Reduce the length of the array without resetting the table
An application for review of experience, I would like to use a table for the entry of the experimenter. The experimenter type in the values they choose, usually less than ten years, and the LabView program to use each value based on the size of the array. All is good on any other installation requiring more values and the initial installation, the table will grow well. The following configuration should require fewer values that table continues to impose values for diversity is entered until the table is initialized on start. A reset button resets the table obviously but requires an additional control, training of users and frustration when forgotten and values entered before resetting. Is it possible, for example to remove surplus values, to reduce the size of the array?
Moreover, can the tab or enter key to move between the values in the table?
Try this. I don't have time to clean it up right now.
Tags: NI Software
Similar Questions
-
impact of production if I reduce space on the table...
Hello experts.
I am running Oracle 11.2 and seen in OEM I have a table that is candidate to shrink the space.
According to OEM, I can gain 5 G by the decrease in the table.
The table is 16G, so if I reduce the table, then it should reduce about 11 g, right?
This table is the primary table used by our application, impact on production is very important.
Good, then I wonder what is the impact of production on the table while I shrink space on the table.
I'll test now in my test environment.
First of all, I found that I had a function based index to be deleted until I can reduce the table.
So I ran dbms_metadata for syntax to recreate the FBI, then dropped the FBI.
Then I ran change movement line of table owner.tablename enable;
Then I ran alter table shrink space cascade owner.tablename;
While I'm under the table command shrink, I opened another session and I asked the table and even made some updates on the table.
I was very surprised that the table is not locked and is always accessible for update and select statements.
In fact, I don't see any noticeable impact of the retractable table command.
Obviously, I'm not in the production environment with hundreds of simultaneous users, but my question is what kind of impact should I expect see if I have it in production with people hitting this table? (No, this isn't an IOT.)
Any ideas?
Published by: 974632 on February 19, 2013 05:54
NOTE: The command table shrink took: passed: 00:43:17.19
Re-create the function based index took: passed: 00:00:28.80No, the shrinkage is invalid index.
This means that when you use the CASCADE option, index will be narrowed as much too. When you use shrink, you use the clause 'movement of table XXXX line activate edit' which can cause invalid objects such as triggers or procedures related to the XXXX table.
Also, if you issue the following statement "alter tableenable/disable row movement;" it will invalidate any stored procedure that references that table. But, once you reference that invalid stored procedure, Oracle recompiles it
from: http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:35203106066718
- Hello group,
To reduce the size of a table, that I was asked to remove about 2 million lines, however queriying dba_segments after having removed the lines, the value of the BYTES column to the same value stay.
Why?, how ask Oracle to reduce the table itself.
Thank you very much.user12003066 wrote:
Hello group,To reduce the size of a table, that I was asked to remove about 2 million lines, however queriying dba_segments after having removed the lines, the value of the BYTES column to the same value stay.
Why?, how ask Oracle to reduce the table itself.
What happens when you run this?
exec dbms_stats.gather_table_stats ('schema', 'your_table_name');
Aman...
I use Mac OS 10.6.8.
When I access my webmail via Firefox, I get a Twitter hard whenever I have send or receive a new email.
I contacted my ISP (Optimum) and they said tell Firefox to my computer to make the sound. They say that they have no control over it.
I tried to reduce the volume of alerts in my system prefs, but it has not affected the volume of FF.How reduce or disable volume in FF when using webmail without lowering system volume?
Thank you!!! The 'sound' button off in their preferences. Fixed. (It was so freakin ' fort!)
I, in turn, chatted with Service to customer of Optimum and tells them that they must tell their supervisor to better educate their own service to the customer, instead of passing the ball. We'll see.
Let contributors Mozilla smart to not return the ball.
Re: Can I repair the operating system without resetting the whole HARD drive?
I have a Toshiba Satellite M50, I ran an antivirus in safe mode scan today and must have accidentally deleted a file system because now I can not connect.
The computer will start but when I try to log in it connect, flash back, my office to the floor once and then connect again.
I can repair the operating system without resetting the entire hard drive and lose all my files?And if not, is there someway to initiate a prompt BACK because I don't that the file is still in the recycling bin, and I might be able to restore it.
Hello Bambi
Repair option with the recovery DVD (image recovery) is not available. Using recovery DVDs, you can install OS and have once again the factory settings.
As far as I know at the BACK level, you can start using BACK discus. You can create bootable CDs.You can start your computer in Mode safe?
Remove the array without the local Variable element
I am wanting to know if you can remove an element of an array, the index of the removed part.
and update the value in the array to not include the deleted part of a more direct way than the following:
Or, in my program, the table is initialized with some clues that makes the task of removing an element of
table, the part removed from indexing and updating the table includes only not the deleted part similar to the following:
(a) is there a way to do this without having to use local Variables?
(b) I would be so concerned to rid my program of all local Variables? (even those who don't create race conditions)
Keep the table in a feedback node initialized in the world. Do not imply not objects of façade.
change the size of array without initializing
Hello
I'm trying to dynamically change the table size.
I'm doing a calibration of an instrument and from time to time I read 3 parameters and try to write in an empty array (do not reset) and caclulate interpolation polinom according to my measured data.
The table must be empty because I use the same table as input for the calibration procedure and it may not contain the zero but only the measured values and it will develop that my flow measurement.
I hope that my question is simple,
Kind regards
Sasa
Hello Sasa,
two options come to mind:
(1) use the BuildArray to 'grow' your table of measurement points. Add only "not null" points to the table...
(2) search the forum for discussions on 'remove items from the table', you will find something like this...
Different input data to PXI6733 without resetting the unit
Hello
From the attached VI, I have init. the PXI6733 then it come out 2 samples to 125kHz.
I'm trying to 2samples each loop without resetting the output device. (Please refer to the attached VI)
For example,.
Loop 1, AO:0 = 1V, 3V (Analog devices PXI6733, Analog output channel 0)
Loop 2, AO:0 = 2V, 4V
Loop 3, AO:0 = 3V, 5V
..
..
change from loop to loop data, i.e. data changes dynamically.
And at the same time, I need to 2 analog samples acquired too, using the analog input device, PXI6255.
Because the initialization will take time, I prefer to ignore the initialization steps and release/acquire new data in each loop (2ms).
I have run out of idea and hope any1 here could give me some advice/idea. Your comments are appreciated. Thank you.
Hello Eng Wei,
Attached, is an example that allows you to do exactly what you're trying to do.
What you need to do is to adjust the output level to the output you want. As you can see in the program, there are a few things you might need to change to your application, but the initialization happens outside of the loop and inside, simply by changing the value of exit and entry read.
James
The path of the environment is too long, please reduce the length. Click on 'Retry' after reduction of the duration or click 'Cancel' to exit the application.
http://en.Wikipedia.org/wiki/Environment_variable#System_path_variables
What is the best way to change the elements of the array (without copies of the table)?
Hi all
I am new to Labview, so I'm sorry for the newbie question.
I'm using Labview check parts in an assembly as a precursor to the test. For my 'list' I create an array of clusters, with the cluster containing a string for the part number and a Boolean value if the latter has been analyzed. I read in my parts list, and then I add on behalf of the party to each cluster in the table. I don't want to do multiple table if possible copies. The code below does not work - I've had the 'matrix' (my Checklist) outside the while loop, because I assumed that the box of items inplace should not output. The cluster created in the inplace elements is correct, but the 'picture' does not change.
Any help woud be appreciated, I would have preferred a simpler solution elements inplace if possible (once again without making multiple copies).
Concerning
Ray
You do not show the rest of the code, but I'm guessing that your "matrix" is never initialized with all values. Thus, 'replace' will not work since you can't replace an element that does not exist. If the case you are showing is supposed to be the initialization of the table (and based on what you say, it seems as if this is the case), and then abandon the inplace structure. All you need to do is automatic index of your array of strings and just do this:
Reduce the folders in Windows 7 for photos without causeing with PSE11 problem
I want to simplify my Windows 7 files and reduce the number of files. Can you please advise me on the best way to do so as not to cause problems with PSE11 to find the photos? Thank you.
19441965 wrote:
I want to simplify my Windows 7 files and reduce the number of files. Can you please advise me on the best way to do so as not to cause problems with PSE11 to find the photos? Thank you.
The only way to move files or Folders/subfolders without causing problems, which does not create a 'missing files' is to go to the bosom of the Organizer, not the operating system (Win/Mac).
You can create folders and move images of the Organizer.
Note that if you move the files of several subfolders in one alone, you run the risk of wanting to move files with the same file name in the same folder; your operating system will not allow that. If the Organizer will rename images if necessary.
If you want to do such a task big reorganization, absolutely do a complete backup before. There is no advantage for a reorganization organizing point of view, but if you need it for some reason, it must be done from the Organizer.
How to decrease the size of the PDF file without reducing the quality and links?
How to decrease the size of the PDF file without reducing the quality and links?
Michael and Phil,
Your ability to reduce the file without diminishing its quality depends on the quality required for their intended use. If these are intended for viewing on screen, then high resolution pictures can be re sampled or changing the resolution without real change is the quality, as long as the user can say. Number of files use subsets of fonts or the incorporations of fonts. Sometimes you can remove subsets of fonts or embedding the fonts if the font will be on the user's system. Subsets of fonts can save space, but if the pdf is a result of several different sources, desincorporation policies and incorporating a copy of the policy can save space.
Honestly, the size of 2 MB file is not the problem it once was. However, maybe the pdf not by e-mail at all. There are players on a server as well as a link sent to each user.
How can I reduce the weight of the image without losing too much quality?
Nice day.
I'm still a beginner in using Dreamweaver.
I hope someone can guide me concerning the weight of the image.
The image of the banner currently weighs 1.35 MB (PNG24) - a picture with a logo.
Photography (24 photos on a single page, using the thickbox Gallery) weighs about 1.3 MG each (JPEG images).
Where can I learn how to reduce the weight of
the above PNG image
and
the above JPEG images
without losing too much quality?
I would really appreciate guidance.
There are 3 steps to balance weight (file size) vs image image quality
(1) the dimensions of the image (on the screen height x measured in pixels wide is all that matters). Dimensions more small = reduced file size.
(2) compressed file type (JPEG for photographs, PNG, or GIF for everything else). Choose the file type for your picture.
(3) the final compressed image quality - visually by comparing the final image for the file size final vs 'acceptability' (less artifacts)
There are plenty of tutorials online
http://inobscuro.com/tutorials/read/35/
http://sixrevisions.com/web_design/comprehensive-guide-saving-images-for-Web/
Is there a way to reduce the size of images without doing it in photoshop?
Hi all
I have a document with a ton of images, all of high resolution press ready. I need now this doc to the web, even at low resolution, the pdf file is still 6 MB.
Is there a way to reduce the images in the file for the web without batch processing in photoshop? Just curious.
See you soon
S
You should be able to reduce the size of the PDF file by changing export settings. In the export settings you can flatten transparency (PDF 1.3 can produce a smaller file), convert CMYK to RGB (output > color Conversion), lower quality of resolution and compression (Compression tab).
The issue of reducing the size of textfield and lovfield length.
Hi all,
I created a text and lov field dynamically. But it shows a little big. I want to reduce the length. I used this CSStyle. But it's not working.
Please help me.
CSSStyle style = new CSSStyle();
style.setProperty("Length","5");
ounamebean.setInlineStyle (style);
It is correct or not.
Please guide me.
Thanks in advance
Concerning
FabriceImport oracle.apps.fnd.framework.webui.beans.message.OAMessageLovInputBean;
Import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;Use like this...
OAMessageTextInputBean bean = (OAMessageTextInputBean) webBean.findIndexedChildRecursive ("a");
bean.setShortDesc ();Maybe you are looking for
-
Vertical black line on Portege 3500
My P3500 screen suddenly started showing a vertical black line with interference on the right hand third of the monitor. The line disappears after about 15 minutes, but still the interference. I plugged an external display that shows no display probl
-
Empty message when you reply to an E-mail
I have installed iOS 10.11.3. Since then, whenever I hit the button "answer" mail an empty message appears. No signature block, to the email address in, nothing. does anyone else know this? Is there a solution? A reboot will sometimes solve the probl
-
No one knows how to delete a column, or changing the values in this column and leave the rest in a csv file? Example: CSV file has 70 rows and 40 columns. To remove a column or change its values. Thanks in advance.
-
It seems that DPM 2012r2 with patch 9 is missing from the storage to migrate window up/down scroll bar. It is also absent from the disks/tab management screen. All confirm that they have the same problem?
-
LabVIEW 7.1.1 crash on right-click Subvi
We started to have a problem on a computer, with a 3.4 ghz, card mother dual core to Intel, win XP pro. When a Subvi, usually homemade and started under a previous version of labview, is right click on the scheme, we have a dialog box indicating that
- Hello group,
