Different input data to PXI6733 without resetting the unit

Similar Questions

• How to reset the data counter without resetting the phone

  How to reset the data counter each month so that I can control my data counter with our reset the phone (or) without using factory data reset.

  Thanks for the reply much appreciated.

  Parameters

  Data Manager

  Press the lower left key

  Reset the data counter

• Re: Can I repair the operating system without resetting the whole HARD drive?

  I have a Toshiba Satellite M50, I ran an antivirus in safe mode scan today and must have accidentally deleted a file system because now I can not connect.
  The computer will start but when I try to log in it connect, flash back, my office to the floor once and then connect again.
  I can repair the operating system without resetting the entire hard drive and lose all my files?

  And if not, is there someway to initiate a prompt BACK because I don't that the file is still in the recycling bin, and I might be able to restore it.

  Hello Bambi

  Repair option with the recovery DVD (image recovery) is not available. Using recovery DVDs, you can install OS and have once again the factory settings.
  As far as I know at the BACK level, you can start using BACK discus. You can create bootable CDs.

  You can start your computer in Mode safe?

• My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

  My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

  If she needs your Apple ID password and you have enabled 2-factor authentication, you might have to temporarily disable the connection to complete.

  Also, you need an internet connection to perform this step here.

  If your problem is not of the above, please describe more completely. Furthermore, to give specific messages on the screen.

• Repair without resetting the screen?

  Hello

  I have a DroidX and my screen has been cracked recently when she fell on a tiled floor. I called Motorola and they screen repair but the technician I spoke with informed me that they would have to reset the phone to do this, which would affect my text messages I saved. Normally, it wouldn't be a big deal, but I have several text messages from my father, extending over more than 6 months, which are very valuable for me because he died quite suddenly two weeks ago.

  My question is: is there a way to repair the screen without having to reset the phone? I'm ready to buy a screen repair kit and give it a go myself to try to save these messages. They are the only things I have left of my father.

  Thanks in advance for any help you can offer me.

  Sorry to hear about your father. You have my condolences as well.

  In regards to your text messages, search the Android market, I think that it apps that can save your text messages and other information in case you need to factory reset your phone.

• Can I add a data store that already has data on it without destroying the data?

  I test different stratagems of DR and a scenario uses the ability of a SAN to snap_clone a vDisk, I will here mention sellers , then present the vDisk magnetized to the members of the cluster.  I know I can present this back to a host as a different disk/lun, but not sure how or if I can get a host to a point where I can navigate the data store and retrieve, for example, a single virtual machine.  Does anyone have experience or ideas around that?

  Thanks in advance,

  If I understand your question, you want to see a component data store snap-in (at the level of storage)?

  In this case, that you must use DisallowSnapshotLUN = 0

  http://www.yellow-bricks.com/2008/12/11/EnableResignature-andor-disallowsnapshotlun/

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Reduce the length of the array without resetting the table

  An application for review of experience, I would like to use a table for the entry of the experimenter.  The experimenter type in the values they choose, usually less than ten years, and the LabView program to use each value based on the size of the array.  All is good on any other installation requiring more values and the initial installation, the table will grow well.  The following configuration should require fewer values that table continues to impose values for diversity is entered until the table is initialized on start.  A reset button resets the table obviously but requires an additional control, training of users and frustration when forgotten and values entered before resetting.  Is it possible, for example to remove surplus values, to reduce the size of the array?

  Moreover, can the tab or enter key to move between the values in the table?

  Try this. I don't have time to clean it up right now.

• I can't log out of my account from microsoft on my windows phone without resetting the phone

  My microsoft email account (live.com) is somehow on my moms phone windows. It will not change the email address (I can't access is no longer) he asks just the password and I have no idea what it was. We do not want to reset the phone and lose all its information, please help!

  Hi Laurent,.

  What is the model number of the Windows Phone?

  What version of Windows is installed on the phone?

  I suggest you to refer to the links and check if it helps.

  https://support.Microsoft.com/en-us/KB/2432933

  http://www.windowsphone.com/en-in/how-to/wp8/email-and-calendar/set-up-or-delete-an-email-account

  Thank you.

• Is it possible to restore default color settings without resetting the preferences?

  Running InDesign CS6 and I accidentally changed the color settings (long story). Now every document I open past that comes with a profile mismatch warning.

  I would like to reset my color setting by default (with all my materials online), but I can't find anywhere on the web, what should be the original settings.

  Help, please.

  (PS - I currently get the warning for RGB and CMYK)

  Out of the box, to the United States, it would be General 2 goal in North America, which is not, in my opinion, a good choice for anything.

• How can disable switch between different input languages (= keyboard languages) by pressing the Alt + Shift keys? __

  Although I can now perform steps

  1. On the start menu, choose Control Panel.

  2. In Control Panel, select regional and Language Options.

  3. In the Regional And Language Options dialog box tab, under Text Services and input languages, click details.

  4. In the text Services and input, in the Preferences section languages, dialog box click on the key parameters.

  5. In the dialog box advanced key settings, click Change Key Sequence.

  6. In the change Key Sequence dialog box, clear the switch input languages check box, and click OK.

  7. In the advanced key settings dialog box, click OK.

  8. In the text Services and input languages dialog box, click OK.

  9. In the Regional And Language Options dialog box, click OK.

     But I need some settings registry keys to do the trick above to me, because it is difficult to do it on the number of PCs that requires users to restrict the swith between input languages.
     No idea or help is greatly appreciated.

     Thank you in advance.

  Hello
  I found the place where exactly this may be small :).

  [HKEY_CURRENT_USER\Keyboard Layout\Toggle]
  "Hotkey" = "1".
  'Language Hotkey' = '3 '.
  'Shortcut page layout' = '2 '.

  Change the value of "Language Hotkey" accordingly.

  1 sequence of button enabled; Use Left ALT + SHIFT to switch between locales.
  2 key activated sequence; Use CTRL + SHIFT to switch between locales.
  3 invalid key sequences.
  4 If the default locale is Thai, the grave accent key activates / deactivates the input locale. otherwise the keystrokes are disabled.

  Another problem is that it sits under HKCU as well, same as if I pack this setting with MSI, it won't have a any use to me. Since then, installation is done using MSI localadmin account and HKCU is associated with the current session. If a new user who connects to this settting does not apply, and even if it rises "access denied" :(

  Hope this helps anyone with the same problem.
  Thank you.

• Page reset without resetting the page header and body

  Hello
  
  I'm going to need like this
  
  I have two columns of page number in the report, we're at the head of the and one is the body of the model.
  
  First page number is the head - what is the total number of pages in the entire report as think page 1/5, I want to say to the header of the report a total of 5 pages.
  
  In the body of the report, I have one more page number column is for this special section as long as my report should be repeated for each Member.
  
  1 member out of page 1 - so the Agency fo rthat Member will have 1/1
  2nd member 2 pages - the body, I'll have 2/2 and 1/2 on the first page of that Member in the second page.
  3rd Member has 2 pages - the body, I'll have 2/2 and 1/2 on the first page of that Member in the second page.
  
  and as I said before to the level of the header, I 1/5.2/5.3/5.4/5.5/5 my total report is 5 pages.
  
  Can someone help me please how to do this.
  
  Thanks in advance
  
  Published by: Verdier on November 18, 2011 11:58

  I sent the updated file, please check.

• BlackBerry smartphone how to remove my Torch 9800 IT strategy, or how to reset the unit to the factory settings

  
  

  See the article in the Knowledge Base RIM here for more information about how to remove an it strategy. See method 3 in the link:

  KB14202 How to remove a policy from IT to a BlackBerry smartphone

  Read this article from RIM's Knowledge Base to reset your device to factory settings.
  KB18998 How to reset a factory default BlackBerry smartphone

• The "Date added" on every song (files) has been reset to an incorrect date. Can I get the correct dates?

  MBP Retna 10.11.02 ~ iTunes 12.3.2.35

  The "Date added" on all the songs (records) have been restored to the wrong date. Is it possible to recover the correct date?

  Turingtest2 CSA user help document: empty/corrupted iTunes after upgrade/crash library - https://discussions.apple.com/docs/DOC-6561

  If you do not see your content after updating to iTunes - https://support.apple.com/kb/HT203225

  If the above methods are too extreme for you, then no, there is not any way to edit "date added" unless you reset the clock of the computer to an earlier date and add the tracks for a new library.

• Input data for digital indicator tab does not exist

  Hello

  I'm trying to define the range of data for the numerical indicators on LabVIEW 10.0.1. For some reason when I go into the properties of my digital indicator, there is no input data tab as explained on the Web site of NOR: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/changing_data_ranges_of_nu/. In addition, in the tab data type, there is a section for the range, but everything is gray. Any help is appreciated. Thank you

  Dig up a very, very old manual (1996!) isn't all that productive. If you want to restrict the output, just use the function in the range and force.

• Time increasing while sending data via http repeatedly on the storm

  Hi all!

  My application sends data (in general, this is a picture of ~ 1200 Kb) to the server via http.

  The data are sent ok, but the when I send data several times (without leaving the application) the time devoted to writing the data in the outputStream develops. On first use, it takes usually ~ 50 seconds, the second seconds of ~ 70, the third seconds from ~ 100... I see this problem only on the storm, others (Curve 8900, Bold, Tour) are OK. The url is used on Storm is: http://xxxxxxxxxxxxx.com/mobile/mobile.asmx;deviceside=true

  Here is the code snippet:

  private static WSResponse send(byte[] xmlBytes, WSResponseParser parser) throws Exception {
  
          HttpConnection connection = null;
      OutputStream outputStream = null;
  
         try {
              connection = (HttpConnection)Connector.open(WifiChecker.getURL(URL), Connector.READ_WRITE, true);
  
              connection.setRequestMethod(HttpConnection.POST);
              connection.setRequestProperty("Content-Type", CONTENT_TYPE);
              connection.setRequestProperty("Content-Length", String.valueOf(xmlBytes.length));
  
              outputStream = connection.openOutputStream();
  
              int offset = 0;
              int chunk = DATA_CHUNK_SIZE; // 1024
              int len = xmlBytes.length;
              while (offset < len) {
                  if (offset + chunk >= len) { // avoiding OutOfBounds Exception
                      chunk = len - offset;
                  }
                  outputStream.write(xmlBytes, offset, chunk);
                  offset += chunk;
              }
  
              xmlBytes = null;
  
              String response = getResponseAsSting(connection);
  
              WSResponse wsResponse = null;
              try {
                  wsResponse = parser.getWSResponse(response);
              } catch (Exception e) {
                  throw ApplicationException.invalidWsResponse();
           }
  
              if (!wsResponse.isSuccess()) {
                  throw new WSFailureException(wsResponse);
              }
  
              return wsResponse;
  
          } finally {
              IOUtils.safelyCloseStream(outputStream);
              IOUtils.safelyCloseStream(connection);
              if (xmlBytes != null) {
                  xmlBytes = null; // notify VM it can safely free the RAM
              }
          }
  

  I thought it may be a memory problem, so I manually cancel xmlBytes, but which does not solve the problem.

  Any ideas?

  Thanks in advance,

  Arhimed

  P. S.

  There is no question about Simulator, only on a real device of the storm.

  MSohm, thanks for your response.

  Fortunately, I have just fixed the problem. The problem was not in the code above, but in the code that made the xmlBytes. I converted bytes of the image base64 and looks like I did it dangerously on the use of the memory.

  Thanks again for your attention to this thread!