Refresh problem AF:table line

Similar Questions

• Drag N Drop table lines do not move a table to another Table

  Hello

  I use 11.1.7 to develop the drag N drop rows in one table to another

  1. I create a table in the schema hr as a student (sName, brands, sId, grade) & inserting values.

  2. I create EO & three your based on Student table... only three your from wise rank as (GroupAVO, GroupBVO, GroupCVO)

  3. I create page & panelgridLayout (3 columns, 1 row), I drop these three instances of VO tabular...

  4 drag the component Source and Drop target in these 3 tables...

  Run the page... page contains perfectly with the wise group of 3 tables...

  but when I drag a line a table to another table, lines do not move...

  I check my DB too... changes there too...

  No error and exceptions in my journal...

  What is the problem? Can someone help me?

  See also - Ashish Awasthi (Jdev/ADF) Blog: adding Drag and Drop functionality for collections in the fragments of the page to create insert

  Thank you

• Picture of detail not refreshing after main table query

  JDev 11.1.2.4

  I have an af:query for a criterion to display against the main table based on a date field.  The main table is updated as expected when you edit the query.  It's that the secondary table linked to not refresh when the query changes.  Retail refreshes correctly when a line is changed on the main table.  The secondary table has the ppr set to the main table.  I tried to include the query in the ppr, but it does not work.  I tried to change the ContentDelivery on both with no luck.  I looked on the forum and blogs, and I'm not finding a resolution.  I expected the ppr to take care of this because data is changing in the main table.  Any ideas what I'm missing?

  Thank you

  Rudy

  Works for me using 11.1.1.7.0 with this code in the page:

  model = ' #{bindings. " ImplicitViewCriteriaQuery.queryModel}"queryListener =" #{bindings. " ImplicitViewCriteriaQuery.processQuery}.

  queryOperationListener = ' #{bindings. " "ImplicitViewCriteriaQuery.processQueryOperation}" resultComponentId =": resId1" / >

  emptyText = "#{bindings." DepartmentsView.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." DepartmentsView.rangeSize}' rowBandingInterval = '0 '.

  selectedRowKeys = ' #{bindings. " DepartmentsView.collectionModel.selectedRow}.

  selectionListener = "#{bindings." RowSelection DepartmentsView.collectionModel.makeCurrent}"="single"id ="resId1">

  headerText = "#{bindings." DepartmentsView.hints.DepartmentId.label}"id ="resId1c1">

  headerText = "#{bindings." DepartmentsView.hints.DepartmentName.label}"id ="resId1c2">

  headerText = "#{bindings." DepartmentsView.hints.ManagerId.label}"id ="resId1c3">

  headerText = "#{bindings." DepartmentsView.hints.LocationId.label}"id ="resId1c4">

  emptyText = "#{bindings." EmployeesOfDepartmentView.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." EmployeesOfDepartmentView.rangeSize}' rowBandingInterval = '0 '.

  selectedRowKeys = ' #{bindings. " EmployeesOfDepartmentView.collectionModel.selectedRow}.

  selectionListener = "#{bindings." RowSelection EmployeesOfDepartmentView.collectionModel.makeCurrent}"="single"id ="t1 ".

  "partialTriggers =": resId1: qryId1 ">

  headerText = "#{bindings." EmployeesOfDepartmentView.hints.EmployeeId.label}"id = 'c4' >

  headerText = "#{bindings." EmployeesOfDepartmentView.hints.FirstName.label}"id ="c1">

  headerText = "#{bindings." EmployeesOfDepartmentView.hints.LastName.label}"id ="c5">

  headerText = "#{bindings." EmployeesOfDepartmentView.hints.Email.label}"id = 'c3' >

  headerText = "#{bindings." EmployeesOfDepartmentView.hints.PhoneNumber.label}"id ="c2">

  Check partial triggers used in your code...

  Timo

• How to display this checkbox at the bottom of table lines.

  Dear friends,
  
  I created a table and a checkbox element in this region.
  I want to display this item box after rows in a table.
  
  How to display this checkbox at the bottom of table lines.
  
  
  Thank you

  Hello

  OK, sorry.

  Place the checkbox element to declare and report change 'display point"for example"Page Template Body (2. (éléments ci-dessous le contenu de la région) ".

  Kind regards
  Jari

• Filter table, after refresh problem?

  Hello

  I use jdev 11.1.2.3

  My problem is that I have a table on the user interface with options blockable for each field, when I search for any domain name specific using existing word, it will come as usual

  but, when I refresh or open another form and then after arriving at this table that UI may not be updated... How get an idea...

  Thank you.

  Hello

  You can use the code to do so below.

  FilterableQueryDescriptor queryDescriptor = (FilterableQueryDescriptor) getYourTable () .getFilterModel ();

  If (queryDescriptor! = null & queryDescriptor.getFilterCriteria ()! = null) {}

  queryDescriptor.getFilterCriteria () .clear ();

  If you want to refresh the table also use the threshold

  getYourTable () .queueEvent (new QueryEvent (getYourTable (), queryDescriptor));

  otherwise use this line

  yourVoIter.getViewObject () .getViewCriteriaManager () .clearViewCriterias ();

  }

  Thank you

  Alisson

• Clear the check box in the new if invalid table line

  Hi all.

  I use JDev version 11.1.2.4.0.

  I have a table with 2 columns, which one of them is a checkbox. I want to clear this check box if the user inserts a newline invalid. So far, I have an EL expression in my field to disable: disabled = "#{viewScope.viewBean.disable}", where a Boolean variable disable is. "

  I put the variable Boolean true when the user inserts a line not valid, but I am not able to update the fields. The only way I can do this is to update the entire table, but then I lose the filters.

  For example, I want to do something like this:

  I have a VO employed with the salary attribute where the user can search/insert/update / delete. The user searches for all employees with > 30 k salary. Then, the user inserts a new employee, but he or she inserts one that's already in the DB. So, the line is not valid. I want to disable the all check box in my table WITHOUT losing the > 30 k search salary. If I update the entire table, the search has disappeared and all employees are shown.

  Any ideas?

  Edit: I also tried this approach, but I had the same problem with a refreshing existing lines: https://udayarocks.wordpress.com/2011/07/30/how-to-conditionally-enable-disable-the-column-contents-in-the-adf-11g-table...

  The transitional value will remain if it is added to the OS, not the VO.

  Timo

• Problem with animation line flicker/aliasing

  Hi I was wondering if anyone had any suggestions on trying to get this smoother animation and a little crisper.

  I know that the quality will be slightly less good in a gif format.

  https://S3.amazonaws.com/uploads.hipchat.com/115279/3089179/b6GFClDGSBHAucu/lines.gif

  Thank you

  Let me give you a few basics. These are things that are not considered by almost everyone that starts working in the video, especially those who come from a print or web design background. Photographers are also victims of a flaw in their knowledge which is understandable because they have never had to deal with things like this before. Here are the facts.

  First Point:
  Video (and everything that comes from digital displays) are always arranged on a grid of pixels. No exception. You can never put a line width of single pixel on this grid of pixels and do appear as a single pixel line, unless it lines up perfectly. Nothing that is not precisely aligned to the pixel grid is interpreted. It is called Anti-aliasing. This means that if your 1-pixel thick line is to halfway between grid display will be the average of the values in this row and you end up with a broad line of two pixels on the screen with each line taking half the value of the color of the original line. In other words if you are not precisely aligned on the grid of your 1-pixel wide black line becomes a 2px wide gray line.

  Second Point:
  Video is composed of images that reading at a particular rate. Your screen also has a refresh rate. Display rate standard in countries that have 60 Hz electricity usually have a refresh rate standard 60 Hz or multiples of a whole number of this rate divider. In countries where electricity is 50 Hz (Europe), the refresh rate is usually 50 Hz. The video frame rate for video in NTSC countries (most of the world) are normalized to 29.97 FPS (there's a reason associated with the problem of broadcasting TV signals in color, but I won't go into that right now). The Standard in PAL countries video frame rate is 25 fps. When you choose a frame rate for your video project which is not the frequency of standard images for your area, you may rate for your video come into conflict with the cadence of your screen. This can cause perfectly smooth motion judder and there is nothing you can do about it, except change the refresh rate of your screen or lift it up with a new high refresh rate capable display or change the frame rate of your video.

  Third Point:

  The average human eye and brain have a property called retinal retention. These effects how we perceive motion. No matter what you do, most people perceive incorrectly flexible movement across their field of vision. Most of the time the brain tries to iron out things and your eyes automatically try and follow this movement. This effect is well understood by the great directors when they block shots and the great directors of photography when they put cameras if your eye is directed to the part of the frame where they want that to get you to understand the history.

  Fourth Point:
  There is a strobe effect that applies to all the movements. For example, if you watch an old movie on TV western, you will sometimes see the wheels of the car rotate backwards. Smart of an airplane propeller video phone can show you that strange Sword-shaped blades turn slowly or even backwards. It's the interaction between pace and movement. The only way to create videos that shows the movement correctly and in the right direction is to match the query of the cadence.

  Fifth Point:
  Work around the fine lines, turning it into a thicker lines is to disable interpolation. You can do in After Effects by selecting quality draft. With quality lit project, you will always have a thick black line of single pixel. This solves a problem, but worse the other. The problem of the stroboscopic effect. To make your single pixel with black line SOUPLESE you must match the query of the line to the frame rate. You move 1 pixel by image or 2 pixels per image or 3 pixels per image or 4. You cannot move to 1.4 or 2.8 pixels per image. It won't wok, it would never work.

  Sixth Point:
  Even if you perfectly fit the pixel grid movement, you can still run on the retinal retention problem and frame rates. Every Director of professional photography with a value of his day rate knows that there are critical speeds of Pan - speeds during which you can not move the camera in a scene and offer a scene that doesn't pan and look terrible. Jerking can be so bad that it gives people headaches and worse. The frequency of images the more cautious, be with the camera. When the video cameras of 24 frames per second were introduced a whole bunch of people came back with horrible images. Shots that run at 29.97 work at 24. Cadence, retention of the retina, strobe effect and your brain combined with no fixed focal point for your eyes to focus on and track combine to fault up to the shooting and of the query.

  The solution:
  When you want to animate a thin line, you're better off at 29.97 frames per second that anything slower. 30 is OK if you go never broadcast or DVD to watch on a TV. You can use an expression to control the movement, so that your line moves exactly an even number of pixels per image. If your design requires that go you faster you must hide the problem with motion blur. If you want to lighten in and clear it of movement then you must hide the problem of aliasing with motion blur. Smooth long moves must be exactly to an even number of pixels per image. You have more options of speed at a higher speed. Even at a higher speed, you will encounter the problem of the sixth Point.

  The evidence:
  Any problem of smoothing by giving you the discount gray lines load the rendering of your lines animated in AE and step as part of an animation at the same time. Baring any cache image and to make the issues I bet that your animation will run without difficulty from one image to the other. It is only when the video plays back at speed that your eyes and your brain will tell you that the movement is uneven.

  Certain standards:
  Go to a cinema and watch the end titles. It takes about 7 or 8 seconds (depending on the height of the frame) for securities to roll from the bottom of the screen upwards. The second seven rule is pretty standard. With 29.97 FPS 1 video per image pixel, 2 pixels per image and 4 pixels per image work well enough for most applications. When you find a speed frame rate works for your video, it's the frame size and it is write it down. Use it again and again.

  This is an expression that works at the speed of the animation and allows blur to apply to your image. You can do the movement meet the markers if you want to start and stop. I have a bunch of preset animations that I use all the time for that style of animation.

  Bottom-up:

  t = time;

  en = t/thisComp.frameDuration;

  x = value [0];

  s = 4; Speed in pixels per image must be an integer

  y = value [1] - (fr * s);

  [x, y]

  Left to right:

  t = time;

  en = t/thisComp.frameDuration;

  y = value [1];

  s = 4; Speed in pixels per image must be an integer

  x = value [1] - (fr * s);

  [x, y]

  If you wish to reverse the direction, you can add a sign less in the final table or apply the term of anchor instead of position. These expressions take the initial starting position of the layer as a starting point. Both are moving to 4 pixels per image. To start and stop the movement, the simplest method is to split the layer, add the expression, let the layer move, then divide the layer again and delete the expression. If you are handy with expressions, you can bind the movement to layer markers, and then just move the markers for start and stop, or even reverse the direction of a single layer.

  If you don't want to mess with all those unbreakable rules then jack up motion blur and uses a higher cadence with thicker lines and hidden defects. There are no other solutions.

• Old data refresh - problem of mapping - OWB has not been removed.

  We use OWB 11.1.0.7 on Windows 2003. I created the dimensions and cubes and they are all worked well. The problem is when I tried to update the warehouse using new data, new data have been loaded into the dimension, but some old data were still there.
  
  In the map, I used a materialized view to map to the dimension. I checked the old data was not in the materialized view, but was still in the dimension. The steps I took were:
  
  -mv re-imported to OWB,
  -synchronized to the source and the target in the mapping.
  -related table redeployed + dimension and mapping,
  -run the process flow.
  
  And the target schema has update privileges and DBA role.
  
  In mapping out bug mode, I saw some old data + new data has been loaded. In the details on the use of excution process flow, no data has been deleted. The mv database have been inserted, but old data merged too.
  
  Could someone help me on this? Thanks in advance.
  
  Georges Nicks

  Hi Georges Nicks.

  As far as I understand - you complain that some old data stood at dimensions? That is the data existing only no more on the source (view materialized in your case) always tables exist in the target (implementation of the dimension) table. I suppose also that you use ROLAP for cubes Dimensions (are you? Or you use OLAP?).

  I also assume you are using the operator of dimension as target in your mapping? How OWB keeps changes in your target size depends on how you have designed your dimension and it's attributes. Is it configured type 1 (overwrite the former record on change), 2 (new record on change) or 3 (keep the old value in a separate change column)?

  Anyway - I think that for all types of above dimension, the default behavior is not to delete the old dimension records. In general, it is reasonable since in Datawarehouse you typically add more data (you keep the history). When you say "Refresh" the datawarehouse - usually means adding new recent data (do not purge history).
  Something interesting here, that is why you want to purge old dimension records: violent keep consistency in your data model, if it breaks some features? Or you keep more small dimension for query performance reasons?

  It is true however that OWB lack such feature to automatically recognize this kind of change as "disappeared from source folder". And that change is sometimes important and must be reflected. In my practice, I used different approaches to deal with this - for example:
  * Add all missing documents on the left side of the mapping with a gauge field EXISTS_IN_SOURCE = 'n' artificially. In this way - OWB processes the records and marks in the target size as «not active more»
  * You can manually (we write some PL/SQL) to process the dimension after loading in OWB (by using step after mapping or some extra in your workflow). It's up to you how you process to remove lines here (you can mark them as EXISTS_IN_SOURCE = 'n', you can update their expiry timestamp, or you can serve them).

  Situation with cubes is similar - if you really need a purge of the old data: you must especially take care to implement.

  Kind regards
  JAVOR

• Possible to option and click to add a new table lines WITH borders

  I recently "upgraded" to the latest version of the Pages. In the version previous (Pages ' 09), option-click on a row or column added a line or column and the new, it would automatically have the same borders that has been clicked on the option.

  In this new version, option-click adds the row or column, but it is not about the attributes of the edge of the line or the previous column.

  Is it possible to do without having to go into the cell style attributes and assign borders for each?

  Any rejection of Pages v5 (including 5.6.2) is based on the Pages ' 09 v4.3. They are quite different applications and v5 lacks about 100 features that did not exist in the Pages ' 09. Even the architecture of document is not backward compatible. Your upgrade to the last Pages is a downgrade in functionality, and Pages ' 09 likely lies in Applications: iWork ' 09 file. Use and treat yourself to a true upgrade.

  That said, I've selected a line in a new table of Pages v5. Changed the border line and color to 2 pt and blue respectively. Then I option-click on this line several times, and the added lines were identical on the border style has changed from the original line. I can't reproduce your problem described here.

  Tested with Pages v5.6.2 on OS X 10.11.6.

• dealing with problem of tables to play instrument

  Hi all

  I have struggled with this problem for weeks and hope someone in this forum can help out me. I'm reading data from a Phmetre via the RS232 to my computer. I read with reading VISA database and write code and have configured my setup series to finish reading to a line Feed (\n). I use the code in my attachment to analyze the data to read only the number of ph using string functions, search and replace, etc.

  Like the phnumber, I get only for a fraction of a second poster (when my tranmits instrument data IE every 5 seconds) using just the function of this channel, I added a case statement to search channels > 0 to display the data (number of ph) until the next update. I showed this in my snippet too. It works fine, but I get a bunch of 0 in the output array when my case is false.

  I initialized the array with dimension size 0 too and then use the array to build to add any new information to my existing table using a while loop with shift registers, but the table in the annex, I get has each exit number of ph with 7 other 0. I guess the array build feature allows 8 tables of element which will be formed with each transmission, or the way I am parsing the data is perhaps incorrect. I'm pretty new to Labview so don't know what I'm doing wrong.

  Conversely, in order to work around this problem I tried to add 8 elements of my annexed table at a time to see if I can generate a ph real number with each transmission, but don' know to do that either. I need to obtain a table of items with all numbers different ph no no to do a running average and min/max function but have contacted many people who could not help me arrive at an appropriate solution to this problem.

  I'm looking forward to any suggestions to make my code work better. I'm sorry that I couldn't reach the entire code as its exclusive information.

  Thank you very much!

  I can't confirm this function completely just watch a snippet, but according to your description, it seems like if you read the serial port at a faster rate that the device sends a new value. That's fine, but clearly, you do not want to add another element to the table if there is no data there. It seems as if this is the problem that you are experiencing. So while you can do something with some "use of data", I do not completely understand > 0 check must also drive a structure deal to the control that you add to the table, or use the existing table.

  Tip: Since you are a beginner, you should get used to try not having son ebb and passes. Clean wiring is not a matter of pickiness. It's a matter of being able to follow and understand the code, especially for someone else who may have to look at your code.

• Problem with overlapping lines all showing the report.

  I have a sample of data as shown in the attached file.

  I created a report for the data (such as it is attached). When I saw the report that I see the formatting of the table is not correct. It is as shown below.

  

  The dotted lines are just a reference. they are not actually rendered. I think that the Extension of the line of the table to the right is due to overlap. How can I avoid it?

  Please use the attached RTF model and let me know if problems.

  Manually adjust the width/height of the cell or table, and then choose the option for each of the nested tables and parent table.

  

  

• Show the button when in a table line selector is checked.

  Hi all

  I have a problem with the display / hide button in the tabular presentation selector line box is checked.

  It is used when the line is posted. But when I add the line and the line is not registered it does not work.

  Could you you that someone please let me know why this does not work when the line is not registered?

  I have the ready example in apex.oracle.com

  APP ID: 62796

  User: Nancy

  Pass: Devone123

  WS: troylagi

  Thank you

  Troy.

  Hi Troy,

  Your new line in the form of tables is dynamic html, so the scope of the event must be dynamic. I changed your dynamic action that this:

  

• Refresh the result table or rerun the query

  I have a requirement, simple but stuck somewhere.

  Jdev 11.1.1.17 Expert level: Mid-Senior

  I have a form of application and the associated result table. It works great and no problems.

  My requirement is that I have a commandlink on one of the column. Clicking on that will open a popup with an editable filed. OK will commit and Cancel will close the pop-up window.

  After that the popup is dismissed with partial trigger, my table refreshes but data is identical to the front. But if I click the Find (Search) button on the query, it shows the data with the results updated which are changed in the pop-up window above.

  How do I update table which re - runs the query and then refreshes the table after the popup is dismissed, or when the user clicks the OK button in the pop-up window.

  Get on the viewObject of this table and call the executeQuery method that

  Write this method in the method AMImpl and then call it in bean managed using the OperationBinding at the click on the Ok button of the dialog box

  ViewObject vo = this.getViewObjectName ();

  vo.executeQuery ();

  Ashish

• Selective filter table lines advance

  Hello I have an advanced table and I want to loop in the selected lines.
  I can loop through all the lines, but I think that this is not correct as step its better loop only the selected lines.

  My initial code:

  int fetchedRowCount = vo.getFetchedRowCount ();

  {for (row = vo.first (); line! = null; rank = {vo.next ())}

  If (row.getAttribute("SelectFlag").equals("Y")) {}

  code here

  }

  }

  Someone can explain me how to use the code below for a loop and select the values for each row?

  A new way has been found, but I have problems with the loop
  Rank [] rows = vo.getFilteredRows("SelectFlag","Y");
  
  

  Try this:

          Row[] rows = vo.getFilteredRows("SelectFlag","Y");
          for(int i=0; i
  See you soon
  AJ
  		   

• Problem joining tables; duplicate records

  I have problems with my request. She joined essentially three tables. I am inside the environment of the Apex, but this problem is with my request. I have three tables:

  JOBS

  Job_Id PK

  Job_Number

  Goal

  Title

  JOB_BUNDLES

  Job_Bundle_Id PK

  Modification_Number

  Justification

  Job_Id FK

  JOB_TASKS

  Job_Task_Id

  Sequence

  Task_Id (values can be either 1,2,3,4,5 or 6)

  Job_Bundle_Id FK

  You can see the stream / connection between each table. A JOB can have several JOB_BUNDLES and one can JOB_BUNDLE have JOB_TASKS a lot. One-to-many relationships

  My query now displays a report of JOB_BUNDLES for a given job, represented in the form:

  SELECT
  Job_Bundle_Id, Modification_Number, Justification, Job_Id
  FROM JOB_BUNDLES JB
  WHERE JB.Job_Id = :P26_Job_Id
  

  The page element, P26_Job_Id represents the Job_Id of the WORK of the table argument. That said, each record JOB_BUNDLE will have JOB_TASKS related records; more specifically, there will be at least a record where JOB. TASKS. Task_Id = 6. This happens only once. I can't get my information from the request that I submitted and the information from the table JOB_TASKS where the Task_Id = 6. I tried to add a JOIN and a WHERE clause, but I still get duplicate records. If anyone has some insight on this issue, it would be greatly appreciated. Thanks in advance.

  What:

  SQL > select b.*

  2, (select t.sequence

  job_tasks 3 t

  4 where t.job_bundle_id = b.job_bundle_id

  5 and t.task_id = 6

  (6) seq

  job_bundles 7 b

  8 where b.job_id = 1;

  JOB_BUNDLE_ID MODIFICATION_NUMBER JUSTIFICATION JOB_ID SEQ

  ------------- ------------------- ------------------------------ ---------- ----------

  1 0 there is no justification 1 12

  2 that 1 I'm just here for test 1

  3 2 it's the third amendment 1 7

  3 selected lines.