Redirect USB in Windows server 2012

Similar Questions

• Then Windows Server 2012 or any version of Windows Server can detect whether a USB WindowsToGo is used?

  Hi, I am a newly assigned system admin and don't make broad not yet know about it as I met recently. I managed a small business is composed of 15 to 20 computers. The previous system already admin configured everything ADC Policy GPO. An employee was able to install a software game on a computer she used when I checked, she was using the WindowsToGo USB. I am a little confused because it never trigger alarms on the ADC server, assuming a different computer on the WindowsToGo name. Is there a way to monitor this or any third party software that could determine if any WindowsToGo USB or a USB bootable is used?

  Sorry, bad forums.

  TechNet forums - Windows Server 2012 General - Microsoft

  Post here.

• problemi su periferica vm windows server 2012 usb

  Ho una scheda usb TNT is known una vm windows server 2012, to faccio partire it server esxi 5.1 e launch the vm tutto ok;

  just magnobeam o riavvio vm no esxi the periferica tutto viene persa. Sono costretto an extreme tutto centred it server esxi;

  collegandomi in ssh sul Server e lanciando he lsusb the periferica comando non vedo più... la cosa strana e che ho anche a obvious da usb a series e viene rilevato sempre e funziona place vm anche sulla is riavvio o the magnobeam;

  Come posso risolvere?

  He e mouse series no are hurt in passthrough went VM ospitata, e questa the difference!

  relativamente alla periferica DTT, e in general al supporto USB su vsphere, anche lo who sewn by altri che aprono wireless o che leggeranno e altri in futuro, sempre lo stesso discorso e boom: he supporto USB di ESXi e molto traffico e he Liveleak.com varia da periferica a periferica. Very nearly killed her periferica non supportata, ogni Liveleak.com ottimale non e quindi e da mettere in conto, e UNICA e fare dei tests per verificare he Liveleak.com all'atto pratico. So that is brutal, my both ' e...

  Gli alone due documenti official cui Può fare sono questi re if:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1022290

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalID=1021345

• Supported Windows Server 2012 r2-dual monitor

  Hi all

  I'm trying to become more proficient with Windows Server OS.  I installed Windows Server 2012 r2 on an older laptop (HP ProBook 6565-b) of the mine because the base OS (not remote communication in).  I'm wanting to add a second monitor to this machine, for either extending display, or simply duplicate, if I close the lid-if I can use my screen a lot nicer, bigger than what is connected to the laptop.

  I read through all the posts on double monitor support for Windows server, but have had no luck so far with suggestions that I have ad (updated & reinstall the drivers, etc..).  I also had a cheap USB to VGA external video card (Startech.com) I tried to use... no luck.  Before I installed Windows Server 2012, I got this working environment in Windows 7 and 10 on this laptop, so I think the graphics card is supported?  I wonder if this is even possible or if I'm wasting my time?

  Any idea on how I can make this work would be greatly appreciated.

  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• RelayState parameter is a full support with ADFS in Windows Server 2012?

  We implement Single Sign-On with ADFS. (Service Provider - salesforce.com, identity provider - ADFS). But when authenticate us with ADFS, he is will authenticate successfully, but it will be redirected to the site complete salesforce instead of the mobile site. Salesforce document mentioned that we must manage the on ADFS RelayState parameter. And I saw that some article mentioned the 'RelayState' parameter is not fully supported for Windows Server 2012. Please let us know Windows Server 2012 is fully supports for the parameter "RelayState" and if it is how to handle on ADFS. Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Error activation product key has been used already on Windows Server 2012.

  Original title: Activation error

  Two days ago, I installed windows server 2012 on my PC... It has been corrupted because of virus on my USB key that I reinstalled it twice but both times, it has been corrupted... when I installed it third time Activation has failed, it is said that this product code was used on another pc... no activation now please help me... and one thing I've never done any material change

  Try the phone activation, you may have to do during the week:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• How can I get Windows Server 2012 Essentials recognize my HARD drive when you turn an external HARD drive in a drive HARD internal storage?

  I recently had a pool of storage space using 3 external drives USB 3.0 in Windows Server 2012 Essentials.  I decided to take the readers out of the enclosure and connected directly to the internal SATA connectors on my motherboard.  When the server was launched upward, these 3 discs now display as disconnected in storage.

  When I do the command 'get-disc' physical in PowerShell, the drives appear as "drives physical 1,2 & 5" and are 2.72 to each. "."  But it also lists disks Seagate Expansion as well, with a status of "communication lost".  These are the same three disks that are now internal.

  Nothing has been deleted or erased, so all the data is still on each individual unit and assume that if I managed to put back them in the external enclosure, would immediately online.  I thought that everything simply moving them to a new HARD disk controller (internal SATA USB) would not cause the pool to drop the readers, they are always connected to the same server.

  Is there a way to get storage space to see and read the 3 internal drives to bring my pool/area back online without losing any data?

  Server experts are found in the forums below.  The forum you are now is for questions to the consumer of Windows, not Windows Server issues:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Why not work my product key for Windows Server 2012 RDS CALs?

  I am a member of the partner network and downloaded Windows Server 2012 RDS CALs from my site, I should have 10 licenses (I have not used any to date), but when the installation asks me the key, is not able to verify.

  I'm trying to install on a server of micro Prolient boot from usb because the server is new and has no existing operating system.

  I suggest that repost you this query in the ITPro forums more appropriate.

  But I'm a bit confused - you try to activate the server, or clients?

  they have separate keys

  assuming it's customers...

  http://social.technet.Microsoft.com/forums/en-us/w8itproinstall/threads

• New TS140 - cannot get Windows Server 2012 demo of R2 to install

  Hello

  I recently bought the TS140 and attempted to install the demo of Windows Server 2012 available from Microsoft.  I completed the following steps:

  (1) engraved an image ISO for the demo on a DVD.

  (2) load on startup the thinkserver DVD format the disk, download updates and prepare the installation.

  (3) at the end, I put the DVD in the drive.

  Despite the DVD being burned successfully, the guard TS140 eject the DVD and asking for the disc.  Issues related to the:

  -Someone installed via the demo and can give advice on the process?

  -Is the DVD of the right way to go or should I go with another method as a USB?

  Sorry, I'm use to the insertion of a DVD and occurring start installation.  Try to install after the initial drive of Lenovo is causing me some confusion.

  Thanks for your help!

  First of all, thanks to all for their persistence I managed to do the work.

  Basically, if you download the ISO of the evaluation version, YOU cannot USE the native Windows ISO burner.  When I copied on a drive and had Windows burn, it just don't understand the disc.  However, when I used the Windows store software specially set up the server:

  http://wudt.codeplex.com/

  He worked very simply.  I am extreme newbie, so it was difficult.  If you have purchased a TS140 and try Windows Server, follow these steps:

  (1) copy eval on the Microsoft site.  They have like 10 files to download, but you only need one ISO.  I don't know how the other files.

  (2) use the ISO burner of the Microsoft store - its registered for use with Windows 7 but worked like a charm.

  (3) use the boot (ThinkServer Easystart) disc that comes with your server, or as a recommended download the most recent copy.

  4) go through the steps.

  (5) when you are prompted, insert the new drive of Windows Server R2 2012.

  (6) it must go through the installation.

  Once again, thank you for not giving up, and I hope that my instructions about help an absolute beginner.  Probably simple for experts from the server, but I've never used Windows Server (other than Windows Home Server which was awesome, but abandoned!)

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• Implement the deployment of Machine virtual Windows Server 2012 with a data Bit Locker encryption?

  Hi all

  Is it possible to implement the feature data Bit Locker encryption on my Virtual Machine to Windows Server 2012 Std on the Platform VMware ESXi 5.1 vSphere update 1 ?

  The hypervisor is currently running on servers HP Blade BL 460 c G8 . Read well the hardware specification: http://h18001.www1.hp.com/products/quickspecs/14208_na/14208_na.pdf I see that he has taken a TPM installed on the blade, but I don't know how to make sure that it is activated or used by the Virtual Machine?

  Any kind of help would be greatly appreciated.

  Thanks in advance

  I had a few goes at it and it's not like you can virtualize a TPM. It would make sense if it was the case - the secure TPM was not designed to manage multiple instances of the OS.

  I ended up making USB passthrough on a USB stick and have the Bitlocker key stored on this stick as a demo. Certainly not a transaction supported, but it showed that the storage of key seems to be the only issue.

• ProBook 6560 b: wireless network drivers - R2 Windows Server 2012

  Would like to know if one got successfully installed Windows server 2012 R2 drivers. I try to install the drivers wireless for two days now and could not get their work. Any help would be really appreciated.

  Thank you

  Hello:

  I don't work for or represent HP.

  All I can advise is that HP offers no support or drivers for all windows server operating systems for any mobile business or consumer they ever made.

  With this track record, I doubt very much they will be.

  In addition, it would be Intel to release Windows Server drivers for their wireless cards, not HP.

  I've never seen a card driver wireless for windows server on the Intel Web site.

  Normally the equivalent standard windows drivers work on Windows server most of the time.

  For example: If you had installed Windows Server 2008 R2 on your laptop, wireless Intel W7 driver probably would work.

  But since there is no equivalent W10 driver for the wireless card model that your laptop is, I have a feeling that is the reason why the wireless card does not work.

  You may laugh with some of the advanced settings for the card under the Advanced tab in Device Manager to see if you can get the card to work.

  Enable WMM for example.

• Satellite C660 - 1 DG-drivers of Windows Server 2012

  I started Windows Server 2012 (for development purposes).

  Now... where can I find the drivers?

  * display driver *-lets start with the display driver (for the Intel Graphics Media Accelerator HD) when I look for the display driver in the support forum I only find the driver of Intel for Windows 7, but there is none yet for Windows 8? -Installed Windows 7 driver - works ok :)
  * sound driver * -.

  What drivers Miss do you?

  Fact is that Toshiba offers all drivers for supported operating systems.

• Satellite P850 - 31 M - invalid key, the installation of Windows Server 2012

  Hello

  I don't know about or write about me, that it moves if necessary.
  So here's my problem.

  I just bought a laptop with the windows installation 8, but I want to install Windows Server 2012.
  I boot on my dvd, everything's fine, and then I click on install and then he told me that the key was invalid.
  But I do not enter a key.

  When I reinstall windows 8 I give no key and it did not in the property and after he told me that windows is activated.

  I don't understand the key or it will scan?
  I have how little he turns to me key?

  Thanks in advance

  Sorry, but I m confused.

  If you have purchased the license Windows Server 2012, then you have also a serial key.
  You must use this key for activation.

  Victory 8 regarding:
  I guess Win 8 was preinstalled.
  In this case, you will need to create a recovery disk before you install another system?
  You don't have any disk Win 8 because there was a possibility to create a recovery disk and the recovery disk contains a 8 win which is enabled.

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.