31.166.30

  Sun Microsystems Inc. SunOS 5.8 generic February 2000

  Sun Microsystems Inc. SunOS 5.8 generic February 2000

  You have logged out of the 10 using vt100

  using DISPLAY = 10:0

  [email protected] / * /-inside: / usr/nr

  > su-root

  Password:

  Sun Microsystems Inc. SunOS 5.8 generic February 2000

  # configure terminal

  Configure: not found

  #

  I checked my working directory is the root. See below

  # pwd

  / root

  # ls - al

  Total 25490

  -rw - r - r - 1 root other 7784 11 May 15:01 - r

  drwxr-xr-x 4 root other 512 11 May 15:10.

  drwxr-xr-x 21 root root 512 20 May 16:03...

  drwx - 2 root root 512 .ssh December 6, 2001

  -rw - r - r - 1 root other 69680 r 11 May 15:00

  drwxr-xr-x 2 root other 512 tmp December 3, 2003

  Note that when I'm in the root, the cursor reads that #, it does not read XYX # where XYZ is the name of the sensor. Does this mean something? This is why I am unable to make the terminal command configures. The device also does NOT recognize the command configures the sensor either.

  What directory I was in before I can issue the terminal command configures. I connect remotely using ssh. The device's ID NetRanger 4235FE.

  Personally, I would get a free exchange on your old 4230-FE for a new 4235-FE. There is a bulletin for 4230-FE sensors that indicates that they are subject to a motherboard failure. Cisco to exchange your old 4230-FE for a current 4235-FE. Follow this link: (http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_field_notice09186a00801850de.shtml) and fill out the form. I traded my sensors 8 and got the last expedition just 2 weeks after submitting the paperwork. I find this very much, since the 4230's are anyway end of sale.

  Now, the answers to your questions:

  (1) the CD upgrade you received must be Version 4. (1) S47, this is your starting point.

  (2) to install the image on the sensor, that you should just hang a keyboard and the sensor screen, insert the upgrade CD and allow it to start. The installation process is very intuitive. After installation, the sensor will reboot. You can connect the sensor freshly installed with the name of user and password cisco/cisco.

  (3) see #2 above

  (4) the command and control interface is the port through which the sensor can be controlled and the interface through which it makes alarms to external sources. After the basic installation, you can connect to this interface with a cord connection (crossover) or via a switch (straight through) and use IDM (GUI of the probe).

  (5) see responses to the tightening of the bolts 2 and 4 above.

  2nd n ° 5) the 4230-FE and 4235-FE have all two CD players.

  (6) this is a good starting point for more information about the Cisco IDS sensors (http://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Software:Cisco_IDS_Sensor_Software)

  I hope this helps.

  Don

• Need to recreate the image tool for px4 - 300 d

  I have a PX4 - 300 d, which was not used for some time, and readers have been removed for something else. I'm looking to return to service as storage for a VMWare ESX host iSCSI. I put new readers in and started, it took a bit, but she finally found the dhco server and made an IP address. I can access the px4 - 300 d, but it's a secutiry configuration screen and I can't spent to set up the storage. Is complaining about the Security screen "can not configure security up to this storage is configured.

  So I'm in a catch 22, so I want to just reload the firmeware and start from scratch. There is no data on the drives, nothing in the configuration of the PX4 - 300 d, which is necessary.

  And the best thing is the big missed 30 days ago and support is not interested to talk to me. they will provide this utility? I know it exists they sent me a version of it about 2 years ago although he has failed, they had to send me a replacement unit.

  Anyone know how we can get a copy?

  Thank you

  Jmorrison919,

  The imager can be engaged on the forums, but you can contact support here:
  https://Lenovo-na-en.custhelp.com/app/ask/

• I want to recreate the image on my laptop but I'm going to lose my microsoft software?

  I want to get my laptop reconfigured sometime soon, but I want to install my microsoft first pack, I can start on some work. But if I do, will I lose my through my laptop microsoft software being released image? and I have to install another new microsoft pack?
  Thanks, I hope you can help.

  Hi Sophie,.

  As long as you have a software license, after creating the image you can reinstall the same on your laptop!

• haveback upward through windowsliveonecare for computer, external hard drive wentdown and now wantto get back to the top but new computer does not recognize the direct care

  drive external upwards using a windows live care, computer went down and now cannot recover save as new computer says it does not recognize backup Installer direct care. How doi recoverbackup on the new computer.
  Thank you
  E-mail address is removed from the privacy *.

  Hello

  Webcam Live One Care is no longer available.

  Please read the information contained in this thread about your problem (Steve Boots information link):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/i-have-uninstalled-OneCare-and-would-like-to/d2d196a5-e46f-4E48-9d94-5c217f758134

  See you soon.

• install the printer on new computer

  We have a new computer with windows vista and I can't install the printer: hp laser jet 2015 d

  I changed the usb cables to make sure that the cables are good.  Printer lights.  Onlight button is lit.

  I tried to use the online game up.  I inserted the disc.  My photosmart printer is installed and works very well.  Help, please!

  You may need a new driver compatible with Vista.

  Support HP & drivers

  http://welcome.HP.com/country/us/en/support_task.html

  You can try their automatic product detection tool.

  I hope I could help