Reg: Query Get IP address and host name

Similar Questions

• IIS and sql server 2000/2005 if problems ip address and host name changed

  Windows Server 2003, IIS 6.0 + SQL SERVER 2000/2005

  Is there a problem if ip address and host name of the server is changed?

  for example

  IIS 6.0 may still work properly?

  SQL Server 2000/2005 can still start correctly?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• Restore the virtual hard drive backup on a different node with different IP and host name.

  Hi guys,.
  I want to do the following.
  
  My reliable backup strategy is the virtual hard drive backup. The database is installed on a virtual particulay machine (node). Now, I do not take the backup of the DBF files or control files or files from archive.
  I rely on the virtual hard disk backup. It takes the entire Virtual Machine backup. Now, I wanted to restore this virtual hard drive backup to a different node with different IP and host name.
  But before I start the database, there are some things I need to do.
  As change address IP address and the hostname registered with the database installed and its services.
  
  Please guide me through the steps on how to perform the activity.
  
  Concerning
  Lam...
  SOA admin.

  I think that the whole operating system will be restored in a new virtual machine... I have it... The changes will have to be done in the file listener.ora (hostname or IPADDRESS and also PORT NO in case you want another port as the existing one). Once you have made the changes that you have to bounce the listener, I mean stop and start the listener... I don't think that any other changes are needed... Make sure that the same need for entries (from the listener) to be included in the TNSNAMES file. ORA file both client-side... The tns service is used to connect to the remote database server (from the demand side or whatever source you used to connect to the database server)... I just think that the change to do... Hope its clear... Please try...

  HTH
  Kind regards

  IMRAN KHAN

• How to re-scan the relationship between computer ip addresses and network names

  On my SBS 2003 network with six or so field PC clients and a few extra non-domaine workgroup (a few XP, some Windows 7) PCs, computers can access each other using \\computername. When I change the IP normally assigned by dhcp to a computer on my network to a static IP address, sometimes the other computers can no longer use \\computername, but I now have to use \\ip-adress instead.

  For example, A computer can open the folder "\\mypc\shared". I change the IP address on "MyPC" to a static IP, 192.168.0.220. Now the other computer must use \\192.168.0.220\shared"to access this folder '; \\mypc\shared' returns an error that the specified computer could not be found (or something like that).

  I know that I can enter the names and the ip addresses in the Hosts file, but it is manual, and computers it does automatically the first time.

  How can I get the PC to re-scan the computer names and IP addresses and link them back to the top?

  This can be a master browser problem, look in the event viewer for clues, these browser issues usually register error event ID 8021 and 8032.

  Note that this can take up to 13 minutes for a master browser broadcast and announcement answers from computers on the network, the browse list may not be filled until the ads are complete, so everything can be good.

  Stop and restart the browser to the computer repaired (or restart) on the computer that has the functions of the master browser will force a regeneration of the browse list.

  John

• problem to create a new ip and host name on ELM

  Hello.

  I am a model with CUCM, UNITY and IM/PRESENCE in V9 in my lab.

  By the link to ELM I download the txt file and generate a license demo on www.cisco.com/go/licence.

  I create an account with the ip address 10.101.1.10, hostname SV000150 and login password to synchronize the license. Everything was ok.

  I need to change the IP address of cucm but not the host name.

  I'm connect to ELM and I remove my account first CUCM but now I can not create a new account CUCM with ip adresss 10.11.0.1and the same host name.

  There is a message saying: this IP address /Hostname is already create!

  I have to insert genuine license in my CUCM and I don't know what I can do.

  Thanks for your reply.

  Excuse my English is not perfect, I'm french...

  If a restart of the node running ELM doesn't let you overcome this problem, it's time to call TAC that the record did not get erased from the database.

• Server of VMotion of mailbox Exchange causing interruptions in service of the virtual IP address and Cluster name?

  Hi people,

  Is this expected behavior with VMware, when you do VMotion for mailbox Exchange Server 2007 SP1 of the JRC in the case of DR, he stopped the production node?

  Because during the VMotion virtual IP address and NOMCLUSTER does not not in the massive blackout of ping, which causes in the box the production mailbox.

  the solution was to turn off instance after the VMotion DR do fail over to the node of production again.

  No explanation for this incident would be great.

  The problem with your Exchange databases failover to the other node in the cluster during vMotion is due to heart rate is lost between the nodes during the migration.  This is the same problem that appears in Exchange 2010, when you perform a vMotion and there are solutions documented (of Microsoft) to get around that.

  Before discussing make these solutions work with Exchange 2007 and Windows Server 2008, I looked up the political support of Microsoft for Exchange 2007 and virtualization.  Short version - vMotion is not supported in Exchange 2007.  See below:

  Microsoft supports continuous replication Exchange cluster (CCR) and single copy clusters (SCC) in environments of hardware virtualization, provided that the virtualization environment does not not based on hypervisor clustering or migration solutions (for example, Hyper-V migration fast or ESX from VMware vMotion) that are configured automatically failover or move servers from mailboxes that are run as hosts between root servers.

  http://TechNet.Microsoft.com/en-us/library/cc794548 (EXCHG.80) .aspx

  This description sounds a bit like a mix between vMotion and vSphere HA to be honest, but it is directly from Microsoft for Exchange 2007 support page.

  For me, if Exchange is a critical application, then that's the end of the story and I wouldn't try to use vMotion.  I switch on services between the nodes in the CCR cluster and stop the passive node when I needed to perform the ESX host maintenance, etc..

  If you want to test at least to see if you can get vMotion to work, you can adjust the cluster heartbeat timeout settings in Windows to leave more time for the vMotion to complete before the cluster fails over to the passive node.  Instructions for how to do this are in the blog post following (bearing in mind that, although the blog is specially for Exchange 2010, the controls are Windows commands that should also work with Exchange 2007):

  http://www.thelowercasew.com/vSphere-and-Exchange-Admins-can-live-in-harmony-Microsoft-finally-supports-HA-and-VMotion

  So in short - you can probably do vMotion works correctly by changing cluster heartbeat timeout values, but it is probably not worth since the configuration is not supported anyway.  If you want to adjust the values of pulsation of cluster you test this in a development environment before making the change in production.

  One last bit - if your organization has a Microsoft Premier support agreement, then Microsoft will probably support the configuration even if the documentation says that it is not supported.  Check if your organization has this level of an agreement of support and if so, check with your Microsoft representative as vMotion for Exchange 2007 configuration is supported.  Make sure you explicitly Exchange 2007 because we know that it is supported for Exchange 2010.

  Matt

  http://www.thelowercasew.com

• ESXi 4 - changing IP and host name

  Are there any known issues or needed additional steps beyond to enter the ESXi configuration console to change the host name and the IP of the server ESXi 4 existing (4.0 U2) and import in vCenter if physically move one envirment to another server (i.e. a Server Blade environment vsphere 4 test to another box to Prod vSphere 4)?  Or are there additional steps necessary?

  Also, would there be problems within ESXi if just to swap hard drives, if the servers are of the same model (i.e. blades HP dl480 G6)

  It's a fairly simple process to change the name of host or IP address - http://kb.vmware.com/kb/1006710.  If the host is currently bound to vCenter you can remove everything first.  Then you'll just join the host of your vCenter production after your changes in the same way that you would join a new host.  You can check the file on ESXi hosts to make sure that the host name is updated correctly and see if all custom entries has been added.

  You can swap disks, but you may need to correct assignments NIC after and you will need to check things if you use remote storage.  ESXi also uses the MAC address of the vmnic0 for the MAC from the management port so you'll want to update that to avoid the possibility of duplicate MAC address should end up with the two hosts on the same subnet.

• How to get the number and the name of the contacts selector

  Hi all

  I got the Contact Picker work but I have no idea how to get the selected telephone number and the name.

  There are attributes that I can put like contactId.value () to retrieve or there is another way?

  Thanks in advance.

  ImageButton{
                      defaultImageSource: "asset:///images/bluebutton.png"
                      onClicked: {
                          contactPicker.open();
                      }
                      attachedObjects: [
                          ContactPicker {
                              id: contactPicker
                              onContactSelected: {
                                  result.text = "You chose contact: " + contactId;
                              }
                          }
                      ]
  
                  }
  
                  Label {
                      id: result
                      text: "You chose contact: "
                  }
  

  Hello

  You can get the contact name and phone number as this,

  ImageButton{
                      defaultImageSource: "asset:///images/bluebutton.png"
                      onClicked: {
                          contactPicker.open();
                      }
                      attachedObjects: [
                          ContactPicker {
                              id: contactPicker
                              onContactSelected: {
                                  result.text = "You chose contact: " + contactId;
  // call a cpp method to get the details
  

  app.getDetails(contactId); } } ] } Label { id: result text: "You chose contact: " }
  

  the CPP code:

  void ContactDetails(ContactId id)
  {
  Contact contact_info = m_contactService->contactDetails(id);
  
      QString firstName = contact_info.firstName();
      QString lastname = contact_info.lastName();
          QList phoneno_list = contact_info.phoneNumbers();
  
      QStringList no_s;
  
      foreach(ContactAttribute attr, phoneno_list)
      {
          no_s << attr.value();
      }
  }
  

  You can get details like this.

  Kind regards

  Naresh Kodumuri.

• Cannot recreate the listener after changing the ip address and the name of the server

  Hoping someone can give me some ideas - I do not know what else to try.

  I run a 11.2.0.4 database on windows 2012.  I just got back my database to a new server and am trying to rename the server and assinging the new ip address.

  I stopped all the oracle services and change my servers ip address and name.

  Then, I dropped the listener who has been spending more time than it should have, but when I checked that the service has been removed.

  When I try adding the listener it hangs right on "would you like to configure another auditor?

  Then, I realize very quickly that I forgot to change the environment vairable HOSTNAME and the TNSNAMES file.  I cancelled the wizard still Net and

  fixed files and tried again.  The continuous Wizard to crash at the same place - never time - just hangs.

  Does anyone have ideas, what could be bad?

  Thank you!!

  Kathie

  be sure the two Services of OS for earphone & database have been started & running

  no listener.ora file is necessary to start or use Oracle listener just open the command window and issue after an order

  lsnrctl start

• How to get the LOGO and company name in the theme of the 4 apex

  Hello
  
  I use the theme 4 for apex 4.0.2.
  I must have the logo as well as the name of the company the two, but when I select den Image it shows only the image in the dashboard and when I select den text it shows the name of the company.
  How to get the two logo and the name of the company?
  
  Thanks for your help.
  
  Kind regards
  Sébastien Pallav.

  Pushpesh Pallav says:
  Hello

  I use the theme 4 for apex 4.0.2.
  I must have the logo as well as the name of the company the two, but when I select den Image it shows only the image in the dashboard and when I select den text it shows the name of the company.

  The word is spelled 'then', not 'den '.

  How to get the two logo and the name of the company?

  Select the text, and include HTML, making reference to the image in the text:

  
     Company Name
  
  

  The image src URI used depends on the location of the image, which you have failed to specify.

• Re-install LabVIEW after the reconfiguration of the IP address and computer name

  I was working with LabVIEW 8.6. Recently, I reconfigured its name and the IP address of my desktop computer and rebooted the system (recommended once you change the IP address). LabVIEW8.6 has stopped working because soon, I restarted. Tried to uninstall LabVIEW thro' Control Panel Add/REMOVE programs but I got a warning message "this program is already uninstalled. ' When I clicked on DELETE button the National Instruments missing name immediately from the Add/REMOVE program list without having to open the UNINSTALL program. Then I manually deleteg 1.2 GB of LabVIEW files from my "c" drive program files Then I started to reinstall LabVIEW 8.6 but I get the error message that ends the installation. I tried retracting towards the former name of intellectual property and the system was not working and also tried the system restore is not working too.

  Hello

  When I tried to open LabVIEW after initial reboot (i.e. restart after setting up my IP address) I got an error message saying "Unable to open LabVIEW, program completed/closed" error message similar to one when you complete a program thro' Task Manager and you get an od option send error report and do not send report. After that, I went to add/remove programs to uninstall LabVIEW, when I tried to delete I received a warning message "this French program has been uninstalled" and the LabVIEW icon has been removed from the Add/Remove list of immediately. Then I looked at my size in my c drive OR folder, here I have a 1.2 GB of files OR installed; so I manually deleted them (thinking that this would help prevent the crash/corrupt new files when reinstalling). So when I started to reinstall I got SDK Service error - error 12.

  It is a part of volume license

  It looks like my hard drive crashed, so changed to hard drive and reinstalled on the new drive, looks like it's working fine now.

  Ben thank you for your help.

• my printer requires a proxy name and address and a name, where can I find these?

  I do not understand the difference between the wireless and connected web. My printer OfficeJet 6500 said now I need a proxy name and address, who they are and where to find them

  Here is a link to a post that provides a solution to your problem. It covers the steps I'd take that do a reset on the printer and check the EWS (built-in web server) to ensure that the proxy fields are clear. It will then cover how to set a static DNS on the printer via the integrated Web server. It is also an Officejet printer in the other post. Even if it is a different model SAP at foot by steps are the same. Here is the link: http://goo.gl/vMNYD I hope that this ehlps.

• Determine the IP address and the name of the unit of endpoint connected to a virtual desktop

  Is it possible to determine what is the network name or IP address of the device that is connected to a virtual office?  I have a client with Wyse thin clients that use random names and would like to know where this information for remote management.

  
  Thank you.

  HKCU\Volatile environment on the virtual desktop must contain information on the device that you connect from.

• How can I get the numbers and the name of the piece?

  How can I get a # and compatibility for Pavillion DV7-4065dx parts list.

  Especially need to get low basic coverage.

  Your interview Guide & list includes:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=4221673&task=&

• Is there a way to get the ip address and the hostname for clients without having to install vmware tools?

  As the title.

  We use vSphere 4, some users do not want to install VMware tools on the guest. Y at - it a way for the vCenter get ip address and host name for the guests?

  Hello

  As far as I KNOW, the answer is no.

  The vmware tools are needed.

  Best wishes / Saludos.
  Pablo

  Please consider awarding

  all useful or correct answer. Thank you!! -

  Por favor considered premiar

  any respuesta correcta o util. ¡¡MUCHAS gracias!

  Virtually noob blog