Reduce memory Oracle settings?

Similar Questions

• How to reduce memory cache macbook

  I used MacBook Pro (13 inch, mid-2012), OS Yosmite

  in the activity monitor, 4, 67GB cache memory. is this normal? If this is not the case, how can I reduce the memory for the Cache?

  Thank you

  If memory pressure is green, even 100% memory usage is as it should be.  Most recent OSX features memory usage controls involving the unused memory is wasted.

  Worry when the memory pressure is yellow and red.

• How to reduce the Oracle ADF deployed Mobile

  Hello

  I created simple demonstrations with Oracle ADF Mobile and the deployment file is more than 50 MB. Is there a way to reduce this size? Maybe remove some features unused llike SQLLite?

  At the moment you can't do much. Oracle is working on that. With one of the next versions the size will reduce if all goes well.  If you create the application without debugging information, the size is smaller.

  Timo

• The Windows experience index error how to fix (invalid memory access settings)

  I perform index windows as usual and at the end it stops giving me an error and I guess a few months ago it was working fine.
  It stops when the memory test near the end gives the error: impossible to properly assess the disc. The parameter is incorrect.
  If anyone knows what it means and how to fix it please REPLY
  Windows 7 Edition home premium
  AMD athlon 64 x 2 dual core 4600 + 2.40 ghz processcer
  4g RAM
  32 bit
  HP Pavilion

  Hello karimer7,

  Thanks for the return of the response.  Please check the various points listed in the thread below.  There are different options that work for some and not for others.

  Error Windows Experience Index "impossible to properly assess the disc. The parameter is incorrect ".

  Please let us know status.

  Thank you

  James

• Oracle RAC 12.1.0.2 (GI battery) deployment on OEL 7 (3.8.13 - 35.3.4.el7uek) fails with ORA-27102

  Hi guys,.

  I am currently trying to deploy a complete installation (GI battery) of Oracle RAC 12.1.0.2 cool on OEL 7 (3.8.13 - 35.3.4.el7uek) with 2 nodes for validation purposes. However the installation itself went well, but 'Creation repository for Oracle Grid Infrastructure Management container' step fails with "ORA-01034: ORACLE not available / ORA-27102: out of memory / Linux-x86_64 error: 12: cannot allocate memory". The steps of runInstaller validation completed successfully, but I never take this step of configuration without jumping.

  Here is my configuration which should normally avoid such errors ORA.

  Host

  -bash - $4.2 uname - a

  Linux OELRAC1 3.8.13 - 35.3.4.el7uek.x86_64 #2 SMP Tue Jul 29 23:24:14 CDT 2014 x86_64 x86_64 x86_64 GNU/Linux

  "Creation of repository database for Oracle Grid Infrastructure Management container" error in /oracle/base/cfgtoollogs/dbca/_mgmtdb/trace.log

  From restoration to August 9, 14

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 12 type of device = DISK

  channel ORA_DISK_1: from the restore backup set data file

  channel ORA_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_DISK_1: restore datafile 00003 to + GRID

  channel ORA_DISK_1: backup /oracle/grid/12102/assistants/dbca/templates/MGMTSeed_Database.dfb piece reading

  channel ORA_DISK_1: ORA-19870: error when restoring the backup /oracle/grid/12102/assistants/dbca/templates/MGMTSeed_Database.dfb piece

  ORA-19504: could not create the file "+ GRID.

  ORA-17502: ksfdcre:4 cannot create the file + GRID

  ORA-15001: diskgroup 'GRID' does not exist or is not mounted

  ORA-01034: ORACLE not available

  ORA-27102: out of memory

  Linux-x86_64 error: 12: cannot allocate memory

  Additional information: 2663

  Additional information: 1565392897

  Additional information: 161480704

  switch to the previous backup

  Number of folder of the data file = 3 name = + GRID

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the restore command at 09/08/2014 19:41:47

  ORA-01119: error in creating file of database "+ GRID.

  ORA-17502: ksfdcre:4 cannot create the file + GRID

  ORA-15001: diskgroup 'GRID' does not exist or is not mounted

  ORA-01034: ORACLE not available

  ORA-27102: out of memory

  Linux-x86_64 error: 12: cannot allocate memory

  Additional information: 2663

  Additional information: 1565392897

  Additional information: 1614807040

  RMAN-06956: create the data file failed; try again after removing + OS GRID

  SHM / CPI (check the id of shm with previous information)

  -bash - $4.2 ipcs - a

  -Shared memory segments-

  key shmid owner perms bytes nattch status

  1565360128 0 x 00000000 grid 640 4096 0

  1565392897 0 x 00000000 grid 640 4096 0

  0xfba47600 1565425666 640 24576 29 grid

  Memory of the ASM instance setting

  SQL > see the memory settings

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  whole big memory_max_target 1076M

  whole large memory_target 1076M

  ASM disk groups

  SQL > select NAME, STATE, TOTAL_MB, USABLE_FILE_MB from v$ asm_diskgroup;

  NAME STATE TOTAL_MB USABLE_FILE_MB

  ------------------------------ ----------- ---------- --------------

  RACK MOUNTED 6144 4868

  / dev/shm to memory_target (more than enough free space)

  -bash - $4.2 df-h

  Size of filesystem used Avail use % mounted on

  tmpfs, 630M 2.4 G 3.0 G 21% / dev/shm

  Kernel for SHM limits set to unlimited parameter

  -bash - $4.2 sysctl - a | grep shm

  kernel.shmall = 1152921504606846720

  kernel.shmmax = 922337203685477580

  User limits on unlimited for memory

  -bash-4, $ 2 cat /etc/security/limits.conf

  # Oracle settings

  grid soft nproc 2047

  grid hard nproc 16384

  grid soft nofile 1024

  grid hard nofile 65536

  Oracle nproc 2047 soft

  Oracle nproc 16384 hard

  Oracle soft nofile 1024

  Oracle hard nofile 65536

  * hard memlock unlimited

  * soft memlock unlimited

  -bash - 4, $ 2 known - grid

  -bash - $4.2 ulimit - a

  the file size (blocks, - c) of base 0

  (kbytes, - d) data seg size unlimited

  scheduling priority (-e) 0

  size of the file (blocks, f) - unlimited

  pending signals (-i) 23953

  Max locked memory (kbytes, - l) unlimited

  size of the memory (k, m) max - unlimited

  open files (-n) 1024

  a size (512 bytes, - p) 8 hose

  (Bytes, - q) POSIX message queues 819200

  real-time priority (-r) 0

  size (Ko, - s) 8192 battery

  time processor (seconds,-t) unlimited

  Max user process (-u) 2047

  virtual memory (KB), - v) unlimited

  the locks on files (-x) unlimited

  So what the hell is wrong here? Why the instance ASM (+ ASM1) returns the error below, even if there is no memory limit / problem. The error with the disk group is also absolutely no sense.

  ------------------------------------------------------------------------------------------------------------------------

  ORA-01119: error in creating file of database "+ GRID.

  ORA-17502: ksfdcre:4 cannot create the file + GRID

  ORA-15001: diskgroup 'GRID' does not exist or is not mounted

  ORA-01034: ORACLE not available

  ORA-27102: out of memory

  Linux-x86_64 error: 12: cannot allocate memory

  Additional information: 2663

  Additional information: 1565392897

  Additional information: 1614807040

  ------------------------------------------------------------------------------------------------------------------------

  Someone at - he encounter the same problem with 12.1.0.2 by deploying the CDB for Grid Infrastructure Management repository? Is there something special with UEK3 (3.8.13 - 35.3.4.el7uek) on 7 OEL? Any necessary special kernel parameter (although the runInstaller controls do not mention)? I'm totally tapped by GI 12.1.0.2.

  Thank you.

  Best regards

  Stefan

  Hi guys,.

  I was finally able to solve this problem.

  She was related to a memory on the provisioning of problem in the virtual environment as both nodes are VMs. Unfortunately none of these errors of memory were populated / pushed somehow in the virtual machine.

  Best regards

  Stefan

• Oracle error creating file pfile

  SQL > startup nomount pfile='D:\ORACLE\product\11.1.0\db_1\database\initbbcomstage.ora';
  ORA-27102: out of memory
  OSD-00026: additional error information
  S/O-error: (OS 1455) the pagefile is too small for this operation ends.

  845470 wrote:
  SQL > startup nomount pfile='D:\ORACLE\product\11.1.0\db_1\database\initbbcomstage.ora';
  ORA-27102: out of memory
  OSD-00026: additional error information
  S/O-error: (OS 1455) the pagefile is too small for this operation ends.

  Using MEMORY_TARGET or SGA TARGET?
  What is your memory of the host and how you have configured for the Oracle Instance?
  Reduce memory(SGA/Memory) & try again

• Compaq 500 b memory and CPU compatibility problem

  I have a Compaq 500 b MT, that came from the factory with 1 GB of RAM and a processor Intel Celeron E3200 CPU.  I upgraded my memory to two sticks of 2 GB Kingston DDR3 1600 RAM, which worked perfectly for a while.  I then upgraded my CPU to an Intel Pentium E6500 CPU processor (supported), and when the start he gave me a code beep RAM (1 short, 1 long, 3 second pause) error.  I bought 2 sticks of memory PNY thinking I have fried my other sticks.  Same beep code.

  To make a long story short, I tried all possible combinations of the two processors and the three types of memory. The only time wherever I could get the Pentium E6500 to start was with the factory installed 1 GB memory.  It would give errors of memory with any of the other 2 GB sticks, even when considered individually.  Celeron CPU works very well with them.

  Is there something that I need in order to get the E6500 working with sticks of 2 GB of RAM?

  When you updated the modules of memory did you some they are guaranteed compatible? This isn't an amateur PC equipped of a BIOS level that allows for flexibility in the choice of primary and secondary memory sync settings and take. This means that it is essential that one chooses to upgrade memory that meets the criteria specified in the image below. Otherwise, the way the easiest way to upgrade is to buy only compatible memory guaranteed of leading manufacturers of memory.

  

  When I search for Compaq 500 b MT I come with a desktop PC. Is this correct? You posted in the notebook section, perhaps by mistake. If you will check, I can move this correct place.

  Kind regards

  ERICO

• Reduce the Overdrive (ghosting) by using the Menu of Service, GN246HL

  I would like to have access to the service menu so I can reduce my overdrive settings to correct the overshoot. This has been requested for years, turn on Acer!

  

  Found the service menu but not option

• For 2 months to get a pop up that says windows virtual memory and windows is fixing prob... How long should it take? and I don't get much store anything on my computer so how if memory can be low? __

  I used the disk defragment and free of unused programs

  Two months! This error message occurs most often on severely infected computers or on computers where the end-user has changed pagefile settings. Have you changed the virtual memory management settings?

  Start with the basics and make sure that the computer is free of viruses/malware:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

• HP Probook 440 2 How to change the BIOS to work around the memory not supported the start-up message

  Hi everyone, first I would like to say that I find the list of operating system for the less "interesting".

  Now, I bought a G2 to replace my 4441S.

  The problem is that the momory I had gave me a message as "memory not supported."

  very well, I bought new memory, same problem with 2 brands, so I it's maybe because I bought 'normal' memory and not DDR3l?

  The thing is that I need this memory quickly and I can't find DDR3L, now I use corsair Vengeance and I need more on the lan function but this message that allow me to use the computer if I press on enter, have no countdown with option by default and no BIOS settings so I want to change that and either add a timeout that starts the laptop or just disable this message , because it works, I use it now.

  I need that until I can find the DDR3L.

  Thank you.

  You don't seem to understand how it works with primary and secondary memory voltage settings schedule and bus. the laptop BIOS ROM file includes settings in its encoding of the memory modules that meet the compatibility requirements. If you install memory that has not been tested for compatibility, so it will not work or even it seems to work, it will be unstable.

  A BIOS of the laptop is quite unlike a BIOS that is present in a motherboard level amateur games. There are no timings adjustable and tensions to the timings of the memory or bus in a laptop BIOS BIOS standard voltages. It actually is to protect the owners from themselves.  You "do not 1.5 and 1.35. You can't change the setting of the voltage on the bus to do anything other than what is defined in the BIOS. If you install the module memory does not accept the voltage set by the BIOS code, then you are simply out of luck.

  Check out the BIOS Modding forums if you want to see what options may be made available.

• Cannot allocate 0.002 MB memory... I have 32 GB of RAM

  Hi all

  I've upgraded to the new version of After Effects 11/30 and I always get this message:

  Cannot allocate 0.002 MB memory reduce memory for rendering of this framework requirements, or install more RAM. (12803 3D camera data / standard). For more information, see www.adobe.com/go/learn_ae_mem (5027: 3)

  When I purge the cache of the memory and the disk is not much except change the error to a (0: 39) or (7: 5)

  I went to the quarter to frame (10 x 15) custom resolution...

  I have 32 GB of RAM and After Effects use 20-29 gb as seen on my application for management tasks on El Capitan.

  It was produced after about 30 minutes of use with no problems. So if I saw my composition I get all these error messages continue to appear after I press ok making it difficult to work on my project. Finally, I restart my computer that solves the problem for 15-20 minutes until I need to redo a reboot.

  For now, the only solution I've come across uses an older version of AE. It bothers me that this happens to the newest version that I prefer to work with an adverse event to date...

  Best,

  Danny

  What is the exact version of 2015 for CC number that you use? There is a big difference in performance between 13.5.0 and 13.7.2!

  How you establish previews? You have the cache before reading to checked in your preview? What are the parameters of your memory?

  What version do you use that works correctly? (Full version number to please.)

• Installing multiple oracle.

  Hello Experts,

  I installed oracle 10.2 on oel5.8. Now, I want to install oracle 10.2 on the same system using different oracle home. My request is that I should change.

  as

  1. in .bash_profile file input current is

  ============================================================

  # Oracle settings

  TMP = / tmp; Export TMP

  TMPDIR = $TMP; export TMPDIR

  ORACLE_BASE = / u01/app/oracle; export ORACLE_BASE

  ORACLE_HOME=$ORACLE_BASE/product/10.2.0/Db_1; Export ORACLE_HOME

  ORACLE_SID = TSH1; export ORACLE_SID

  ORACLE_TERM = xterm; export ORACLE_TERM

  PATH = / usr/sbin: $PATH; export PATH

  PATH = $ORACLE_HOME/bin: $PATH; export PATH

  LD_LIBRARY_PATH = $ORACLE_HOME/lib: / lib: / usr/lib. export LD_LIBRARY_PATH

  CLASSPATH = $ORACLE_HOME/JRE: $ORACLE_HOME/jlib: $ORACLE_HOME/rdbms/jlib. Export CLASSPATH

  If [$USER = 'oracle']; then

  If [$SHELL = "/ bin/ksh"]; then

  Pei 16384 ulimit

  ulimit-n 65536

  on the other

  ulimit-u 16384-n 65536

  FI

  FI

  ===============================================================

  2. what will be the status of the oracle inventory after the installation.

  3. How can I make sure that these tow are not conflict.

  Help, please.

  Do not change the bash profile entry. Just install the oracle home. The caution that you need to do is that both the software must have different oracle home (if you use the same directory for both the software). Connect to oracle home you will need to export ORACLE_HOME, PATH and ORACLE_SID.

• Installation and migration Oracle 10 g x 86 to x 64 under SUSE 11 x 64

  Hi all

  I'm trying to accomplish a proof-of-concept for the migration of legacy x 86 environment running Oracle 10 g in x 64 environment, then upgrade the instance of Oracle 11 g. The first step in doing this is installation of Oracle 10 g in the target environment, which is SLES 11 SP2.

  I went though the standard installation procedure; from what I can discern, I installed all dependent packages, including orarun to prepare the environment. I have a source installation package after some minor headaches (unfortunate that Oracle offers them more, because I'm sure there are others out there pertaining to similar projects) and began the process of installation as the oracle user.

  To install, I chose to keep things as simple as possible and went with all the default Oracle settings, although I chose to not create a starter database. The only difference is that I have in the House/storage of database mapped via iSCSI to/opt/oracle/product /. After editing, I was sure to change the property of oracle: oinstall.

  The first phase of the installation runs without problem. I made the necessary changes to the system so that Setup happily buzzes through the prerequisites and ends the first phase of the installation. However, during the phase of liaison, I meet an error:

  «Error in invoking target 'client_sharedlib' of makefile ' / opt/oracle/product/10gR2/db/network/lib/ins_net_client.mk'.» See < journal > for more details".

  In this paper, I am directed to examine the Journal brand, as in

  "INFO: the output of this operation is also available to: ' / opt/oracle/product/10gR2/db/install/make.log'.

  Very well. So, here is the relevant excerpt from that:

  32-bit version of nnfgt.o building

  / bin/sh: line 2: / opt/oracle/product/10 g 2/db/bin/gennfgt: permission denied

  r /opt/oracle/product/10gR2/db/lib32/nnfgt.o

  / bin/sh: line 8: / opt/oracle/product/10 g 2/db/bin/gennfgt: permission denied

  64-bit version of nnfgt.o building

  r /opt/oracle/product/10gR2/db/lib/nnfgt.o

  (if ["compilation" = "assemble"]; then------)

  / opt/oracle/product/10 g 2/DB/bin/gennfgt > nnfgt.s

  / usr/bin/As o nnfgt.o nnfgt.s

  RM-f /opt/oracle/product/10gR2/db/lib/nnfgt.o

  MV nnfgt.o/opt/oracle/product/10 g 2/db/lib /.

  / usr/bin/AR rv /opt/oracle/product/10gR2/db/lib/libn10.a /opt/oracle/product/10gR2/db/lib/nnfgt.o; FI)

  (if ['compile' = "oratmp"]; then------)

  / opt/oracle/product/10 g 2/DB/bin/gennfgt > nnfgt.c

  / lib/idcpp nnfgt.c oratmp.c

  -i oratmp.c o oratmp.s f nnfgt.c

  / usr/bin/As o nnfgt.o oratmp.s

  RM-f oratmp.c oratmp.s

  RM-f /opt/oracle/product/10gR2/db/lib/nnfgt.o

  MV nnfgt.o/opt/oracle/product/10 g 2/db/lib /.

  / usr/bin/AR rv /opt/oracle/product/10gR2/db/lib/libn10.a /opt/oracle/product/10gR2/db/lib/nnfgt.o; FI)

  (if ['compile' = "binary"]; then------)

  / opt/oracle/product/10 g 2/DB/bin/gennfgt > nnfgt.c

  TARGET_BINARY_INTERFACE =

  export TARGET_BINARY_INTERFACE

  GCC - c nnfgt.c.

  -f /opt/oracle/product/10gR2/db/lib/nnfgt.o rm

  MV - nnfgt.o/opt/oracle/product/10 g 2/db/lib /.

  / usr/bin/AR rv /opt/oracle/product/10gR2/db/lib/libn10.a /opt/oracle/product/10gR2/db/lib/nnfgt.o; DIK

  / usr/bin/make-f ins_net_client.mk client_sharedlib ORACLE_HOME = / opt/oracle/product/10 g 2/db / / opt/oracle/product/10 g 2/db/bin/genclntsh

  make: execvp: / opt/oracle/product/10 g 2/db/bin/genclntsh: permission denied

  make: * [client_sharedlib] error 127

  I don't know what to do with these permissions problems:

  ls - al/opt/oracle/product/10 g 2/db/bin/gennfgt

  -rwxr-xr-x 1 oracle oinstall 2983 20 October 2005/opt/oracle/product/10 g 2/db/bin/gennfgt

  Additional information, as I thought the ORACLE_HOME in the output was weird (concatenated?):

  echo $ORACLE_HOME

  / opt/oracle/product/10 g 2/DB

  This who might I be missing here? Any help is greatly appreciated, let me know if there is anything I can provide additional details.

  See you soon,.

  Greg

  Another thing, you might check are property of oracle on all directories in/opt/oracle/product/10 g 2/db and the correct permissions. Also, what is your output of the command 'mount '?

• Questions about the installation of Oracle 11 g

  Hi all
  
  I would like to install Oracle database 11g (standalone) on a Linux (RHEL5) shortly... I have done everything to stepped times but this time, I have the following requirements...
  
  (1) TNS_ADMIN environment must NOT be the ordinary $ORACLE_HOME/network/admin... It should be outside the ORACLE_HOME, ORACLE_BASE/something like/special_tns/network/admin /... Is this can be achieved by simply setting the TNS_ADMIN environment variable to point to the default location not before installing the software...? I don't think that there is even an option NETCA to specify a value default no TNS_ADMIN environment...
  
  
  (2) ORACLE_ADMIN environment (IE... bdump, cdump, udump etc.) should NOT be under $ORACLE_HOME... It should be directly under $ORACLE_BASE.
  
  
  Any ideas on how #1 & #2 could be applied?
  
  
  Thanks for your time...

  Hello;

  Of course, to install only the software and then, when you create the database using a file parameter with these changed according to needs.

  background_dump_dest
  audit_file_dest
  core_dump_dest
  user_dump_dest

  BACKGROUND_DUMP_DEST = {path: directory}
  AUDIT_FILE_DEST = "directory".
  CORE_DUMP_DEST = rΘpertoire
  User_dump_dest = {path: directory}

  You should be able to set TNS_ADMIN in your operating system profile.

  E.g.

  # User specific aliases and functions
  # Oracle Settings
  TMP=/tmp; export TMP
  TMPDIR=$TMP; export TMPDIR
  
  export ORACLE_BASE=/u01/app/oracle
  export ORACLE_HOME=/u01/app/oracle/product/11.2.0
  #export DISPLAY=localhost:0.0
  export TZ=CST6CDT
  export ORACLE_SID=TEST
  export ORACLE_TERM=xterm
  export TNS_ADMIN= Set if sqlnet.ora, tnsnames.ora, etc. are not in $ORACLE_HOME/network/admin
  
  export NLS_LANG=AMERICAN;
  
  LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
  LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
  export LD_LIBRARY_PATH
  
  # Set shell search paths
  
  PATH=/usr/sbin:$PATH; export PATH
  export PATH=$PATH:$ORACLE_HOME/bin
  
  # CLASSPATH:
  CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
  CLASSPATH=$CLASSPATH:$ORACLE_HOME/network/jlib
  export EDITOR=vi
  set -o vi
  PS1='$PWD:$ORACLE_SID >'
  

  Best regards

  mseberg

• Oracle user does not pick up environment (variables &amp; c.)

  Hi all
  
  Installed 10 XE on my machine that created an oracle user and dba
  Group as expected.
  
  When I do
  
  Su - oracle
  
  I find myself in the oracle user's home directory
  
  / usr/lib/Oracle/XE
  
  with a bash shell. So, I create .bashrc I set ORACLE_HOME, JAVA_HOME and c.
  
  However, my user is still not picking up his (its?) variables.
  
  Can someone explain to me how to get the oracle user has an appropriate default value
  environment - TIA.
  
  
  Paul...

  Salvation;

  Go to the home directory of the user and change the.profile(aix,solaris) .bash_profile (linux) and reconnection system it should work

  You can turn down enteries

  # Oracle settings
  TMP = / tmp; Export TMP
  TMPDIR = $TMP; export TMPDIR

  ORACLE_BASE = / u01/app/oracle; export ORACLE_BASE
  ORACLE_HOME=$ORACLE_BASE/product/10.1.0/Db_1; Export ORACLE_HOME
  ORACLE_SID = TSH1; export ORACLE_SID
  ORACLE_TERM = xterm; export ORACLE_TERM
  PATH = / usr/sbin: $PATH; export PATH
  PATH = $ORACLE_HOME/bin: $PATH; export PATH

  LD_LIBRARY_PATH = $ORACLE_HOME/lib: / lib: / usr/lib. export LD_LIBRARY_PATH
  CLASSPATH = $ORACLE_HOME/JRE: $ORACLE_HOME/jlib: $ORACLE_HOME/rdbms/jlib. Export CLASSPATH

  Source:
  http://www.Oracle-base.com/articles/10G/OracleDB10gInstallationOnFedora2.php

  Respect of
  HELIOS