(Redirected) Quick question about my order
Hi guys I made an order today with a fundraising plan and everything, I got in my email is 'we have received your order"etc... These which means that my order or she didn't? Thanks in advance
Best of this post in the Customer Care Forum, here:
http://en.community.Dell.com/support-forums/customercare/f/4674.aspx
Bev.
Tags: Dell Desktop
Similar Questions
-
Just a quick question about the appearance of the cluster
Hello, this is Matthew, just a quick question about the appearance of the cluster
Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...
What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".
Is there a quicker way to deal with?
THz so much!
You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.
-
A few quick questions about the Satellite P300 - 18 M
Hello
I am about to order a Satellite P300 - 18 M and have just a few questions about this:
(Although these may apply for other similar Satellite/Equium P300.)
Is the touchpad made by / to use the Alps or Synaptics driver?
It has the Wireless N network card, is the map made by Intel or Realtec?
And also, someone has experience with face recognition software to connect?
If so, does it take a lot of time to initalise?
Thanks in advance,
JackHello
The P300 - 18M belongs to the PSPCCE series.
It uses the two touchpad drivers. Synaptics & Alps Electric
There is an Intel 802.11agn minicards WLan installedThe face recognition is a nice tool but local to be illuminated and you must take your face the right of the post sometimes it of not very easy
But if you face is recognized correctly that the connection should work properly
See you soon
-
A question about the order of COLUMN sqlplus and PL/SQL
Hello everyone.
I would like to ask a question about sqlplus command COLUMN that I use in order to define the length of my queries of output columns. So, for example, I run something like:
That is why any column with the name 'the market' will be composed by sqlplus as 20 characters.COLUMN market FORMAT a20
Currently I'm working on a PL/SQL script that makes this automatic procedure, in other words, instead of manually write for each column in the above COLUMN order, it uses the DBMS_SQL. He read first as input the name of the table and then inside a loop, it detects the maximum length.
For those interested, here is the Oracle documentation page that I found (example 8)
http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_sql.htm
If everything worked well enough I managed to recover the maximum of each column in my table length, except that I don't know how to use the COLUMN sqlplus command in my PL/SQL block. I would like to do something like that (it's just a pseudo-code)
I would like to know is there a command in PL/SQL to define the appropriate column typeset in sqlplus length?FOR colIndex in 1 .. numberOfColumns LOOP currentColumnName = getColumnName(tableDescriptionObject, colIndex); currentColumnLength = getColumnLength(tableDescriptionObject, colIndex); COLUMN currentColumnName FORMAT a -- and here after 'FORMAT a' I have to write currentColumnLenth but I don't know how to proceed. END LOOP;
Thanks in advance,
DariyooshHi, Dariyoosh,
Sory, I don't think that there is a simple way to publish SQL * most orders fom PL/SQL.
PL/SQL runs in the database (back-end); There isn't any direct contact with SQL * more at the front end.The best way I know is that PL/SQL script (myfile.sql) with orders of the COLUMN, and then have SQL * more run the script (@myfile).
-
A question about the order of the COIL and blank lines
Hello everyone,
I have a question on the order of the COIL. Here is the syntax of my sql script file
It works quite well, and every time the script is run, the file ' * result.txt "* contains the result of the request." " However, whenever there is a blank line at the beginning of the file ' * result.txt* '. I don't know why this unwanted blank line is inserted automatically whenever I run my script. I have to delete manually (otherwise I have problems with my script Unix interpret these files) and as I have several files to update, this could be your time. Is it possible to get rid of this unwanted blank line?HOST SET NLS_LANGUAGE=FRENCH_FRANCE.WE8MSWIN1252; SET SQLBLANKLINES ON; SET TRIMSPOOL ON; SET SERVEROUTPUT ON; SET LINESIZE 10000; SET PAGESIZE 10000; SET COLSEP '|'; SET HEADING OFF; SET ECHO OFF; SET FEEDBACK OFF; SPOOL result.txt -- And here I write my sql queries. SPOOL OFF;
Thanks in advance,
Kind regards
DariyooshSET PAGESIZE 0;
-
Quick question about redirect ADF security
Hello
We have implemented the ADF security in our ADF application.
We use a login.jspx with safety ADF is enabled and it works very well.
We then created an another login2.jspx but for some unclear reason, whenever we log out, it redirects to login.jspx.
We checked to make sure that pageDef for error2.jspx and login2.jspx files are set correctly; We also checked connection MBean it would redirect you to our home pages/home.jspx page.
We tried to clear the cookies, the browser implements cache and relaunched in JDev.
Yet, we go back to login.jspx when JDev is running.
[21: 15:02]-deployment is complete. ----
Run start time: 16625 ms.
[Optimization application deployed Server Instance IntegratedWebLogicServer]
URL target - http://127.0.0.1:7101/test/faces / home
Manager of the < logger > < error > ServletContainerAdapter not initialized successfully.
What could go wrong?
Thank youCan you check the UIProject web.xml file and see if there are references to your login.jspx?
-
Hello
Oracle version: 11.1.0.7.0 - 64 bit
I read the documentation online at joins. The page is avialable here: joins at
My question is about the join order of evaluation of the conditions in clause and the conditions of those
are not the join conditions and are placed in the WHERE clause.
Consider the following pseudocode
SELECT
T1. Col1,
T2.Col1
Of
Table1 t1 LEFT OUTER JOIN table2 t2
WE
(condition_expression1)
WHERE
(condition_expression2)
Is it correct to say that if there is no column on the status of join (condition_expression1) in condition_expression2, then condition_expression2 is executed before condition_expression1? In other words, oracle always trying to filter based on the WHERE clause individually each table as much as possible before joining them based on the conditions on the article?
Thanks in advance,
Hello
dariyoosh wrote:
Hello
Oracle version: 11.1.0.7.0 - 64 bit
I read the documentation online at joins. The page is avialable here: joins at
My question is about the join order of evaluation of the conditions in clause and the conditions of those
are not the join conditions and are placed in the WHERE clause.
Consider the following pseudocode
SELECT
T1. Col1,
T2.Col1
Of
Table1 t1 LEFT OUTER JOIN table2 t2
WE
(condition_expression1)
WHERE
(condition_expression2)
Is it correct to say that if there is no column on the status of join (condition_expression1) in condition_expression2, then condition_expression2 is executed before condition_expression1? In other words, oracle always trying to filter based on the WHERE clause individually each table as much as possible before joining them based on the conditions on the article? ...
The reverse is actually closer to the truth, but we can't really make general statements like that.
SQL is not a language of the proceedings. Looking at the code SQL, we could say that the code does, but we cannot say much about how that code it. In other words, SQL is a language that describes the results you get, not the way to get them.
The optimizer will do everything what he thinks is faster if it does not change the results. If any order in which they are applied (in outer joins or CONNECT BY queries, for example), then think of the join is done first, and the value of the WHERE clause is applied to the result of the join.
Here is a query looks very much like you posted:
SELECT d.deptno
e.ename, e.sal
OF scott.dept d
LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno
WHERE e.sal > = 3000
ORDER BY d.deptno
;
Output:
DEPTNO ENAME SAL
---------- ---------- ----------
10 KING 5000
20 FORD 3000
20 3000 SCOTT
The scott.dept table contains deptnos 30 and 40; Why are they not in the result set? The query behaves as if the outer join is made first (production 15 rows), then the WHERE clause has been applied. All lines with deptno = 30 had sals down han 3000 and all single line with deptno = 40 was NULL in the sal column, then these lines are excluded (as well as other lines of deptnos 10 and 20), and only 3 lines above are left.
-
Question about pre-ordered Album, (first time)
For my birthday my sister gave me a $ 25 Itunes gift card and I went and pre-ordered the new Album of Metallica Deluxe, (The Set 3 disc) and I confirmed my purchases of 14.99 and my question is,.
Has paid for the entire album in full, or each track when you click on the pre-ordered button? I am responsible for the 1.29 for the first single and again here second single, (two songs)
Will need me even more money or the 14.99 will always cover the entire album?
Will need me even more money or the 14.99 will always cover the entire album?
14.99 + tax will cover it.
When you pre-order, you pay for the titles as they become available and then pay the balance when the full album is available. In the end, you have the complete album for the price of the correct album.
-
Question about the order of stop/f
Hello
We follow several Windows computers using software from a 3rd party provider. (N-Able Technologies) Recently on our servers, we have observed that after some automated routines, we would find that the "Unscheduled stop" window was displayed after these routines. After asking a few questions to N-Able, I discovered that their routine included restarting the command shutdown / r/f in order to ensure that the judgment is carried out successfully.
My question would be as follows:
This could potentially be dangerous to all servers that we have with SQL or Exchange databases on them? It may cause corruption if the databases are forced to stop?
We have servers ranging from 2003 to 2012 with the majority of them being SBS servers.
Thank you
Jesse
Being a server COMPUTER related, I recommend that you ask on the TechNet forums. This site is more for individual consumers.
-
(Redirected) Small question about warranties and accidental damage coverage
Hello
I'm about to buy an Alienware 17 laptop while I'm on business in the United States. I live in Warsaw, Poland, although in Europe.
May I ask what is the process of transfer (if possible) the warranty in Poland?
Also, I can move the "accidental damage" Service and if so how / what is the process?
Thank you in advance,
BR
PPerrakis
PPerrakis
Better make this post in the Customer Care Forum here:
http://en.community.Dell.com/support-forums/customercare/f/4674.aspx
Bev.
-
Just a quick question about drivers for Satellite P500 laptop
Hi, I recently bought a new laptop:
System model: TOSHIBA Satellite P500 PSPGSU-04P00WB
Processor: 2.40 gigahertz Intel Core i5 520 M processor
Video: NVIDIA GeForce GT 330M
CD-ROM: MAST * ONE BD - CMB UJ141AS
HARD drive: Hitachi HTS725050A9A360 [hard drive] (500,11 GB)
I tried to download the drivers on the support site: http://www.csd.toshiba.com/.
but there is no model number the same as mine, I found one that has the same
parts (CPU, video card, etc.). It was ' Satellite P500-BT2N20. I can just download
and use these drviers, right?If you have a model of European cell phone why look you it up on US Toshiba support page?
You can find it on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp? -
BlackBerry Smartphones Quick Question about BBWeather on a Pearl
The weather is supposed to show on my BlackBerry Pearl 8110 desktop? I saw screenshots of the application and the time is displayed in text along the bottom of BlackBerry Desktop not only on the icon of the app but, it was on another BlackBerry device model. No biggie if not bc the weather is displayed on the icon, I just make sure that I'm not missing something.
I think I got it.
-
Quick question about Photoshop and Bridge
If someone buys the Software Photoshop Standard, Bridge comes with it? I think it does, but I'm not sure.
You mean PS CS4? Yes
-
A question about the REEL in sqlplus command
Hi all
I have a question about the order of the COIL and I would be grateful if you could kindly give me a helping hand. Consider the following sql script.
It works pretty well, and all the contents of the table "MyTable" is exported to the textfile "result.txt". However, sqlplus also prints the number of linesSPOOL result.txt SELECT * FROM mytable; SPOOL OFF;
Print after each query. So after you run this script, the end of the file, I always have a line like
How can I avoid this line (the number of returned rows) in my output file?... "20541 lines returned"
Thanks in advance,
DariyooshType this command prior to winding.
set feedback off
Kind regards
Prazy -
Am about to buy DW. 2 quick questions before proceeding. (1) can I associate a DW created an EXTERNAL SQL Express database for the read/write site? Can be made safe? (2) am plans to use Contribute to allow non-technical end users EASILY change the sections of the web site. Can this work? Thank you.
I would like some ideas.
A CMS is the standard solution in the industry today. The most common environment is LAMP (LINUX, Apache, MySQL, PHP).
Some of us to write custom CMS systems for a living. I concentrate on CMS for retirement centers. There are all kinds of solutions CMS available ranging from generalist, off-the-shelf CMS like WordPress, completely custom, with a lot of opportunities in the meantime.
Maybe you are looking for
-
Since the last update, I cannot download more we batch. When I try to upload all the pictures, I get this error message: "An error occurred when downloading files. Maybe the name of the file has forbidden characters, or download folder does not exist
-
How to leave a Web site without closing FireFox?
When I want to close a page of the Web site at the top of the screen, it closes Firefox instead, and I have toreopen it. How can I close only the current web page and not Firefox?
-
Every few minutes (sometimes in less than 60 seconds, Firefox crashes upward. If I try to keep typing I have a message "do not answer" and will have to wait until he's going to continue. This always occurs when you browse through my e-mail, but it ha
-
Hi all I'm under LabView 2013 and have updated all drivers and versions on my local computer and also on the Single Board RIO 9636 I use. My goal is to measure 4 similar entries corresponding to four different microphones and then each individual sig
-
W530 - can't change brightness.
Just installed fresh with all the drivers installed manually company win8 of lenovo supportpages. Using discrete videomode from the bios, and I can't change the brightness of the screen. No keyboard, no mobility Centre or power options. Whats up with