Regarding the CD key

Similar Questions

• Regarding the encryption keys

  Hello

  I'd generated encryption keys to ID of Proxy running Maxl operation and also corresponding SQL ID and keys on password which uses to get inside the SQL data source, which is part of the Maxl script. Now, when I use a new key for the Proxy ID ID SQL fails to connect. How these two devices is connected? Here, I'm a bit confused.

  Any comments?

  Thank you!

  Yes, that's what I was getting in my post above.

  Looks like you have encrypted the Essbase and SQL credentials with key public different .  Given that you can send a private key for MaxL when you run an encrypted script (and you must use the public key / private in a pair), it does not work.

  You do this because your Essbase password changed?  If so (and assuming you know the Essbase password so the SQL password) I would just create a new key pair, creating an unencrypted version of the script and then to encrypt the script by using the normal procedure in the Tech Ref.

  Incidentally (and not directed against you, 955124), identification information encrypted in MaxL are a confusing feature for me.  Without doubt, we are concerned about people with read access to writing, see the password.  But anyone with read access to Scripture who knows the private key can copy the statement login and create their own malicious script.  If the answer is "but they do not know the private key", then why can't we just set up the script and hide the password of any medium is acceptable to secure the private key?  Someone please tell me if I'm missing the point...

• I'm trying to re - install windows xp. I get regarding the selection of CD/DVD to install (enter), then I press any (I have not pressed a key any), screen is empty, and that's all.

  My first attempt seemed to work although I don't not re-install all the drivers at this time here.  When I then turned on computer, I got a white screen.  I took advice and tried to install xp again.  I get regarding the selection of CD/DVD to install (enter), then I press any (I have not pressed a key any), screen is empty, and that's all.

  Hello

  It seems that this computer is not able to detect the drive. Use the steps described in the article mentioned below to clean the disk, and then try to install XP.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  If you are able to boot to the desktop without inserting the disc, please perform a flat installation.

  How to perform a flat Installation of Flat copy CD to hard drive:
  http://support.Microsoft.com/kb/294727

• regarding the key primaries composit

  Hello
  
  My parent table with composit primary key on two columns.
  
  I need to use these two foreign key columns in the child table.
  
  After you create the parent table, I am facing problem to create the child table, it still shows no unique primary key found
  
  is it possible to do like this?
  
  
  Kind regards
  SH

  While composite primary keys are legal in data modeling, a lot of people don't like them when it comes to practice. This is partly because they take more space and require more typing (additional join clauses) and partly because of a suspicion that composite keys are more likely to evolve and therefore more troubled over the lifetime of the database.

  It is common to treat the composite key as if it were a key to the business: ensure uniqueness with a unique constraint, but to define a (synthetic) surrogate primary key that uses a single column for foreign keys.

  Cheers, APC

• Questions regarding the installation of key code

  I was helping a friend with his computer. She bought a computer to measure with Widows XP installed on it, a store of the local computer, about three months ago. She got big virus on his computer. If she needs to format and reinstall Windows XP.
  She did not have a sticker with a code on his computer from the store of the local computer. She won't pay hundreds of dollars just to get xp installed.

  Question #1: Must the machine store provide stickers key code when window selling?

  Question # 2, she had the sticker with a code, it could install it with a normal drive in Widows XP Home Edition using his key code?

  I was helping a friend with his computer. She bought a computer to measure with Widows XP installed on it, a store of the local computer, about three months ago. She got big virus on his computer. If she needs to format and reinstall Windows XP.
  She did not have a sticker with a code on his computer from the store of the local computer. She won't pay hundreds of dollars just to get xp installed.

  Question #1: Must the machine store provide stickers key code when window selling?

  Question # 2, she had the sticker with a code, it could install it with a normal drive in Widows XP Home Edition using his key code?

  I'd be very suspicious of any Windows installation where the seller has NOT provided a product key.
  There are utilities that will tell you what the product key is a copy installed Windows.
  This is what I use:
  http://www.Belarc.com/free_download.html
  You must go back to the store and query why there was no product key...

• I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  Hi iambjan,

  I understand that your MacBook Pro has been lost by the intermediary of find my Mac mode. Fortunately, you can go to the off mode lost through the steps described below.
  

  You can disable the lost Mode by entering the password of the device, or by following the steps below. Alternatively, you can follow the steps below to change the details displayed on your lost device.

  Note: If your credit cards and debit to pay Apple have been suspended because you put your iPhone in lost Mode, when you disable lost Mode and reconnect to iCloud, you can continue using your cards.

  1. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  2. Click on all devices, and then select the device that is lost.

  3. Click on lost Mode, then change the information or lost the stop Mode.

  If you cannot use lost fashion as find my iPhone is not configured on your lost device, see the article by Apple Support If your iPhone, iPad or iPod touch is lost or stolen.

  SEE ALSO
  Remove credit and debit of the portfolio (or book) maps

  iCloud: use lost Mode
  https://support.Apple.com/kb/ph2700

  Kind regards.

• P5P34EA: how to turn off the FN key?

  Hello

  How to turn off the fn key?

  Please READ: everyone saying fn = f10 or fn + f2

  but it's not doing nothing for me! and ctrl + esc just display

  me information of sistem!

  Help, please

  Thanks, March

  Hello

  Try the next method.

  Hold the left SHIFT key you click Shutdown to temporarily prevent hybrid boot.

  Let off the laptop computer for 10 seconds.

  Start by typing esc button permanently as soon as you press the power button (do not wait for the prompt) and see if it will access the start menu - if that is the case, select f10 to open the Bios Menu.

  Kind regards

  DP - K

• HP Envy 17: Reverse the function keys

  Hey guys,.
  
  My laptop is a very good laptop, with a good graphics card nvidia an i7 cpu and even 16 GB of ram. Even with a 17 inch screen full HD 1920 * 1080, making incredible games! Even GTA V for Pc works quite well on this laptop powerful.
  
  All of these things are an amazing gaming PC, however, it has a match no one back which makes it almost impossible to play a game with good fluidity.
  
  Present a defect of fatal game is actually the keyboard, but to be more precise, it is the function keys. The HP Envy 17 has two F1 - F12 and INSERT key. However, these are the secondary keys. Primary keys are keys system that changes the brightness or volume. That means if I want to use F2 in a game, I have to hold the function key, and then press F2.
  
  This seems minor, but when you play, it can be annoying to have to hold down a function key just to use one of the F keys.
  
  Dies, does anyone know how to get this fixed and reverse the trend, in this way if I want to cut my cell phone that I have to press the function, then the F6 key. I hope that people know what I mean and please if you know of a fix would be great if you could post it below.
  
  Thank you
  Connor Burnett.

  Hello

  Yes, I used the F1 - F12 keys on a daily basis for the last 35 years or so, but fortunately I always use external keyboards using laptops (on or off a docking station). You may not share, but disable. Please use the following article:

  http://support.HP.com/au-en/document/c02035108

  Kind regards.

• HP ENVY laptop - 15 - ae101no: control of the Volume on the keyboard keys do not work!

  Hello

  Volume control keys had suddenly stopped working, and I have no idea why. I have the model HP ENVY laptop - 15-ae101no (ENERGY STAR). Could you please help me fix it? Thank you!

  Hello

  Try the following.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74867.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72105.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter and then hold button power supply for 30 seconds, then release.

  Plug the power adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Toshiba key feature Suggestion - option to reverse the effect of the FN key

  If there is an option to reverse the effect of FN + Fx, for example, if this option is enable pressing the F7 will increase the light and won't F7 effect, and so on for all other keys.

  If he can make more than 1 option in this idea, for example reverse only the buttons Fx
  Invert TAB button to eject the DVD-RAM
  reverse number 3 + 4 button for the volume
  .. .etc

  * edit: *.
  It would be better if there are options to reverse the FN buttons all one by one so that you can customize your keyboard you want :) *.

  I would like if someone can pass this idea to the developers of Toshiba

  Kind regards

  > It would be better if there are options to reverse the FN buttons all one by one so that you can customize your keyboard that you want to

  Well, to be honest I have not missed this option and the possibility to change the function keys in the past.
  But of course this is only my personal opinion.

  However, let's see what are the additional features will run in the new version of the key of service Toshiba utility.

• Satellite M40X-286: energy saving and the E - key utility does not work on Vista

  First of all, sorry for my bad English.

  I managed to install Windows Vista Ultimate 32-bit on my Satellite M40X-286. Everything works, except for the energy saving and the E - key utility. I tried the added value of packages of other TOSHIBA models, but they all give an error message during the installation. Is there a solution for this problem?

  Now I can't change the speed of the processor and the brightness of my screen, and I can't even adjust these settings in a power mode. The only way to change the brightness is manually using the FN + F6 and F7 keys.

  Kind regards
  Stijn.

  Please don t be crazy about me, but there is no problem at all. The situation is quite clear.

  First: tools and utilities are similar, but in most cases have to be adapted for each laptop model. It may happen that some tools work on the different model of laptop, but this does not mean that he has to work on each model.

  Second important fact is that Toshiba does not Satellite M40X support for Vista operating system and I guess you won't be able to use this tool. In my opinion, it is not so important, because all the energy-saving settings you can find in Vista power options.

  For utility E - key, I don't see a solution. If you use OS not supported, you must live with it.

• Startup message Equium A60 VERIFIER SYSTEM THEN press the F1 KEY

  When I turn on my equium a6o I get

  check the system. then press the f1 key

  When I press f1, I get

  Enter date:... /... /...

  When I enter the date and press enter nothing happens then it shuts off when I press ESC. NE1 got a solution apart from my idea of friends 'it's bin

  Hi Notino,

  It sounds as if your CMOS chip has a problem, maybe the CMOS battery has failed and the BIOS settings are lost.

  I suggest that you only contact your ASP closest to get your phone checked.

  Kind regards

• Re: Satellite has - how to restore the functionality of the FN key?

  Once from time to time (perhaps after a few updates?) the FN key doesn't work. What should do? I tried to install the update to the BIOS on the Toshiba site - the version already is 190.

  Hi idof,.

  It would be useful that post you some information about the operating system and your model of laptop. I can t find in your ad.

  With regard to the FN keys: in your case I would try to update package of added value and utility to Support Flash Cards. It should work :)

• Portege 2000 does not recongnise the run key that I'm going home

  Some how my laptop can not recongnise the race key that I go... (with the help of a friend Comp in now)
  Is there a special function key which toggle the keyboard.

  Using XP sp2.

  Hello

  As far as I know it of not possible to disable the keyboard. With the FN + F9 key combination, you can disable only features of Notepad, but not the keyboard. You can try to connect the external keyboard. If the same problem still images, then you should get you BONES with the recovery CD.

  Best regards

• Spectrum x 360: stupid question relative to the product key

  Hello

  I didn't buy a laptop for a while and last used to have a windows installation CD.

  I got a spectrum X 360, and of course there is no reinstall drive. However I wil get one from Microsoft to be able to perform a clean install after repartitioning etc. However, I was wondering where I can find the windows key that I can use on this new facility

  Thank you

  Hello
  
  The key is in the BIOS of your machine, please use the following tool to get:
  
  http://www.Belarc.com/free_download.html
  
  When running this tool, it produced a report, scroll to the section of software management. Product key Windows is here.
  
  You can also use the following tool to discover:
  
  https://www.magicaljellybean.com/KeyFinder/
  
  Kind regards