(Redirected) 10 Windows installation problems.

Similar Questions

• Windows installation problems

  I'm trying to update my itunes software, but I get an error message indicating that windows install is not available or is not installed correctly. I tried all suggestions on the helpcentre running commands and the audit services but nothing works. I've updated to a set of Windows 3 I think but still nothing can be installed. Help, please? IM using Xp 32 bit?

  Hello

  Thanks for posting the request in the Microsoft community forums!
  It seems that you receive the error Windows install is not available or is not installed correctly during the iTunes update.

  Method 1:
  You can perform a clean boot and check if you are able to update the iTunes.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article

  Method 2:
  You can try the suggestions section of the knowledge base and check if it helps:

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003
  http://support.Microsoft.com/kb/315346#Method2

  Refer to the steps from the link:
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651#reso1

  If you need help with this issue or other problems related to Windows Operating System, keep us informed. We will be happy to help you.

• TurboCAD Pro 14.2 fails to install because Windows Installer problem.

  Problem installing Windows

  I TurboCAD Pro 14.2 and I was forced to get a new key of Activation of IMSI, as I have lost the original.  After with the new key of Activation Windows Installer contains TurboCAD for about half an hour before I give myself the opportunity to cancel the installation program or continue with it.  Only when I opt to cancel TurboCAD works.  I tried to run Microsoft Fix - it, which tells me that there is nothing wrong with what on the system, and I tried to remove and reinstall the program does not.  Also, I spent about two weeks of work, by electronic mail, with the team of the IMSI and beyond them telling me to use a utility windows install cleanup which no longer exists, nothing materialized.  I am running Windows XP SP 3; can someone help me with this? All constructive comments will be appreciated: thank you.

  For all those who have offered suggestions that I found the answer.  It seems that the whole problem is the consequence of a file named SetPdb14Pro.  I found the file among those on my Add/Remove panel.  Once I removed it the package worked without a hitch and it did not return because I now use my original password installation discs and activation code.  Here is a month lost because I don't watch carefully before I made a leap.

  Doeboy_9

• Applications and updates Windows installation problems

  Original title: using windows vista Installer problems and having

  nothing will be installed on a disk and installs very few downloads, windows update tried to install the same 14 updates and they do not know how this can be corrected

  Hi DaroldMILLER,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What applications/programs you install?

  ·         You install updates?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Problem installing programs and applications:

  Method 1: Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  Troubleshoot installing or uninstalling programs

   

  Problem installing Windows updates:

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Windows installation problems. Windows Setup could not be accesed during installation of Itunes.

  In my view, that I tried everything when it come to the windows installer.  I tried to re - install the application... does not work. (not enough storage, it is said).  I entered service and when I double click on the windows installer says "Configuration Manager: the specified device handel instance does not match a current device.»   I changed the settings of the automatic manual and vice versa many times. .. .doesnt fix problem.   Tried to cancel the registration of files mscexec then re-register... does not work them.   What now?  I became extremely frustrated by this ongoing problem!

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;290301

  http://support.Microsoft.com/kb/555175

  --
  ..
  --
  "reauks" wrote in message news: f1a75d27-2247-4f50-8d0e-5d3bed73e0af...
  > In my opinion, that I tried everything when it come to the windows installer. I have
  > tried to re - install the application... does not work. (not enough storage
  en I double click
  > on windows installer it says "configuration manager: the device specified.
  > instance handel does not match a current device. I changed
  > manual to automatic settings and back again many times.
  >.. .doesnt fix problem. Tried to cancel the recording then mscexec files
  > re-register them... does not work. What now? I became extremely
  > frustrated by this ongoing problem!

• Rhino 5.0 - Windows Installer problem

  I'm an industrial designer, and I use rhino 5.0 for modeling.

  But when I want to install for Rhino 5.0 (64-bit) Evaluation, my Windows Home Premium (64 bit) always give an error like this:

  "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

  I never find a solution for this error. This program is very important to me.

  Thank you for your interest.

  Serhat Ozpercin

  Industrial designer

  Is there a difference between the file system, with what you have now formatted and file system used previously.  Similar question about editions 32-bit or 64-bit Windows?

  The file extension that you click right on, should be a .exe to see the run as Administrator option, what was perhaps a .msi extension that would explain the lack of options?

  See if any of these options will allow you to run with higher privileges .msi file?

  Context menu "Run as administrator" for Vista MSI
  http://www.Symantec.com/connect/downloads/MSI-run-administrator-context-menu-Vista

  Try this from an elevated command msiexec /a prompt (and enter in your full path for the .msi file)

  Can you extract the files and find a right click on Setup.exe and "Run As an Administrator"?

  How to: extract files from an .msi file by using the Windows command line
  http://thebackroomtech.WordPress.com/2007/08/23/HOWTO-extract-files-from-a-MSI-file-using-the-Windows-command-line/

  Have you tried to test with another user?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Have you tried to eliminate third-party programs such as anti antivirus realtime as possible a cause?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Teas are the result of research to support for similar problems.
  http://v5.Rhino3D.com/Forum/Topic/Search?CategoryID=6377196%3ACategory%3A150&q=install#.

  Forum.
  http://v5.Rhino3D.com/Forum/categories/support-1/listForCategory#.

• (Redirected) 10 Windows Installer failed: no video display, screen, impossible to boot-to-use computer only black

  Hi all I recently upgraded from Dell s 660 Windows 8.1 for Windows 10 PC. That part went well, no problem.

  Then, I decided that I wanted to clean things up I did a Reset, delete all settings of Windows. This ultimately failed and I got an error message that the bootstrapper has been damaged. Computer would not boot successfully.

  OK, so I decided to do a clean install to solve this problem. See the Microsoft Web site and download a tool to create bootable USB stick with Windows 10 installation files

  Then I inserted the USB in the broken computer, restarted, and the installation begins without any problem. I got all the way to the screen where I choose which partition to install the OS on. I chose the right partition and clicked ok, then leaves the room for a few minutes. I came back and met with a black screen, but the computer still worked. I waited about 30 minutes, but there was no change, so I decided to restart.

  Given zero has not set the problem. The computer always starts and I see the hard drive activity light flashes from time to time, but I don't see anything on the screen. No DELL logo at the start as there were no past, no loading spinner, nothing... Pressing F8 does not seem to help, I can't get into the BIOS or anything. I tried with and without installation of Windows 10 bootable USB inserted, does not matter anyway the result is same - just a black screen.

  I guess it could be a hardware problem, but it feels like a very large chance that my error started to arrive for the 10 Windows Installer, so in my gut, I feel like this is probably a software problem, but I don't know. I've never had problems like that until the 10th of Windows Installer.

  I have tried both HDMI and VGA ports, nor work. It has integrated video, so these ports are directly on the motherboard. Any ideas on how to fix?

  Best of this post in the forum Windows 10 here:

  http://en.community.Dell.com/support-forums/software-OS/f/4997

  Bev.

• Creation of Photoshop does not install... It looks like a window installation problem

  When I try to install first 10 elements it goes straight to a white screen of Windows Installer and will not be installed.  Today, I installed Photoshop Elements on the same disk.   I am running XP SP3.  Here's what said the window and it stops just to install it.

  Windows® Installer. V 3.01.4001.5512

  msiexec/option < required parameter > [optional parameter]

  Installation options

  < / packages | / i > < Product.msi >

  Installs or configures a product

  /a < Product.msi >

  Administrative installation - installs a product on the network

  /j < u | m > < Product.msi > [/ t < Transform list >] [/ g < language ID >]

  Publishes a product - m for all users, allows the current user

  < / uninstall | / x > < Product.msi | ProductCode >

  Uninstalls the product

  Display options

  / quiet

  Quiet mode, no user interaction

  / passive

  Automatic mode - only progress bar

  / q [n | b | r | f]

  Sets the user interface level

  n no user interface

  b Basic UI

  r reduced UI

  f-full UI (default)

  / Help

  Help information

  Restart options

  /norestart

  Do not restart after the installation is complete

  /promptrestart

  Prompts the user to restart if necessary

  /forcerestart

  Always restarts the computer after installation

  Logging options

  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *] < LogFile >

  i status messages

  w warnings recoverable

  e-all error messages

  a startup of actions

  r registers of the specific action of the

  u user requests

  c initial UI parameters

  m out-of-memory or fatal exit information

  o disk out-of-space messages

  p - Terminal properties

  v performance

  x extra debugging information

  + - Add to the existing log file

  ! -Flush each line in the log

  * - Log all information, except the x and v options

  / log < LogFile >

  Equivalent of / l * < LogFile >

  Update options

  / Update < Update1.msp > [; Update2.msp]

  Apply updates

  / Uninstall < PatchCodeGuid > [; Update2.msp] / package < Product.msi | ProductCode >

  Remove the updates of a product

  Repair options

  /f [p | e | c | m | s | o | d | a | u: v] < Product.msi | ProductCode >

  Repairs a product

  p only if the file is missing

  o If the file is missing or an earlier version is installed (by default)

  e If the file is missing or an equal or higher version is installed

  d if the file is missing or a different version is installed

  c If the file is missing or checksum does not match the calculated value

  has all the files to reinstall the forces

  u all (default) user-specific registry entries

  m all requirements (by default) computer-specific registry entries

  s all (default) shortcuts

  v-runs from source and recaches local package

  Setting public properties

  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the

  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.

  Portions of this software are based in part on the work of the Independent JPEG Group.

  Mon-step-to-repair-Windows-Installer/136da4c2-0261-e011-8dfc-68b599b31bf5 http://Answers.Microsoft.com/en-US/Windows/Forum/Windows_7-windows_programs/is-there-a-com

• Windows Installer problem when you try to install iTunes

  I had to uninstall itunes, I tried to reinstall and I get a message saying "there is a problem with this installation package.  A necessary program to complete the installation could not be executed.  Help

  Hello

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• after upgrade to windows installation problems

  I have a Compaq cq60. I had vista windows until recently. Now, I've upgraded to windows 7 ultimate. I would like to know if my phone is compatible with the current version of windows. Another problem which started occurring after that I upgraded is im not being not able to video chat on facebook. video chat icon is simply absent. And im also having trouble installing some stuff (Skype and adobe flash player). Installation stops abruptly in the middle. I have tried different browsers google chrome, mozilla and ie. but it's the same deal. Y at - it a plugin, driver I need to install to be able to video chat? Since the video chat used to work properly when I had vista, im guessing this is a problem related to the upgrade of windows 7 ultimate. currently I don't have a service pack installed. Any help would be appreciated.

  My laptop came with vista. But recently I started developing problems. It would have should go down abruptly. So I contacted a dealer near. When my laptop back t has been upgraded to windows 7. When I asked him about this, his response was that windows vista has been exceeded and windows 7 was a better. I'm not investigating the details. In any case, what are the options I have now? should I downgrade from vista? I tried to download Skype again today, but after downloading it said installation could not be copleted.

  Indeed, you must reinstall Windows Vista that came with your computer. See the following thread on how to:

  http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/repair-man-removed-windows-vista-and-installed/f4ec610a-856b-47a6-9ac2-7d5f07763eb0?msgId=343a6389-3a13-46d1-93fa-342f6a9b8ae1

• D110 with 8.1 Windows installation problems

  Greetings,

  Hoping someone may be able to help with a question intall annoying, I'll have. Whenever I try to launch the new driver package for Windows 8.1, I get the following error;

  "The system cannot find the file specified."

  I tried the file running as an administrator... no dice.

  Any suggestions will be greatly appreciated. :-)

  Hello

  You wanted to try the cleaner software that we have developed to try to solve this problem?

  I like personal Message with an email address and I will send it to you.

  Thank you

• 11.1.2.1 Essbase on 32-bit Windows installation problem

  All,
  
  I have all the required files to Oracle Universal Installer downloaded and unpacked. I run the installTool.bat file and when it works, I get 'OK' messages for everything until the end when I get this message:
  
  Result of the verification of assemblies: Ok
  Checking the environment variables...
  Ok
  Check if the file exists and has read permissions: C:\Users\Tom... Ok
  Home user must exist for a successful installation.
  Check the status of her User Account Control (UAC)...
  User account control is enabled. Installation can cause unpredictable results
  and will be stopped.
  EPMINS-01001: one or more checks of preinstallation failed. Correct befo
  Re to continue installation.
  
  Press Enter to exit
  
  
  Not sure how I should proceed. It's on a laptop Windows 7 Professional 32 bit.
  
  Thank you

  First of all windows 7 isn't an operating system that is supported if you install the server components, have a read of the matrix of supported for the platforms supported - http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls
  You must also turn off UAC before installing - http://windows.microsoft.com/en-US/windows-vista/Turn-User-Account-Control-on-or-off

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Hi there [CS5.5 on Windows installation problem]

  Hi, I have Adobe Creative Suite 5.5 software. I am trying to install it on my PC, but he asked a 2nd Master collection cd. When I insert the 2nd cd's doesn't work. Please help?

  [Title edited for clarity... MOD]

  See if the download works kglad links in response #1 here can help https://forums.adobe.com/thread/2081216

  In addition, exactly what version of Windows?

• Acrobat 10 Windows installation problem

  Hello

  I'm trying to install Acrobat 10 on a Windows 2008 system. I installed the version beta, but impossible to install the final version. I get the error "not enough memory is available to process this command", and yet I have the two a lot of disk space and memory. Any suggestions?

  Remove the beta version.

• Problem with Windows Installer (I think)

  Hey I just got a new 'game' PC with all the good things like i7 processor nvidia GTS 250 graphics card. So I guessed I would setup games. Games were installed very well the problems started when I tried to run SteamInstall.msi he looks ready to install for 1 second and then close and nothing happen. Even try to do once again nothing. So I gave up with it.

  Then I installed cod4, codwaw and download for both patches. When I try to install the patches it starts normal and after extractinng saying "" ".msi or msu or something it get stuck on the preparation for installation on both cod4, codwaw games and I think about others too... '".

  So I guess that's my Windows Installer problem... ? Windows Vista Home Premium SP2 (problems on SP1 also)

  Yoris,
  I think that if you had a problem with Windows Installer, then you would have also had a problem installing the games themselves.  If after installing just the game, you are able to start the game, then you will need to determine if you really need the patches you install.  If they fix game issues and do not add any content, then you may not even need of patches.  If it turns out that you do not have the patches and they are self extracting\installing files and then save them to your desktop and then right click and select run as administrator and see if that helps.  You can also check with Activision support , because this can be a problem they know. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.