Reference Dell Replay Manager with Actifio or well Veeam?

Similar Questions

• Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

  Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

  Hello

  1 have. what fixit you tried?
  2. don't you make changes to the computer before the show?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

• Reference Dell secure Manager

  Hello everyone, I bought a laptop a person, was all fine I was used at a time, now, I put a password and is not recoznige in secure dell Manager, this laptop was purchased from a friend of the Spain, that in my view, that has been activated the old password on the former owner, can someone help me to unlock my phone?

  Hi, the name of the model is DeLL Latitude E5410, with service NOTE from the ADMINtag: maintain the label removed by privacy policy >, I bought from a friend who is in business with Spain laptop, my laptop is a Spanish model, it was worked fine but I flashed the bios A07 A10, then the A10 to A13 After I have made some changes in my bios to Aureano, and I put a password on HDD and a password system, was not let put me an admin password, I guess that was configured by the former owner, then I was give restart and appears to me DeLL Data Secure Manager and it doesn't recognize my password because the Admin password was not me , so if there is a solution to this problem, I'll be greatfull, and how can I check if this laptop was stolen not? I don't want a stolen thing. And I can't connect to windows, after I typed the password 3 times wrong my phone is clogging decline. Thank you in advance.

• Reference Dell MD1200, H710 with R720XD

  Hello

  Asked if drieves NL - Seagate SAS (ST4000NM0023) can be used in the following configuration.

  Reference Dell Perc H710 + PowerEdge R720XD MD1200.

  The answer that I gave them was who should be tested. Because in documentation it is stated that mark Dell hard disks should be used.

  I know that some controllers Perc will give a warning each time if not dell disks are used, but they work without problems. Is this the case even when you use a box MD1200?

  Kind regards

  Indrek

  INDRP,

  You're right that only some drives are tested and supported in the bays of the MD. Here is a link that will take you to one of the manuals that list all drives supported for 1200 MD and MD1220.

  FTP.Dell.com/.../PowerVault-md1200_Reference%20Guide_en-US.pdf

  Please let me know if you have other questions I would be happy to help.

• Reference Dell Open manage for PE2950 for WS2012R2

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  I know it's there because I installed it in the last company I did part of the management, but for the life of me, only two years later, I can not understand where we got the original installation to do this.

  I downloaded installed three or four to manage open on the page drivers for our service number, but one of them came with "[I'm just a patch]" and the other three have indicated that they were not compatible. Even if we set the operating system to Windows Server 2012 R2, it always gives me "for 32-bit node,' then maybe we're missing something else.

  I am hoping to win the lottery here and have a Dell technician take pity on me and direct me to a FTP location I can give to my manager so that we can get this software down to all the systems in our network.

  I can't be the only person who has faced this issue, but I may be the only person who was not able to fix it on their own.

  Help, please.

  daveepperson86

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  Fake. You will find it at support.Dell.com, select your system, change the selection in the drop-down list of OS, then check out managing systems for OpenManage Server Administrator (Managed Node). The 32-bit version is fine and installation of WoW 64-bit operating systems will be activated (all except the ' core' by default).

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=V1JDD

  You can also go to http://ftp.dell.com.

• Reference Dell 2700W UPS with the abandoned battery status

  I have several devices UPS 2700W Dell with a network management card. Some of them are now showing State of battery abandoned in the web INTERFACE, but the status is ok. When multiple verification of the State through the Dell UPS tools is shown as the same as that on the rest abandoned situation web. What is going on?

  Hello jwillemsen

  The State indicates that the battery of that test was abandoned. I suggest that initiate you a self-test and let finish. Let me know if that turns OK status.

  Thank you

• Reference Dell Client Manager (DCM) versus OpenManage Client Instrumentation (OMCI)

  We have 7 PowerEdge servers and about 70 Dell Optiplex SX280 mainly, SX755

  I'm still confused with different management software.

  What is different between the DCM and OMCI?

  Can they work together and why should I do it?

  Why should I use Altiris (and pay) instead of DELL ITA?

  Thank you very much

  
  

• Reference Dell Enterprise Manager

  Does anyone know where the company dell nursery software can be downloaded from?

  If you have already installed a data collector and looking to the Compellent Enterprise Manager Client, you can get it by browsing to https://ipaddressorhostnameofdatacollector: 3033

• (Redirected) Reference Dell chromebook 11 with Intel i3 chip

  Hello

  I need a new Chromebook low cost asap

  What will be the chromebook dell 11, with an Intel i3 chip, go on sale?

  How it will be in the United Kingdom?

  Why not buy the Acer (also cheap) 720 / 720 p instead?

  Hi redteddead,

  Follow this link for Dell Chromebook to the United Kingdom.

  http://www.Dell.com/UK/Business/p/Chromebook-11/PD?~SRD = true & sk = chromebook & scat = prod

• Reference Dell V515w compatibility with Mac Book Pro

  Is it possible to get the Dell software to make my V515w compatible with my Mac Book Pro? I want a WiFi instead of USB.

  SheelahMeyer,

  To be able to print, try the (Driver Mac) (another Mac driver Instructions and the drivers used) (Mac Os X 10.7 Lion driver) (Lexmark S300 - S400 Series)

  You will need to install the OCR of the disk of the printer program to digitize documents and pdf files

  Rick

• Need help with Dell Storage Manager is not not able to connect to the PS EQL group

  I have recently updated our data collector and Enterprise Manager customer to Dell Storage Manager R2 2016 [Build: 16.2.1.228]. With this new version, Dell has added the ability to connect to Equallogic PS berries, as long as they are on the right firmware.

  I have two paintings of PS I want to add to the Storage Manager. The first is a picture of PS4110 in our M1000E chassis. I was able to add this PS Group for Storage Manager. But when I try to add the PS6210X, I get an error that says: "cannot add the PS Group '. No other information is provided. The two paintings are on the same version of firmware 7.17. I ping the problem array of server that runs the data collector. If Java is installed, I could even access the web gui of this table using IE. Two of these paintings IP management are on the same subnet.

  What Miss me?

  I posted this on the forum Compellent and did not have all the answers, so I write it here as well.

  Hello

  When you say you "disabled", what exactly do you have?    I suggest clearing on the banner.

  I check to see if there are any other suggestions for this problem.

  Kind regards

  Don

• Reference Dell pc with xp family. Restart to the logon screen

  Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?

  Peek into the registry to find clues.

  Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information.  Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.

  1. right click on my computer and select Properties.
  2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
  3 clear the automatically restart box and OK your way out system properties.

  Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.

  How to configure Windows XP to start in a "clean boot" State
  John

• Do a clean install on a Dell Inspiron 1525 with Vista... The Device Manager has a yellow labels on all devices under 'other devices '... Unable to connect to the Net

  I did a clean install on a Dell Inspiron 1525 with Vista Home Premium... I can't connect to Internet... The Device Manager has a yellow labels on all devices under "other devices" that includes network and ethernet controllers... Yet the utility on the Drivers and Utilities CD Dell program says that there is a "Marvel 88E80XX rev A01 10/100 ethernet controller" responsible... HELP :)

  Hello

  Use another computer to download and save the drivers to

  copy them to the flash drive and transfer them like that

  Here is the link to the drivers for your model

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=INS_PNT_PM_1525&CATID=-1&impid=-1

  to get help in this matter

  Dell support

  http://support.Dell.com/

  Dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• [Beginner] Reference Dell Audio and SD Realtek Audio Manager

  Hello world!

  A few days ago, I bought my first Dell: it's an Inspiron 15 3537. So far so good. Installed Windows 7 64 bit and some drivers, including ALC3223 Realtek High-Definition Audio Driver. Now, the sound is perfect when it's speakers, but all the times that no matter what sound plays on the helmet (the portable computer has a combo Jack), he is very strong and there is a unpleasant noise. If there is no sounds play, after a few seconds, the noise stops. (edit) The gentle sound remains the same regardless of the volume and does not grow stronger if the volume is turned up.

  I tried to adjust things in the sound menu, searched for solutions online and my best bet would have been accessing the Realtek audio Manager.

  But after installing the latest driver Realtek, I get only Audio from Dell, and it isn't much help. Looking for a Realtek in the control panel or in folders only leads to the Audio from Dell. Here, I discovered why the strange whistling sound in the headphones will stop when no sounds are played, but I can't find anything to make the noise go away:

  

  What the Dell? While I hoped something like this (taken from the internet):

  

  So, can someone tell me why my laptop is Dell Audio when I install Realtek driver? Can I "non-Dell' Realtek Audio Manager on my laptop? And suggestions to reduce the background noise in the headphones?

  Hello. Dell and Realtek replaced the DD Realtek Audio Manager with Dell's Audio Manager on Dell laptops. I don't know why. The DD Realtek Audio Manager can provide a separate headphone and speakers, volume control while the Dell version can not. Several people have reported that even when they download & install a driver directly from Realtek site, Dell Manager returns. I do not know how to defeat that (I don't have Realtek on my laptop and not the one who has it posted a method).

  You can use an online with the headphone volume control. My Latitude with IDT is not the problem of the headphone volume a lot of laptops from Realtek, but I use Koss control just because it's convenient. It's a short extension for headphones with a cursor of volume built in mitigation.

  Regarding the drivers, Dell has only one for your model out for Win7. The only other drivers Realtek would be on the Realtek site. You can also use the native Windows audio driver. To switch to it from the Realtek, follow these steps:

  1. open Device Manager (type devmgmt.msc in the start search box and press ENTER).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  If you still get the hissing or background noise with the native driver, then it is almost certainly in the material. If the noises disappear when you use the native driver, then they are caused by the driver from Realtek.