regarding the tables

Similar Questions

• No limitation regarding the table of bitmaps?

  I'm working on a game. Previously, I had 13 executives of sprite as separate files and used getBitmapResource to load into an array of bitmaps. It worked well.

  I've upped the number of sprite images to 26 and make them in a single bitmap file with 2 rows of 13 (corresponding to the States of game). I'm trying to load them into an array of Bitmaps - either one or two dimensions. None worked. The last loaded image is one that is displayed, regardless of what I call for. I use Bitmap.scaleInto, in OS5.

  My attempts at debugging continue to wonder if I'm violating a rule, with the berries of the Bitmap. Like, the berries can only work before because of the structure of the .png files? Bitmaps are already in an internal table format that blends in with my paintings?

  I can also have incorrectly implemented the scaleInto, although I'm working with the code for a very good post on this forum. Here is that code, currently configured to use a single dimension table. There are a few more from the referenced post lines, to maintain transparency in the sprite frames.

  class Thing extends OBJ
  {
   static Bitmap[] _mySprite; 
  
   Thing(int passX, int passY)
     {
      super(passX, passY);
  
      // Set bitmaps
  
      Bitmap multi_sprite = Bitmap.getBitmapResource("sprite_64x29.png");
      _mySprite = new Bitmap[26];
  
      Bitmap image = new Bitmap(Bitmap.ROWWISE_16BIT_COLOR, 64, 29);
      image.createAlpha(Bitmap.ALPHA_BITDEPTH_8BPP);
      for (int y = 0; y < 2; y++) {
          for (int x = 0; x < 13; x++) {
              int[] transparentImage = new int[64 * 29];
              image.setARGB(transparentImage, 0, 64, 0, 0, 64, 29);            multi_sprite.scaleInto(x*64, y*29, 64, 29, image, 0, 0, 64, 29, Bitmap.FILTER_LANCZOS);           _mySprite[x+13*y] = image;
             }
         }...
  

  Transparency works. And, if I shorten the loop values, the last loaded picture appears, regardless of what image I try to get out of the table.

  I know that I could skip the drawBitmap preload and only when needed. But I have a lot of code in place that expects to be able to check the dimensions of several bitmaps, in addition to these. And it seems just cleaner to shorten them.

  you re-use the image object, most likely, you end up with a table of the same objects (a table only refers to the object, it does not copy it).

• reach a value of table regarding the APP_USER.

  Hello
  
  I want to extract the value of the Table regarding the APP_USER.
  
  I use
  

  SELECT ID,NAME,FILE_OBJ_ID,MIME_TYPE,DOC_SIZE,BLOB_CONTENT,DESCRIPTION,UPLOAD_DATE,'Download' FROM DUMY_FILE where CREATED_BY =:APP_USER;
  
  Show me error 
  
  failed to parse SQL query:
  ORA-00911: invalid character

  Thank you
  
  Published by: 805629 on January 13, 2011 02:09

  Hello

  Try to remove the semicolon from the query end

  Kind regards
  Jari

• Problem regarding the display of the Table

  Hello
  
  I have a problem with a Table in OAF... According to the condition if we have no action on the Table we should display the same view in the table... (Because let's assume that we are in the fifth of the Table Page, even after the implementation of the action to submit we must stay on the same Page)... now when I play an action after the action is completed, we see the first view (Page) of the Table...
  
  
  Please suggest me what needs to be done on this issue... I saw that the page is refreshed after submit action
  
  
  Kind regards
  Doris

  Hello

  Capture the event associated with the table column and returns the primary key of the row in the params of the event.

  If ("rowevent". Equals (PageContext.GetParameter ("Event"))
  {
  obtain the primary key of this line
  Chain of rowid = pageContext.getParameter ('primary key');
  get the existing lines of the range
  OAViewObject vo = (OAViewObject) am.findViewObject ("vo name");
  Rank [] rows = vo.getAllRowsinRange ();
  for (i = 0; i<>
  {
  Corresponds to the primary key that is captured with all the lines to find the corresponding row
  If ("rowid".equals (lines.getAttribute("rowid").toString (()))
  {
  you get the line on which event has been triggered just out of the loop

  break;
  }

  }

  This way navigation will be won on the same range, as the event is triggered.

  Thank you
  Gerard

• Regarding the dependencies on the tables

  Hi all
  
  We have 2 different databases, of which one is in oracle 11 G and the other is in oracle 9i.
  Now, the company plans to remove the oracle 9i database and move only the necessary imp of the tables in the database 11G.
  
  
  So we have here a set of tables that should be moved... I'm told to find all dependencies at this table... like in that all objects are referring to this table...
  
  
  as I have A table which is referenced by other tables, triggers, and indexes... I need the full info... How can I get for that?
  
  PL/SQL Developer installed on my machine, I have...
  
  
  There is an option that says "referenced by" when I expand the table...
  
  who did?
  
  -Karan

  ALL_DEPENDENCIES and ALL_CONSTRAINTS queries for tables under question.

• stop the email addresses in the table in the spreadsheet to launch mail

  I am compiling of data in a worksheet Numbers and many cells in the table into them from the e-mail addresses.

  Whenever I tap on the cell that contains an e-mail address, he jumps to my Mail application and launches a new mail with the email address. It's so irritating cos I have to type on any address in the table and I DON'T WANT my Mail App to launch. How can I stop this madness? Help, please!

  Hi helix.

  

  Drag the column wide (or Panel Format > table > column)

  

  Click on the white space to the right of the link to select this cell without activating the link

  

  Now, edit

  

  Tested on a MacBook Pro with numbers under Mac OS X El Capitan 10.11.5 3.6.2

  Kind regards

  Ian.

• Numbers: How lock the table without blocking the ability to edit what is inside?

  everything in the title

  Thank you

  Hi Berendirih,

  Is not possible. The lock table prevents changes to the table and its contents.

  Whenever possible, you should separate entry and calculations on their own tables. Lock tables calculation in order to protect the formulas. Leave unlocked data input tables to allow data entry.

  Kind regards

  Barry

• Formulas in the table inside Pages

  In the Pages I inserted a table, which I suppose is a small number as a table.  Column D is set to a formula that simply multiplies columns B and C together.  If I click on a line and insert underneath, then the formulas and cell formatting are not copied down.  How to make this happen automatically?  It's a pain to restore things for each line that I add.

  Hello Gargoyle,

  Tables in Pages resemble the Tables in number. Here is an example with a header line (line 1), a footer line (line 5) and a column heading (column A):

  

  Formula in cell D2

  = Cost each Chair × number ordered the Chair

  Pages by default uses the labels in the header of columns and lines of header as cell references. Numbers (generally) use the column label (A, B, C, D) and line 1, 2, 3, 4, 5) label cell references.

  To fill the formula down from D2 to D4, drag the yellow dot (fill in the neck) down.

  To add another line that contains the formula, click a cell in the option line 4 and press arrow down.

  

  Fill in the details in columns A, B and C

  The formula in D5 calculates the cost of this line.

  Formula in cell D6 footer

  = Sum (cost)

  Created in Pages 5.5.3 on OS X Yosemite 10.10.3

  Kind regards

  Ian.

• create containers in the table of the container in the locals or file globals in teststand through Labview

  Hello

  I'm trying create table containers and in different containers, which contains items with different values.

  For that I use for example Excel file and in it, I create a single table, first line is the element name and second row is the value of the element and even to the third row is also different values.

  I want to create under container in the tables of the container as first line must be the element and the second row's value and after reading the second row his creates the new container because again first row must be the element and third row should be the value of the elements and even for the next row.

  here as an attachment, I tried to do, but how I am not able to create one any container according to the line changes. Please guide me how to solve this problem

  Thank you much in advance.

  Kind regards

  Ankit.

  No, I have not found the right solution for it.

  I posted this in wrong thred, I wanted to just delet this post. but in some way, I have not found where delet.

  That's why I just mark it as resolved, if it is no more worth.

  But in any case here as an attachment it is vi, which is at least capable of create table containers in teststand.

  what I want is to create the table container, and teststand with subcontainers.

  Agin thanks for any help.

• fields of digital type in the table editor can be too small

  Hello

  just a minor inconvenience: depending on the settings of digital numbers may not fully appear in the table editor, refer to the figure below where a digital precision of 15 has been set with scientific notation. Of course, these values are used to display the stepsize in the editor, too... Because it is possible "scroll" the number is not a real problem, but it is not very nice either

  

  Hi Wolfgang,.

  I could reproduce this behavior here on my end. I'll take it then they can handle it for the next version of the CVI.

  Best regards

  Manual

• How to remove columns from the table on the master 1-0?

  I have an array of 96 columns with strings. I also have the array of int 96-elemets (mask) with 1 and 0.

  What I want to do is to is to remove (or hide - but I read that it is not possible) all the columns with index corresponding to 0 in the mask table.

  example:

  columns in the table

  1 2 3 4 5

  mask

  0 1 0 0 1

  I want to remove the columns 1, 3 and 4 and leave only 2 and 5 in my table.

  How can I do?

  If I create loop for with i as the index of the column, when I do DeleteTableColumns() columns number decreases, and I get an error of range out of

  Or do I have an option to hide the unnecessary columns (not set their width to 1, it's very ugly-looking)?

  Please help me (())

  Hello rovnyart!

  1. removal of columns in the table:

  I suspect that the reason why you get the out-of-range error is due to fact that in your loop, you delete the columns in the table, you'll eventually end up by referring to a column that no longer exists, because the other columns before it have been deleted. While you remove each column of your table in the loop for example, the column index number will move, because you deleted the other columns in front of her.

  To resolve this, even if you delete a column in your loop, make sure that you take also into account that the index of the column is moved because of the removed columns.

  2 hide columns in table:

  You can use the ATTR_COLUMN_VISIBLE attribute to hide columns in the table:

  http://forums.NI.com/T5/LabWindows-CVI-idea-exchange/add-attr-column-visible-attribute-for-table-Col...

  http://zone.NI.com/reference/en-XX/help/370051Y-01/CVI/uiref/cviattrcolumnvisible_column/

  3 alternatives:

  Note that another alternative would also use a tree instead, control as the tree control also supports the hidable columns:

  http://forums.NI.com/T5/LabWindows-CVI/table-hide-column/TD-p/569773

  Best regards!

  -Johannes

• Remove the checksum of each row in the table

  Hallo

  I got out as table and since I have just read the data with the checksum

  For example, I have to neglect the last 2 bytes in each row of the table. I tried several times but I can't succeed. It would be nice if someone help me to go around this problem.

  thanking you

  Best regards

  Karine

  Hi Karine,.

  have you tried really 'several times' to remove the last two characters of each string? Using an autoindexing FOR loop?

  

• Edit/delete/add scene coordinates in the table during execution

  Hello world

  I managed to build table allows you to store and record the coordinates of the stage and remind to control steps. However, I need change/remove/add details of scene during execution. I also need to allow the user to directly edit the coordinate from the scene of the array. Wondering what someone knows what is the best way to do it? Or is it better to use the matrix or Cluster? Thanks in advance.

  Best regards

  Han Yen

  Han Yen wrote:

  Thanks much altenbach for all the advice. I tried to do a table 2D control. I've been playing with table in the control. However, I still can't find out how can I detect that I change the data in the table 2D with the more recent issue during execution? How can I then update my current table with the latest data?

  Well, the 2D table is updated immediately and you do not all the other tables.

  Do you mean that you want to update XAbs, etc. where the just changed line is already selected?

  In any case, here's a simple project, perhaps it will give you some ideas. I would recommend using also the tables for XYZPos, entrances etc. and the XYZabs. This simplifies the code because you reduce the number of terminals and table operations.

  Let me know if something is not clear to you.

• Use the table 2D input and output dll

  Hi, I have a problem with table 2D used with library funtion call to get the table of DLL.

  uint16_t is defined as unsigned short, who is unsigned 16-bit in labwindows.

  In the following two codes origFrame.height is 1024, 1280 origFrame.width.

  QCam_Err DLLEXPORT FrameGrab(void* handle, uint16_t frame2D[1024][1280]) {}
  
  uint16_t * p;
  
  p = (uint16_t *) origFrame.pBuffer;
  
  Copy each pixel of the 2D array
  
  for (int i = 0; i)
  
  for (int j = 0; j)
  
  frame2D [i] [j] = * p ++;
  
  }
  
  }
  
  }

  2D array is passed to the DLL in the form table 1 d, I also tried table 1 d below but to get the same numerical results.

  {QCam_Err DLLEXPORT FrameGrab(void* handle, uint16_t *frame1D)
  
  uint16_t * p;
  
  p = (uint16_t *) origFrame.pBuffer;
  
  for (int i = 0; i)<(origFrame.height*origFrame.width);>
  
  frame1D [i] = * p ++;
  
  }
  
  }

  Both of these methods gives me the same numeric result with regard to the numbers in the output array.

  Something interesting is that the output array has the right size, but all the numbers in the table are about ~ 40, while my expected in all values table is 60.  I know, because I use this to get values of a pixel in a camera and I know that the values of the pixels.  I also used the same code in LabwindowsCVI as a normal program built as exe.  Everything works fine and I get my expected values.  So apparently miss me something here, when I changed the settings to make dll.

  What I've done wrong?  Thank you very much for your help!

  Best,

  Charles

  
  

• How to connect the table 1 d to Structure box as a selector of case

  Hi all

  I'm able analog DAQmx Coordinated, I got component (Y) waveform and this component is of data type table 1 d (double-64-bit real) wire, according to my program I have to use the structure of the case, the selector must be values Y but labview said "you cannot connect this type of wire to the case selector (you have connected two terminals of different types).

  Related question work as below:

  Should I continue to move the engine while the analog values (values of Y) is lower than the preset value (for example, "10")

  Greetings from the Turkey!

  Best regards.

  either insert a "Index Board" to address one of the points (first, last, etc.) or take the average, max , or min of the table to make a decision, according to the needs.