Startup message Equium A60 VERIFIER SYSTEM THEN press the F1 KEY

Similar Questions

• Re: Different Windows 7 another pro product key then press the down key

  Hi all

  Why is this?
  Different product under Windows 7 pro key other then the button on the bottom of the laptop.

  I used 2 different tools to recover my product key Windows 7 Pro.
  I have reinstalled this once using a defined recovery DVDs. Using 2 or 3 discs, but I do not remember that I had to enter the key when I reinstalled.

  I used nirsoft ProduKey. Can someone there check pls?
  Mine is a 64-bit system.
  One of my friends bought a laptop with a windows system 7 at home, but the office went to black. I told her check the product key, if it is the same as the bottom of her dressing room, then maybe the seller or someone else has used its product key on another system and Microsoft has taken this key on a blacklist. I don't know, just a possibility.

  I tried to check mine, but it shows me a different key. Checked with 2 tools.

  Thank you

  + The message was edited: link has been removed - unauthorized +.

  Hello

  Laptop Toshiba computers are preinstalled with an image of Toshiba. This isn't a single Windows operating system but a pilot cotaning package, tools and additional software.
  Of my knowledge, the Toshiba preinstalled image is already activated by the factory.
  The same image is used for the entire series laptop and I think that's the reason why the product key of Windows 7 at the bottom of the device is different from the key used in the image.

• Satellite A10 - failed at startup, check the system, then press F1

  Hi, I have this laptop old to repair.

  Main problem is that it starts. Display errors after all start-up:

  -#1 error - broken cdrom IDE
  -Check the system, then press F1 - ppl say it's a low cmos battery
  -File Boot.ini file is missing - is unable to repair itself, so that the CD does not work.

  Now, it looks like this. I turn on the laptop, shows the toshiba welcome screen, then theres the boot.ini of message end missing, begin on c:/windows and bam the phone keeps reseting showing again and again the same error. When I press ESC theres the message check system, then press F1 or IDE #1 - random error.

  If anyone has had this problem, Ive looked on the internet but did not get a decent answer, what to do with these cases.
  Looking forward to some good quality advice :)

  Hey,.

  I think the case is clear: Windows may start t because the boot.ini file is missing. You would be able to repair this file or reinstall Windows, but your work isn't CD player I think you need to replace the CD/DVD drive to get rid of this error.

  Then contact an authorized service provider, or take a look on eBay for second hand parts. Maybe you can find a compatible CD/DVD player that will work.
  Then you can boot from the Windows disc and repair Windows System.

  Of course, you can also restore factory settings using the Toshiba Recovery disk, but as a result, you must work of CD/DVD drive. ;)

• PC Hung and will now restart not [XP Pro SP3]. SYS error at startup as follows; Lsass.exe - system error. The endpoint Format is invalid.

  Original title: PC Hung and will now not restart not [XP Pro SP3]

  PC Gardner - [open Excel, open outlook, being viewed in PDF and word doc being edited].

  Restarted, then - loading SYS error window at startup as follows; lsass.exe - system error. The endpoint Format is invalid.

  Can not very well, or at the end of the message have to turn it off. Tried to reboot several times, same result.

  Just before this happened was a dialogue window appear on my PC, which indicates that Microsoft wanted to investigate problems of software they had observed on my PC that I had not sent the reports to. I approved this request and they took the reports...

  Am currently bimbling turn of safe mode with networking.

  Any smart people able to help me please?

  Thanks George

  Hello

  We will try these steps and check.

  Step 1: Try using some know last good configuration and check.

  Step 2: System Restore from safe mode or safe mode with network.

  Reference:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  Hi iambjan,

  I understand that your MacBook Pro has been lost by the intermediary of find my Mac mode. Fortunately, you can go to the off mode lost through the steps described below.
  

  You can disable the lost Mode by entering the password of the device, or by following the steps below. Alternatively, you can follow the steps below to change the details displayed on your lost device.

  Note: If your credit cards and debit to pay Apple have been suspended because you put your iPhone in lost Mode, when you disable lost Mode and reconnect to iCloud, you can continue using your cards.

  1. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  2. Click on all devices, and then select the device that is lost.

  3. Click on lost Mode, then change the information or lost the stop Mode.

  If you cannot use lost fashion as find my iPhone is not configured on your lost device, see the article by Apple Support If your iPhone, iPad or iPod touch is lost or stolen.

  SEE ALSO
  Remove credit and debit of the portfolio (or book) maps

  iCloud: use lost Mode
  https://support.Apple.com/kb/ph2700

  Kind regards.

• Not ' on' button pressed, then press on + or - keys to adjust the brightness of the screen on HP10BII +?

  Not ' on' button pressed, then press on + or - keys to adjust the brightness of the screen on HP10BII +?

  Just got a new unit, and one of the first things after how to turn it on, in the getting started manual, it's that if we push the button 'On' and then hit the + or - less buttons, it adjusts the brightness of the screen. On my 10BII + does nothing... so I wonder if I have a defective new out of the box. So far, all the rest, seems to work.

  Thanks in advance for everyone would be can confirm it should work.

  I can confirm that the 10BII + adjusting the contrast has very little effect.

  When you look at the screen at a low angle, the number "off" and the lights can be seen to slightly increase & decrease the contrast.

  For normal use, the contrast setting has no useful effect.

  .

• My NEX - L 6 freezes after I turn it on, then press the film. Need to remove the battery.

  I have the NEX-6 with a 16-50 lens and it freezes when I turn it on then press the movie button. If I wait longer before pressing the button, it seems to be OK, but if not, the goal remains unretracted and start and stop again does not help. I have to remove the battery and restart the device. It took me a while to understand why it was freezing upwards, and there is at least one situation where I seen it happen on a regular basis. Does anyone else have this problem? I hope an update of the firmware wouldn't be now, but have not seen.

  No when I turn it on, it gets stuck, like a windows pc stuck with the sandclock or the circle around truning

  Its either a bug software or a problem with the 18-200mm lens, it doen ot havppen with the 16-50mm lens.

  Also, sometimes he will, but refuses to focus, as the engine focum does not report you to turn.

• my computer hp laptop shows "Press the ESC key for startup menu" how to fix it help me?

  HP pavilion g6 mobile app
  product number: LN207EA #ABV
  Serial number: [redacted for privacy].
  Tell me please solution.

  Press the ESC key. In the menu choose F2 System Diagnostics. Test your hard drive & memory.

• Satellite Pro C870-172: how to use the Fn keys by pressing the FN key

  I recently bought a Satellite Pro C870-172 and I found that the FN key is used by default.

  I mean that if I need to use the normal F1 or F2 key, I have to press "FN" + F1 or F2 etc... otherwise I get the function of toshiba. which would be fine, but in a lot of technical programs, I need to use the normal F1 F2... touch!

  is there a way to reverse the default system so that when I press the F1 key, I get the F1 function and when I press FN + F1, I get the toshiba service?

  Thank you

  M2

  Yes, go to the BIOS by pressing F2
  Now switch to the Advanced tab, and then open the System Configuration.
  Here you will see the option called: mode of the function (without pressing Fn first) key
  This option should be disabled.

• By pressing the ENTER key once instead of twice

  Hello!

  I am developing a Login System. I want the user to choose a user name (from the list), and then enter a password (in a text box with "the password display" enabled). I want the user to be able to press ENTER, optionally with a click on the Login button after entering the password.

  I'm doing it with a Structure to the event read the key Down event and using the node Vcle to record key is pressed. (see image below)

  My problem is that the user must press the Enter key twice to something happened. I want that happens on the first click.

  Anyone has any advice?

  Hey PeterPoPS,

  If you right click on the button enter and go to Properties > Navigation key, you can select the toggle property to bind to the key back from there. You can implement the correct mechanical action so that the button is not fixed in this State, such as lock to exit. You can change the action type mechanical button responds with by right-clicking on the control of entry button and navigate through the menu of mechanical Action . If you later want to use this button within a structure of the event, be careful because the mechanical action of locking must be explicitly read and reset through the event.

  This way you can build an event around the change in value of enter key.

  I hope this helps!

  Kind regards

• Press the backslash key shows the start menu, how to stop it from happening?

  Original title: keyboard shortcut

  Hello

  Windows XP system.  Any program I use, when you press the backslash key, the menu Start come.  How can I disable that I can't find a list of shortcuts for this a key operation.
  Thank you.

  It sounds as if you have inadvertently created a "shortcut" that makes the Act key backslash as the Windows key.  Or you may have a faulty keyboard.

  • What happened to your system, just as this behavior started?
  • You have another keyboard that you can try (and Yes, that happens)?
  • What do you use for an antivirus application and is his current subscription?
  • Establishing general principles, download, install, update and run scans with each of these two free tools; do not run the scans at the same time; Let tools delete or quarantine any malware they find; You can uninstall when in fact, if you want to
    MalwareBytes AntiMalware
    SUPERAntiSpyware
  • What is the brand and model of your keyboard?
  • You have a special keyboard installed, for example, Microsoft IntelliType software or "DellTouch programmable keys?
  • You have XP Home or XP Pro?  And what service pack?
  • You can also download and run The key Mapper to verify or reset the mappings of keys.

• try to turn on my system, I wonder the product key to activate my windows

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error messages:-enter the product key for acvtivate your windows now
  • Recent changes made to your computer:-update of my service Pack1 to Pack 2
  • What you have already tried to solve the problem:-looked under my system to get the product key, but he can't see clearly because it is worn.

  * original title - whenever I try to turn on my system, I wonder the product key to activate my windows. How can I get the product key? *

  "olivegold" wrote in message News: 5da77a5c-4 d 85 - 4 FC 2-855e-a7c183a76bd9...

  Hi, I followed your instructions and run the MGADiag tool and here's the report. I hope that you will be able to help out me. Thank you.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 4JJQP - TP64Y-RPFFV
  Windows product key hash: W7I5PeTN2iJuvTTU9QmIXc6iQqY =
  Windows product ID: 89578-OEM-7332157-00043
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003

  OGA data-->
  Office status: 108 VLK invalid
  Microsoft Office Enterprise 2007 - 108 VLK invalid
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  License data-->

  Partial product key: RPFFV
  License status: Notification
  Reason for the notification: 0xC004F032.

  Your Diagnostic report suggests that Vista license store is perhaps damaged or its data can be ruined somehow.  Please try the steps below to re-create the store with the correct data.
   
  (1) open an Internet browser window.
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start slsvc
  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
  (11) restart your computer twice.
  (12) you may need to enter you product key and activate it.
   
   
  However - this is not your problem, as you have also a blocked for Office Enterprise Volume license key.
  This product is only sold to organizations with a large number of machines for use on machines only - if you bought it, then you sold counterfeit software and should demand a refund from the supplier. You will need to get legal, by uninstalling counterfeiting and then by installing a copy legal, purchased at a reputable shop.
   
  HTH
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• hot key cards hidden even when I press the FN key

  hot key cards usually appear at the top of the screen when I press the FN key.  Now the cards remain hidden when I press the FN key.

  Hot key cards on top of the F1 to F12 key board.
  Thank you

  Try this

  Click on the "Start" button and type the flash word in the search field. In the programs that appear on the top, you should see "restart Flash Cards' and 'Settings for Flash Cards'." First, click on "restart Flash Cards", then click "Start" and type the word flash in the search field. " This time, click "Settings for Flash Cards" and make sure that there is NOT a check mark on "Disable all the function keys", click 'Apply' and 'OK '.

  If the above does not go to the Toshiba Support:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Choose your model and download and install the 'Toshiba value added Package"for your system, then restart. On the right side of the page are links to forums of Toshiba.

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• Satellite Pro M40: computer stops when you press the SHIFT key

  Sometimes when I press the shift key it wonder if I want to shut down the computer. It also changes the internet Explorer mode in full screen. When it arrives it will be continually for centuries and then suddenly stop. Then start again. It seems not to happen at any given time. I disabled the hot key in the Toshiba utility and which comes to the top of the Tower stops when I pressed the SHIFT key, it does not give me the option.
  It's really annoys me because I can't just think what to do.

  Thank you

  Hello

  It's very strange. It is the first time I heard about this issue.
  As much as I know the Toshiba utility cannot add additional functions to shift and make this key as a stop button.
  I have gift? don't know if you have installed the 3rd party applications that can change the keyboard feature, but you should check this possibility.

  In addition can also be a defective hardware. Maybe something wrong with the keyboard controller. But of course the diagnostic test is necessary.