Reference Dell r610 slow start

Similar Questions

• (Redirected) Reference DELL 5547 Fan starts while that closed down and drains the battery at 0%, especially may not wake from sleep

  Hello

  When I turn off my laptop the fan starts to spin then and during a night, it drains the battery from 100% to 0. I also have some problems of marketing. If the computer is in sleep mode itself or by me, I can't wake up, need button for 10 seconds and then push again and it starts. When turned on, it works perfectly but has these problems. I read somewhere that the resolution of these problems has been to remove the software intel from my computer and I did. It helped but 2 days computer started having these problems again. My system is Windows 7 64 bit. This problem started after that I have somehow left fully charged computer asleep on the charger for about 2 hours. When I came back fan was spinning and the right side of the laptop was hot. Again, battery life is great and computer has no defects during the work (all tests by dell are passed). What can you suggest me to do?

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Reference Dell Webcam Central starts with Skype

  I have a Dell laptop with Win 7 and Skype 6.1.  Whenever I start the Dell Webcam Central from the Skype application.  Can someone tell me how to prevent it?

  Concerning all the

  Gary

  Gary,

  Right-click on the Dell Webcam Central icon in the test system, near the clock.

  Clear the check boxes that you do not want to happen.

  

  Rick

• Reference Dell 2400 will start when the power cord connected to the mains, or after restoring power. Is the result of a setting on the computer?

  The computer is turned off.  If the electricity is off, the computer will automatically start once power is restored.

  I guess it's a desktop pc that is a few years old and yes some early atx power supplies will do it, creepy when there was an interruption of the power supply when you are out and go home to find the pc on.

• Reference Dell 2150cn just started printing lines

  We had this Dell 2150cn at the office for a little over a year and all-of-the-sudden this morning it prints the line after line alternating low fashion to the page in all colors, including black.  On the only black pages it prints only black lines.  The black-and-white picture below was made from the menu on the machine itself, by cutting the driver or the network. I went to the Admin... section of maintenance of the machine and reset it by default, but nothing has changed.  None of the cartridges have been changed in the last five days.  It printed fine last night.  Here are three images of pages printed by this machine.  Thank you in advance for your time and your answers, and I hope someone can understand it.

  

  

  

  It looks like a problem with the printhead of the printer unit. Can try to make the drum under menu toner refresh and. If only the fixed, replace the doctorate.

• Reference Dell R520 slow performance hard drive with 6 x 600 GB SAS 15 K

  Hello

  We are verry bad writing performance on our R520 with 2012 R2.

  For example, install a VM of R2 2012 will be faster on my home computer on this server. As we wanted using this server primarily to see that this is starting to be a real problem.

  All hard drives are in a matrix single raid 5. There are a score of 200 GB for the OS (C:\). and a score of 2, 6 TB of data and the virtual machine (D:\).

  Installation program:
  POWEREDGE R520.
  H310 PERC RAID CONTROLLER
  PERFORMANCE BIOS SETTING
  2 x INTEL XEON E5 - 2430 V2 2.50 GHZ
  4 x 16GB RDIMMS, 1600 MHZ
  6 x 600GB, SAS 6GBPS, 3.5-INCH, 15K rpm

  
  

  Thanks in advance and I apologize for my bad English.

  Consider upgrading your controller RAID for a H710. The H310 is a low range controller and your bottleneck.

• Reference Dell E520 slow hard disk after upgrade Windows 7

  I recently updated my vista 32 bit to win 7 32 bit e520.  It seems that the drive light is constantly and when you check the performance monitor, the disc rotates 100% for several minutes at a time.  This translates into apps open very slowly, copying the files is slow, etc...

  I'm sure this is related to the SATA controller and its drivers.  I downloaded and installed later for this chipset but also downloaded the vista drivers... nothing works, nor seems to help.  Any suggestions?

  The core of this question was just a bad hard drive I think.  I ran a few tests on the system evaluation and the drive was only writing to approx.  .30 MB/sec... Yes, that's right, less than a MB... I went and bought a new hardrive and everything is good.  I guess the performance against the win7 update was just a coincedence...

• Reference Dell R610 RAID, virtual disk more problems of 1800 GB

  Hello community,

  I was frustrated by my attempt at installing VSphere 4.0 Update 2 (or 1) on a virtual disk on a SAS Perc 6, which is more than 1 800 GB in size and I was wondering if any of you have had similar experiences and how you have handled THIS.

  Unfortunately this system will use internal to the storage drive as it will be in a remote location.

  Any help is greatly appreciated

  Thank you

  Brian Wing

  Calix

  Break your table into smaller pieces. ESX requires a minimum of about 10 GB, even if you can make bigger it. ESXi requires only 1 GB. Data warehouses may not be less than 2 TB. You may be able to use virtual disks raid based to break the table.

• Very slow start and run for Dell Inspiron 6400 XP times

  "I have a problem with an Inspiron 6400 brought to ' horribly slow start and run time.  XP Pro 32 bit SP3 patched up to date.  Cleaned up a lot of "undesirable", as the partially uninstalled programs, cleaned the files temporary etc. with CCleaner, cleaned and optimized the registry afer all the cleaning has been done, defragmented, tried to start without any of the boot files, disabled all unnecessary services and uninstalled virus checking software, (but ran several anti-virus controls) etc. - no help.   Safe Start Mode is faster, but... not at all normal - 1 1/2 minutes of screen to logon instead of close to 3 minutes.  A lot of memory (2 GB), which rises to 600 to 700 MB runnng all the stuff I've tried.  Hard drive is 1/3 used out of 120 GB with a 2 GB swap file.

  One thing I'm still scratching my head over - beyond the horribly slow boot - is very slow access to files even though everything seems to work normally, but as molasses in January.  Looking at the performance of the Task Manager tab when I run a copy of a file (whether via a cmd window or with Windows Explorer), I see a near max processor would be and the other with a small business.  Even if the customer says he had been getting worse for some time, after checking and cleaning of all things 'normal', my next thought was perhaps a bad disk or disk controller driver, but chkdsk ran very well (although it took hours) even if I ' d I have already updated all drivers (and even the DVD firmware and BIOS) on the Dell web site.  Oh, and I ran Dell Diagnostics (from bootable CD) updates all with no errors found.  And access to the slow file even with symptoms had max-processor occur with a copy of the file on a USB key that seems to eliminiate the hard disk, the disk controller and the pilot.

  The other interesting part of the display for a file copy task manager is that the processes tab simply shows System Idle 97 to 99%, with a percentage of casual for other processes as Explorer while I see 1 max out procesor on the performance tab.  That the same copy on your desktop shows 3-4% of the CPU usage and who is with active antivirus software.  I'm almost ready to fall toward a Windows reinstall, but would like to find the real reason behind this problem of puzzle...

  It of almost as if he's using PIO instead of DMA disk access, but... don't know how/where to test this.

  Look at:

  http://Windows-XP-tricks.com/direct-memory-access-DMA-on-IDE-hard-drive.php

  and

  http://winhlp.com/node/10

  Solved!   Thanks for the links, especially to each other.  An old but still a goodie!

  For those who have enquring spirits (and anyone else who stumbles across this thread), the primary IDE controller has been set to PIO and locked it.  Who would have thought that Windows slowly reduced the transfer speed, whenever he saw 6 errors on an IDE device until it has been reduced to PIO and then he locked it?  But the procedures described in the link of winhlp.com showed how to solve the problem.

  There are actually several problems that led to the final symptoms.  According to KB817472, the Atapi.sys has been improved in XP SP2 only degrade the speed of transfer on 6 consecutive errors instead of 6 cumulative errors.  And even though everything I have (Microsoft update) was seen and showed that this area was to SP3, I found that the driver for the controller layer IDE was the SP2 version.  Someone ran sfc previously perhaps?

  Oh, and I know now that the Task Manager process tab does not time processor kernal, but the performance tab.  Good to know...

  Thanks again to all who have responded.  Starting at the time of connection-question now is 40 seconds.   You'll love Untra DMA mode 5.   There is still a lingering question in my mind, since I've had the same symptoms of slow copy of a file on a flash drive.  Perhaps a link in some way to the way that Windows treats a flashdrive as a "drive"...

• Reference Dell 760 does not start, cannot access the bios menu

  Desktop Dell 760 not start and displays a message: unsupported video configuration detected. I can't access installation or the bios menu. any ideas?

  http://support.Dell.com/

  Link to Dell technical support above.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Reference Dell coordinated at the link above.

  I'm sorry, but we cannot help you with Bios problems.

  See you soon.

  Mick Murphy - Microsoft partner

• Reference Dell E6420 randomly not SSD detection at startup

  Specifications of the computer:

  Dell Latitude E6420, Intel Core i5 2520 M, 2 x 4 GB = 8 GB of RAM, Nvidia NVS 4200 M, 250GB HDD, Win 7 Pro 64, Bios A23

  The value of operation SATA AHCI and not quick start. I have 3 of these computers. They are all out of warranty.

  I replaced the original 7mm Hitachi 250 GB for the Intel 535 240 GB SSD HARD drive.

  I used Acronis True Image 2016 to clone the hard disk SSD. Cloning process is very much like on any other computer.

  The problem is that each cold 4 or 5 boots the computer cannot find the SSD drive. Restarting the computer solves the problem of that time. I have to find a solution. I want to sell them with a SSD and not with a HARD drive.

  I tried the things:

  Update the Bios of the A14 to A23.

  Put a spacer of 2mm on the SSD and of course the resettlement of the SSD.

  Exchange for another Intel 535 120 and 240 GB.

  Clean install of windows I knew was a waste of time because it does not affect the BIOS does not detect not things.

  Googling the problem for hours.

  Call dell?

  Use another brand of SSD? He probobly won't make any difference to look at other threads.

  Use a HARD drive? Last resort. I can't stand slow hard disks regularly.

  Reference Dell E6420 seems to work with a Samsung 850 Evo 250 GB instead of the Intel 535 very well. Tested over a period of 3 months with no problems. Threw 535 readers intel in the desktop instead.

• Satellite A300-1MV slow slow start-up and ongoing execution place

  I recently bought a Satellite A300-1 mV it runs vista,.
  I have the trial running Mcafee and other preinstalled software that came on the phone. My problem is that the startup of the computer seems to take a ridiculous amount of time to start, once past the ORB of vista, that it says please wait which lasts about a minute until the password request is displayed.

  I had a quick glance in the problemreports in the Panel and concluded that the program of toshiba tempro was hung up at startup so disabled but doesn't seem to have any effect, I also find that when for example you double-click a photo thumbnail to view it, it takes about 30 seconds to appear on the fullscreen allthough, the window appears on the start menu to the low allmost bar immediately.

  I defragmented the hard drive, scandisk, memory checking, virus check etc... I compared it to a friends laptop dell which has less memory, but the same processor spec and vista and that seems to work 10 times faster... any ideas?, I wonder if it is a program of toshiba at the origin of the problem.

  However, I have a problem with acrobat reader from opening on its own and telling me it can't read the file (do not know what file)

  I uninstalled it and reinstalled but still have the same question...! Help!
  See you soon

  Hello

  Very nice thread on slow start up you will find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  To be honest I don't like McAfee and I installed other antivirus applications that needs far more resources. Please read this interesting thread and let me know what do you think about this.

• Cannot print. Reference Dell 944 communication usb port is not available. error check your firewall settings to ensure the printer communication is not blocked.

  Original title: unable to print. Reference Dell 944 communication usb port is not available.

  Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems.  I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?

  DavidNicholsonXN,

  How to download and install drivers in the correct order

  also try to read...

  The owners of all-in-one printer Dell 944 thread (W7)

  Let the printer after Kaspersky

  Rick

• Reference Dell pc with xp family. Restart to the logon screen

  Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?

  Peek into the registry to find clues.

  Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information.  Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.

  1. right click on my computer and select Properties.
  2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
  3 clear the automatically restart box and OK your way out system properties.

  Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.

  How to configure Windows XP to start in a "clean boot" State
  John

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102