Redness of data and report of ashes

Similar Questions

• Shading, comparison of dates and report Word

  Hi guys,.

  I need help. I, I compare a few dates in a table, if I find a date prior to the date today, I have to shade or color the background of this cell in green or red and set the table, in a report to Word.

  Attached, that's what I'm trying. For now I'm just dealing coloring for January. If it works, I will apply it to the other months.

  Need help please.

  James.Morris wrote:

  So definitely pay attention to my comments above and the comment by ben on your formatted string. If you ignore these suggestions and difficulty only the only thing you ask comments, you will be here with more questions or spend a lot of time additional debugging your code.

  As to the specific cell background color, you can access the Word.Tables object instead of the object of the Document that you were using. On this basis, you can go to a specific cell and set the color. As follows:

  

  I added this to your code and it worked. The digital input from the left is connected to the loop index, it is thus goes to the line concerned for all what cell you analyze now. A key to note here is report indices are base 1 instead of 0-based.

  Even simpler than this, use the Word and the palette of Word tables Shadind.vi table borders!

  Ben64

• Record data and report to the subfolder

  Hello

  I spend a day trying to solve this 'stupid' thing, but now I raise my white flag.

  Hope someone could show me the way.

  In my script, I want to organize so as to have the output result:

  TOC files in the folder "testdata".

  PDF + xls in the folder "testdata document «--------»»

  I am able to create the testdata folder, but no idea how to create the subfolder.

  The testdata folder must be a variable because it changes per event.

  I've highlighted the error in my script.

  Dim myfold
  myfold = inputbox ("Nome della prova insert", "diadem", DataSetName)
  Call foldercreate (DataReadPath & myfold)
  Call foldercreate (DataReadPath & myfold\'documents')

  REM ' save data developed
  REM if (FileNameGet ("NAVIGATOR", "FileWrite', DataReadPath & DataSetName & myfold &". "& DataExtension) ="IDOk") then
  REM Else ' dialogue has been cancelled
  REM call MsgBoxDisp ("data economy has been cancelled")
  REM End If

  Good bye

  Giovanni

  Just put in the "/" between the Documents and the name of the file.

  Paul

• OfficeJet 6700 premium print date and time on the fax history report

  Running Windows 8.1 on my OfficeJet 6700 Premium AIO H711n fails to print the date and time on the historic report of the fax.  I need this information to check the box of cylinder head of the fax the documents have been sent.

  Hello dcflorida,

  I did not the 6700 but on another machine, I had to 'reset', time and date in the printers preferences.

  If you haven't done it yet, go to Settings/preferences/time and Date on the All in One printer set up (once again if necessary).

  IF your machine does not have the time / date on the history report, it includes it in the Confirmation page?

  Here is the link to the Manual too.

• Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Hi Anandsable,

  The question you have posted is based on Exchange 2010, it is better suited in the Exchange Server forum. Please post your question in the following forum:

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer, exchangeserverlegacy.

  Hope the helps of information.

• Date and time are red?

  Hello

  I just installed some new hosts and after setting the time setting the Date and time are in red, even though it says "Running" attached is the error.

  Any help would be great solve this.

  Thank you

  Is set up your NTP server? Your hosts can communicate with the NTP server?

  The last time I saw this it is a steep (hours, minutes not) between the time of the machine worked the VI client and guests. Turns out that we had a problem with the NTP configuration. Once we have activated NTP and synchronize it returned to black. He did take some time, maybe 5 minutes or so, for the VI client to recognize the time on the host was updated however. A SSH on the server quickly determined that the clock has been corrected almost as soon as the NTP problem has been resolved.

  Another possibility is that the clock on your computer that is running the VI client is wrong.

• Problem link DB between active Data Guard and reports application database

  My version of the 11.2.0.2.0 and OS database is Oracle Solaris 10 9/10.
  I am facing a problem in my custody of data Active data base for purposes of tax. Active Data guard information is as below.
  
  SQL > select name, database_role, open_mode from v$ database;
  
  NAME DATABASE_ROLE OPEN_MODE
  --------- ---------------- --------------------
  ORCL PHYSICS READ SHALL ONLY APPLY
  
  Detail of the problem is less than
  ------------------------------
  I have created a db link (name: DATADB_LINK) between active data guard and report of application of data base for purposes of tax.
  SQL > create database DATADB_LINK link to connect to HR identified by HR using 'DRFUNPD ';
  Database link created.
  
  But when I run a query using db link to my database of enforcement report I got this error below.
  
  ORA-01555: snapshot too old: rollback segment number 10 with the name ' _SYSSMU10_4261549777$ ' too small
  ORA-02063: preceding the line of DATADB_LINK
  
  Then I see logfile named database alart Active Data Guard and get below error
  
  ORA-01555 caused by the following SQL statement (SQL ID: 11yj3pucjguc8, time of request = 1 sec, SNA: 0x0000.07c708c3): SELECT "A2". "' BUSINESS_TRANSACTION_REFERENCE ', 'A2 '. "' BUSINESS_TRANSACTION_CODE ', MAX (CASE 'A1'. "TRANS_DATA_KEY"WHEN "feature' AND 'A1'." " END OF TRANS_DATA_VALUE"), MAX (CASE 'A1'. "TRANS_DATA_KEY" WHEN 'otherFeature' THEN 'A1' '. "" END OF TRANS_DATA_VALUE")
  
  But the interesting point if I run the query report directly in the Active Data Guard database, I got never error.
  
  So it's a problem of link DB between active Data Guard and other databases?

  Fazlul Kabir Mahfuz wrote:
  My version of the 11.2.0.2.0 and OS database is Oracle Solaris 10 9/10.
  I am facing a problem in my custody of data Active data base for purposes of tax. Active Data guard information is as below.

  SQL > select name, database_role, open_mode from v$ database;

  NAME DATABASE_ROLE OPEN_MODE
  --------- ---------------- --------------------
  ORCL PHYSICS READ SHALL ONLY APPLY

  Detail of the problem is less than
  ------------------------------
  I have created a db link (name: DATADB_LINK) between active data guard and report of application of data base for purposes of tax.
  SQL > create database DATADB_LINK link to connect to HR identified by HR using 'DRFUNPD ';
  Database link created.

  But when I run a query using db link to my database of enforcement report I got this error below.

  ORA-01555: snapshot too old: rollback segment number 10 with the name ' _SYSSMU10_4261549777$ ' too small
  ORA-02063: preceding the line of DATADB_LINK

  Then I see logfile named database alart Active Data Guard and get below error

  ORA-01555 caused by the following SQL statement (SQL ID: 11yj3pucjguc8, time of request = 1 sec, SNA: 0x0000.07c708c3): SELECT "A2". "' BUSINESS_TRANSACTION_REFERENCE ', 'A2 '. "' BUSINESS_TRANSACTION_CODE ', MAX (CASE 'A1'. "TRANS_DATA_KEY"WHEN "feature' AND 'A1'." " END OF TRANS_DATA_VALUE"), MAX (CASE 'A1'. "TRANS_DATA_KEY" WHEN 'otherFeature' THEN 'A1' '. "" END OF TRANS_DATA_VALUE")

  But the interesting point if I run the query report directly in the Active Data Guard database, I got never error.

  So it's a problem of link DB between active Data Guard and other databases?

  Check this statement that applies to your environment

  * ORA-01555 on Active Data Guard Standby Database [1273808.1 ID] *.

  also

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:8908307196113

• ? Primary Master Hard Disk S.M.A.R.T. Bad Status. WARNING: Return immediately-up your data and replace your hard drive.

  When I start my computer, an error page appears. At the bottom of the page it says, "Primary Master Hard Disk S.M.A.R.T. Status Bad." WARNING: Return immediately-up your data and replace your hard drive. Press F1 for Setup, F2 to continue"I was just pressing F2 and then it starts normally, but whenever I start my computer, the same page comes up.

  Is this serious or it could be something minor? Do you have any suggestions? What does that mean? What should I do? I followed some information in the forums of someone who has had the same problem and finally, they fixed them, they said that when they made a prior microsoft update what they where missing a Parcer.

  Note: I tried to save my data before, but something goes wrong and the backup will not be completed.

  You can download the program for diagnotics HUtil Samsung http://www.samsung.com/global/business/hdd/support/downloads/Hutil210_iso_for_CDROM_drive.zip

  It's an ISO image then unzip the file and write the ISO image to a CD.

  Then restart the PC and booting with the CD. To do this, you must change the priority/boot order in the BIOS to boot from the CD first.

  Once you have started the program HUtil it will detect your hard drive Samsung. Select the hard disk.

  Enter the main Menu on the tool. Go into the menu of the tool and enter Auto diagnosis. Enable diagnostics to run, once done it will ask you if you want to perform a surface analysis - enter Yes. The analysis of surface will take some time to complete. If errors are found, it reported.

  Once more I recommend you backup your data as soon as possible, preferably before executing HUtil program.

  For more information on the program of HUtil you can go here: http://www.samsung.com/global/business/hdd/support/utilities/Support_HUTIL.html

  Write when the cache is enabled: when data are written back to the hard drive, it is written in the cache that is much faster to actually write to the hard drive. An acknowledgement of receipt is then sent by saying that the data has been written on the hard disk, when in fact it does not. In this way so that the data is actually being written to the hard drive to the rest of the system can continue to work. However memory cache is volatile, if the power goes off, the data in the cache is destroyed and if it has not been written to disk hard and yet he's lost.

  If your settings are correct. Usually the drives are configured for performance and the write cache is enabled. While flash drives and memory cards are configured for the fast-moving and write cache is disabled.

  If you want to learn more about this: http://www.pcguide.com/ref/hdd/op/cacheWrite-c.html

• How is - that someone is uninstalled S.M.A.R.T. (Self Monitoring and Reporting Technology) of Windows Vista?

  Yesterday morning, S.M.A.R.T. (Self Monitoring and Reporting Technology) technology has taken control of my data recovery files and tries to extort a fee to join their program. but I can be released from their 'hold' on my computer if I go to: all programs, and then in the data recovery folder, then to the uninstall option and then uninstall S.M.A.R.T.   The problem is that VISTA does not have a record of data recovery I can access, then, what do I do?

  Hello

  There are a few variants of S.M.A.R.T.

  Follow these guides.

  http://www.bleepingcomputer.com/virus-removal/Remove-Smart-HDD

  http://www.bleepingcomputer.com/virus-removal/remove-smart-fortress-2012

  http://www.bleepingcomputer.com/virus-removal/remove-smart-protection-2012

  See you soon.

• IDS 4215 date and time change after restart

  Hello

  I am facing problem with cisco IDS 4215 (version 6.0), date and time of change in the device after reboot. What is the command to save the configuration. record or write mem does not work.

  Amarjeet Singh

  Once the date and time changes are applied Cisco IPS CLI, they should have been saved. No additional step of "savings" manually is necessary.

  Also, have you thought about Configure NTP on IPS server. IPS synchronizes time with NTP server, if there is no difference.

  I suggest you contact Cisco TAC and report the problem of equipment.

  Kind regards

  Sawan Gupta

• Apex: button to add dynamic date and user for the article page

  [warning... post newbie]

  I have a simple table of questions and actions.

  users change/update records using the form on a table with the report.

  There is a comments column to record the latest updates; users must add their name and the date at the top.

  I am currently using a button that calls a dynamic action to execute javascript to insert the date and the user at the top of the text in the field comments (UPDATES_NEW_ON_TOP)

  problems:

  1 Insert date works on firefox/chrome but not IE

  2. can't seem to find the right code to insert the currently logged in user name

  extract javascript below...

  Notes:

  -After reviewing the packaged applications I see more elegant ways to do this but we are going the long way to learn stuff

  -the JavaScript below is probably very poorly formed - apologies if it upsets anyones sensitivities of coding

  -open to any means to achieve the desired result

  beer on me for any assistance that you can give

  var d = new Date();

  var monthNames = ["Jan", "Feb", "Mar", "Apr", "May", "Jun",]

  "Jul", "Aug", "Sep", "Oct", "Nov", "December"];

  document.getElementById("P3_UPDATES_NEW_ON_TOP").innerHTML =.

  d.getDate () + ' - ' +.

  monthNames [d.getMonth ()] + ' - ' +.

  "" d.getFullYear () + ": [ID] +.

  String.fromCharCode(0)) (13) + string.fromCharCode(0)) (13) + P3_UPDATES_NEW_ON_TOP.value;

  ;

  Thank you all for your contributions and redirects

• What social media analytics and reports do you use E10?

  What social media analytics and reports do you use E10?

  I am very curious as Marilyn well. I had some difficulty in finding ways to measure social with Eloqua.

  I used the report Social Media breakdown under Web site reports, but the data are very basic and I can get a lot more Google Analytics. The SocialMedia_PowerHour.ppt is well over a year, and a version of the E10 could be very useful.

  I'm looking for ways to see traffic to landing pages and forms that come from social media sources.

  Also is there some ETA on a possible link Eloqua GA?

• Problem with the registration date and time: only one date is recorded

  Hello community,

  I have the following problem:

  I automatically stores the datetime values in a date column "changed_on", whenever a user saves a form.

  Unfortunately, when I show this value in a form or report, only the correct date is shown. Still, the time is 00:00. There is no time in the database value, too.

  

  Whenever a user clicks the save button in my form, the value of "changed_on" is generated by a calculation that returns "sysdate" (see image below).

  I think I tried everything now, but I can't understand how to record the date and time correctly. I already tried the format for the changed_on field mask to my preferred format, but it does nothing (jj. MM YYYY HH24).

  How can I automatically record the date and time?

  You need two things.

  1. put the mask of the P3_CHANGED_ON element to JJ. MM YYYY HH24

  2. change your source of calculation to

  TO_CHAR (sysdate, ' DD.) MM YYYY HH24 ')

  In this way, what holds the element and implicit conversion happens when recording records will match.

  Thank you

  -Jorge

• 'modernize' forms and reports Oracle version 6 (1995)

  We would like to 'modernize' forms and reports Oracle version 6 ERP (1995) that we have developed and I saw gold alternately Oracle Forms and reports in APEX is. We saw a little bit "and we had some problems related to the navigation of the 'grid'. " Our customers in data entry are accustomed to move in grey with enter or Tab to insert new lines and move with the arrow keys. APEX, from the little that we have spent to make a new line, you must click on a new line, you must click on Save to save, to move the arrows are not covered. 90% of our masks are masters details and I tried using the example and I tried to adapt to the navigation of our customers with poor results, but I didn't spend too much time. A good alternative to the deferral report and form in Oracle environment it? Apex is the right way? you can get these things slamming a little ' head? Now, we have tried with PHP configured so that to approach the masks made with forms and States, and libraries DHTMLX... but they are a bit "away from the excellent and actually I use this combination more like business intelligence and statistical computing in general as actual data input masks. " I'm at a crossroads and continue with DHTMLX PHP or try to get your bearings on APEX. For years, we use Oracle DB and if we could take advantage of the APEX in the right way (without changing the lives of our customers with too many clicks on the buttons!) It would be great! Or is there something else around!

  Apex is a very good product, however is not a replacement for forms.  It can be used to replace Oracle Forms, but he will rewrite a complete application for most.  It will have benefits and drawback compared to Oracle Forms.  Oracle ADF tends to be a better match for Oracle Forms solutions.  That said, why did you choose to completely rewrite your old application Forms investment of 20 year?  Why not upgrade to forms the latest version which is 11.1.2.2.  With this new version, you can easily integrate with other product (Oracle and non-Oracle), take advantage of many new features and much more.  The main advantage for you (your organization), it's that you won't need to completely rewrite the code of your application.  It is quite simple to form 6 to 11.  Some minor code changes peut prove necessary, but most of the time you can move at will 11 version very little effort in most cases.  Many customers have upgraded to the latest version without changing code at all.

  Information on the latest version of forms can be found here:

  http://www.Oracle.com/technetwork/developer-tools/forms

  Check out the upgrade to 6 forms 11 documents in the Documentation Library for version 11.1.2.2

  http://docs.Oracle.com/CD/E48391_01/index.htm

  Once you upgrade to version 11, you can even enjoy some of our Partner solutions.  For example, you can use AuraPlayer to access your business logic of forms on a mobile device.

  http://www.auraplayer.com/

  If you need assistance with the upgrade, Oracle Consulting or other partners such as the PITS can help.

  http://Pitss.com/

• In Muse miniature slideshow container, I have images where data in image properties can be set. SEO search engines see the data and help the visibility of my site?

  In Muse miniature slideshow container, I have images where I can insert the data of image properties. SEO search engines see the data and help the visibility of my site?

  Post edited by: Howard Lower and rewrote the question because I have yet to get a response.

  Yes, they will be included in the report.

  Please check these links:

  https://helpx.Adobe.com/Muse/how-to/add-alt-text-and-ToolTips.html

  https://forums.Adobe.com/thread/1747973?start=0&TSTART=0

  Thank you

  Sanjit