Redirect based on IP source address?
I have a site I don't want our competitors to see! By tracking code, I managed to get their source IP addresses.After looking around, there is a solution to my problem of .php but my host is not well suited to the .php files (even if it's a treatment).
My pages are in .shtml (to deal with the drop-down menus css correctly) and I understand that this attachment code, if put at the top of the page before anything, will work.
I managed to get a http://www.donbur.co.uk/gb/newindex.php job, but finds it difficult to get this code to work elsewhere.
The problem is, when I try to put this code in one or other model as an inclusion, it won't process correctly or page will not be displayed at all.
I have to use the .php files or add in a .shtml document php script.
Really confused now... Help
Thanks for the constructive advice...
Quote:
> After looking around, there is a solution to my problem of .php but my host is not well
> suitable for .php files (even if it's a treatment).What does that mean? Your hosting plan includes php support it or not?
You can not just put a php script on any page. It must be a .php page, or you will need to reconfigure the server to analyze the other pages for php. But if your hosting plan does not support php then it will not work in all cases.
My host is BT Internet and they claim not to treat the .php files that's why our site main .php is hosted elsewhere; However, it seems that, even if it's hard (to clarify: don't) with main complete scripts, it does not seem to treat simple
It was suggested on another forum that the .shtml files are set to be recognized by .php in the cpanel, but our host will not do that...
Our competitors are not particularly intelligent or up to date and it was pretty effective; However, I am inclined to the best judgement and close this topic.
Tags: Dreamweaver
Similar Questions
-
Firefox has detectedthe server redirects the request to an address in a way that will never end
Firefox has detected that the server redirects the request for this address in a way that will never end it is verbatim it's never happened before
We have the same problem. Ours is a little out of the ordinary that we have a web application that displays pages based on a configuration of a database for the "namesake" page is created over and over again that our users make their way through our investigations.
Is there a method on the side Server things, what can be done to stop this error from appearing? We tried some experiments as alternating in the title of the page, redirect between two different pages but FF still think it is to see the same page over and over again.
We would love to be able to support FF for our clients and their customers (those who take our surveys) and it is a crucial issue at the moment for some of our customers worldwide.
Any help would be greatly appreciated.
Thank you
~ Dave Carr
800, Inc. service.
[email protected] -
This week (01/10/12) I registered on youtube and now I can't log back in here or in my gmail account. I tried every fix-it/single remedy offered the FF forum but nothing works.
Any other work, all the sites that I frequent load fine, is youtube doing something on purpose for FF users? I can get the page youtube videos and see, but I can't log on, every time I click the sign in button, I get:
"The page is not redirecting properly".
Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
This problem can sometimes be caused by disabling or refusing to accept cookies. »
I hate to be a conspiracy theorist, I can connect to youtube without problem on IE, but I hate this browser. I use windows 7 and 15 FF. Can someone find it?
Looks like it's a firefox issue, because that never happened on IE, Safari or Opera on me.
You think not that a simple patch can solve this problem. I have to delete individual cookies every day. -
He repeated to me that Firefox has detected that the server redirects the request for this address in a way that will never end.
This problem can sometimes be caused by disabling or refusing to accept cookies.
Have you tried to clear the cache and cookies?
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
See also:
-
I was watching www.ustream.tv/decoraheagles for months. I started using Firefox about a month ago. Earlier today, when I tried connecting to the site, I received the message "Firefox has detected that the server redirects the request for this address in a way that will never end."
I went on your site and follow the instructions. This Web site was not in the blocked sites. He told me how to add it, and I did.
She still refuses to open this site.
Internet Explorer WILL open this site.Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
-
"The page isn't redirecting properly?
i receive this warning on a daily basis. it seems to occur whenever i open a message in gmail or try to send a message. anybody have a clue about this? thanks!
Firefox has detected that the server redirects the request for this address in a way that will never end.
* This problem can sometimes be caused by disabling or refusing to accept cookies.
See http://kb.mozillazine.org/The_page_is_not_redirecting_properly
-
What source address should the NI9862 module CAN be used to send messages j1939?
I am developing an application that will write and read on vehicle ECU road. I CAN NI9862 module and drivers XNET. I can read an ECU data. I can write a CAN bus frames but the ECU under test does not appear to read the message. I don't get any acknowledgement of bit type and the SHIELD in question (a dashboard) does not change its messages in anyway, nor change the gauges or witnesses.
Complicating this is the fact that the ecu is 'Brand X' and it is PGNs belong to someone. I tried to send the message of inquiry PGN (PGN59904) but get no response from the ECU. I use the 255 (global) as my source address.
Is there a source given for the NI9862 in J1939 address?
Thank you
There is no specific source for the NI9862 address. It can be used to simulate one of the 256 available addresses. If you try to simulate a test off-board tool, usually has an address of 0xFA.
I'm afraid that if you do not know the PGNs he expects or addresses that it expects to see, you will have great difficulty to operate.
Good luck
Bob Young
-
Hello
SQL query to find the total number of source based nonsource passangersbetween source and destination station and passenger station on the same chekindate.
Please help on this script and let me know if you need more details.
---
You use a SELECT statement. Let me know if you need more details.
-
Hello
I am currently facing a questions in my test harness which happens when I connect to public IP address on server security by the breath. No problem if I connect using view Client.
Using the breath, I can log on, select a desktop view, then the url of the Web page showing my ip Server security for about 10 seconds and then I was redirected to the private IP address of NAT from the desktop view target and of course I couldn't connect.
Note: The local private ip address redirection does not happens if I configured to connect to show the connection to the server through breath.
I have:
- Self-signed SSL installed without warnings
- activated the tunnel to connect to the server
- Tunneling on server security enabled
- disabled all firewall for testing purposes
- locally defined in the host file to resolve my domain name full of security server static IP used in my office. (vsecurity.icliq.com in this case)
- required ports are configured with port forwarding in my router from office
I hope someone could throw some light on this issue. Thank you
Eddy
Yes, the option of Blast Secure Gateway is used to ensure that Blast connections are routed from your browser by the server security (or connect to the server). That's what you want to access remotely. If you do not select this option, Blast connections will be direct to your virtual desktop. This is for internal connections.
It goes the same for PCoIP and PCoIP Secure Gateway.
Mark
-
Assign a static IP address via DHCP based on the Mac address of the virtual machine
Hi all
It is especially a feature request, as I'm sure that it is not currently possible to do what I want to do...
I would like to be able to assign static IP addresses to VM without having to manually configure the network settings of the virtual machine directly. I want to be able to do it from the DHCP settings in the virtual network Editor.
Most of the routers DHCP allow this. They give an IP address through DHCP based on the MAC address of the client. This means that the customer is concerned that he receives a regular IP DHCP address, but it is never change.
DHCP is the default option for all OS this makes things much easier to manage, as IP addresses is assigned in the same way, in one place for all DHCP clients, regardless of the client operating system, and without having to manually keep track of which the IP is assigned to which customers etc..
Also AFAIK at least for Ubuntu, you cannot assign a static IP address without having to also statically assign to the DNS server. It is only the IP address I need to be static, so I prefer not to have to worry about manually assign the DNS server.
I can just kind of fudge making the really long DHCP lease duration, but the maximum is 99 days only, so finally addresses are going to change, that would mean a whole bunch of reconfiguration for VM services, etc..
Does anyone know if the workstation 9 has this ability? I am currently on version 8, but I would probably upgrade this function only if she can do it.
If there is no way to do what I want to directly through the virtual network Editor, can anyone recommend a way to do this, perhaps using Guest only network and then, by running a kind of services to the 3rd party NAT and DHCP on the host?
Thank you
Eugene
There is no GUI option to get what you are looking for, but you can do it manually. Please take a look at Re: assign a static IP to guest with network adapter NAT Virt? where I posted an example.
André
-
Hive - Source address and Destination or a set of addresses
I have a financial client who has a question on the Source address and Destination or a set of addresses.
They must provide a Source address and destination or a set of addresses, with a mask of network. Oracle has the IP address and Netmask (s) they would need for booty? And they would be the Source or the Destination?
The INVESTIGATION period would come from the server of the hive? The Bank would need specific IPs or a range of IP addresses that will be used. So if all the Beehive exists in 123.456.789.xxx, they would be able to enter like this, but it is best to identify each IP separately.
Also, assuming that the Bank and Oracle are in communication, that can be at the Source and that can be the Destination?
If this isn't something that we can provide them, I may need something - an explanation--give them that could soothe their needs.
Any help on this would be greatly appreciated.
BrentBrent,
Communication between the Bank and the Beehiveonline would normally be via the IP 156.151.25.7, which is the VIP for BeehiveOnline. It would be the two-way channel for communications over https, webDAV and the owners of o and OBEO protocols.
The only time where we all change is if you use FTPS and because we put passive channels in place data transfer channel is given to one of the Middle-thirds to handle the traffic directly Bank to Oracle would be so throuigh 156.151.25.7 until the connection is established, and then the middle of the year-groups will manage traffic between the 2 extremities-this means that the traffic is two-way on one of the 3 the ip 156.151.31.35, 156.151.31.36, 156.151.31.37 addersses
I hope this will satisfy the Bank.
Phil
-
SFR - no policy of the 'rate of bandwidth limit' based on the source IP address
Hello security experts.
I can't find the policy of depending on source IP bandwidth rate limiting or a device of the type (in the case of mobile devices android or apple) on SFR because it was easily configurable with the CX on ASA5515-X module.
Anyone know if I can put it on Firesight and SFR sensor ASA5515-X?
Thanks in advance.
Kind regards
Remi
Remi,
Unfortunately the limit speed of bandwidth / traffic shaping is not currently available for devices of firepower.
You can speak to your sales representative to discuss the future roadmap of the produ
CT in more detail.
The function is in the road map and will come with the future software release 6.X.
Best regards
Veronika
-
Based on the sources, the routing of calls on VCS - E
Hello
We have now several customers, who can dial only an IP address. Is there a way to do a based ip source routing?
Example:
source ip address: 1.1.1.1. dest ip: 10.10.10.10 (VCS-E)--> translated destination: [email protected] / * /
source ip address: 2.2.2.2. dest ip: 10.10.10.10(VCS-E)--> translated destination: [email protected] / * /
source ip address: 3.3.3.3. dest ip: 10.10.10.10(VCS-E)--> translated destination: [email protected] / * /
Translated destinations are known by the VCS-E.
Best regards
Daniel
Maybe you're using the CPL, take a look at the start on pg 345 VCS Admin Guide .
What endpoints they use and how they are deployed that restrict them to compose only via IP address?
-
MRM - 'monitor source address is not configured "?
Greetings,
I try to use MRM, but the "manager" doesn't seem to know its source, despite the research address as it does.
I tried several source interfaces.
Mrm - ip TEST Manager
Serial0/0.1 225.0.0.1 Workgroup Manager
senders 1
2 receptors
-----------------------------------------
R3 #sh ip mrm manager TEST
Manager:test/1.0.0.1 is not running
Beacon interval/holdtime / ttl:60/86400/32
Group: 225.0.0.1, UDP port test-package/status-report: 16384 / 65535
Test mailers:
5.5.5.5
Receivers of tests:
1.1.1.1
-----------------------------------------
R3 #mrm TEST start
Source monitor address is not configured
-----------------------------------------
???!!!! Another interface (loopback)
-----------------------------------------
R3 #sh ip mrm manager TEST
Manager:test/3.3.3.3 is not running
Beacon interval/holdtime / ttl:5/86400/32
Group: 239.0.0.1, UDP port test-package/status-report: 50000 / 50001
Test mailers:
5.5.5.5
Receivers of tests:
1.1.1.1
R3 #mrm TEST start
Source monitor address is not configured
-----------------------------------------
I tried this on various 3640 s running enterprise 12.3 and a 12.2 (32) running of 2500. All have the same result.
You missed this command, I think.
"R1(config-mrm-manager) # 2 sender-list of recipients 1.
While the Cisco IOS CLI parser accepts the command entered without the pair of keywords-argument access-list-list of senders, this pair of keyword-argument is not optional. For a test MRM work, you must specify the sources that the Test receiver should monitor using the sender-list of keyword argument and access list.
This should solve the problem.
HTH-Cheers,
Swaroop
========================================
]
R1 #sh ip mrm in
R1 #sh ip interface of mrm
State of the address of the interface Mode
FastEthernet0/0 10.1.1.1 - receiver to Test upward
R1 #mrm TEST1?
start the start IP MRM test
stop the test to stop IP MRM
R1 #mrm TEST1 beginning
R1 #mrm TEST1 beginning
R1 #.
R1 #.
R1 #sh
00:06:23: test of IP MRM 'TEST1' begins...
% Of type 'show?' for a list of subcommands
R1 #.
R1 #.
R1 #.
R1 #sh ip Manager mrm
Manager:Test1/10.1.2.1 is running, expiration: 1d00h
Beacon interval/holdtime / ttl:60/86400/32
Group: 239.1.1.1, UDP port test-package/status-report: 16384 / 65535
Test mailers:
10.1.1.2 n - Ack
Receivers of tests:
10.1.2.2 n - Ack
R1 #sh ip Manager mrm
Manager:Test1/10.1.2.1 is running, expiration: 1d00h
Beacon interval/holdtime / ttl:60/86400/32
Group: 239.1.1.1, UDP port test-package/status-report: 16384 / 65535
Test mailers:
10.1.1.2 n - Ack
Receivers of tests:
10.1.2.2 n - Ack
R1 #.
!
Manager of mrm IP TEST1
Manager group 239.1.1.1 FastEthernet1/0
senders 1
receivers 2-list 1
!
access-list 1 permit 10.1.1.2
access-list 2 allow 10.1.2.2
!
!
R1 #sh cdp nei
Ability code: R - router, T - bridge Trans, B - road Source bridge
S - switch, H - host, I - IGMP, r - Repeater
Device ID Local Intrfce Holdtme Port platform capability ID
R2 Fas 0/0 135 R 3620 Fas 0/0
R3 Fas 1/0 172 R 3620 Fas 0/0
R1 #.
R1 #.
R1 #sh ip int brie
Interface IP-Address OK? Method status Prot
Commissioner of official languages
10.1.1.1 FastEthernet0/0 YES manual up up
10.1.2.1 FastEthernet1/0 YES manual up up
Loopback0 1.1.1.1 YES manual up up
R1 #.
----------------------------
-
I use a device of 4710 Ace deployed in armed mode, use Source TAR to balancing HTTP request to a couple of Proxy servers.
Everything works well, but the thing is that I do not see the client IP addresses on the Proxy logs, so I can't keep track of them.
Interfaces and the Nat configs are:
interface vlan 200
Description of server-side-VLAN
Bridge-Group 5
NAT-pool 5 10.1.1.5 10.1.1.5 netmask 255.255.255.0 pat
entered service VIP policy
interface vlan 300
Client-Side-VLAN description
Bridge-Group 5
interface bvi 5
IP 10.1.1.3 255.255.248.0
Interface Client-Server virtual description
IP route 0.0.0.0 0.0.0.0 10.1.1.1
and the policy looks like this
Policy-map multi-game VIP
class port 80
Balancing vip continues
policy of balancing port 80
NAT Dynamics 5 vlan 200
The resource assignment:
Sticky ip-netmask 255.255.255.255 address two CLASSES of RESOURCES
Timeout 5
Serverfarm Service80
Any suggestions will be appreciated,
Thank you
Hello
You can use X-forwarded-for to insert the IP address of the client in the header Http. take a look at the link below:
http://www.Cisco.com/en/us/products/HW/modules/ps2706/products_configura...
Let me know if you have any questions.
Kind regards
KanwalSent by Cisco Support technique iPhone App
Maybe you are looking for
-
I have my browser set to restore the previous session, when I open Firefox and new tabs to open the vacuum. With these settings, I used to be able to open new windows and carry the load of my home page, while keeping intact previously mentioned behav
-
I can't disconnect from iCloud on Macbook because he has the wrong email Apple ID
I recently changed the associated email to my Apple ID, (not a new ID), and on my laptop under users it still shows my old email. I changed the email on my contact card and it did nothing. I have change the password to my Apple ID, but when I try to
-
Why FireFox continue to change the window by clicking on another program?
I've upgraded to FF 8 recently. When I start it and go to, let's say, Gmail (in the window), and then open a different browser window (window B) to go, say, Facebook, if I click on another program like Live Messenger or even a reduced window of anoth
-
Re: Satellite P200D - 11L and a station
HelloI have a question about Satellite P200D - 11L. Is there a docking station for this model (except Dynadock i.e.)? For example is forward compatible with this laptop Port Replicator?Thanks in advance.
-
FGV in packed lib cause leakage
Since an update of a project of LV2009 in LV2011 it became a problem. This is the message we have received: With the conversion we also converted the LLB used to a LVLIBP. The problem led us to this LVLIBP and a dynamic call to a FGV in a VI belonged