RelayState parameter is a full support with ADFS in Windows Server 2012?

Similar Questions

• Unable to print a PDF with adobe reader 10.1.12 Windows Server 2012 R2 RDS session

  Situation: My users are connected with RDP on Windows Server 2012 R2 Datacenter Remote Desktop Service and when they connect, their share printers are installed.

  When users open a pdf file, they cannot print it. When trying to print a file, nothing happens... Any file sent to the printer...

  I saw a difference between the shortcut icon of the adobe reader for users who have this problem and other software.

  No problem:

  

  Problem:

  

  If anyone can help me

  Thank you!

  Hi Ajlan,

  To solve my problem, I uninstalled adobe reader X with "Adobe Reader and Adobe Acrobat Cleaner Tool", rebooted the server, installed Adobe Reader XI and restarted again.

  For some users, this fixes the problem, but with a few others, I had to define default Adobe Reader again.

  I tried without using 'Adobe Reader and Adobe Acrobat cleaning tool' front and the adobe reader X software was not really uninstall.

  Thank you

  Kind regards

  Sullyly

• ACS 4.1 supported with Windows Server 2012 domain controller

  I put to level my domain controller / Active Directory from Windows Server 2003 to Windows Server 2012.

  In my environment, I use Cisco ACS 4.1 that is built into Windows Server 2003 Active Directory.

  ACS4.1 will be working perfectly with my new domain controller (Windows server 2012) or I need to improve my ACS too?

  Kind regards

  Junaid

  ACS 4.1 does not support the 2012 server that you should update

• Suspension of consistent application on Windows Server 2012 invited with U2 ESXi 5.0

  We lack ESXi 5.0 U2 (build 1254542) and we are going to have problems making consistent application paused on our virtual machines that are running Windows Server 2012.

  We use Acronis vmProtect, and he throws warnings on our VMS in 2012 on the SQL Writer is not not available.  I contacted the Acronis support and they said that it is a problem with the suspension of consistent application.

  When I take a snapshot of a VM 2012 (verification of the ability to perform a capture instant consistent application) capture instant full fine without errors or warnings.  But when I look at the vss_manifests zip file that is created, there is only a single file (backup.xml) with a single line.

  When I take a snapshot of the suspended application on our virtual machines that are running server 2008, the vss_manifests zip file also contains files for each of the VSS writers.

  I checked the disc. EnableUUID is set to true (the virtual machines created on ESXi 5.0 U2 with Virtual Machine Version 8).  I have even manually it specified.

  I checked that the virtual machines use only SCSI disks (there is only 1 disc) and is not a GPT disk or dynamic within the guest OS.  It is a thin disc put into service, if that matters.

  I checked VMWare Tools is installed on the client, and I tried to reinstall it.

  Is there something else I should look for consistent suspension with applications working on Windows Server 2012?

  What do I need to run ESXi 5.1 for this to work?  (Or could I just install the latest version of VMWare Tools manually?)

  If I have to run ESXi 5.1, 5.0 to 5.1 ESXi licenses are worth?  (We have the 5 Essentials license Server vCenter).

  If I have to run ESXi 5.1, must I also improve our vCenter Server installation of 5 to 5.1?

  Thank you

  We've finally updated to 5.5 and everything seems to work fine now.

• Supported Windows Server 2012 r2-dual monitor

  Hi all

  I'm trying to become more proficient with Windows Server OS.  I installed Windows Server 2012 r2 on an older laptop (HP ProBook 6565-b) of the mine because the base OS (not remote communication in).  I'm wanting to add a second monitor to this machine, for either extending display, or simply duplicate, if I close the lid-if I can use my screen a lot nicer, bigger than what is connected to the laptop.

  I read through all the posts on double monitor support for Windows server, but have had no luck so far with suggestions that I have ad (updated & reinstall the drivers, etc..).  I also had a cheap USB to VGA external video card (Startech.com) I tried to use... no luck.  Before I installed Windows Server 2012, I got this working environment in Windows 7 and 10 on this laptop, so I think the graphics card is supported?  I wonder if this is even possible or if I'm wasting my time?

  Any idea on how I can make this work would be greatly appreciated.

  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• support for Windows Server 2012

  Is it supported?  Can someone tell me the documents concerning management of Windows Server 2012?  Thank you

  At this point Windows 2012 was not included on the list of the supported operating systems. According to what storage device, you work with I saw it works fine, it is just not has been added to the support matrix. What devices work with and I can do some tests and see if I ran into all the questions about it. I advise you to just keep an eye on the support matrix for each device on the site www.support.dell.com because it will be added here once all tests completed. Only, I have not heard of an ETA on when that will occur.

• Remote assistance with vWorkspace 8.0 MR1 on a Windows Server 2012 R2 with Windows 7 Enterprise VDI (RDP8)

  We have a new VDI environment with the new Version of v 8.0 MR1 Workspace and real fixes. The connection Broker and the Hyper-V hosts running on Windows Server 2012 R2 Standard with real fixes. The VDI Clients are configured with Windows 7 Enterprise and RDP8. Unfortunately, we are not able to use by the broker for connections Remote Assistance?  We received the Error Message:

  The following error occurred during the occultation session 2 on the server...

  This function is not supported on this system. (120)

  I found the link: http://documents.software.dell.com/doc78042 or

  http://documents.software.Dell.com/DOC145926

  But this article has no recommendation for Windows Server R2 Standard 2012

  Any help, I would be grateful.

  THX in advance

  Thomas

  This question is not met at the time of the request

  I created a Blog post to allow other servers to 2012r2 2012r2 of remote assistance.

  However, it is not possible to use 2012r2 to help a win7 server remotely. It is simply not supported by MS and there is nothing we can do.

  If you can create a server 2008r2 to run the Management Console, you will be able to assist distance Win7 VDIs from here.

• Windows Server 2012 with EFI fails to start after reset of HA

  The purpose of this thread:
  1. a solution, if anyone else has this problem.
  2. If someone has a better knowledge of why this happens or how avoid feel free to explain it please.

  The scenario:

  I was a new analysis a HBA via the Web Client (something I've done many times before in the non-Web client without any problem...) and loses connectivity to the ESXi host. No response from the ESXi at all and I've noticed a GROUP... That's fine for now...

  The biggest problem is that the VM on the failed host installs via HA to my other ESXi in the cluster, each of them has started normally except my 2012 server s. Just the Automatic Startup Repair Wizard has started, and I couldn't do much from there... I tried a few things auto repair, but they could not fill...

  So, I entered the command line tools and ran from diskpart. Discs not presented at all. That's where he hit that I use PVSCSI drivers for my 2012 s server so I was trying to understand how I could inject the command line, but I tried something else first...
  I started the virtual machine on the ISO 2012 server. Tried the option repair, no OS not found to fix, so I chose a new installation and loaded drivers PVSCSI pvscsi-floppy, interrupted the installation and tried the repair option again. He said something like "Continue to start Windows Server 2012" and viola! The VM rebooted successfully and started successfully in the operating system.

  All 3 2012 Server virtual machines on failure that esxi is affected. No Server 2008 or linux where affected machines but they do not use the pilot PVSCSI.

  
  Anyone has a solution alter or maybe an explanation why this happened? This will happen if HA into action on my server 2012 s?

  Is it possible to test or confirm without killing an ESXi host?

  I am running vSphere 5.5 and I don't think that I had this problem with 5.0 or 5.1, but I'm not 100% sure that cause I don't remember no matter which GROUP or another that are running older versions of the failure.

  Hardware version is 9, EFI boot.

  Thank you!

  Finally, I solved this... Looks like a mistake to the EFI initialization after reset of a HA. I know EFI is not supported by FT but I'm only using HA I can't find anywhere that it says that it should not work.

  This is how I fixed the corrupt WS2012 boots:

  1 boot WS2012 ISO, select new installation, load drivers PVSCSI, interrupt installation and choose repair. (Only needed if PVSCI-pilot helps you bootdisk)
  2. choose Help and then command Promt
  3. Run diskpart
  flight type list
  Locate the number of the partition-small FAT32 EFI, in my case nr 3
  Salt type flight 3

  type assign

  flight type list

  Choose the letter assigned, in my case E:
  Type exit

  4 cd /d e:\efi\microsoft\boot

  5 ren BCD BCD.bak

  6 bcdboot c:\windows/l en-us/s E: /f ALL

  7 bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  Don't know if all these are necessary... However, it works. Note that the scanos and rebuildbcd show 0 found BONES.

  8 exit the command prompt and click on "Continue starting the server 2012" after that recharge should work properly again.

• FT-record/replay feature is not supported by this virtual machine Windows Server 2012

  Recently I came across a bug when I created a virtual machine with the latest versions of 5.1.0 - ESXi 838463, Client ver 5.1.0 - 860230, vCenter ver 5.1.0 - 880146.  If you create a virtual machine on a Server Windows 2012 farm for some reason any recording/playback is disabled and you cannot implement fault tolerance mode.  I found a good solution.  You delete the virtual machine to inventory, and then re-create the virtual machine as a Windows 2008 R2 server and use the virtual machine that you deleted from the original disc of the inventory rather than create a new one.  Then turn on FT.  Then, go into the settings and change the operating system to Windows Server 2012.   Fixed a problem.  If all goes well they will fix this soon.

  Jimmy S.

  Default adapter for windows 2012 is E1000E, which is not supported for RecordReplay FT.  If this is the case can you please try with another network card and see if it helps.

  If this is not the case, can you please upload vm-support bundle or file a support ticket.

  Thank you

  Pradeep

• Is Adobe Media Server Compatible with Windows Server 2012 5 Professional?

  Could someone from Adobe please check the following link is up-to-date and AMS 5 Pro does not support Windows Server 2012?

  http://www.Adobe.com/products/Adobe-Media-Server-Professional/tech-specs.html

  Thank you

  I'm sure they have one, but I have no idea what it is. It will probably be with a relapse of the AMS service pack in the future. Adobe has not officially supported Windows Server 2012 in one of the applications of the company I have worked with, so don't feel that AMS is excluded.

• Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Original title: licenses

  Hello

  I installed Windows server 2012 standard R2 and for Windows server 2012 ROK Standard license 2CPU/VM.

  Windows has not activated this license.

  Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Thanks in advance!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows Server 2012 R2 Standard Radius Client support

  Hi team,

  In 2012 R2, the NPS Service server used for authentication. It uses the Radius Clients as authenticator. There is no online documents about the number of clients supported by the Windows Server 2012 R2 Standard Edition and Datacenter. Might well want to mention the number of clients supported by the version

  Thank you

  Sudhakar

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Upgrade Windows Server 2012 Std to 2012 Std R2 with the same license

  I have an activation key for windows server 2012 Std, can I upgrade windows server 2012-2012 Std R2 with this key? Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Remote access Windows Server 2012 through internet with desktop connection

  Summer messing about with it for days and don't get no love.

  Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

  Tried all these steps found in this promising and useful article:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

  2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

  3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

  4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

  5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

  6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

  But the result of the message is always the typical:

  (1) remote access to the server is not enabled.

  > But this is not true, that I am capable of the DRC at home on the server machine.

  (2) computer remote is not off.

  > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

  (3) the remote computer is not available on the network.

  > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

  So... what to do, what to do...

  The wifi booster is a problem?

  Connects to the Data Center edition a problem?

  What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

  Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

  Thanks for any input.

  / Markus

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.