reformat the computer laptop and printer lost drive

Similar Questions

• interruption of the wireless connection with the computer laptop and printer

  We have a printer HP6500 we lost the connection Wireless to our Dell laptop.  Whenever we need to print to bring the laptop to the floor and connect it with a cable to print.  I tried to close the printer downstairs next to the laptop and the router but it would not print wireless.  Any other suggestions?  Thank you. CK

  Hello

  Check with HP, their drivers support and online documentation and ask in their forums on any
  known issues. As OEM HP is responsible for the good operation of the printer and provided them with
  drivers.

  More than one 6500 printer
  http://WWW8.HP.com/us/en/support-drivers.html

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Try resetting the printer with the latest drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Officejet Pro 8600: No Wifi connection between the computer laptop and HP printer

  Hi, I just added W10 os for my laptop, I was on os W7, work system very well, my printer is Office Jet Pro 8600, both laptop and printer are connected to my wireless router, but my laptop cannot find my printer, I misplaced my original disc, can anyone advise me on what it takes to please. TIA

  Hi @Rockabilly,

  I was able to locate the software you're looking for, but from your description, not having is not the software may not be the question. I will first provide you with the software, then if you continue to have problems, let me know and we can go from there.

  Printers HP Officejet Pro 8600 Plus and Premium e-All-in-One

  E-all-in-one printer, HP Officejet Pro 8600 - N911a

  Alternatively, you can also download and run the HP printer install wizard for Windows

  The HP printer for window installation wizard was created to help users download and install the latest and most appropriate HP software solution for their HP printer.

• Lost the installation when the computer laptop and desktop worked on

  How can I get an installation lost Abobe Acrobat XI Pro once the laptops and office have been worked on?

  Hi PAPilot,

  You can download Acrobat Pro 11 of: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  and use purchased serial number to activate the software.

  Kind regards

  Rave

• Pavilion dv7t-4000 laptop: AMD HDMI port on the computer laptop dv7 is lost after free trial Win10 returns to Win7 Home Premium edition

  My laptop was purchased in sept 2010 and runs Win7 Home Premium Edition (64-bit).

  It worked perfectly until June 2016, when the trial version free odious Win10 forced itself on my laptop.  I had no choice, I used Win10 for a day or 2 and then discovered that:

  (1) I lost the audio capability, HDMI port, I use to connect to my TV, and

  (2) the Win10 trial enabled me to return on Win7, I did without delay.

  In my Win 7 restored, everything was fine, except when I have her go in Control Panel to configure / reconfigure HDMI as the default, I couldn't - the element used to appear as "AMD HDMI Audio" is no longer displayed.  I remember a message during the free trial period Win10 that says it has disabled any material incompatible.  Without a doubt, Win10 free trial 'killed' this HDMI/device port, at least audio-wise.

  Today, I always run the same Win7, but I can't have audio HDMI on this port.  When I connect to my TV, the video works.  Win7 Device Manager it shows with an exclamation in yellow, and when I right click to get more details, there is a message saying Microsoft:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52).

  Is there a way to 'get it '?  'this' is AMD HDMI audio.  (and wthout spoil the graphics - that is, video)

  I tried to install the drivers provided by AMD [graphics] and that did not work. The Internet from AMD website says that the audio drivers are included in the package for graphics drivers.  There is also a huge confusion in the way these low level items are named/described: ATI and AMD, because they have merged, were used somewhat interchangeably.  I also tried the graphics drivers AMD HP Support Web site specific to my laptop and it has only gotten worse.

  Thank you for your kind attention.

  Hi @ RTX,

  Awesome response. I read the details and depth of your post. I understand that the bios is updated. So you could end up with this update.

  Happens to the other updates. This will be the order.

  1. Uninstalling the driver Chipset and resettlement.

  2 reinstalling and uninstalling graphics drivers

  3. uninstall the sound drivers and reinstall.

  Before uninstalling, you can try to update the drivers supplied by device also Manager and if that market that will be great. Please, do it only if you don't have already done.

  Before uninstalling please make sure that you capture an image of the complete Device Manager window. Take some pictures of your cell phone. Please note the exact device for audio and video chipset drivers. Then, you will need to uninstall it from the Device Manager and install from the support site in the above order so that there is no confusion.

  If nothing works as a last resort, you may need to restore complete system to factory settings. Please backup your files before doing so. This is possible since the recovery of your computer's hard drive partition.

  Link to the system recovery: http://support.hp.com/us-en/product/HP-Pavilion-dv7-Entertainment-Notebook-PC-series/4284279/model/4221688/document/c01867418/

  Please hold me. I hope that it pans well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• HDMI cable hooked up to the computer laptop and TV no sound coming from the TV only to laptop

  HDMI cable plugged laptop tp and TV no sound coming from the TV only to laptop

  [Transferred from Internet Explorer]

  Hello

  I suggest to check the audio device by default and check if it helps.

  Set the audio output device by default using steps below:

  a. click the Start button and then click Control Panel. In the search box, type sound, and then click sound.
  b. click playback devices.
  c. Select the default device (internal speakers or speakers of HDMI output) and set it as default to make the sound come from specific device.

  For more information, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows7/change-computer-sounds

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

• My printer which is connected to a home group to not communicate with the computer laptop and Netgear is not connected to my computer

  Original title: 305 lemark printer s device

  My printer will stillnot communicate with the laptop.  It is in the homegroup?  Help

  In addition, my netgear will not or connect to my computer?

  Thanks in advance for your help

  Gary

  Hi Gary,

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. you receive an error code or message?

  Please follow the methods and mark the question below:

  Method 1:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Open the troubleshooter group living:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 3:

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• I can't read my product key on the back of my laptop and I lost my drive there. My computer also, told me I need to validate to make sure it's a genuine Windows.

  which should I do when I can't read the tag product key on the back of the laptop?

  I can't read my tag of product key on the back of the laptop and I lost my drive there, and my computer tells me I need to validate to make sure that it's a genuine windows and I know that it is. Whenever I have validate, it stays on the screen never validation and doesn't change at all, even for half an hour or an hour, that it remains the same. someone will please understand this and help me...

  Hello

  As you have lost the product key of the Tower, you will need to contact the manufacturer of your computer.

  Ask them to send you a set of recovery disc for your model computer reinstall the operating system to how it was when new.

  The relocation method preceding normally does not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

• Cannot restore the connection between the computer wireless laptop and printer

  I have a Photosmart 6510 and a HP laptop computer connected wireless.  They worked together wonderfully since a few months ago, I installed the printer.  The wifi was briefly in standby.  When I sleep and tried to print I get an error message that the printer is not found.  The printer indicates that the wifi is on (blue light is on and the internet window shows that it is connected ad gives all network information, including the IP address.  I tried all my usual electronic bugs: turn the printer off and back on, unplug the printer and let it rest, reboot the laptop, etc.   I am running Windows 7.  With my old HP printer, I get an error message when the printer is offline, that would allow me to go to a "fix" and click to get back online.  I couldn't find this option now.

  Nothing works (the mobile web access so I know it is related also).

  Are there other things I can try before I have to go through the hassle of reinstalling the printer?  I hope there is an easier difficulty.

  And, if I have to reinstall it, I have to write it?

  Thank you.

  I fixed it.  I unplugged the router and the modem, plugged them back in and click on the reset button on the router and the laptop and printer now talk to each other once more.

  There is a problem with this laptop.  Before even I had a wireless printer, I have everything reset completely to the laptop if there is a power failure (but not to the modem in stanby mode).

  My second question is always true since I have to reinstall Windows 7.  Once that I have reinstall the printer do I need to re-register it?

  Thank you.

  Yay for me!

• Photosmart Prem C410 all-in-one: our laptop and printer AiO are on the same network, but laptops can 'see' printer

  Our two portable Windows 10 both our Photosmart Prem C410 AiO printer are connected to the same network (as evidenced by checking the name of the network of all 3 devices).  We were able to connect between laptops and printer without problem (printing, scanning, etc.).  A blow, or laptop computer can "see" the printer.  I uninstalled and reinstalled the printer on two laptops, but when I enter the IP address of the printer as part of the installation process, I get the error message (on computers) "your printer is not found on your wireless network.  I used the wireless Wizard connect to the printer, restarted the wireless router and restart the two laptops... the IP of the printer stays the same every time and laptops and printers continue to be connected to the same network named.  Help

  On the printer's wireless radio was 'on' but I clicked OK anyway.    Disconnected and reconnected to the network and noted the address IP of the printer had changed.  Laptops are now able to see the printer.  Problem is solved.

• Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD.

  Original title: how do peripheral DVD player on my laptop

  Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support. and also tried to solve the problems and see them all, then clicked on reading and burning CD and blu - ray discs and message saying could not identify the problem. then I went to windows media dvd player and the message saying that "Windows has no dectet a dvd playback device, if you do not have a dvd playback device, you will need to purchase and install a.. "If do not have a DVD player installed, contact your OEM or device for the latest driver for your particular device" Please can someone help me as its driving me crazy. Thank you

  You must have a third-party program to run Blu - ray discs.

  http://www.arcsoft.com/TotalMedia-Theatre/

  http://www.CyberLink.com/products/PowerDVD/overview_en_US.html?&r=1

  Your new PC must have provided with software to play. Otherwise, I'd contact the manufacturer and see if she did or why it didn't.

• With the help of the network location and mapped a drive to the server FTP. during the transfer of very large amounts of the login information is always lost.

  With the help of the network location and mapped a drive to the server FTP off site; during the transfer of very large amounts of the login information is always lost.  Computer power settings are configured to not to do no matter what, I'm assuming that the ftp server can publish a scenerio timeout but is there a way for my computer and windows to restart the file transfer?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with networking on the FTP server.

  The question you posted would be better suited in the Technet Forums. I would post the query in the link below.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• I need to transfer old to newer computer laptop CS5, but lost disk because I have not the number can only find 20 digits in the serial no while I need 24 someone can help

  I have copy of CS5 on the old laptop and really need to do on my newer computer operating system windows, but the purchased disk was originally lost.  Help please I have improved my cameras and they are not supported in CS3 and I don't want to bother with the DNG Converter.  Looking at the details of loading originally in 2010 I have only 20 digits of the serial number that I need to finish loading on the new computer from 24.

  I hope someone can help please

  If your software is still running on your old machine, you can try to save it now. See if there is an Option in the Help menu. If it works, you don't need to know your serial number to get the software registered, but your number will subsequently indicate in your adobe account.

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Pavilion ze5730us laptop: how to remove the hard drive of the computer laptop Pavilion ze5730us

  Can anyone tell please how to remove the hard drive of the computer laptop Pavilion ze5730us?  I know its under the keyboard somehow, but I don't know how or where that open.  I could not find this model on YouTube either.

  Thanks in advance for your help.

  D.

  Hello:

  The only manual that I could find is one that covers the ze5600.

  See if it will work for your model too.

  http://h10032.www1.HP.com/CTG/manual/c00246219.PDF