Reference of the user goes into vCloud VcloudClient 1.5 Java SDK?

Similar Questions

• Continue to application play when the device goes into sleep mode

  Hey guys,.

  wondering if anyone knows how to maintain an active application when the unit goes into fashion watches?

  My application needs continue to work when the device goes into sleep mode if he went in that State by itself, or if the user put it to sleep.

  Yes I tried it on a physical device. It works, I promise you

  To clarify, here is what you will see when using KEEP_AWAKE:

  1 device shall not sleep when the application is currently active

  2. the device shall not sleep if the application is reduced, and you are in mode carousel

  3 device WILL sleep if the user switches to another application and full screen.

  In addition, another thing to know, if the unit is not assigned to the showcase mode, which is not by default, the audio stops when the user leaves your app. This is not related to sleep and is totally out of our control, but could be a good thing to add to your product details.

• What would happen if the computer goes into hibernation mode, but there is no free space on hard drive?

  What would happen if the computer goes into hibernation mode, but there is no free space on hard drive?

  No doubt a failure to the hibernation or a nasty system crash - not sure and not willing to risk a stable system there.  :-)

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• When I try to install Lr CC (2nd install, a laptop) the procedure goes into an infinite loop: log / level, level/sign in, etc. Actually, it does not download.

  When I try to install Lr CC (2nd install, a laptop) the procedure goes into an infinite loop: log / level, level/sign in screens, etc. Actually, it does not download.

  I have no problems with the first installation on a desktop.

  You can download at the bottom of the link:

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-downloads.html

  If you had purchased a subscription, you will need to install via Adobe Creative Cloud app.

• 64 bit Vista crashes when the system goes into Sleep Mode. Have cold start. Simultaneous began with the June 8 patches.

  This problem started a week ago, say at the time of the June 8 fix release. I think the relevant in case the log message is 'detected bad event COM + a system code back during internal processing. HRESULT is C 8007043 line 45 of d:\longhorn\com\Complus\src\events\tier1\eventssystemobj.epp. Error report, please contact Ms Product Support Services. "However, when I contacted MS, they would not help without paying the fees because it was an OEM installation. The system remains upward after the stabilization of the system going on in SafeMode after cold start, close and then switch to normal mode. However, once launched, it seem (ed) as the hard drive light was permanently. I did a restore to June 8, most early I could continue.  The hard drive worked without interruption after that.  I did a forced sleep and restart and the system froze again. With this in mind, I wonder if .NET patches that were released were running somehow at the time of sleep and that he could not recover.  OR, during sleep, the system was made of updates and the system has been disabled, corrupting the updates.  I looked at the Windows Update settings and it has been set to automatically install updates.  It is quite possible that the user did not know and did not recognize there are pending updates.  Maybe updates were not correctly packed in order to manage a system from going into Sleep Mode, while they were installing. In any case, any who would provide help on how to identify the problem and fix it.  There may be registry entries need to be corrected?

  Duane G. Leet, Ph. d. 45 years of experience in technology

  Microsoft support has provided a solution.  Here is the procedure:
   
  We can run reset Windows Update Tool and system update tool to detect incorrect manifests, files or data from the registry. Please follow the steps below.
   
  Step 1: Launch the tool to reset Windows Update and the update of the system tool
  ====================================
  1 download and run reset Windows Update Tool from the link below:
   
  http://go.Microsoft.com/?linkid=9665683
   
  2 download and run the update tool of the system from the link below depending on the Type of system:
   
  Update for Windows Vista 32-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b4d90b06-c27d-4483-bc1f-04d43fa7b293&displaylang=en
   
  Update for Windows Vista 64-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f6f353c0-d00e-43e7-97EF-0feefc7ff064&displaylang=en
   
  Note: It may take an hour or more time to detect and replace the erroneous data, please be patient. When it is finished, restart the computer and reinstall Windows Vista SP2.
   
  If Windows Vista SP2 can not always be installed, I suggest to download the stand-alone Installer and install it in clean boot Mode.
   
  Step 2: Download the installer of Windows Vista SP2 Standalone
  ===========================================
  1 download the installer of Windows Vista SP2 Standalone from the link below depending on the Type of system:
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 32 bit (KB948465) (475,5 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d&displaylang=en
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 64 bit (KB948465) (745,2 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3&displaylang=en
   
   
  Step 3: Install Windows Vista SP2 in clean boot Mode
  =========================================
  Please disable all startup items and services of third parties at boot to avoid conflict when installing Windows Vista SP2.
   
  1. click on 'Start', type: MSCONFIG in the search box and press ENTER.
   
  Note: Click 'Continue' if the "User Account Control" window appears.
   
  2. click on 'Services', check "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).
  3. click on 'Start', click 'Disable all', click 'OK' and restart the computer.
   
  Note: Disable temporarily the startup group only prevents the start up programs from loading at startup. This should not affect the system or other programs. We can manually run these programs later.
   
  4. double-click the downloaded standalone installer and follow the instructions to install Windows Vista SP2.
   
  To restore the computer to a Normal startup, repeat step 1 above. Then click "Normal startup" in the general tab, click on "OK" and restart the computer.
   
  If there are any questions or concerns, feel free to let me know. It is my pleasure to be useful.

  +++++++++++++++++++++++++++++++++++++++
  The cause was not determined, but evidence tends to a disturbance in the download or installation process, with one of the errors in the event log is an error in checksum on one of the modules. With a large file, 745 meg, the mean time to failure on a LAN network is probably shorter than the download time.  The installation process was probably longer than the time that the system has increased...  Corrective actions for Microsoft could include more small download / install, not allowing an automatic installation for automatic download over a certain size, or deal with the best controls during installation to intercept the checksum error.  Duane G. Leet, Ph. d. 45 years of experience in technology

• I can't send an email to several addresses e-mail using the mail on my iMac running OS 10.11.4.  The email goes into the Outbox, but it cannot be sent from there.  Any suggestions? Thank you.

  I can't send an email to multiple email addresses, using Apple mail on my iMac running OS 10.11.4.  With all the addresses email goes into the Outbox, but cannot be sent from there.  All solutions?  Thanks for your help.

  That could happen if one of the addresses is incorrect.

• external unknown device after device, hard drive or the printer goes into sleep/hibernation

  I guess that the problem occurs when each device goes into sleep/hibernation because this is happining to only my external hard drive and printer.  All other devices connected by USB have never no problem and will not go to standby or Hibernate. Difficulty I should close down then cold restart without connected device. then after the system is installed and running reconnect the device then it is recognized and works. I tried to just the printer powerdown (cables power and usb for printer peripheral but comp still running while still not recognized after that repower printer and then usb connection get 'unknown device'.)  The only way to obtain a recognized device, DHM or printer is as above full stop and then reconnect.  Any help would be greatly appreciated because it really is a pain and has cost me a printer that I threw out the window, luckly the window was open.  Thanks again for your time and your help very frustrated JK

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest for the link and try to run the Troubleshooter:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

  Try to update the device drivers and check if it helps:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check out the link for more information:

  Looking for drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Method 3:

  I suggest you to disable and re-enable the USB controllers:

  a. click Startand then click run.

  b. type devmgmt.msc, and then click OK. Device Manager opens.

  c. expand Bus USB controllers.
  Note: You need to scroll the list to find this point.

  d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.

  e. Repeat step 4 for each USB controller is listed under Bus USB controllers.

  Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  Let us know if it helps.

• Lose my ethernet internet connection when the computer goes into mode 'sleep '.

  I have a desktop with Windows Vista.  I have my internet through a cable company.  I've never had problems of connectivity for 2 years and then out of no where he would pass the signal after mode 'sleep'.  I had the cable company come out and check on all equipment and it's good that now, I'm still clueless and confused.  The connection icon have an exclamation point in a yellow triangle and say "limited connectivity" and «identify...» "and then I click on Local area connection status and make a diagnostic test that will get me connected to"network 2 "until it goes into sleep mode and then the process repeats.  It's boring say the least.  When I login and go to the LAKE State he says;

  IPv4 connectivity: Internet

  IPv6 connectivity: limited

  Media state: enabled

  Duration:

  Speed: 100.0 Mbps

  He said that the issue is resolved after each diagnostic test, but then it happens again.  I need some help pleaseeee!

  > I need some help pleaseeee!

  But you're in the wrong group! It is a problem with your network driver
  or your Windows installation. You have this repost to a suitable for Windows Vista
  Forum. It is possible that a newer driver from the network has a problem with sleep
  mode, you should try another pilot (older or newer).
  From your description, there is a problem to renew the lease of your
  DHCP server (which must be running on your router), it does not use the
  IP address assigned earlier or he does not do / IP address (which
  should be the same) we get the router. It is also possible that the
  problem is with the router or a new firmware on this subject. You should study
  These two avenues, including a replacement of the router and firmware.
  Another very simple solution is to configure your PC for a static IP number and
  leave it like that. In the forum, I mentioned, people will be able to talk to you
  through this option if you don't know how to do this.

  --
  Kai

  IEFAQ: http://iefaq.info Newsgroup: microsoft.public.de.internetexplorer

• When the computer goes into hibernation, it uninstall the device drivers for my HP printer.

  When you wake up you can't print anything until it reinstalls the drivers.  Sometimes, it is not automatic, that it will install the printer and drivers so I have to turn off the printer and turn it back on so it can recognize it.  It does not uninstall the printer and the driver when it is turned off and turned back on just at the moment where it goes into hibernation mode.

  Hi SFinOK,

  The best way to solve this problem is to obtain the latest Windows Vista service pack. If there is a reason why you are unable to install the latest Windows Vista service pack, the best thing is to get the fix that is mentioned in Microsoft KB 929734article.

  See the link below for more information:

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  http://support.Microsoft.com/kb/929734

  Let us know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• reset the slides when the user goes back to the slides...

  Hello

  I need to make sure that each slide, if users goes by using our back button, slide resets the same as if oyu see it for the first time...

  I'm picking this will be an action point, but not sure...?

  See you soon
  Sabine

  Go to Quiz > Quiz preferences > success or failure > if lack of rank > allow the user and define attempts something higher to 1.

  You will see then the check box show the button resume.

• Will be that the download stops when the computer goes into sleep mode?

  Will download, install, or all these action stops when the laptop goes to sleep.

  MK

  Yes, it will be.

• If the user goes to see a widget button on the results screen and if they do not show other

  I'm trying to implement a questionnaire so that the results of the screen if the user shows a button and if they fail to another button shows... I have a tip action that hides their initially on entering during the loading of the results screen. For some reason any that it does not work... any suggestions?

  My guess would be that you plan to use the quiz events If Grade from and If lack of rank for trigger actions to show or hide these legends.  Is this correct?

  If so, you should be aware that these events fire only AFTER clicking the button continue on the Quiz results slide, not on enter Quiz results slide.

• How to get the user name of the user logged into the E-Business Suite in OFA

  Hi all
  
  I developed a few screens in OPS and recorded also in Oracle applications. I need to enter the user name of the user who has logged in to the E - Business Suite to access my Application OFA, so that depends on his user name I will post a welcome Message on my screen.
  
  Can someone please suggest how to achieve?
  
  With our thanks
  Gerber

  Use pagecontext.getuserId or pageContext.getUserName in your controller

  Thank you
  Kassy

• Blue screen when the system goes into hibernation with BCCode: 9f

  Every time when my laptop back into hibernation mode, it gives me option to start in safe mode or start windows normally. When the computer starts, it gives the error message. :

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode: 9f

  BCP1: 0000000000000003

  BCP2: FFFFFA800B39F050

  BCP3: FFFFF80000B9C3D8

  BCP4: FFFFFA800F83AAB0

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\082313-10998-01.dmp

  C:\Users\ilyasm\AppData\Local\Temp\WER-108108-0.SysData.XML

  Based on a similar thread, I tried to apply the KB975599 patch, but get the following message if poster "this update is not applicable to your system".

  I downloaded the minidump in skydrive at the following link.

  https://SkyDrive.live.com/#CID=F6050197253DE2F2&ID=F6050197253DE2F2%21119

  I use a Lenovo T420s laptop.

  IM

  All of these related usbehci.sys Microsoft USB 2.0 Enhanced Host controller driver Miniport takes too long to respond.

  What USB devices have connected you?

  Here are some suggestions for fixing USB
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices