Reduce and the passage of all elements on the page

Similar Questions

• How to create a validation "not null" unique for all elements in a page?

  Hello world
  
  How to create a validation "not null" unique for all elements in a page? I love textfields. Rather than create "not null" validation for each article, I would like to create a single validation control that will be used
  
  Thanks and greetings
  Umer

  Nice1 wrote:
  Bob, like u said I did the following:

  (1) less to create a button, there are 9 elements, and for each item, I put in the light of 'yes '.
  (2) under the button Delete, there is 1 point and have in light of the 'Yes' for the item
  (3) validation of the page defined for the 9 items under 'create a button' and put it to fire when 'create' button clicked
  (4) the page validation set for 1 number under 'remove' button and put it on fire when "delete" button clicked

  now, when I click on the 'create' button it shows same for the item under the "Delete" button that's a required element

  Sorry, I do not see this note. The required model will not work, there is no way to attach it to the button.

  The best solution is that the answer only a few answers to the top

  Create 2 validations page type as a PL/SQL with code

  1st validation
  
  :P1_ITEM1 IS NOT NULL and :P1_ITEM2 IS NOT NULL ...... and :P1_ITEM9 IS NOT NULL  include all 9 items
  
  Set the When Button Pressed to the CREATE button
  
  2nd validation
  
  :P1_ITEM10 IS NOT NULL
  
  Set the When Button Pressed to the DELETE button
  

  I think that this will be the best way to do it.

  Published by: Bob37 on April 27, 2012 12:02

• I downloaded several updates available for Windows Vista and since that time, I was not able to access my emails. I use netscape and the page opens and freezes.

  I downloaded several updates for vista (no critical updates) and since that time, I was not able to access my emails. I use netscape and the page opens and freezes. What should I try?

  original title: EMAIL GEL

  Hello

  What updates do you have installed?

  Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig in the search box
  2. press ENTER.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• correct the page id and the page id application id and the id of the sensitivity of the other developer then

  Hi all

  I use apex 4.2 on windows World Bank on internet explore

  I followed the following link

  Oracle - button apex to call a page in another application - Stack Overflow

  at the end of the page, solution provider says

  It seems that your application id and the page id resemble developer links for your pages. You can't share a session as well. It could even be your problem: If you want to bind the user to the page of an application, use the ID correct and not the developer.

  what it means?

  How do I Unlike id and the real id of the developer?

  Please guide me because I think I'm also give the URL of developer which I just copy the URL of the web browser.

  Kind regards.

  Maahjoor wrote:

  I use apex 4.2 on windows World Bank on internet explore

  I followed the following link

  Oracle - button apex to call a page in another application - Stack Overflow

  at the end of the page, solution provider says

  It seems that your application id and the page id resemble developer links for your pages. You can't share a session as well. It could even be your problem: If you want to bind the user to the page of an application, use the ID correct and not the developer.

  what it means?

  This means that, following the structure of the URL of the APEX, in the example

  f?p=4000:4150:&APP_SESSION.

  the application ID is 4000, and the page ID is 4150. 4000 is actually the ID of the application that provides the APEX Builder Application development environment, and page 4150 is the definition of the pages it contains. Application between 3000 and 8999 ID are reserved for internal use of the APEX, so any application ID share you will be outside this range.

  How do I Unlike id and the real id of the developer?

  Please guide me because I think I'm also give the URL of developer which I just copy the URL of the web browser.

  There is no such thing as 'developer id' and 'real id '. Developers and end users run applications using the same ID.

  Note that published URL of permanent demand within applications should use alphanumeric calls and page aliases, ID not digital. This allows a fixed URL to provide to end users while allowing developers and administrators flexibility in how applications are deployed and maintained over time.

  If you have any remaining doubts, provide all the details of what you are doing, including the URL that you create.

• import of page loses references of region model and the page template

  I have a dev and test environment. The test workspace is an export of the workspace of dev. Both applications have the same id app.
  
  I export a dev page and import to test. This works.
  
  I run the test page and the page does not. When I had the look of admin test page model has been implemented by default and the 'report' two models of User Interface have been updated the model No. and the submission of the report was by default (standard) HTML, that is not what was in the app dev.
  
  I looked at the page in dev and the page model was a standard tabs, UI were region of report and the presentation of the report was 101. Standard, row of alternating colors.
  
  Does anyone have an experience with imports no implementation of pages they were exported?
  
  TIA,
  
  Sam

  Sam,

  The object associated with an application are created specifically for each application.

  Whenever you create a component that a unique ID is assigned for use as the primary key, although some components have composite primary keys - a page, for example, is identified solely by the application ID and the ID of the page.

  Then, unique IDS are not transferable through an import / export.

  Install an application and keep the ID of the original application won't change any internal ID in the installed application.

  If the ID name and app object were used to the "key" which would allow applications to be a little more portable/leachable (is that a Word).

  I don't see how it works, or how it would do something more flexible that it isn't already.

  The import of components and of the page, but when he tries to use the same ID internal to the models and other application classes opposed the ID internal are not the same as the IDS exported and therefore fail.

  Right. The ID of the shared components, such as templates, referenced by the page that you have installed are the IDS used in the application that you have exported the page of. Normally, you should install the page in an exact copy of this application, one with the same ID for components shared as the source application. But you've actually created two new applications in two different workspace by changing their application during the installation ID, which makes them 100% dissimilar for such purposes. (Regardless that they now have the same application ID, they cannot be correlated).

  Where can I find a list of the components that are unique to the current mix of work/App space IDS and those who are not independent.

  All components except the pages and applications, I think, get their identity papers adjusted when you change the application during the installation of the application ID.

  Now, what you could have done when you request 202 and want to make 150 has been to change the export file and changed several references to 202 to 150, remove app 202, and then use SQL * more to install the application using this file. There would have not been in the ID being adjusted.

  Scott

• I bought a mouse microsoft 4000 mobile. It came with no disk and the page, to what he tells me to go said that is down. What should I do?

  I bought a mouse microsoft 4000 mobile. It came with no disk and the page, to what he tells me to go said that is down. What should I do?

  Hello

  1. what exactly is the problem?

  I suggest you explain clearly to us the question so that we can better help you.

  To troubleshoot failures in the response to the mouse or wireless keyboard, see this link: http://support.microsoft.com/kb/838398

  It will be useful.

• Why are the breakpoints and the page from the master page settings not inherited by all pages?

  Hello

  I've been busy creating a sensitive site with points to stop and a fluid width. Everything works now on my master page. But I found my breakpoints and the parameters of the page were not inherited from my master page for all other pages. To manually create all exactly the same breakpoints would be a lot of work. Can someone help me with the please my problem?

  Kind regards

  Tim

  When you apply a master page with breakpoints to another page, the breakpoints are displayed as markers of white triangle. All you need to do is add your breakpoints in the same place as markers.

  The reasoning behind this is likely that sometimes the content of the page should be changed more than the constant elements in the master.

  I hope this helps.

  David

  Creative muse

• I'm clicking on hotmail and the page that appears is a bunch of jibberish. Random numbers, letters and symbols. How do my email?

  How do my hotmail? The page is jibberish that loads. What is going on?

  Thank you

  Brok

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

• Unable to print a web page and the page number on print preview.

  Original title: printing problem,.

  Hi when I use a web page I can not print. When I go to preview before printing, it has only the page number on it. What should I do about it.

  Thank you very much, David

  Hi David,

  1. what web browser do you use?

  2. what web page you want to print?

  3. you are facing issues with a specific Web site or all sites?

  4. are you able to print using other applications?

  If you are faced with the question when you use Internet Explorer, you can read the following article and check if it helps.

  I can't print or preview before printing a Web page in Internet Explorer

• Beginner jQuery is having trouble with the links and the page redirect and page caching.

  Hi all

  I'm trying to update an old legacy of multipage site (each page has headers html etc.), adding jQuery Mobile. Most of the time it goes well, but I'm having some problems with the links, the redirect of the page, and caching.

  I write javascript like this...

  < script >

  -do things - then-

  Window.Location.Replace ("Page1.html");

  < /script >

  and links like this

  
  

  < a class = "-ui ui-btn-b btn tsize1" href = "page2.html" rel = "external" > page 2 < /a > "

  
  

  CACHING ISSUES

  
  

  On many pages - such as those that I have problems with, I've added no caching of code as...

  < head >

  < META HTTP-EQUIV = "Pragma" CONTENT = "no-cache" >

  < META HTTP-EQUIV = "Expires" CONTENT = "-1" >

  ... more...

  < head >

  Problem: for example, I can go to Page 1 and click on a link to go to page 2 and page 2 has the lines "no cache" header. The problem is that a fresh change of page 2 does not appear even with no cache lines above and even if I hit refresh in the browser that I thought it was supposed to reload the page (live get of the site). On the contrary, it seems to continue to see the old content before the update.

  In another case I could be on page 21 and click on a link that goes to the publicationfootnote22 and made a few treatment database and then goes to the page33. In this case, my fees top22 updates are not appearing and showing just the old cache data.

  Q: what is the best way, at least while I am writing code, to force the Page to refresh (non-cache), I can see my updates all the time, because otherwise it becomes very confusing because I'm sure you know.

  Thanks in advance: Dave

  Hi Dave,.

  Are you handy with your developer tools? It's always where I head when I need to look inside something. Before getting anywhere in addition or developed, check the response code you get for the page request and see what is the numeric code. If it is 200, you get a new copy. If it is 304 then your browser is striking the same content or something in your UI is to preserve the previously loaded document fragment.

  Photos make it easy, Chrome this is grabbing a small page for the first time and with disable cache enabled, and we get the status code 200:

  

  If I keep refreshing with "Disable cache" activated so I keep getting GET/200, copy fees.

  However, delete the "disable cache" to speed things up and the server and the client negotiate and check if she even needs to send you the document (if she thinks she's changed), and if not, of course you GET/304, or "load cache:

  

  Whenever I update I get GET/304, hitting the cache.

  Make sure your requests are GET/200 if you expect not to be cached.

• Change my child dwt.php and the pages update dwt

  Hello

  I need to convert my BPD in php. My site is not that great at the moment so I can manually change the links and extensions on the pages of the child if necessary. How can I convert the model and ensure that it remains attached to the child pages? A test, I used "save under" and saved the model as mytemplate. DWT.php. I edited a region in the template and saved. The child content of the pages is not all update. They don't seem to be attached.

  Thank you very much

  Andrea

  Not so fast. PHP templates are named with the extension php - foo.dwt.php! In this way, if someone downloads the template, and someone else is smart enough to try to download it, the PHP gets removed by the server before it is transferred to the "intruders".

  @A.Cambria - this is how to do what you want:

  Method 1

  * apply the model of php for each page of the child (this could be a bit messy in execution

  Method 2

  * create a new page from the php template and copy and paste the content of each page of the child. Then save the new page with the old page file name

  Method 3

  * with all THE closed pages, do a find and replace to "filename.dwt" and replace by "filename.dwt.php".

  * After you have done this, open the model of php, make a negligible change and then reverse the trend and save the page - who must collect all the child pages.

  Method 3 is the best method (make sure that all pages are closed).

• Replace all elements of master page with Applescript

  I did a production script to convert all text in InDesign to outlines.

  Tell application "Adobe InDesign CS5.5"

  tell the active document

  tell each page

  tell each text block to create outlines

  tell the end

  tell the end

  tell the end

  In the documents that I have the conversion, many of the type is defined in master pages, if I want to add a command in the script that replaces all master page items before converting vectorised text, but I'm not find this command in the dictionary. Does anyone know how to do this with Applescript?

  The substitution command would be a good starting point. Try something like:

  say application "Adobe InDesign CS5.

  say document 1

  Repeat with I 1 to the number of pages

  override (each element of the master page of the page elements I which leave substitutes is true) destination page page I

  end Repeat

  end say

  end say

  
  

• Inbox subject lines and the page any sort of small to read.

  Have been a user of Thunderbird for several years a new pc has seen the size of cover page, Inbox and the way a lot of kids to read the modified fonts but good for mail. Not very computer savvy, but frustrating as very difficult to read from my previous version on my pc that went to heaven. Thank you

  Is a way to extend the size of the font to themes with this addon
  Theme-police-size-changer.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/theme-font-size-changer/?src=SS

  Download and save
  Open TB
  go to tools / addons
  in the drop-down list of the equipment-symbol select: install file
  find your saved file and install

• I am connected and the page knows but he won't let me. Œuvres IE9.

  I connected the site of Adobe since Dreamweaver CS5.5. The site recognized me and posted my name on the page. However, he showed not the welcome bar where users like me can make posts. See http://forums.adobe.com/community/gen.../forum_comments?view=discussions & start = 0. The bar should appear just below the black box on the left, with an avatar of the User Forums.

  After contacting Adobe customer service I just tried in Google Chrome and IE9 without any problem. The url entered a new page in Firefox with the same result - no access.

  So I thought that I would ask you on how to fix this.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How to reorganize the POV and the Page dimensions in a data form?

  version 11.1.2.3

  I have built my forms of data but want to rearrange the dimensions within the page selection while keeping my choices.  I can't drag and drop, right click and move up or change the section.  I can move upward members individual in a dimensions however for the page, but not the dimensions themselves.

  You can drag a dimension out of the section POV or PAGE (in another section) and bring her back.  It will be added at the end.  Drag in and out of dimensions until you have the desired order.

  Hope this helps,

  -Jake