Reference Dell E6410 auto restart after BIOS update

Similar Questions

• Satellite L40 (PSL48E) - is not restart after BIOS update

  Hello

  My problem is that I have updated the BIOS and after that the machine does not restart. (Corrupt BIOS?)

  After that the BIOS updated (Satellite L40 PSL48E), reboot the machine and with the F2 key, I open the BIOS setup.
  I check the version of the BIOS (5.50) and complete the configuration of the BIOS. The machine must restart now...
  Not at all, the machine does not restart. No screen only the powerled lights.

  I can to fix it on my own as a BIOS reset?

  Thank you for the cooperation.

  It's strange because after that the updated BIOS update you can go into the BIOS.

  However, try to remove the battery and the AC adapter. Wait one hour and then put the battery back in and connect the AC adapter. Try again.

  If it doesn't work it is something wrong with the hardware or BIOS and must be checked by a technician for laptop.

• No answer does reference satellite A110-195 (PSAB0) after BIOS update

  I downloaded the latest Bios for laptop and when I installed it... It gave me an error but I can't remember it.
  So I closed the flash bios and tried to restart windows but it hung at the "closing windows.
  So I pressed the button for 5 seconds and it didn't close.

  I tried several times but no response... so I closed it by removing the battery... after that I turned on the pc, the power light is on with cd and no signal in the monitor...

  I tried to change the Rams, but no change... the hard drive works and I tried not to connect an external monitor and no changes, but I'm sure that nothing happened to the VGA card.

  Please help me what should I do

  Hello

  Do not damage the BIOS is a fundamental requirement for the functionality of the laptop. From your description, there must be a problem with the BIOS itself. I can't say with certainty that the BIOS is damaged but if you noticed the error message, everything is possible.

  I'm afraid that your laptop must be controlled by technicians. Using different diagnostic tools, they can check if the BIOS is damaged or not. Sorry, but I don't think you can do something alone.

• I want to stop pop up auto restart after windows updated.

  I saw the direction for users of XP Home going to 'HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU', but my PC does not have the do not have the "WindowsUpdate\AU", what should I do?

  Hi, Chris,.

  Backup Windows registry before you start:

  http://WindowsXP.MVPs.org/registry.htm

  How to create the key-

  Open Notepad

  Copy and paste the following text in Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU]
  "DetectionFrequency" = DWORD: 00000001
  "DetectionFrequencyEnabled" = DWORD: 00000001
  "NoAutoRebootWithLoggedOnUsers" = DWORD: 00000000

  Click file > save as

  Name: update.reg

  Save to the desktop

  Open the desktop and right click on the saved file to be merged into the registry.

  Support Microsoft - Michel - moderator,

  http://www.techsupportforum.com/forums/F217/missing-Windows-Update-folder-in-registry-359612.html

• Disable the auto restart after auto update

  I can't express how frustrating, it is at the foot of two hours of hits for a drink, to return to my job cancelled by an automatic restart after Windows update. This kind of thing has happened several times. And as I have a Vista Home Premium, I did not have access to group policy to turn off. So guys, how to prevent windows to lose more of my work with its seedy characteristics? Thanks in advance.

  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  «Using Windows Update in Windows Vista»

  Change how it gives you the updated to: ' check for updates but let me choose etc "> etc.". "

  See you soon.

  Mick Murphy - Microsoft partner

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• Reference Dell 3543 Windows 7 get stuck on login after bios update

  I connect a computer dell laptop 3543 with ubuntu and I install Windows 7 64 bit on it. I got the driver from the dell site. I installed all drivers other than the bios update. Laptop was working fine. Finally, I installed the update of the bios with laptop plugged in to the power supply. It installed fine. But after that just stuck Windows before invites it connection. I can connect in safe mode but. I reinstalled windows 7 but the problem still remains. Please tell me how to solve this problem. I wouldn't mind back too the BIOS.

  Hey Rishi,

  I found that it was also able to downgrade the bios version. BTW no usb is necessary there was an entry after pressing F12(Boot options) and there is a utility to work with bios versions. It keep a previous version of bios so I could easily select and install. As expected windows problem get solved with that.

  Thanks for all the help. See you soon

• Satellite Pro A300-15 t does not restart on the current after BIOS update

  Hello

  There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

  After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

  But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

  So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

  And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

  Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

  30/07/08
  Update the BIOS
  This Bios update adds functionality to your system.
  Satellite Pro A300 Toshiba of 3, 60 - WIN

  So please help me to solve the problem.

  Thank you best regards &,.
  Manjit M.

  Hello

  Try to update the BIOS again
  In addition, access the BIOS settings and set the default parameters. Save it and try again.

  Good bye

• Auto-restart after update-install

  How can I stop Windows from automatically restart my PC after installing updates? While he gives me a grace period of 10 minutes, I couldn't be sitting at my computer and actually see this message.

  Change the way you receive updates:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

  Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  See you soon

  Mick Murphy - Microsoft partner

• No noise/driver does not work after BIOS update

  Hey, I'm having a problem with my audio drivers. I have what I think is a HP P5RC - motherboard (I'm still not positive, because it was given to me, and I not found any precise identification on it), and I use the onboard sound on this subject. I've had versions of Windows 7 on this computer since the Release Candidate, and at the time I had to manually download the Realtek audio drivers to get the sound to work. I had to do the same thing when I got the full version of 7 Ultimate. After installing Win7, I had various problems. I was able to trace the problem down to the motherboard, but wasn't sure if it was a hardware or BIOS problem. I tried updating the BIOS to Bishop 3.08 since this page and found no big difference, apart from the fact that the sound did not work. I tried redownloading and installing Realtek drivers and restarted, but I still get all the sounds. What is another problem with the material of the motherboard, BIOS update problem or a driver problem?

  Thanks in advance!

  -AMV_Ph34r

  Edit: I should probably note that I built the computer and used the motherboard that was given to me in this document is not an HP computer.

  Edit 2: Another note - I have an Asus EAH3450 video card, which has a HDMI port on it. HDMI audio driver has two audio devices in the control panel and Device Manager. However, I do not have a compatible monitor HDMI, so I need the built-in sound card.

  Because your video card can also function as a sound card you must go into the BIOS and change your sound option to 'Auto' (which is probably trying to use your card as the audio device video by default) for the on-board sound of motherboards.

  If you found my answer helpful please say thanks with a KUDO (click on the star).

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Satellite C55-A-16Z - graphics card does not work after BIOS update

  Hello

  I have a portable Satellite C55-A-16Z with windows 8 and a Nvidia geforce 740M graphics card.

  Last week he asked me to update the version of the bios at 1.30.
  The bios update was successful.

  However when I restarted my laptop I started having a BSOD dgxkrnl.sys.
  Correction of the error and restarted for an another BSOD Windows, and after the second solution, I stopped making BSOD.
  But now, I noticed its games running, if not use the dedicated card, but use the 4000 Intel.

  In the settings Nvidia dedicated card is configured to be always on.
  It seems that my card is missing, but it appears in Device Manager.
  I tried to delete, update the drivers and the default factory reset, but nothing helped.

  Also, when I go into Options power the Intel card is listed and when I disable the card intel in the Device Manager it starts to use the graphic viewer for windows.

  How can I get my Nvidia card to work again?
  Any help is appreciated.

  Thanks in advance.

  Hello

  After the BIOS update the BIOS should be set to default settings.
  You can do it in the BIOS.

  In addition, you mentioned that Windows 8 is still installed on your laptop.
  8.1 to win has already been published by Microsoft and I highly recommend that update you the system of 8 to 8.1 Win Win.

  Before you start the upgrade to 8.1 win, you should check and read the instructions step by step for Toshiba: http://www.toshiba.eu/innovation/generic/windows8_1-message/

  I guess that after the Win 8.1, nVidia graphics card upgrade works well also.

  Your comments would be greatly appreciated.

• Laptop HP OMEN - 15-5010nr: Omen HP 15: backlit keyboard does not not after BIOS update

  This morning my HP omen arrived by mail, fully functional with everything in tact. After I left my laptop to install the updates from HP Support Assistant (one of these being an update of the BIOS updates), I returned to find my computer restarted and my enlightened retro keyboard does not. After trying to use HP OMEN control to fix the keyboard, I found the keyboard flashes when I click "Apply to all Zones", but then immediately turns off again. Is it possible to fix this keyboard backlit ir question can we see an update in the near future that resolves this problem?

  Found a solution! Apparently, the keyboard stops after the update of the BIOS, so to reactivate just push F5.