(Redirected) Alienware 13 with a GTX - 970 m?

Similar Questions

• (Redirected) ALIENWARE AREA 51 AND GTX 1080

  hi, do you know if in the future there will be the opportunity to buy the Alienware Area 51 already with the GTX 1080 ? ( single double or triple )
  

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Alienware area51 with windows7 is not available

  I want to buy the new Alienware area51 with the windows operating system 7. But it seems that this option is not available in Italy or through the Italian web site of dell, while I have seen that it is possible to do it on the American website.  Is there a reason why windows 7 is not an option available in Italy?  Should I hope and wait for this option to be corrected in the future become available as option in Italy as well or should I just try to puchase form pc American web site?  And in the case the later they will be able to deliver the pc in Italy?

  Zikon salvation,

  Please repost this in the Alienware forum for assistance.

  http://en.community.Dell.com/Owners-Club/Alienware/

• Replacement 760ti GTX with GTX 970 in an R2 of Alienware X 51?

  Just did a little research, and from what I can tell the reference GTX 970 and 760ti share the same exact dimensions in length and depth; and use less power at idle and supported; and it gives off less heat.

  Does anyone know if there will be complications with my GTX with a GTX 970 760ti replacement?

  Hello

  So, I also want to put an EVGA gtx 970 in my 51 r2 x. The new alienware x 51 r2s, even with the power supply 330 watts, being supplied with gtx 960s. These require a minimum of 400w, but alienware are themselves uncomfortable with selling them with the new x51s. So I think a 970 should work okay, if you have the 330w PSU. I read a lot of testimony that the x 51 r2s supports the 970 s and same years 980, but I don't want you may have a 980. So I guess I'm torn between 960 and 970

• RX 480 / GTX 970 non - PC Alienware x 51 R1? :) < 3

  Thanks in advance...

  now... Then my R1 Alienware X 51 manage either a GTX 970 (current consumption? / it fits, found a beeing 9.5 inches) or the work of RX 480? ATM I use a GTX 960 4 GB ("draw" power 120W) and before this, I was using a GTX 660 (140W power draw, I even OC it by far: D)... and the GTX 970 would use 145 W max says NViDIA. ... If someone could help me with this? The RX 480 and GTX 970 would cost me the same. The two match. But wise, I'm not sure at 100% power. :)

  Hello

  The RX 480 will require less energy. On this model, we have 2 types of power supply (240W and 330W), so the RX 480 will work with the 240W, but with the GTX 970 we recommend 330W adapter.

• Dell XPS 9100 compatible with Nvidia GTX 980/970?

  All the world either of these new cards video 980/970 series installed in a dell xps 9100? Or whether they will work with the 9100, in particular motherboard/bios original card?

  I plan to upgrade my studio xps Dell 9100 (2010 I7 930 12 GB of ram, motherboard Dell 05DN3X Intel X 58 Intel ICH10R) with a new video card in replacement of the Radeon HD 5870. My choice of card is the new Nvidia GTX 970.

  The GTX 970 and 980 GTX are based on the new Maxwell Nvidia cards with high specifications on page and good price. While they are not suitable for the power of the XPS 9100 (two GTX cards consume less energy than the 5870), I don't know if my original xps 9100 motherboard (with a bios updated from July 2014 on the site of dell driver) is compatible with the gtx 970. BIOS office 8700 recent Dell was not compatible/created a problem of black screen, and Dell has released a updated Bios updated for the 8700 in December 2014 that apparently works fine now with the 980/970 series. I wouldn't drop the $350 on a video card that didn't work with my 9100

  I use the Dell 9100 for video editing (Sony Vegas Pro 13, Hitfilm 3, NewBlue and other programs based GL/CL) works more 3d animation with iclone (who prefer Nvidia). I could probably get another year or two out of it with a newer video card... otherwise I'll put all useful to a construction of the self.

  I'd appreciate any comments on it. Maybe Chris from Dell of this forum would know that he shares the fix for dell bios enabled the 980 work with 8700.  Thanks to Chris if he answers or if he can answer my question gtx 970 for me and other 9100 owners.

  Just this moment installed a MSI gtx 970 in my 3 1/2 years, xps 9100. Original motherboard. The only thing I've really updated over the years is the memory.

  Processor Intel Core i7-960 @3. 2 GHz (8 MB L2 Cache)
  16 GB OF RAM, DDR3 PC3-10600, DDR3 PC3-12800
  NVIDIA GeForce (r) GTX 970 4 GB
  Dell XPS 9100 desktop
  Windows 7 Home Premium (64-bit) SP1

  525 Watt POWER supply was more than enough. You must use both the point 6 and point 8 plugs not one or the other. Biggest problem was to find a second source of power. The 6 + 2 plug, but don't think that the other was there. He was and is buried in the middle of a wire harness. A sheet of plain to 6 points. Just enough.

  It works like a charm. Not at all of the start-up problems

• Bugs of performance NIVIDIA GTX 970 with Photoshop CC - flicker of window resizing.

  Hello Adobe community.

  I recently bought a new computer with a GTX 970 Skylake generation, running Windows 7.  I download the trial version of Photoshop CC in order to test the performance of the machine before I commit to a subscription.

  I noticed a few flickers in the upper part of the canvas, when you try to resize the window by dragging the lower corner in disconnected mode.  I did some searching through the forums and came across a couple of people with similar problems, but it doesn't seem to be a solution outside powered GPU accelerated features.

  Canvas restless movements in Photoshop CC 2015 [was: looking for forum mod/staff with GTX 970]

  I just want to know if this bug can be fixed or I have to choose a different GPU that is supported by adobe?  Quadro is overpriced and quality of consumer parts available?

  No indication on the issue would be greatly appreciated.   Thank you.

  Mick

  Thanks for the comments.  Not everyone comes back and tells us what fixed their problem, and it may be useful to many people.  The stats for the show in Adobe forums > 1 million visits per week!

  Woah!  I thought I'd better go to verify the information, and I was miles. The real number is 1.27 million views per day.  I can't link to the original because it is in a closed area forum.

  With regard to the NVIDIA Control Panel, there are a lot of settings, and you can often make a big difference tweaking their.  For example my laptop that uses a GTX680M, wouldn't let me the value of acceleration GPU, but twenty minutes in the fixed Control Panel.

• Pavilion H8 - 1287c: is the Pavilion H8 - compatible video card EVGA GTX 970 1287c

  I improved the diet of a CX750 Corsair of the 500W this desktop computer comes with the factory.  I was aware before you buy the video card POWER supply might be a limitation.

  With the previous BIOS (7.09) I have tried several things as shown below.  I've always had to a screen where it would beep three times with 10-20 seconds between each beep then it would go to a black screen with a blinking cursor, but you couldn't do anything.

  enabling/disabling the VGA Palette

  toggling SERR # generation

  It is a pain to change the bias, I have need to use the original video card, then replace it with the GTX 970 to see if it worked.

  I called EVGA and they recommended upgrading the BIOS, so I've updated to 8.21.  When the power nothing happens now.  The LCD even lights.  Secure boot is disabled.

  I contacted EVGA, once more and they said I had to contact HP to determine if the computer is compatible with their video card.  This is necessary to receive an RMA number.

  Hello

  First, change the BIOS settings that you changed will do more harm than good.  Change these settings back

  Remove the graphics card and connect the monitor to the motherboard. Your PC starts with the video? If so, then open the command RUN and enter: MSINFO32

  Your PC is running in legacy or mode UEFI?

  Thanks for posting on the forum.

• Conclusion on the compatibility of GTX 970/980?

  I read so many different opinions that I'm now completely confused. I would like to know if it was definitively concluded weather 970 GTX has problems of compatibility with the Adobe Suite. It seems that it is at least NOT supported for After Effects ray tracing rendering engine, but it becomes obsolete anyway. I would like to know if there are PROBLEMS with rendering, playback or export into After Effects or Premiere Pro when you use the 970? Or, if the video card is fully used by the Adobe software? (Excluding Ray tracing)

  UPDATE: I've read that people are successful with the GTX 970 and first pro, but many people are struggling to allow it. Could someone possibly provide instructions?

  Then, you shouldn't have to do something to make it work with first for the acceleration of the EMT.  It will be just plug and play.

• Alienware by default to use of dedicated graphics GTX-970

  Hi just bought an Alienware 17R2 with GTX - 970M.

  But whenever I use the default machine always to the graphics card Intel integrated.

  I want to use ONLY the GTX-970. Is it possible to disable the Intel graphics card and use only the GTX - 970M.

  Thank you all

  Thanks for your reply. I use the AGM with an AMD 290 x and it is a difference bunch better. Thanks for your reply...

• Alienware X 51 R2 - what Miss me to upgrade to GTX 970 FTW

  Hello

  I have gtx GPU 745 and I received a new GPU, the gtx 970 FTW with fan double. We read different forums and sometimes with contradicting information and I must say that I am a little lost in how to change.

  Our main questions are:

  (1) the power R2 board optimized for this dual fan gtx 970 or should I expect to observe problems due to high temperature in the case? We have seen that it seems to be a technical problem with the 970 like gtx with the double sending hot air fan inside the case compared to the fan only. Replacement is not an option, so I'd like t understand the penalty for having the double fan.

  (2) with respect to the power supply. At this moment we have a 240W. Just switch to 330w? We have seen some forums saying that it should require less energy and 330w should be fine, but when you are looking for the GPU to places to buy it is said that it takes min 500w. So I am confused.

  (3) for the records, we went just to 10 WINDOWS

  Is there something else I'm missing? What should be the final configuration?

  Thank you in advance.

  Hello

  It has not validated the Nvidia GTX 970 as an option for GPU upgrade to R2 of Alienware X 51 system. As a result, we cannot ensure that this GPU upgrade will work properly with the system. However, some of our customers have tried this upgrade successfully. Click here to see another thread for more information on this upgrade.

• Z620: Z620 with supply unions 970 GTX double

  Hello

  I bought a pair of MSI GTX 970 games 4 graphics cards of G with the idea of installing in my workstation for GPU rendering.

  I was looking at the connectors power and noticed that two 5 connectors.

  Each 970 GTX requires a 6 pins and a 8 pins.

  I was wondering, do I need an adapter to make the 5 pins for a 6 pin?

  And also, I am able to install two graphics cards in the system? I just need to add extra power cables?

  Any help would be greatly appreciated.

  Thank you

  Hi Brian1965,

  Thank you for your reply and information, it was very helpful.

  I had a quick glance around forums, if you take a look at this link... http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-Z620-workstation-PCI-e-auxiliary-graphics-power/m-p/5651091/highlight/true#M12740

  The thread talking about each individual cable offering up to 216W of power. My two graphics cards are valued at 145W each. If I would be able to use an adapter to convert the 1 6-pin 6 + 8 cables to power a single card, so I would be able to install both?

  I found this adapter, but I was hoping you might be able to advise whether it would work or not?

  https://www.Reichelt.com/?language=en & CTYPE = 0 & MWSTFREE = 0 & CCOUNTRY = 447 & ARTICLE = 160848 & PROVID 2788 = & wt_guka = 22596806657_79177386257 & PROVID = 2788 & gclid = CMKQ2oizvM8CFRMTGwodN3YFyA

  It would be my first time changing graphics etc so I'm not completely clued up on what I would need power wise.

  I asked a local IT guy but he could not help because of not enough information (guess he won't be held responsible if he broke the pc)

  Thank you

  Dan

• HO w do activate the acceleration GPUS for GTX 970 with CS6?

  Hello

  Today, I did a fresh install of prem pro CS6, but it doesn't appear to detect the card GTX 970 I installed last month because it is showing 'software only' in the area of reading in the project settings.  I was running CS5.03 before and after the addition of the type of card in the txt cuda_supported_cards file, it ran very well. (still does)

  Ive changed the same text file in CS6, but it will be only in software mode playback only. I restarted prem and the system but still the same.

  Any ideas? Ive installed the latest Nvidia driver also last week. With CS5.03 still on the system cause problems? (I still have the card Matrox RTx.2 installed also for CS5.03) which is a problem?

  System: win 7 64 bit. 28 GB of RAM; Xeon 2 x 2.66; First pro CS6. Card MSI Geforce GTX 970 (running in standard mode)

  Thank you very much

  Hi Ann

  I tried your suggestion, but option was always grayed out.

  However, I saw in another post, a suggestion to delete the cards taken in charge of cuda in any txt file so I tried it and it now works perfectly!

  Thank you very much.

• The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

  The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

  I want to know as I suppose it would be, but it is not in the configuration required for the cuda acceleration.

  Yes, he does. I have the 980 and it works very well also.

• AE will never work with / support Nvidia GTX-970 cards?

  AE will never work with / support Nvidia GTX-970 cards?

  All the features but that already work with these cards. The only exception is the GPU acceleration of the plotted in 3D rendering engine Department, which is an obsolete feature that is phased out.

  Details:

  Features GPU (CUDA, OpenGL) in After Effects