Reference Dell Client Manager (DCM) versus OpenManage Client Instrumentation (OMCI)

Similar Questions

• Reference Dell Open manage for PE2950 for WS2012R2

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  I know it's there because I installed it in the last company I did part of the management, but for the life of me, only two years later, I can not understand where we got the original installation to do this.

  I downloaded installed three or four to manage open on the page drivers for our service number, but one of them came with "[I'm just a patch]" and the other three have indicated that they were not compatible. Even if we set the operating system to Windows Server 2012 R2, it always gives me "for 32-bit node,' then maybe we're missing something else.

  I am hoping to win the lottery here and have a Dell technician take pity on me and direct me to a FTP location I can give to my manager so that we can get this software down to all the systems in our network.

  I can't be the only person who has faced this issue, but I may be the only person who was not able to fix it on their own.

  Help, please.

  daveepperson86

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  Fake. You will find it at support.Dell.com, select your system, change the selection in the drop-down list of OS, then check out managing systems for OpenManage Server Administrator (Managed Node). The 32-bit version is fine and installation of WoW 64-bit operating systems will be activated (all except the ' core' by default).

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=V1JDD

  You can also go to http://ftp.dell.com.

• Reference Dell Replay Manager with Actifio or well Veeam?

  I'm not very familiar with SAN storage. The company that I work is currently evaluating a backup solution that will use two Dell Compellents. Currently, we have a HDS, but are considering buying another for a warm site. The citation for the second HDS includes two Dell Replay Manager instances. My understanding is that Dell Replay Manager allows you to take snapshots, which is obviously a good idea. We also assess Actifio and Veeam as backup solutions. Replay of Dell Manager is quite expensive, and I wonder if it's necessary even if we will use Veeam or Actifio for a backup solution.

  Any who would provide no indication as to why or why we would not, want to eliminate the Dell Replay Manager of our purchase IF we proceed to a real (Veeam or Actifio) backup solution?

  Or, it would be better to abandon the Veeam/Actifio and use Dell Replay Manager?

  Thank you!

  You cannot Replay Manager if you go with the Actifio solution.

  Actifio captures the data of the production gradually environment forever and creates virtual copies for multiple use cases (data protection, disaster, recovery testing, etc.).  This architecture combines the quick capture of data from a snapshot of redundancy of a real consistent backup, application.

  Replay Manager uses instant Compellent to enter data, that work very well, but use of space on the storage array, and they do not provide a redundant copy of data.  Also, it presents itself as an additional cost and is another tool, that must be managed.  Actifio solution can provide snapshots, backup and replication through a single user interface services without storing to copy the data on the production storage matrix (copy data virtualization).

  Some of the main benefits of using Actifio in your scenario would be:

  -Copy the data would not be stored on the Compellent production table.  Snapshots of storage array can store the point at best time your production storage capacity.  Design of Actifio is to delete copies of your production sets and eliminate tools point of backup, replication, snapshots, etc.

  -Do you have a truly independent and redundant backup.  Storage array snapshots do not provide protection against the Group failures, breakdowns of the Bay or Bay of storage RAID software problems.

  -Data could be kept for more long with of Actifio built in compression and dedup global

  -Instant access to virtual copies of the data from the system of Actifio

• Reference Dell Enterprise Manager

  Does anyone know where the company dell nursery software can be downloaded from?

  If you have already installed a data collector and looking to the Compellent Enterprise Manager Client, you can get it by browsing to https://ipaddressorhostnameofdatacollector: 3033

• Reference Dell secure Manager

  Hello everyone, I bought a laptop a person, was all fine I was used at a time, now, I put a password and is not recoznige in secure dell Manager, this laptop was purchased from a friend of the Spain, that in my view, that has been activated the old password on the former owner, can someone help me to unlock my phone?

  Hi, the name of the model is DeLL Latitude E5410, with service NOTE from the ADMINtag: maintain the label removed by privacy policy >, I bought from a friend who is in business with Spain laptop, my laptop is a Spanish model, it was worked fine but I flashed the bios A07 A10, then the A10 to A13 After I have made some changes in my bios to Aureano, and I put a password on HDD and a password system, was not let put me an admin password, I guess that was configured by the former owner, then I was give restart and appears to me DeLL Data Secure Manager and it doesn't recognize my password because the Admin password was not me , so if there is a solution to this problem, I'll be greatfull, and how can I check if this laptop was stolen not? I don't want a stolen thing. And I can't connect to windows, after I typed the password 3 times wrong my phone is clogging decline. Thank you in advance.

• My Dell client does not install on XPS 8300

  Having a lot of problems with the computer down and freezing. Want to run diagnostics, but the My Dell client does not install. He gets in what concerns the 'system requirements check', and then disappears. Tried running in administrator mode. Troubleshooting of Windows compatibility shows that the program is not compatible. Running Windows 7. Any suggestions? Thank you.

  Hi Ijltisch,

  Why not just start on the F12 diagnostics partition and run Dell diagnostics from there?

• Reference Dell unified Suite wireless CPU high usage

  This software (Dell Unified Wireless Suite) as a Wcct.exe is using a lot of CPU on my Latitude E7440.  It's a consitently upper-year 20 to 30 years to low.  It causes the battery take much faster since the unit heats and the fan works.  I can finish the process (Wcct.exe) and everything seems to work very well.

  I've run the Dell Client system update utility but it does not seem to be updated for it.  Any suggestions?

  I had the same problem with a Dell E6440 laptop. Installed a Siemens software that requires a dongle for security checks. After the dongle driver installed, the WCCT. EXE process started by using 30% more permanently on the CPU usage.

  The solution is to uninstall the following Unified Wireless and just use the base wireless driver.

  Here's what I did:

  1. uninstall the driver of the offending dongle (or anything that is in conflict with it)

  2 then uninstall the Dell Unified Wireless Suite. This will leave the card driver wireless and will show a 'bang' in Device Manager.

  3. Download driver Dell Wireless but NOT install them via the setup .exe but rather, using winzip or another program to extract the files to any folder (desktop?).

  4. in the Device Manager, click on the NIC 'bang' and right click to "Update driver". Point to the directory with the extracted drivers and let him find the correct driver.

  5. now install the offending software (driver of the dongle in my case).

• Reference Dell WinPE 5.0 driver CAB

  I have SCCM SP1 R2 and the Dell customer integration Pack 3.1 2012.  When I try to import the ACR 5 of WinPE from the SCCM console, it fails with 'the selected driver package is incompatible.

  Does anyone else have this problem?  My understanding is that SCCM R2 supports Win 8.1, which is what Win PE5 comes.

  Thanks in advance

  Tony

  Hi Tony,.

  Reference Dell Customer Integration Pack 3.1 is not support SCCM SP1 R2 2012. CAB WinPE cannot be imported via CPID 3.1 and it has to be injected for the boot image. Also try the last 5.0 WinPE that is available in the link below

  http://en.community.Dell.com/TechCenter/enterprise-client/w/wiki/5029.WinPE-5-0-driver-cab.aspx

  Thank you

  Pascale Raja

• Dell Open Manage - application compatibility

  Hello

  First post here. I work for a large company and I am the 'rookie' of the service infrastructure. The company I represent have about 500 sites which about 85% have installed Dell Power Edge 310 servers. We seek to deploy Dell Open manage through the estate to monitor the performance of the server etc etc. I had to know if we could use it on other server brands, such as Fujitsu, HP and IBM.  In our data center, we use HP servers.

  So my question is could we use Dell manage open on other servers from manufacturers? And we could use it with the ILO? I know other programs of management software for the likes of HP etc etc, but as you can see I am, to say the least, a bit out of my depth.

  Any help/advice/guidance would be greatly appreciated.

  Thanks in advance.

  No, OMSA works on Dell supported running OS servers.  In other words, that it will work on:

  • non-Dell servers
  • If other computers (including Dell)
  • Servers not made Dell supported operating systems (client OS (XP, V, 7, 8), including the lack of Service Packs)

• Windows cannot find c: /? / Download/Dell - Webcam - Manager

  I tried to download dell webcam Manager but it shows error windows can not find c: program? / Download/Dell - Webcam - Manager

  I'm not able to install any new program, it shows the same error message.please help

  Hi Sandra, appriou

  Thanks for posting your question in the Microsoft community

  After the description of the question, I understand that you are not able to install any program. I'll be happy to help you on this question.

  1. what operating system is installed on the computer?
  2. What is the accurate and complete error message you get?
  3. don't you make changes to the computer before the show?

  Let us try the following methods.

  Method 1: I suggest you to run the fixit from the following link:

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: I suggest to perform the clean boot and then try to install.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  After trying the steps above suggested, giving us the results. If you are able to solve the problem. or know us additional troubleshooting results.

• Reference Dell 1700 crashed and I have no backup

  Reference Dell 1700 crashed without backup whats a girl to do
  
  

  lost all programs can run does not help

  Reference Dell 1700 crashed without backup whats a girl to do

  
  

  lost all programs can run does not help

  Reinstall Wndows.

  Reinstall all your programs from the original media or downloaded files you have saved on an external drive.

  Reinstall all your data from the backups that you made on an external drive.

  If you have not, you're out of luck.

• Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

  Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

  Hello

  1 have. what fixit you tried?
  2. don't you make changes to the computer before the show?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

• Cannot print. Reference Dell 944 communication usb port is not available. error check your firewall settings to ensure the printer communication is not blocked.

  Original title: unable to print. Reference Dell 944 communication usb port is not available.

  Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems.  I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?

  DavidNicholsonXN,

  How to download and install drivers in the correct order

  also try to read...

  The owners of all-in-one printer Dell 944 thread (W7)

  Let the printer after Kaspersky

  Rick

• Reference Dell pc with xp family. Restart to the logon screen

  Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?

  Peek into the registry to find clues.

  Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information.  Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.

  1. right click on my computer and select Properties.
  2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
  3 clear the automatically restart box and OK your way out system properties.

  Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.

  How to configure Windows XP to start in a "clean boot" State
  John

• Reference Dell M1000e + aggregator MI/O port mapping

  Hi all

  I intend to install a new chassis Dell M1000e with Dell M/o aggregator. During the time of solution, I have a few questions about correspondences between the physical uplink with NDC blade ports ports. A Please check the config below and specify my queries?

  My hardware:

  • 1 x Dell M1000e
  • 2 x M i/o aggregator (A1 & A2)
  • 16 x M630 Blade (Qlogic 57840 S ANC four ports card)

  Reference DELL M/o aggregator:

  (reserved for Future use) module QSFP + 2 ports (Port No1:33 - 36 & No2:37 Port-40)

  I want to use these two modules for my blades 4-port Quad and the confusion I had, how to associate these 16 ports (8 ports of each module) to the server blade and the amount of bandwidth I will get by blade with redundancy.

  Module 4-port SFP + 10 GbE (Flexi-O of the Bay) (Port No.: 41-48)

  Module 4-port 2/4/8 Gb FC FlexIO (Flexi Bay 1) (Port No.: 49-56)

  FYI - I would like to install ESXi 6.0 on all blades

  Thank you!!

  Vinay

  Oriented server ports are configured automatically as part of the aggregation of links groups if the server is configured for the LACP Protocol. Static GAL is not supported.

  You will use the segregation network VLAN. A VLAN for network traffic and the other for the CF. Here are the commands to configure interfaces for different VLANS.

  Unidentified:

  Dell (conf) # tengigabit interface 0/16

  Dell(conf-if-te-0/16) # vlan unidentified 4

  Output Dell(conf-if-te-0/16) #.

  Tag:

  Dell (conf) # tengigabit interface 0/16

  The tag vlan Dell(conf-if-te-0/16) # 4

  Output Dell(conf-if-te-0/16) #.

  Traffic from servers will follow the path of the VLAN. For example, if an internal server, facing the port is set to VLAN 4, that traffic will be transmitted on the uplink port which has also set to VLAN 4.

  By default, all external ports are placed in a single whole LAG. However, you can change the configuration to support several shifts of uplink. Page 159 of guys configuration takes you step by step on setting up several shifts of uplink.

  The aggregator automatically configures to match the FCoE parameters used in the switches to which it connects through its uplink ports. FIP snooping is automatically configured on an aggregator. Automatically configured port channel (LAG 128) works CWF port mode. See page 86 for more information and examples of config.

  For redundancy, you could stack the units together. 241 page details the process of stacking.

  Page 54 of 102 of the Guide blade IO has one other diagram that details more internal server port mapping for each blade.