Rede of transfer between maquinas vm esxi lenta e física

Similar Questions

• making data transfer between two computers

  Hello

  I developed a labview for data acquisition goal program.  I need to run a part of my program in a computer and some said in another separate computer. for data transfer between these two computers, I decided to use the Protocol of data taking. a computer, collect data and send data to the second computer and second computer will control the setting of data acquisition in the first computer. now I have developed the program but it does not work. I wonder if that is enough to link these two PC by a network cable or something needs to be done. of course, I have some problems with the source definition in the Protocol of data taking. need two labview program in two separate computers.

  Best regards.

  the problem is resolved.

  transfer of data from socket, simply connect two computers with a LAN cable, as I did. The problem is the URL parameter. I got the error as follows:

  ==> in main and remote program, the URL must be the same and the computer name that data socket server is running must be incloded in the two URLS. (my mistake was that I had used two different URLS in the main program and remote). either way, I realized that this isn't neceessary to Server execution data socket in the two computer.but that that send data.

  concerning

• Transfer between Cisco ASA VPN Tunnels

  Hi Experts,

  I have a situation where I need to set up the transfer between two VPN Tunnels completed in the same box ASA. A VPN Tunnel will incoming traffic and that traffic should be sent to the bottom of the other VPN Tunnel to the ASA. The two VPN Tunnels are from the Internet and speak with the same IP address of the ASA peers.

  Retail

  Tunnel A

  Source: 192.168.1.0/25

  Destination: 10.1.1.0/25

  Local counterpart: 170.252.100.20 (ASA in question)

  Remote peer: 144.36.255.254

  Tunnel B

  Source: 192.168.1.0/25

  Destination: 10.1.1.0/25

  Local peer IP: 170.252.100.20 (box of ASA in question)

  Distance from peer IP: 195.75.75.1

  Can this be achieved? what configurations are needed in the ASA apart cryptographic ACL entries?

  Thanks in advance for your time.

  Believed that, in this case your config is good, and you can avoid using routes on your asa since it must route based on its default gateway, make sure you have good sheep in place rules and the inter-to interface same-security-interface allowed return you will need.

• Transfer between Zune and iPod Touch music

  Transfer between Zune and iPod Touch music

  Does anyone know how to get the Zune music on iPod touch?
   
  It is requested before, but that was over 2 years ago.  Maybe there's a new solution?

  Hello

  The question you posted would be better suited to support zune.
  http://answers.Microsoft.com/en-us/Zune/Forum
  http://www.Zune.NET/en-us/support/

• Cannot migrate VM between 5.5 ESXi versions: the version of the product to the destination host does not support one or several CPU features

  We receive an error message that I am trying to make sense. I understand very well the notion of compatibility, CPU, CPUID, masking and so on, after working on a competitor hypervisor. However, this error seems wrong (or needs better wording) based on my understanding:

  Here is the message:

  ----

  A general error occurred: the version of the product to the destination host does not support one or several features of the CPU currently use by the virtual machine.

  Characteristics of CPUID level 0 x 1 'ecx' register are indicated with a '1' bit: x00x:xxx0:xx0x:x 000: x 0 11xx:00: 00xx:11xx

  ----

  
  

  This happened during the migration between two hosts ESXi with the same physical processors - in this case, a Westmere X 5650.

  
  

  The source host is on ESXi build 2068190 (5.5). The destination host is on ESXi build 1474528.

  
  

  The bits it seems to complain are:

  
  

  DTES64

  Monitor/MWait

  Cx16

  PDCM

  The punch line seems to be: "the product version of the destination host. However, I have trouble believing that support for these features have been added to ESXi between the two versions. If it were, VMware has been certainly silent about.

  For what it's worth, explicitly set us the CPUID masks in our virtual machines (no, CVS is not an option for us at this time.) This is the mask:

  CPUID.1.EAX = "00000000000000100000011001010001".

  CPUID.1.ECX = "00000010100110001110001000111111".

  CPUID.1.EDX = "10001111111010111111101111111111".

  CPUID.80000001.ECX = "00000000000000000000000000000001.

  CPUID.80000001.EDX = "00101000000100000000100000000000".

  cpuid.d.EAX = "00000000000000000000000000000000".

  cpuid.d.ECX = "00000000000000000000000000000000".

  cpuid.d.EDX = "00000000000000000000000000000000".

  Note that the bits of the message complains (2, 3, 14, 15) * are * in fact forced to '1' in our mask of cpuid.1.ecx. That means (if I understand correctly), ESXi does not have the virtual machine unless the host processor supports the feature. And in our case, the virtual machine will start with happiness on nodes, with both versions. It will be not simply migrate between them.

  So, long story short, is this a bug of ESXi? The error message is misleading? I understand something?

  Thank you

  
  Matt

  To use the masks feature VM in this way, you must replace all the 1 to your masks with-'s:

  CPUID.1.EAX = "00000000000000-000000 - 00-0 - 000-

  CPUID.1.ECX = "000000-0-00--000---000-000---".

  CPUID.1.EDX = '-000 - 0-0 - 0-

  CPUID.80000001.ECX = "0000000000000000000000000000000 -"

  CPUID.80000001.EDX = "00-0-000000-00000000-00000000000.

  cpuid.d.EAX = "00000000000000000000000000000000".

  cpuid.d.ECX = "00000000000000000000000000000000".

  cpuid.d.EDX = "00000000000000000000000000000000".

  Zeros erases the features that are not available on your hosts Westmere, and dashes will leave the other one features.  The problem with those masks was forced to you certain features on who would have normally been off.

• The traffic between a host ESXi and vCenter Server is secure?

  Dear team,

  You pray let me know is traffic between a host ESXi and vCenter server (vice versa) is secure?

  The VC and ESXi version is 5.1U1a

  concerning

  Mr. VMware

  Default SSL certificates are installed automatically. However, you can configure the third-party SSL certificates to make the environment more secure.

  Please see:

  VSphere Documentation Centre

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-51-Security-Guide.PDF

• Differences between ESX and ESXi

  Hai,

  As I am new to VI environment I doubt that where features ESX and ESXi are different, it may be stupid but can help me a lot.

  Hello

  Please check the link to the differences between ESX and ESXi below.

  http://www.VMware.com/products/vSphere/ESXi-and-ESX/compare.html

  Please note ESX is present in version 3.x, 4.x. starting vsphere 5.0, we have only ESXi.

  ESXi doesnot have a service console and has the smallest footprint of 70 MB and so is safer and more reliable, because it has a smaller surface set.

  Please allow points if you find the article useful.

  Thank you

  Aakash Jacob

• Travel/cloning between two hosts ESXI VM

  Hello

  I have two hosts ESXI 4.1 with VSphere Essentials for VCenter license. I'm not able to move the virtual machine to one ESXI host to another (power off). It is not supported with VSphere Essentials license? Data warehouses can be shared between the two ESXI hosts?

  What is the size of your virtual machine, what is the speed of the network and how your local storage looks like? Using RAID? How many disks and RAID level? You have a battery attached to the RAID controller write buffer cache?

  The waiting period does not necessarily mean the tasks does not work. Often it is only a delay in the vCenter Server GUI, but the process is still running and you just need to be patient. You see the files being created on the target data store?

  André

• store of data sharing between ESX and ESXi?

  Hello everyone

  This is something I have not yet tried, but is it possible to share the same store of data between ESX and ESXi (version 4)?

  /MH

  Without a doubt.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Folios of transfer between accounts

  Hello

  Almost finished our first kiosk application (we have a Pro account), but have encountered a problem. We created all our different folios in InDesign with an Adobe admin e-mail account, in order to test them locally on devices using content displays. We then have them finalized within the DPS Folio producer and published. During this time we created the Viewer application and downloaded successfully for testing.

  But... by creating the Viewer, we had to create a new account (ID, title), he would not accept e-mail from the Admin as the title ID problem, that is, we have a working application that does not recognize the folios, as they were created with a different ID... So, how can we transfer these slips to a new ID that matched those in the Viewer? If not, is there an easy way to give the ID of administrator the rights necessary to act as a title ID in the Viewer?

  In the contrary case, we will have to rebuild all of the folios in InDesign with the new title ID... and add metadata that is associated with truck loads!

  Y at - it a shortcut, or is it back to the drawing board for us?

  Thank you

  Currently, there is no quick way to transfer between accounts folios. The engineering team working on a solution to be able to transfer between accounts folios in the near future.

  But wait, there is a quick solution to this

  1. Login to your Admin account and share folios you want to transfer the ID of "title" you created above
  2. Connect on InDesign Folio builder as title ID and create a new folio with no article in (remember the name of sheet)
  3. Now connect on your dashboard and 'open' that folio that was shared from Admin ID to your title ID
  4. Now under each article, you see a drop-down list and an option ' copy to '.
  5. Use the "copy" to copy each item one by one in this new empty folio created in step 2

• Sharing folder file transfer between accounts

  I used Migration Assistant to copy files between an old Machine to Windows Vista and a new iMac running El Capitan.  I had to create a new temporary account on the iMac to receive files.

  I try to use the Shared folder to move the files to the main account iMac that has administrator privileges.

  Once logged into the temporary account, I can copy the files in the Shared folder.

  When I go on the account of the first iMac, the copied files are marked with red '-' sign indicating that I don't have the privileges to access.

  I thought it was the accepted method for copying files between accounts but need ideas on how to overcome this barrier.

  Files in the ~/Public are visible to all users on the Mac. But only this user can modify or delete the files.

  If you want to copy the files directly to the real user-> connected on the temporary account, copy the files into/Users/realUserName/Public/Drop box.

• Transfer between disks

  I would like to make a transfer of disk to disk from a 1 t external HD to my internal HD 320 G. All of the data to be transferred are 47,44 G so I know it's possible, but I was wondering if there is a procedure particular especial about courses between two different size HD? Data on both drives?

  Sparkgapper

  p.s. I intend to use drag and drop procedures. for example, drag the external HD icon to the internal HD icon.

  The difference in hard drive size is not serious. Drag and drop the files you want, moved, not the icon.

• The data transfer between the processor host RIo for PC

  I have two tables of data that I need to send to the sound card so I can listen to. Data on the processor of Rio. I realize I can write a file wav or something else, but I need the data streaming in. I can do this easily on the single PC of course, read and write to the card sound (or ADC/DAC etc.), but on the processor of rio, there is no card sound for obvious reasons and so I need to transfer data from a level to the PC. What is the best way to do it?

  More information, these data were acquired of a RIo FPGA and transferred via FIFO for Rio processor.

  Hello

  There are several available network protocols to transfer data from your target in real time to the pc. This article covers the pros and cons of those commonly used with LabVIEW Real-time.

  For dissemination of data tables between LabVIEW screws (one on the RIO, one on the host computer), I recommend the network stream if you use LabVIEW 2010 or later.

• When I use the wizard to transfer between Windows XP and Windows 7 files disappears from Windows XP?

  When I use the files and settings between XP and 7 Transfer Wizard files on XP removed or will I still have the original as files?

  The files and Settings Transfer Wizard won't work on Windows 7, you must use Windows Easy Transfer.  But in both cases, the original files are copied only - not deleted.  They remain on the source computer.

• Data transfer between PC and device

  Hello

  I need an advisor. I was wondering what would be the best way to transfer data from the PC to a connected device?

  Here's the scenario: I need to download a large amount of data from a web service. To do this, I use a small application installed on the user's PC. Once the data is downloaded and converted, the application converts it to an xml file. I would push this file or string with the XML itself to the device that will be connected through the USB port.

  In addition, the scenario reversed: I can access the PC to the device file system?

  Thank you

  Daniel

  Hi Daniel,.

  You just need to synchronize data between PC and device and device to the PC. I'm wrong?

  There are 2 ways to do it.

  (1) Intellisync APIs, (Director of office requires)-net.rim.device.api.synchronization

  (2) USB connection. (Doesn't require no Office Manager)-use streamConnection

  You will get the USBsample in samples of JDE. I guess that as the example of synchronization is in examples of JDE applications.

  Please reply,