Reference Dell blutooth 370 stopped software installation on Windows 8 Pro,

Similar Questions

• New installation on windows 7 pro 64-bit sees not connected wired Officejet 6500 E710a-f

  Hello!

  New installation of Windows 7 Pro 64 bit on a gigahertz 3.40 AMD Phenom II X 4 965 with 8 GB of ram. Printer drivers worked on the same bench while he was running as Windows 7 Pro 32-bit.
  After only install FF, AVG, and Acrobat (almost a clean install), downloaded the software HP Officejet full feature and pilot 2012-10-22, Version: 116,98, 28.8 M - OJ6500_E710n - z_1315.exe and tried to install the Officejet 6500 E710a f.

  The printer has a manually set static IP and can be ping from the host. Clean Windows Firewall is disabled and stopped.

  The web interface using the IP address of the printer comes with all the features works on FF.
  Network status shows connected with IP address, hostname and Mac.

  However, when installing the network audit is no ethernet connection. Even manually enter his public static IP address or hostname does not solve the problem.

  Try the USB, the same question option. I see in Device Manager under other devices HPOfficejet 6500 and 6500 HPOfficejet - Fax with a blue questionmark.
  (In the same "other devices" there are 2 Officejet 6500 with a yellow exclamation point - probably from failed network installation).

  In the printers and devices window, the 6500 is displayed with the correct thumbnail, but with a yellow exclamation point icon. Law and by selecting the convenience store, Windows comes up with the message that no driver is installed and offers a solution.  The correction ends with the error that no drivers not found for the FAX. Re-apply the patch never finds the driver.

  Anyone who has met something similar (and a solution)?

  Thanks for any help!

  Jack

  After trying to do an install clean-install of 100% and once again, the driver software could not find the printer name or IP address.
  Back at each stage, I noticed that I was not using the correct driver! For some reason I D/L the pilot E710n which is for HP Officejet 6500 a Plus e-All-in-One.
  Whatever the difference, when installing the E710n for the model does not detect the printer, or via USB or Ethernet.
  After you download the right driver for the E710a - f HP Officejet 6500 a e-All-in-One Printer (OJ6500_E710a - f_1315.exe) installation perfectly finished in a few minutes and everything goes well...

  You would think, base or USB connectivity network should not be dependent on the specific differences sub-model. I was expecting that a bad driver interrogate the device after finding its IP address and display an error message with useful text.

• Desktop browsers does not not after the installation of Windows 8 Pro

  Since the installation of Windows 8 Pro, I can't use any browser in the office, nothing to do. All problems seem to get fixed by going to the browser on the desktop, but IE, Chrome and Firefox do not work on my desktop. Also just found out that I can't connect to the ITunes Store, either. Please help me with this. Thank you.

  Hello

  If it works well before?

  Try to set Internet Explorer as your web browser as default, it worked for me.

  See the steps provided by Jessen: http://answers.microsoft.com/en-us/ie/forum/ie10_cp-windows_cp/how-do-i-make-ie-10-defualt-web-browser/4f5a15f3-7eb5-4212-a6db-089f2426df17

  All the best...

• Old dualboot options still available after the installation of Windows 8 Pro on a desktop Pc which had XP and Windows 8 prewiev version on that front.

  Old dualboot options still available after the installation of Windows 8 Pro on desktop in XP, but now triple options. Windows 8 Pro (volume 1), Windows 8, old windows installation.  Anyone who knows how to get rid of the last two options?  The good thing is now that I don't have to put a password everytime I turn on the computer.

  Press the Windows key + X and then click System

  

  Click on advanced system settings

  Click the Advanced tab

  Under Startup and recovery, click settings

  

  Select Windows 8 and uncheck the box "time to display list of operating systems.

• browsers stopped working after the installation of windows 8 pro

  I installed the windows 8 pro yesterday and everythign seems to work with the system and applications well, my internet connection is good. For some reason all my browsers like internet explore and google chrome do not work. the integrated internet explore on the start menu of windows 8 is at work, what CA I do to solve this problem?

  I have an Hp Office p2-1123w

  I found a solution myself, everything you have to do is to update your installation of windows 8, just go to settings and click on update your computer, without modifying your files and follow the instructions on the screen.

• Cannot get wifi after installation of windows 8 pro on Dell Inspiron 3000 11 two in one

  I got a Dell Inspiron 3000 11 two in one.  He had windows 8.1 installed, but I have windows 8 pro and downloaded on my new pc.  However, my computer no longer with my WiFi.  It does not show a wi fi connection more.  My wifi worked until I installed Windows 8 pro and it worked all my other devices when on another laptop, including.  It is said that there is no link at all.  I tried to turn the wireless switch, etc.

  Hi Floyd,

  Thank you for your response.

  I appreciate your time and your efforts.

  You reinstall drivers wireless from the manufacturer's website?

  I appreciate the fact that you have already uninstalled and reinstalled the drivers wireless.

  However, I suggest you put in day wireless drivers and chipset from the following links and check if it helps.

  Network wireless driver
  http://downloads.Dell.com/FOLDER02661735M/2/Network_Driver_GY2WC_WN_6.30.223.215_A03.exe

  Driver Chipset
  http://downloads.Dell.com/FOLDER02267754M/1/3148_Chipset_Driver_P5MX8_WN_9.4.0.1027_A00.exe

  I hope this information helps.

  Thank you

• No sound, no new installation of Windows XP Pro SP3

  We had to install Windows XP Pro on a laptop but the sound does not work.  Device Manager displays the details as an "Audio on High Defeinition Bus device" Audio and show details such as HDAUDIO\FUNC_01 & VEN_1106 & DEV_1708 & SUBSYS_15580663 & REV_1007\5 & 2F010DBF & 0 & 0001

  There is a yellow question mark against this material on other devices, Device Manager. The properties indicates it is present, but no drivers were installed with Code 28. Using the results of option to reinstall the drivers in thwe Wizard saying that it cannot install this hardware because the required software is not found by the wizrad!

  I tried some drivers, such as those from Realtek, but with no result.

  Any suggestion please?

  (Note that it worked on Vista professional but which had to be replaced due to graphics card conflicts, solved with XP Pro).

  No version of Windows already had a set of drivers included. There is too much material 'out there' for Microsoft to consider being completely comprehensive installation. In any case what are Microsoft doing about / hardware technology which is backdated by the version of Windows that uses any given individual?

  Out of curiosity, what is the manufacturer of your PC? I've never heard of which did not provide for drivers.

  If they do not respond to emails, http://www.pcidatabase.com/ can be useful. Your ID Fri and dev are respectively of 1106 to 1708. Use the drivers found in this way at your own risk. Set a restore point before installation. Don't let you be guided to use any driver 'detective '. If you use Windows Update.

  As I pointed out, you may be missing other drivers too such as (but not limited to) chipset and LAN.

  Tricky

• Custom installation of Windows 7 Pro takes too long

  Well, last night I was installing Windows 10, where first steps easily on the past, as in 30 minutes the computer rebooted and reached the point of preparation, with pimples circling above the line. But in the meantime Windows to boot completely, thinking that it won't be more than a few minutes, leave the laptop on battery, I fell asleep, as I was so tired. I woke up this morning to find the computer turned off. I started it. Dotted circles appeared and after some time the dialog box, to show something like "computer is suddenly off, so that Windows cannot continue the installation.

  No problem, I thought, however feel bad.

  • I restarted the facility, the same box appeared.
  • I took the car and formatted the 469 GB primary partition, formatted the partition, MBR, revived the installation, the installation process ran more slowly than ever, everything as it was when I tried to install Windows 7.
  • I took out the disc and deleted all the partitions by using the Partition Wizard, revived the installation, the same. horribly slow. Now more than an hour has passed, and he exceeded not copy files.

  I try to keep my wits about me, as I wonder whatever happens, whatever the change, happens to the configuration of the hard disk!

  I would really appreciate if someone told me exactly how to prepare a hard drive for the custom, clean installation of Windows?

  • Here, I created a partition MBR before or during installation?
  • If Yes, then what is the size? (I think that 100 MB is standard)
  • If so, then in NTFS or FAT32?

  I can't really understand why the installation process changes the way it works.

  Is it possible that the information are rewritten on the installation media to cause this?

  I'm asking questions, but I am open to any suggestions!

  Thank you

  You confuse the Master Boot Record (MBR): https://technet.microsoft.com/en-us/library/cc976786.aspx

  with a score, they are not the same.

  A new fresh out of the box has no MBR and no partitions. Connect it to your computer as a second drive and you will be prompted to 'Initialize' the reader. Initialization creates the Master Boot Record (but not partitions). When you install Windows partitions (C: Windows and system partitions are created). The system partition is for Windows 7 150 MB (very small partition that contains data for Startup Configuration that needs to load Windows), the Windows C: partition occupies the space remaining on your hard drive. The exceptions are HP, Dell factory installed systems, Etc. which additional scores.

  

  So if you want to start again simply remove all the partitions that Windows created 10, the Master boot Record (MBR) will remain in the tack room.

  J W Stuart: http://www.pagestart.com

• Dell 720 printer won't work with Windows 8 pro

  I have loaded windows 8 pro on my computer laptop dell studio. Our Dell 720 printer stopped working during this period of transition. I tried to reload the driver but it does not seem to have loaded onto the laptop.
  Until I loaded the Windows 8 pro and then the pro pack, indicated that the printer would need an update.
  Please let me know the best way to get it.

  AD2012,

  It won't be Windows 8 drivers for this printer. You can try this, it may or may not work.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Deleting Manual printer driver

  Download the 32-bit drivers for Windows 8 32 bit Vista or 64-bit drivers for 64 bit Vista Windows 8. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  The owners of the printer color inkjet Dell 720 thread (W7)

  Don't forget about antivirus programs and firewalls will block communications. If you do not install any virus program, Windows Defender is the default virus program. Try to read...

  Enable the printer after Microsoft Essentials/Windows Defender

  Rick

• Impossible to reinstall photoshop elements 2.0 on the new installation of Windows XP pro

  Had the previous program Windows XP pro sp3 works perfectly, but had to install a new, fresh drive, install Windows XP Pro sp3 and try to reinstall all my favorite programs, including the above.  Yes, I know it is very old, but I like the way it works.

  When I try to install, I click on "setup.exe" and nothing happens except a few brief flashes of light from the hard drive to the front of the computer. No error message.

  The installation program will appear in the Manager tasks, but no activity.  Windows Setup Manager is set to automatic, but won't turn on.  I start manually, but still no joy.

  The setup.exe Properties shows a very old version of 32-bit Installer worm. 5.52.164.0 by InstallShield Software Corporation.

  No warning message.  but I've found a workaround.  I reloaded Windows XP sp1, it installed without a problem, then I installed sp3.

• Not found CD/DVD unit after installation of Windows 8 PRO

  I can't play a dvd after you have installed Windows 8 PRO. The wrong researcher: material cannot start because the config damaged or incomplete information in the registry (code 19).

  When you are looking for a new driver, told me that I have the last. I read on the Microsoft technical support who has a similar problem occurred on the Vista installation, but the solution should not be applied on this installation.

  What else is to deal with this problem?

  Hello

  Did you Win8 upgrade or clean install?

  Check it please http://eu.computers.toshiba-europe.com/innovation/generic/windows8-message and instructions.

• Bus driver SM with yellow mark after installation of Windows XP Pro

  Finally, I have windows xp pro loaded. But in Manager device theres a yellow mark sm bus driver. Searching the forum I seem to have fould to her in the video driver ATI pack. But when the driver is loaded it messes up windows so it does not start.

  Can anyone help?

  Paul

  Hello

  I am reading other threads and it seems that you have a laptop Satellite Pro A60.
  What can I say you installed the OS manually and in my opinion a simple driver is missing
  Have you tried to install the infrared driver of the European driver Toshiba page?
  It may be a key

  In any case, before you start the manual installation of the OS, you must read the Installation Instructions. You will find all drivers that must be installed and the proper installation order.

  Please check this document and follow the guidelines

• during the installation of windows xp pro, I get a message that says can'nt read the disc

  When the windows xp pro installation I get a message that says can'nt read the disk and ask a complete worm that I have a full verion

  Hello

  Using disk management to reassign the partition and try to install the operating system.

  Rgds,
  J Chambers

• PCI.sys blue screen during the installation/repair Windows XP Pro

  My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

  Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

  Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

• Installation of Windows 7 Pro on Windows Vista

  Hello

  -J' backed up all my data on an external drive.

  -A conducted an audit of compatibality and I'm ok to install 7

  -Ran Microsoft Malware Scan

  -Updated, ran and disabled virus protection

  -Checked to see if my computer was 32 or 64-bit (32)

  -Ran the Windows 7 Pro Installation disk

  * Chose to connect to the internet during installation for updates to update more

  * A selected custom installation (I like all of the deleted computer)

  He asks me, "Where do you want to install Windows?" and gives me three options.

  Disk 0 Partition 1 / 70.0 MB / 62.0 MB free / OEM revised

  Disk 0 Partition 2 (d) / 19.5/19.4 Go free / primary

  0 3 disk partition (c) / 576 GB / Gree 396.7 / system

  Which to choose and why there are three partitions?

  The first two partitions were likely put there by the OEM computer for purposes of recovery for VISTA.

  If you no longer want a return to VISTA, you can delete all partitions during the installation of Windows 7.

  See below.

  Install Windows 7

  Steps 7 and 8

  Otherwise, install on Partition 3, the C: