visible slides behind the other slides

Similar Questions

• How put two windows (both sides) will appear on the same screen together, one behind the other, during run mode?

  In Labview, is it possible to put two windows (both sides) appears on the same screen together, one behind the other, during run mode?

  It's a shame

  Secondary, it's a great way to call subVIs and you load only code when you call it, so it ease your use of resources.

  Anyway, you can call Vi as pop up:

  https://decibel.NI.com/content/docs/doc-2064

  You could split your FP using the separator.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_splitter_bars_and_panes/

  Or you can use the control tab.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_tab_controls/

  Regars.

• I managed to remove the icon to display all open windows one behind the other.

  I managed to remove the icon to display all open windows one behind the other.  Where can I find it now?

  Also, my laptop keeps getting an error when I try to restore to an earlier date and told me that it is impossible to complete.

  Hello

  Which, in my view, that you have a problem with, it's called windows Flip 3D!

  Try this first and see how you go...

  1. To turn on the Quick Launch bar, follow these steps:
  2. Right-click anywhere on an empty spot on the taskbar.
  3. Choose toolbars from the menu that appears.
  4. Select Quick Launch in the following menu so that it is checked.

  You should then be able to click the icon to switch between Windows now and use the 3d Flip...

  Or

  . Right click on the Quick Launch toolbar, but not on an icon
  2. Select the folder from the context menu. It will take you to the Quick Launch folder that should live:

  C:\Users\username\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  3. right click in an empty area of this folder
  4. Select new, then shortcut from the context menu
  5. for the location text box, enter the following text:

  C:\Windows\System32\rundll32.exe dwmapi #105

  6. click on the next button
  7. appoint. (Flip3D, for example)
  8. click on finish

  The shortcut will now be in your Quick Launch toolbar.

  Concerning

  GT4U

• How do you put one layer behind the other part?

  In photoshop, I am doing a logo. I want the ends of each "S" in this image to go in the other, but I don't want the whole S behind the other. How can I do this?

  Add a layer mask by clicking on the mask icon in the layers panel. Ctrl/cmd click on the layer icon to make a choice:

  

  Ctrl/cmd-alt/opt-shift-click on the icon to the other layer. Will you limit so the selection just areas exceeded shape both knees. Select the layer mask, and with a paint brush of black paint on the areas you don't want.

  

• Add tags for the documents tool put an object behind the other or just the contents of page deletions?

  Using Acrobat Pro XI to make PDF documents compatible 508. I had a number of questions went using Add Tags to the document option, it is one object behind the other or remove them all together. Also had problems when you try to adjust the reading direction, content is moved or deleted. This PDF file is created from InDesing CS5

  Someone knows what I'm talking about or have any ideas on how to fix it? Thank you

  Content should always be deleted by adding tags, but it can appear so because - as you note - objects can hide behind other objects. In theory, you can bring out them of hiding to rearrange things in the part of the order, but I have much more luck using the content pane - it provides a level of much finer control. If the text is hidden behind a shaded box, for example, I'll move the box over the text in the content order, then usually convert the box to an artifact if it is already.

  I hope this helps.

  a 'C' student

• How to 'hide' a single stroke behind the other object?

  I'm struggling with something that shouldn't be this difficult!

  I'm planning a logo white T-Shirt only (to go on a dark green T-shirt)

  To simplify, let's say I have two ovals with no fill, just a white line.  A small oval overlapping (sur-haut of) the part of the edge of a larger (oval below).    I have

  Any advice on how to 'hide' the line which is "behind" the top object?

  As follows: http://i.imgur.com/ZghWTMa.jpg  

  Actually, I'm not completely sure yet.

  Response to Steve assumes silkscreen with a single opaque white ink. It will not work if the composite impression not opaque transfers or cut out the vinyl applied, or if you import the work of two-ellipse for combination of other works of art.

  Because you do not know:

  1. draw two circles with a stroke color and fill color (ex: feature black, white fill) on both.
  2. apply the weight of the desired race.
  3 object > path > describe stroke.
  4 pathfinder palette: merge.
  5 white pointer: select both within the regions and remove.
  6. you now have a single compound path; None of the objects that overlap and real 'holes' where you want the substrate to show through. Applies regardless of the fill color (white, etc.) that you need.

  But keep in mind what has already been said: white, unless it is defined as a spot color, does "not print." Think in terms of inks, not in terms of 'color '. In a program like Illustrator, 'white' normally means "no ink". And we must always know what printing method that you design.

  JET

• No access to the interface of the ASA by behind the other is

  Hello

  I am faced with the issue of not being able to access the interface of "dmz" behind the interface 'internet '.

  Here is a brief description of the topology:

  

  List entry on the internet access "," allows for 1xx.xxx.172.1 traffic.

  No nat is configured between these interfaces.

  The routing is OK because hosts on the DMZ network are accessible from the Internet.

  The software version is 9.1 (3).

  Security level of the interfaces is the same.

  Security-same interface inter traffic is allowed.

  Here's what packet trace says:

  tracer # package - entry internet udp 7x.xxx.224.140 30467 1xx.xxx.172.1 det 500

  Phase: 1
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  identity of the 255.255.255.255 1xx.xxx.172.1

  Phase: 2
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  identity of the 255.255.255.255 1xx.xxx.172.1

  Result:
  input interface: internet
  entry status: to the top
  entry-line-status: to the top
  the output interface: NP identity Ifc
  the status of the output: to the top
  output-line-status: to the top
  Action: drop
  Drop-reason: (headwall) No. road to host

  Please help me find the cause why asa is unable to find the path to its own interface.

  Thank you in advance.

  Hello

  You will not be able to connect to an IP address of an interface ASA behind another ASA interface. It is a limit that has been there for Cisco firewalls as long as I can remember.

  The only exception is when you have a VPN connection that is connected to an ASA interface, then you can connect through this VPN connection to another interface of the ASA. In this case the ASA will also require that you have the following command

  access to the administration

  Where is the name of the interface to which you are connected.

  -Jouni

• How to hide half of the circle that runs behind the other circle?

  I did this planet and I want his ring to watch as it turns around him, so that the upper part of the ring must go behind the actual planet! How can I do? Also how can I add volume on the ring to make it look a bit more realistic?

  Image:

  

  Hello cyanide.

  Looks like you used the appearance 'expand' in the menu object?

• Parts of a path behind the other parts of the same road

  Is it possible to have certain parts of a path of falling behind other parts of this same path? What I have done, is to have the path of the majority behind align with the path to the front (get it?  :-) Otherwise, you would see a line and Illustrator would knock out the filling where the lines intersect (see no picture No 2)

  

  

  These pieces must be correctly drawn or created using Scouts or obscured using duplicates. I has no depth Z order for the nodes of the individual path, he obeys the order of stacking of layers and objects. Sometimes you can play a little, but who may not necessarily work with the fill rule...

  Mylenium

• Send the component behind the other

  Hello, I am currently playing on the sample application BestCamera community, and I was wondering if I could have a component showing in front of the camera. Currently, I am unable to do this, and I find myself with just the willingness to display camera any of my buttons and other items showing. Thank you

  This is probably because the z-order is not defined, look in the docs here and scroll down just a bit, there is an explanation for it. In short, if the z-order is a positive number, the ForeignWindowController is on the main screen, set a negative value would your main screen overlap the ForeignWindowController from my understanding. You also code snippets show how to set the z-order in C++.
  https://developer.BlackBerry.com/native/reference/Cascades/bb__cascades__foreignwindowcontrol.html

  You can also see the same code in the sample application HelloForeignWindow
  https://github.com/BlackBerry/Cascades-samples/tree/master/helloforeignwindow

• Well well, my screen keyboard on maintains disappear behind the other pages a new browser page opens. Why and how to fix it?

  Please tell me why it does this and how to fix it? Thank you...

  Hello

  Try the following steps: -.
  1. open your keyboard on screen
  2. under the settings menu, click on ' Always on top '.
  In this way, it would remain on top of all windows.
  Good luck!

• Why the focus of the fact move abruptly from one window (multi-onglet) to the other?

  It is an intermittent problem, which I find hard to reproduce consistently. I'll be typing something into the google search field or just do a normal surf while the page is loading. Then all of a sudden the window will exchange for another. I usually have 3 + windows open at the same time (each with several tabs). The original window remains the same size: it is placed just behind the other window that gets the focus.

  Should I try the Mode without failure of Firefox or reset? If so, it will take some time to solve the problem is difficult to reproduce.

  Hi, the problem of joints to be caused by the latest version of the adobe flash plugin.
  If you go to plugins and disable flash and then restart firefox on a google search, he's going to jump is no longer return to the search page, but page you click on will remain open.
  Adobe flash is an important plugin, so a workaround or update must be found to solve this problem.

• Make a visible page of the DDL

  Hello

  I have a script to the output of a DDL event, where if the rawValue is '8', then page8 must appear after the current page. The shape is defined in dynamic, page is set to Hidden, paging page8 has the following previous value. Here's the script:

  If (this.rawValue is '4')
  {
  When.Presence = "visible";
  }

  ElseIf (this.rawValue! = '4')
  {
  When.Presence = 'hidden ';
  }

  ElseIf (this.rawValue == '8')
  {
  xfa.resolveNode("form1.page8").presence = "visible";
  }

  on the other
  {
  xfa.resolveNode("form1.page8").presence = 'hidden ';
  }

  myScriptObject.ShowForms (page 4);

  All other lines in the script work.

  Thanks in advance for your help,

  MDawn

  I think you just need to re - write your if statement a bit.

  The line: combination else if (this.rawValue! = '4') prevents the rest of the if statement to execute.

  You must combine what you want for each State. I think it's to learn about where you want to be:

  if (this.rawValue == '4') {
            when.presence = "visible";
            xfa.resolveNode("form1.page8").presence = "hidden";
  }
  else if (this.rawValue == '8') {
            when.presence = "hidden";
            xfa.resolveNode("form1.page8").presence = "visible";
  }
  else {
            when.presence = "hidden";
            xfa.resolveNode("form1.page8").presence = "hidden";
  }
  

• Slideshow behind the image that vanishes when the mouse to display the slide show and fades in when mouseout/mouseouthandler() to hide the slideshow.

  Hello.

  I tried and tried all day.

  I even started to check the adobe edge animate to help you.

  but so far I couldn t find a solution.

  Hopfully somebody can help me.

  Here´s idea:

  I want to create a clean and simple website.

  There should be pictures, one under the other.

  When the visitor hovers over one of the images, it should disappear (fade out).

  Behind this image is a slideshow in the same format.

  When the cursor changes from space, the image is displayed again (fade in).

  Another idea is, it's a slide show, which begins when you mouseover

  and stops and shows the first picture when you mouesout the area.

  There should be no button or anything.

  Sounds easy, but I found no solution.

  Is there a possibility?

  Kind regards

  Jan

  You can try using compositions, the active State for the triggers of otherwise fair and transparent setting for the target containers. Same thing for all.

  Thank you

  Sanjit

• Cursor with several cursors: how to keep a slider to go to top/below the other?

  Hello

  I have a slider control that has two sliders. I couldn't programatical stop one of the sliders to go beyond the other.

  Is there a simple way to stop a cursor having the other?

  Stephen

  Sounds like this - http://forums.ni.com/t5/LabVIEW/Limit-range-of-one-slider-to-the-other-slider-s-value-on-a-two/m-p/2...