Similar Questions

• Why a slide should a double tap to move to the next slide, the others are simple taps

  Hello

  I have 4 slides of film in a keynote presentation.  3 of them, a single tap once begins the next slide.  But I have a slide film which stops, but needs two cocks to move on to the next.  They all look the same transitions and effects (IE, no)

  Any ideas?

  Barry

  The usual culprits are either an object on the slide, visible or invisible, with animation attached, or the slide is duplicated

• Representation of the State, success and completion criteria

  Hello world

  I'm looking to correct the settings with the following:

  I have a project without any questionnaire but 20 "hand"-slides that have visited me more than 5 other 'info' - slip next. "»

  The info-slides are accessible through links from main-slides, but if any user does not visit one or more info-slides, that should not affect the "completion status.

  The completion status must be defined as "Full", when al 20 min - slides have been opened.

  All the main slides are visible in OCD, 5 info-slides are marked "upon" in OCD.

  I have need correct the settings for the 'Representation of the State' and 'success and completion criteria.

  I define "slide-views" to 100%? These 100% are calculated from 20 slides visible only?

  In my project I force a user to call a slide after another and so rigorous the last slide should create "Status = Complete.

  Help, please.

  Thanks a lot for any suspicion

  Rolf

  Slide views % is for all slides. However lower the % to 80% for the views of the slide will not solve the purpose, because the user could visit 5 info-slides and only 15 master slides as well.

  Why not change approach and attribute a score to an interactive object on the last slide? It may be 1 point, and then you could require 80% of the views of slide + pass the "test" (which would mean clicking on this interactive object with the score of 1 point) and the Quiz passing score of 100% of the value.

• Suspension audio button

  Hello to you all,.

  I use Captivate 4 to create slides in which I want to add a button to an audio file. When the user presses the button, the audio would be played and repeated as many times as necessary, but without changing the blades. The audio is in MP3 format.

  Thanks in advance.

  Hello

  There are certainly ways to do that, maybe try this one:

  1. Create a box to highlight (if you don't want it to be visible, when appears, the value border and fill the color of the background)
  2. In the properties of this HB set him invisible (Options tab)
  3. Always in the properties, Audio tab, attach the audio file
  4. Create a button on the slide (visible); as an action "on success", choose 'Show' and the box to highlight

  When you click on the button on the box highlight will appear (possibly invisible by choosing the right colors) and play the audio. But after playing, there will be a jump to the next slide. I understand that you want to the slide to break again and that the user will be able to play the audio again? I hope that you use CP4? A simple way to do this:

  1. Add a very short slide (0, 1 sec) before dragging it with the Audio button
  2. Add the 'Back' button on the slide, make sure what he done a break later than the first button (to play audio) and join the action "Go to previous slide" on success
  3. Create a tip Action, e.g. labelled "BackAction": with only one action to hide the nail box again. Necessary because you cannot run an action of 'skin' coming out a slide
     1. Hide THighlightBoxItem1
  4. Attach this AA 'BackAction' out of the Audio slide
  5. Think you also need to add a third button 'Continue' to exit the loop and make the leap to the next slide.

  Hope this was clear enough, tried and it works.

  Lilybiri

• Visibility is known between slides, but the State isn't?

  I'm trying to build a module of courses around a main page with links to the section slides, which can be clicked in any order. An example of main page might look like this:

  

  Ideally, I would like to by clicking on a button to perform the following operations:

  • Set the State of the value button "clicked", which clears the background color, so it is visually clear what topics have been considered
  • Display a summary of the section to the right of the button (currently in a hidden caption area)
  • Skip a slide on the subject, which then returned to the hand glide, where we see the changes described above

  As a first step, I created a joint action for this...

  

  The strange thing is that, when I click on the first button to go to the slide, and then return to the menu, changing the visibility of the description remained, but the State has reset to the default value.

  

  Only, I was able to get the effect I wanted by exercising an action of the button, the value of a variable, then running a conditional action when the main slide load this state of button changes if the variable is set.

  Button action

  

  Drag action

  

  In doing so, for the two buttons, achieve the effect desired for them (don't mind not update the premiera for this example):

  

  So, now, I have something that works, but I'm a bit confused: I would understand if the changes of State or by changing the visibility stuck, or if both stuck, but this inconsistency makes me think to I can miss something.

  
  

  Bottom line: is there a better way to do what I want?

  You need to do with the event on Slide enter, indeed. This means that you must use variables. If you want to use a similar action in other projects, turn the conditional action in common action. When moving that shared action at the library of another project, the variables will be automatically created e.

  However: I would add the text to the "Clicked" State, which means that you don't have to use a separate command to display the text. You seem to ignore that? This is one of the screenshots of my last blog, I used a custom state (Invisible), in which an image and a text bubble was added.

  

  Based on my experience with conditional actions, especially avoid the operator "does not correspond to", you might use "equals 1' as well, more confidence.

• Limited number of visible slides in the TOC?

  Hello

  I have a project with 22 slides marked as visible in my table of contents. When I saw the project, the elements of the table of contents 1-19 go to the slide properly when I click on them, but 20-22 items do nothing. Is there a limit to how many items that will look at the table of contents, or should all be able to work? I don't know what goes wrong that would cause these three slides is not playing from the table of contents.

  She will be the chosen position, try to change that? There are other ways to push the user to take each question. Try to drag the next under the button Send button. Then, the user is not able to skip a question. And since you allow endless attempts at the issue level, he will have to answer every question correctly before continuing?

• bar menus visible during slide shows of lights

  I am trying to restore a Web site for a friend and they asked for a certain number of things when it comes to the gallery and slide show.

  they would like the menu bar to be completely visible and usable when the slideshow is active

  they would like some of the gallery items to go to three or more items addressing this element when the user has clicked instead of having a button for an item.

  these things are still possible with the muse? I've never seen it on other sites built with dreamweaver.

  Here is the site, it's a work in progress

  IDENTITY

  Lightbox should display the content where you placed on the page, but depends on the size of the screen as if the size of the small screen then the content behind jQuery can overlap.

  This is default for lightbox because content is displayed centered in the screen.

  Thank you

  Sanjit

• Slide show not visible in preview or when published

  Hello, I am trying to add a slide show on my page and it is visible in Design view, but not in preview, or when I publish. The page URL is http://thepeculiarpalette.businesscatalyst.com/artplates.html

  Here is a screenshot where it is supposed to be. The header text is not visible either. Can you please tell me what I'm doing wrong?

  

  Hello

  I checked out the site, header text appears on the page and slideshow thumbnails also shows to the top, but the image on the page do not appear.

  Tried to check and can see this picture frame that is inserted into the main part extends to the bottom of the page and so overlaps the image on the page, try to reduce the size of the frame of the image that is used in the header section so that it does without overlaps with the hero image on the page.

  Thank you

  Sanjit

• Graphic framework for slide show prevents the visibility of the ToolTip

  I created a graph simple png with a transparent Center that I placed my image slideshow behind in a page of Muse.

  However, this meant when hovered over the cursor treats the graph as priority (despite the transparency) and ignores images showing well and their subsequent info ToolTip.

  I wondered how we could create a graphical border for a slide show of images still do not lose the ToolTip text?

  As Muse has such limited graphic design means slide show normal borders are very limited within the Muse so why I created a separate chart and imported.

  Thank you

  It is not possible and has nothing to do with the Muse. It is a normal thing in the hierarchy and how browsers determine interaction based on the limits of the 'object', not the transparency pixel.  Your approach is simply not ideal and you must find a different widget that handles this natively.

  Mylenium

• Dehaze slider is visible but greyed out and unusable

  I have Lightroom CC (ver. 2015.1.1).

  In the module development, under attributes, the Dehaze cursor is not active.  It does not matter whether the image is jpg or raw. The cursor is visible in the effects section but is grayed out and is not usable.  Does anyone know how to activate the cursor Dehaze?

  Hi ifr2vfr

  What version of process are these images on?

  Dehaze filter only works with 2012 (ongoing). You find in the Calibration section of the camera in the develop module.

  Try to update the files of the (current) process of 2012.

  

  Let us know if this helps

  ~ Assani

• visible slides behind the other slides

  Hello

  I had some problems for a while now with Captivate 6, when I recorded a demo and when reading it through F12 or after publication, I am faced with a kind of double exposure, where I can see parts of a previous slide and the current slide parts.

  I tried to clear the cache, close the program and restart and it is always the case.  The problem is that this is not the case all the time.  However he has spent too much time on this project that I am pulling out my hair with it.

  I also had the 'hidden' text boxes appear where they should not be during playback.  First of all, they shouldn't be on this slide, and secondly, the tip Action hasn't called yet lol.

  Any help would be appreciated, please see the image below.

  

  Hello

  Make sure that the full version of Captivate should be 6.0.1.240 or 6.1.0.319 (help > about adobe captivate)

  Click a slide in the film and change the quality of the blade to 24 bits or optimized, then do so for each slide.

  Then click on edit > Preferences > SWF size and quality > be of custom and uncheck compress SWF file and disable the advanced file compression.

  Then re publish once again and the release check "Force republish all slides.

  Thank you.

• How can I change the size of my screen so the arrows left/right and tr side slide bar is visible. my monitor is 17 '' and the program opens too big, Pls HELP!

  My screen is bigger than my monitor 17 ". The right side is off the screen, so I can't scroll. I can barley click the left arrow to return to the previous page. Help! I've been waiting. !!!

  Hello

  see if the monitor has a reset button auto on it

  and read this;

  try changing the screen resolution 1 before update drivers

  It can only be the screen resolution settings

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  For example, 640 × 480 is a lower screen resolution, and 1600 × 1200 is higher. CRT monitors generally display a resolution of 800 × 600 or 1024 × 768. LCD monitors can better support the higher resolutions. If you can increase your screen resolution depends on the size and capability of your monitor and the type of video card you have.

• How to change the title of the slide in 6.2?

  I used Keynote occasionally for many years and more or less what I do. I have a strange problem. In a slide master who has "Title text" at the top, I want to change the words "Section title". (In fact, I want to change it to a title of two lines or two paragraphs, so I really want "Section title: ¶Topic".) When I select "Title text" box top wide gray-background appears. No matter what I try I can't 'in' the text you want to change the way I can with a text editable on the Master object. What gives? What kind of thing is? It is not yet marked as a placeholder. Why can't I change it? (The master is part of the 'Classic' theme.)

  I know that when I started working on the current slide, "Title text" does not appear. I also know that if I can type in the title of a slide based on that mask and turn it into two lines. The reason why I want a title of two lines on the master is if I can arrange rules and walks around them. In addition, I'm just frustrated of not being able to change it.

  When I select "Title text" box top wide gray-background appears. No matter what I try I can't 'in' the text you want to change the way I can with a text editable on the Master object.

  This is correct behavior in Keynote; It is not possible to change the visible text of a predefined text box in Edit Master Slide.

  The reason why I want a title of two lines on the master is if I can arrange rules and walks around them.

  Then open the master slide empty, (View > Edit Master Slide), duplicate and give it a new name, and then add a custom text box (insert > text box) and shape you need.

  You can then save the presentation or to create a custom theme, so you can use it at any time in the future.

• Why can't I download a simple left hand slider that I can SEE on Firefox? I try and I try and not sites I try will successfully download.

  I've been struggling with this problem for months. I can see is white (and too small) "more big slider Windows 8.1 offers and searched for an alternative more visible in the left-handed direction. Whenever I try to download one of the dozens of options available out there, they all fail. I am running Windows 8.1 in a new laptop from HP. I don't know where else to turn.

  If you are looking to change the cursor to point 8.1 of Windows, the best to see support of Windows for one.

• Docking station is half visible during the shutdown process

  Hello

  I did a clean install of El Capitan.

  In general, when you shut down the Mac, the Dock usually slide the screen and after a few seconds the Mac stops.

  However, with El Capitan, when I stopped the Mac Dock only halfway so that the process of closing slide is underway. So this means, usually a few seconds while the Mac stops and during this time where the dock is still visible at halfway.

  I just wanted to know if this is how it works for everyone or there is something funky in this regard?

  Thank you.

  It's funky.

  After an erase and install, everything should work perfectly. What is disk utility > report of first aid?

  Try to boot inSafe Mode and see if the problem persists?

  Restart now ' shift '.

  (Wait to take more time to start in this way because it runs a check of directory first.)

  You can try to install the OS X Combo update.  It replaces all the system files that are missing or damaged. It does not matter if you have previously applied. All your data and settings must be kept, but that said, you should always have a backup.

  Apple - Support - downloads

  https://support.Apple.com/downloads/MacOS