Refer a friend generates a ton of Spam

Similar Questions

• RFSG - generate Dual Tone Modulation with narrow frequency

  Junk

  This message has been a supplement... refer to RFSG - generate Dual Tone Modulation for correct display

• We began to receive tons of spam messages that have empty "from" or "sender" field and we can't seem to get the Message filters to trigger on the empty fields.

  I am trying to create a filter that will remove messages that pass through any information in the FROM or SENDER fields.

  I tried: 'contains + [EMPTY]' and ' sender contains ++ [EMPTY] "(where [WHITE] is leave this field empty), and it does not work.

  The filter I use is like this:
  Does not contain a @.
  If this line is empty there is no symbol @, but otherwise he will have this symbol, since each email address there.
  You could do the same for the sender line.

• Title to refer to a friend by email

  Hello

  I need a refer-a-friend module, so I created a web form and inserted the refer-a-friend of fields in the form.

  The Web form and e-mails are ok, but I would change the title of the e-mail sent to friends, because it is said ' site name: referring site ", but the reference has nothing to do with the site itself (this is a reference to the use of a product). Is this possible? It seems that the message of tell-a-friend in e-mails from the system is related to the old module and I do not see any place to set the title of the email sent to friends.

  Thanks in advance

  Hi guys,.

  There are two distinct types of forms here.

  First, the form of "refer a friend" doesn't have any other customization.

  The other form is the 'tell a friend' tag that can be placed in different layouts of module ' news, products, articles, campaigns, etc. This specific email can be customized including the subject heading and can be found via Site Manager-> systems-> tell a friend emails.

  Don't forget to make this work you must add the {tag_tellafriend} available to the corresponding module to do this work.

  Reference:http://kb.worldsecuresystems.com/134/bc_1342.html

  I hope this helps!

  -Sidney

• Sinusoidal generator plugin

  Hello

  I use hearing to generate sine waves of different frequencies. Is the a VST plug-in free or cheap for hearing that produces the best sound quality or there are some settings I can do at the hearing in order to increase the quality?

  Thank you!

  When you start without file and generate tone, hearing allows you to select the number of rate and little sample of the file that is created for the app create tone. The application itself allows you to select the duration of the tone. So, you can use it to generate the tone with a 96 kHz or higher, 24-bit, sampling frequency that is more than enough for what audio, at least.

• Roger tone "Beep" after the audio file

  I have a question; I got files of VO that have been recorded on hearing 5.5 and 6, and they have a "roger beep" (maybe the best way to describe it) between each 'holding' sound used as an indication of separate or stop a recording of this script before going on the other. It's actually a double beep beep like a walkie talkie when you release the button send/transmit. I googled the effect but only Protools seems to have a record that... Can you help make me wiser?

  The closest you can get to that is to use the dough Mix that you can set insertion and a file. Once you've done when you can F3 to repeat the action everywhere where you stopped recording or where you have placed the playback cursor.

  Alternatively, if you can live with a single beep you can generate a short tone in the Generate/effects/tones and then save it as a favorite by clicking on the icon star in the component generate. You can then assign a keyboard shortcut to this favorite to be able to insert the beep whenever the playback cursor is located.

• Campaigns - to forward to a friend by e-mail and we add to your addressbook

  Hello, BC has sort to add these features to an email template - "add us to your address book ' and 'forward to a friend"? I found the list of tags page, there is nothing that gets the job done.

  See you soon

  Grant

  This is something that you would do with the current email client, not something of BC will be in these emails.

  1 hit forward and forward to a friend

  2. Add the e-mail to AddressBook - characteristic of all e-mail clients.

  If you want something more specific you might refer a friend link that goes to a page on the site.

• My Thunderbird email appears suddenly different.

  There is now a box of Options for each email with remote content. So, I have to click on the Options box every time to see more detail. Only had to do this sometimes before. Also, now compose an e-mail, the area BELOW: (for example; Topic) is now blued on except if I click on a zone. My Thunderbird did get somehow improved or did my wife to inadvertently access email click on something that has changed the look and feel of my e-mail system?

  You know that there is an entire article on this https://support.mozilla.org/en-US/kb/remote-content-in-messages change

  But to summarize the story.

  Previously used Thunderbird AddressBook as a whitelist for the remote images. This is no longer the case, because approval of the images by the sender is really not logical. Is permission of the source images. If the new method has a new whitelist (so it's back on who really) and options for the white list of source images. The areas mentioned in the list are the images in the mail comes. The net result is that those who hijack a friends email account to send spam will not get their images in your mail box unless you specifically allow them.

  One thing to keep in mind is that images do not have to be remote, so that these controls cover only remote images. Images that are sent as part of the email will always be blocked.

• between source and executable

  Hello...  I have a complex piece of code reasonbly LabVIEW developed by a commercial company to run some hardware they sell...  Lately, I have successfully operated their equipment of an executable built from their source code...  So far so good...  This material will again be available for me, but not today.  Looking to set up a code I need to make changes, I wanted to see how it would be difficult to get the source code to run even if there is no attached hardware...  (There are a lot of comm of TCP/IP that lights up normally, so I knew there would be a lot of "bypass" code to do...)  It is true to the source...  However, when I ran the executable made from original source code, I don't get a single error... I have not the actual data, of course, either, but I can fake that...  My curious question, is why would a piece of supposed source code generates a ton of mistakes later and quite unexpected build ERROR-FREE at all when it is running from an executable made directly from this source code...  I even went up to present as to retest the source (tons of errors), and then just at that moment to build a new executable file just to be sure I was right that the executable was made directly from this specific source code...  The executable ran without error at all...  It's actually a very useful result for me, but I don't understant why the executable generates no errors...  Your thoughts?  Thank you... Bob...

  As I said before, you have automatic error handling is enabled in your development environment, but it does not exist in the EXE file.  Use a Simple error handler to 'manage' your mistakes and you'll get your annoying popups.

• Get tables in BT via SequenceContext and PropertyObject TestStand

  I apologize if this has been asked before (it probably has) but TestStand, LabVIEW, PropertyObject and table are common search terms that generate a ton of results and I've not found any thread or info from the knowledge base.

  I spent along the SequenceContext of TestStand to a vi.  From there on, I get out of the AsPropertyObject property.  I see all the Nice GetValX methods but none that say to get a table of people.  Am I missing something obvious or is the technique to call GetNumElements and then iterate using GetValXByOffset to reconstruct the table in LabVIEW?

  Hey SmokeMonster.

  Why not use just the TestStand Set Property.vi?  I have a picture of him.

  If you don't use the right way is to use SetValVariant.  If you open this TestStand Set Property.vi, you will see how they do.

  Hope this helps,

• Windows cannot access anything WHATSOEVER. Please read and help me!

  The computer goes to market very well and everything, but it then automatically displays "Windows cannot find 'C:\WINDOWS\system32\msspi.exe'. Make sure you typed the name correctly and try again. To search for a file, click the Start button, and then click search." This computer was only randomly we gave, with nothing other than the tower. I was just going to clean by removing unwanted programs and others, but every time I click on Add / Remove Programs, it says "C:\WINDOWS\system32\rundll32.exe Application not found. So I tried to do a system restore, but I don't know if this is possible without a Windows CD (which we don't). And whenever I try to open Firefox, it says open with: program recommended, etc... so I click on Firefox and he invites me to save an exe file on the Local disk, which I do, but it does not open. Whenever I try to open all the files, MSWord or MP3, JPEG files that are saved on the computer, he essentially told me that they do not exist. So obviously, this computer can not do anything. Can someone tell me what is the problem and how to solve? I want to just fees to the computer factory State. Thank you very much!

  The file msspi.exe is probably a malicious who resided once in your system32 folder. Have you had a recent infection and run an anti-malware program? If so, you are experiencing the consequences of infection. (Of course, it is possible that there is another infection on your PC as well.)

  Once you have backed up all your data (ask if you need advice), you can restore your associations, etc. First if all, follow the instructions here:

  http://FILExt.com/FAQ/broken_exe_association.php

  You will need a PC work which is online and one of these USB flash drives to transfer the file.

  The reg. XP referenced on the above page is the same as this one:

  http://www.dougknox.com/XP/file_assoc.htm

  (That would be the ninth link "EXE File Association Fix.)

  Chances are that other associations can be broken. These patches can be found here:

  http://Technorati.com/technology/it/article/remove-after-effects-of-virusesmalwarespyware-and/page-2/

  Really, you should run a full scan with the latest version of MalwareBytes Anti-Malware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  (It is not necessary to activate the full when the choice. This way you will get it for free. The free version should be all you need.)

  And then, if you REALLY want your PC to have his "fresh out the factory condition" (perhaps not necessary, but a valid choice), you must follow the directions of the manufacturer provided. If you need advice, let us know the brand, model and model number of your PC.

  Heh. Just re-read the post. Given that this PC has been given to you, you should really flatten and rebuild, which means that it returns to its original state. I'll leave these instructions (assuming that their computers are not used). You really don't want to take any risk with a PC being used (for example, a PC that is part of the "botnet", spewing more tons of spam, keylogging programs that follow your identities, pornography, etc.).

  Edit: For best results, follow the instructions of Robear Dyer here:

  http://aumha.NET/viewtopic.php?f=62&t=44636

• address book hijacked

  A Canadian _ hijacked my e-mail address book and sends spam to the entire list using my name as the sender with a link to their web site, advertising Cheap Viagra.

  Run a scan complete with:

  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Change your password and e-mail security issue.

  Report number to your e-mail service provider

  Ask your friend for these emails as spam.

• Typical call for CM flow / unit / Fax without obtaining additional?

  Configuration:

  Centralize the VMO unit / Call Manager / fax server in the data center. Routers SRST supporting all offices. Of Fax Server supported for the unit, such as RightFax or others on the approved list.

  What would the typical call flow if we wish to have the DID numbers subscribed to do double-duty as their fax number (so that we don't need to get all the new lines DID new business cards, etc.)

  Is it still possible? How would an incoming fax call get routed to the fax server automatically rather than as an incomprehensible series of fax tones in the voice mail box?

  What happens if the user is in fact on their phone and hear the fax tone? Is it possible to Call Manager program to generate a soft button on the 7960 that says 'Send fax'?

  Thank you.

  Short story is there is no way to achieve smooth - for reasons that you kind of point in your question (i.e., what to do if the user is on their phone?). Correctly do gateways would have generated fax tone detection (in some cases, the sender Server/fax won't that until he hears a fax tone on the side response - even if it has a hole in it) and spend an event upstairs that is supplied to the unit via CM - us would then is a fax call and send it to the fax server as well as information on the phone number and number composed as the fax ended up being routed to the right area.

  There was people who tried to do things moderately awkward IVR on gateways (i.e. the caller hears "if it is a voice call, press 1" which has then passes the call via as usual or he will send the call to a port on the fax)-not an ideal interface at all and the location of is not possible among other problems.

  Is really the only way to go about it.

• Reports of the ASA?

  Okay, so I'm new to using this platform. I know that the SAA can generate a ton of log messages, but I'm curious to know what / if reporting tools are available with the ASA. If I need to correlate how many of this & this port has been affected is there an easy way to generate such a report?

  If the ASA is not too well - to do, anyone know of any request for low cost / free who can provide for robust report writing?

  Thank you

  Jim

  The ASA itself doesn't have a built-in reporting engine. The appliance can be configured to send messages to syslog (with different levels of verbosity) to an external syslog server. Once the logs are sent to an external source, there are a lot of cheap or free tools to perform some basic statements.

  There are a few referenced in this URL:

  http://www.kiwisyslog.com/kb/Info:-log reporting and analysis.

  I hope this helps.

• CompuClever PC cleaner Maestro has a malicious software?

  I bought CompuClever Maestro PC cleaner, and since then, I receive a ton of SPAM! Does anyone else have this problem? Thank you.

  Addition to the response of ahaap suggest that you review the following:

  http://support.Microsoft.com/kb/2563254

  Kind regards...