(Redirected) Work at home computer

Similar Questions

• When you work from home I use a computer pc laptop co problem. -What adapters I need connect to Thunderbolt, or is that not possible?

  Not able to use my MBP when you work at home so I'm stuck with a co issue HP laptop - d - sub only for external monitor connection.

  Is there an adapter to allow me to connect to Thunderbolt display?

  I use a Samsung now works with my MBP (because it has a HDMI) and my laptop question k..

  Thank you pte

  If the computer is not a Thunderbolt port, you cannot use a Thunderbolt display.  There are no adapters, converters or cables that will help.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Sound does not work on my computer and the 'secret' is not on. HE WORKS AT HIOME WHEN PLUGED IN MY SPEAKERS... IAM NOT HOME NOW GET OUT ON THE ROADL

  My sound does not work on my computer... It worked when pluged in my speakers at home... I'm not at home so no speakers and I can not get any sound. I checked mute and is not clicked on also the volume upward all the way. What else can cause the sound works do not? Help is greatly appreciated.

  BJ Gawle

  Hi B.J.Gawle,

  Method 1

  Looks like you're using a laptop and this would happen if the default audio device is not set to internal computer speakers.

  (a) open the Control Panel.

  (b) double click on the sounds and Audio devices icon.

  (c) click the Audio tab and under audio playback, select the audio device on the laptop.

  (d) click apply and restart the computer, check to see if it helps.

  Method 2

  If fails it above step then check out the link below and run the Fixit tool available, check if it helps.

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/AudioPlayback/

• My office uses Windows 7 and my computer is running Vista 64 bit. My home computer can work with my office from a USB files?

  original title: office / Home compatibility

  My office uses Windows 7 and my computer is running Vista 64 bit.  My home computer can work with my office from a USB files?

  The game, August 5, 2010 15:24:35 + 0000, JerryPMP wrote:

  My office uses Windows 7 and my computer is running Vista 64 bit.  My home computer can work with my office from a USB files?

  Yes. There is no problem with their two different versions of
  Windows. The files contain not what anyone who still marks that
  Windows version they were created under.

  But there is a potential problem. If the files have been created with a
  another version of Office that you have, you may have
  Difficulty reading the. For example, Word 2007 and 2010 creates .docx
  files by default (unless you tell her save as .doc) and if you
  an earlier version of Word, you will not be able to open a .docx file
  unless you install the compatibility pack to
  http://Office.Microsoft.com/en-us/Word-help/open-a-Word-2007-document-in-an-earlier-version-of-Word-HA010044473.aspx

  or http://tinyurl.com/29f5scy

  Ken Blake

• my program of creative suite 3 works on the computer of windows Home premium 64 bit? I need to switch computers because my current pc is windows xp

  my program of creative suite 3 works on the computer of windows Home premium 64 bit? I need to switch computers because my current pc is windows xp

  Yes, but you may need to use compatibility mode to install.

• I got alltel for internet and had to get a craddlepoint router now since switching to ellementmobile I had to get a gateway router cdw530am mdl, but it won't work on my computer at home?

  I had alltell for my internet and had to get a craddelpoint router so I could use my home computer and laptop at the same time, but given that the switch to mobile really, I had to get a combo wifi broadband gateway mdl cdw530am, but now my home computer does not connect to the router , but the laptop with no promblem has anyone else had this problem?     any help would be greatly appreciatted!

  Install the drivers for your new device

  Good luck!

• Issue to receive the error message "the system has recovered from a serious error" while working on the computer and the computer restarts automatically.

  Original title: The system has recovered from a serious error-

  The system has recovered from a serious error-

  When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.

  What is the solution for this?

  Hi Sandeep,

  Thanks for posting your question in the Microsoft Community forum.
  It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  Method 1: I suggest following the steps listed in the article and check if it works.
  Error message: the system has recovered from a serious problem
  http://support.Microsoft.com/kb/316424

  Method 2:
  I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
  You can see the article for more information:

  A "System has recovered from a serious error" message after every restart.

  http://support.Microsoft.com/kb/317277

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Diagnose Windows Update does not trouble; said needs change to control panel home computer is not found; get a sound error

  Windows update install not about 1/4 of the updates.  The diagnosis of accreditation site Fix Web does not run; said needs to change to the Control Panel home computer that just sounds wrong asked what computer to find.  Nothing in the regular Panel reports.  How to fix?

  Hello

  1. you get any error message?

  2. what Microsoft fixit you talking?

  3. were there any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Check out the link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• How can you change a password on Vista for a group of net work at home

  How can you access the area to change the password for a group of net work at home? I'm unable to find had worked well but formatted Vista computer to make it faster. Now unable to find the box to change the password. Another computer on a network running 7.

  Hello

  What password are you talking?

  If it's regarding network sharing again the sharing.

  Maybe this can help.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• No wireless networks not found on laptop - the WiFi windows service does not work on this computer

  Hello

  I have a laptop model Toshiba P205-56347 running Vista home premium and a lynksis WRT54G V8 router model.  The WLAN light is solid and the internet light flashes on the Linksys.  I have Comcast cable as my ISP.

  I've seen reported similar problems.  All of a sudden my wirless acess stopped working, some networks are displayed and I get the message 'windows wireless service does not work on the computer.  I am not able to restart the windows wireless.  I can't connect to the internet on the laptop.  I have a DELL PC and can access the internet here if necessary.

  In the network and Discovery Center, I see that network discovery is disabled.  I can't set it to on.

  Under system devices, I have the following network cards: Intel (r) Wireless WiFi Link 4965AGN and Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS6.0).

  Help, please.  I'd appreciate any help.  I need a good starting point for resolution and wouldn't start using suggestions that corrects other issues.  I design financial systems and purchase online, but I'm not a technical person with regard to updates Vista, drivers, etc..

  Thank you! After reviewing the responses to similar problems, can anyone suggest if I should try one of the following values: 1. run SCF/scannow at the command prompt I don't know what that's going to fix it and do not want to make the current problem worse. 2. download the driver for the network drivers. If you would be grateful if someone could help me find the driver and download it. 3 reinstall Windows Vista Home Premium SP1 since the restoration of Toshiba CD I would appreciate greatly any information. Donna

  Hi blondswede,

  You can try running sfc/scannow to see if you have corrupted files. That won't be a further problem on your pc. After that, you want to make sure you have the latest drivers for your laptop, especially drivers of the NIC (network card). Go to the following link to Toshiba for your model and download those:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=1757721&RPN=PSPB3U&modelFilter=P205-S6347&selCategory=3&selFamily=1073768663

  If you're still having problems, and it has recently emerged as a problem, you can try to restore your system to a point in time before the problem started to use the system restore. Here are the steps to follow:

  • 1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    2. In the System Restore dialog box, click on choose a different restore point and then click Next.
    3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. Click Finish.

    The System Restore tool

    If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    To restore the operating system to an earlier point in time, follow these steps:

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know how it works and if you need additional assistance.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why any screen recorder does not work on my computer? __

  Why any screen recorder does not work on my computer?

  Hi I formatted my computer and downloaded all the conditions for this, I downloaded hypercam and installed, I tried to open it in the tool bar and the start menu, it still does not work.
  I downloaded another program for recording of the screen, it also did not work, I tried 3 programs, they all did not work
  by the way my computer: windows vista service pack 2 and the screen recorders have worked before I formatted my laptop
  I need a solution pleaseeeeee

  I got this error in the three programs

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: ScreenVCR.exe
  Application version: 1.5.34.0
  Application timestamp: 2a425e19
  Fault Module name: StackHash_b4c3
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000096
  Exception offset: 02e42a3b
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: b4c3
  More information 2: d2a8bebd21e0e9bfa99e084d53ece2b6
  3 more information: 74a 3
  Additional information 4: 0480b6e0a2e7a1df44ee618ae8d0084f

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Please give me a solution... :(

  my laptop computers Info

  Windows is Windows Vista Home Premium
  Intel (r) core (TM) 2 Duo CPU 26500 2.10 GHz
  3.00 GB RAM
  Mobile Intel (r) 4 Series Express Chipset Family

  =============================================
  Just a thought... maybe your video driver or DirectX needs and update?

  Have you tried the following applications:

  (1) Windows Media Encoder 9 Series
  http://www.free-codecs.com/download/Windows_Media_Encoder_9_Series.htm

  Direct Download Link:
  http://www.free-codecs.com/download_soft.php?d=571&s=327

  First steps with screenshot
  Using Windows Media Encoder
  http://www.Microsoft.com/windows/windowsmedia/HOWTO/articles/ScreenCap.aspx

  (2) Microsoft Expression Encoder 4
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=75402be0-C603-4998-A79C-becdd197aa79

  Expression Encoder training videos
  http://expression.Microsoft.com/en-us/cc197144.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I try to open a work at home and the program asks us when starting:

  I try to open a work at home and the program asks us when starting: "you are not an administrator on this computer. Please add your id to the local administrator group on this computer. "How to do this while my account is already an admin?

  I try to open a work at home and the program asks us when starting: "you are not an administrator on this computer. Please add your id to the local administrator group on this computer. "How to do this while my account is already an admin?

  Instead - right-click on anything whatsoever that you try to open and choose 'Run as administrator'.  Best?

• JavaScripts stop working on another computer

  Recently purchased Acrobat DC through my school. I was with Acrobat X to create everything. Writing javascripts (and even received help here before), and it worked fine.

  Needed to update a PDF Kit we use regularly. It uses form fields in duplicate, document level scripts and scripts of computation of field.

  Kit #1 - still works. No problem there.

  Kit #2 - uses the same scripts. Not working no javascripts.

  script hide/show-2 radio buttons has been added.

  -I used the new feature to hide and show fields under mouse actions first. When this does not work, I went to a javascript.

  -Kits were created on my computer at home. (I better work from home and have more time. In addition, they don't give me the full version to work. "This is the military, long story.)

  -He sent to my work computer, bam, nothing works.

  Here, is the fun part; It works fine on my home computer. While at work the oldest kit still works, so that the new work not at all. As a reminder, the scripts are the same. Acrobat says he's able to be read by all versions at a time.

  DC Pro: Build 006.30174

  Drive home: XI player

  Drive to work: DC

  So, what do you think? I'm puzzled.

  Yes. Work email has been stripping on the javascript. It is the question. Almost a whole week of crazy and it's something simple.

• with the apps to work at home

  We have just started using CC to work and sometimes I work from home. Can I access my account and use apps at home?

  You can have the creative cloud installed and signed in on two computers as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software.

  You can download the installer for Creative Cloud from here:
  Creative cloud help | Creative cloud desktop.

  After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications

  If you get a new computer, simply log out of creative cloud over one of the other and log on to the new.  Connect, disconnect you and | Adobe Creative Cloud desktop app

  Guinot