Regenerate the Datastore groups every two minutes

Similar Questions

• Windows XP WiFi every two minutes of back and forth!

  I had to use my old Tablet Toshiba with Windows XP Pro.

  The WiFi connection is lost every two minutes, and then reconnect to be lost again in two minutes.
  Thanks for any help or words of encouragement, because this could be taxing on me, but I have to fix it.
  Ralph

  Hello

  1. What is the brand and model of the router?
  2. What is the model of the Toshiba Tablet?

  To resolve the problem, you can download and install the last set of network card drivers on the manufacturer's Web site based on the model number.

  For the troubleshooting steps based on the problems with network problems in Windows XP see the link below.

  http://support.Microsoft.com/kb/870702/en-us

  I hope that helps!

  We know the State of the question.

• Journal alerts receive ADRCI message every two minutes

  Greetings all -.
  
  I get this message about every two minutes in my alert log.
  
  "Use ADRCI or Support established for the packaging of the incident.
  See Note 411,1 to My Oracle Support to error and packaging details. »
  
  She is accompanied by other errors that I deal with.
  
  It seems that by making this suggestion whenever he encounters an error-
  but I'm not in there. One mistake and then I see this message 60 times.
  
  Yes, I know - this is a feature, but it is in my alert log about 58000 times (really).
  
  Any suggestions to stop this annoyance?
  
  BB
  
  Published by: Blues Breaker on June 25, 2012 09:21

  Please see

  http://uhesse.com/2011/06/01/adrci-a-survival-guide-for-the-DBA/

  Rgds,

  Ahmer

• Receive the same email every 2 minutes... over and over again! How do we stop it?

  I received an email about an hour ago, and it is constantly through every 2 minutes. I opened a session on the system of e-mail and online deleted the original e-mail and all of the following conditions, but it is always through. Any ideas?

  He finally stopped when I managed to get the sender to delete the email system. Phew!

• How can I remove the locking the computer? Every few minutes a windows appears on this subject.

  I don't know how this happens - how can I take off the computer to lock? I am the only user and it should always be unlock. Every few minutes, this window appears and makes me nervous.
  original title: how take off locking/unlocking of the computer

  Hi toniclair.

  Try these.

  How to disable the auto-lock in XP Professional.

  http://www.ehow.com/how_5092239_disable-lock-computer-XP-PROFFESIONAL.html

  Disable automatic locking in Windows XP.

  http://www.ehow.com/how_6952223_disable-auto-lock-Windows-XP.html

  Good luck.

• split the data belonging to the same group at two different levels

  Hello
  
  I have data in the same group I want to split into two levels.
  
  For example: If the XML is:
  
  < data >
  Taxable < Type > < / type >
  < value1 > one < / value1 >
  b < value2 > < / value2 >
  < / data >
  < data >
  Taxable < Type > < / type >
  e < value1 > < / 1 >
  f < value2 > < / value2 >
  < / data >
  < data >
  Taxable < Type > < / type >
  g < value1 > < / 1 >
  h < value2 > < / value2 >
  < / data >
  < data >
  Taxable < Type > < / type >
  u < value1 > < / 1 >
  v < value2 > < / value2 >
  < / data >
  < data >
  Taxable < Type > < / type >
  o < value1 > < / 1 >
  < value2 > x < / value2 >
  < / data >
  
  
  The output using the RTF model should be:
  
  Taxable
  a and b
  e f
  g h
  
  Not taxable
  u v
  l x
  
  I can't change the query to add a group.
  
  Kindly, if anyone can help
  
  Published by: user10606061 on 25/06/2012 01:05

  
  

  delete a table with 2 columns and two rows. In the second column of row 1
  
  in column 2
  

  table below
  

  PS: your must be within a root element

• Premiere Pro CC 2015 crashing every two minutes to the new iMac

  My configuration:

  27 "iMac

  i5

  16 GB OF DDR3 MEMORY

  3 TB

  GTX 780M 4 GB

  First new to 2015 installed CC! The project often has effect Gaussen blur on photos and videos! Have the feeling that crash by these effects. already reinstalled computer and all programs! have a macbook with the same version and betriebstystem, everything is perfect! on the iMac is not perfect!

  (from Germany)

  Please pass the Video Renderer software only and check if this solves the problem. [Which would be under file > project settings > General.

  Thank you

  Regalo

• XP SP3 if you use the workstation, it takes two minutes for the system to respond.

  This is a recent development, so my question is what could change because of the long delay?

  When you double-click 'My Computer', your system tries to enumerate all the drives connected to your system.  Among the possible causes for delays are network delays attempts to connect to a server that is inaccessible or not on the network or USB devices.  To limit this, try to disconnect or disable all connections in your network before you open the "my computer".  If it helps the problem, look for a network drive that he might try to connect to.  Another approach is to disconnect all USB devices to see if your problem is improving.  If so, look for a problem with a USB device.

  Also try:
  "Long delay before appear it files in my computer in Windows XP"
    <>http://support.Microsoft.com/kb/819017 >

  HTH,
  JW

• Group by and count in every 5 minutes

  Dear guy,

  I need to recover table data transaction report for the number of transactions sumarizing and the sum of the value in every 5 minutes. Please look below

  Last time	Type		Value
  ---------	------	-----
  12:01:12	buy		10
  12:02:34	pay a		20
  12:04:43	topup		10
  12:05:55	pay a		30
  12:08:34	buy		40
  12:11:21	buy		40
  12:12:46	topup		5
  12:15:50	pay a		30
  12:16:23	pay a		25
  12:19:40	pay a		15
  12:19:50	buy		15
  12:19:59	buy		5

  -get the number of buy and pay a transaction every 5 minutes and the sum of the value

  the result of the will:

  Last time		transaction	number of value
  ---------		------	-----         -----
  12:00-12:05		pay a	1 20
  12:00-12:05		buy	1 10

  12:05 to 12:10		pay a			1		30
  12:05 to 12:10		buy			1		40

  12:10-12:15		pay a	0		0
  12:10-12:15		buy	0		0

  12:15-12:20		pay a			3 70
  12:15-12:20		buy			2 20

  Do you have ideas for this?

  So thank you and enjoy

  Ch

  WITH DATA (last time, TYPE, VALUE)

  AS (SELECT to_date('12:01:12','hh24:mi:ss'), 'buy', 10 double UNION ALL)

  SELECT to_date('12:02:34','hh24:mi:ss'), "billpay", 20 FROM dual UNION ALL

  Select to_date('12:04:43','hh24:mi:ss'), 'charging', 10 double UNION ALL

  SELECT to_date('12:05:55','hh24:mi:ss'), pay 'a', 30 double UNION ALL

  Select to_date('12:08:34','hh24:mi:ss'), 'buy', 40 double UNION ALL

  SELECT to_date('12:11:21','hh24:mi:ss'), 'buy', 40 double UNION ALL

  Select to_date('12:12:46','hh24:mi:ss'), 'charging', 5 double UNION ALL

  SELECT to_date('12:15:50','hh24:mi:ss'), pay 'a', 30 double UNION ALL

  SELECT to_date('12:16:23','hh24:mi:ss'), "billpay", 25 FROM dual UNION ALL

  Select to_date('12:19:40','hh24:mi:ss'), pay 'a', 15 double UNION ALL

  SELECT to_date('12:19:50','hh24:mi:ss'), 'buy', 15 double UNION ALL

  SELECT to_date('12:19:59','hh24:mi:ss'), 'buy', 5 FROM dual)

  -1/1440 is a minute so 5 / 1440 would be 5 minutes

  To_char (SELECT trunc (SYSDATE) + (PIECE * (5 / 1440)), "HH24")

  TO_CHAR (trunc (SYSDATE) + ((CHUNK + 1) * (5 / 1440)), "HH24")

  TYPE

  value

  OF (-piece is the number of periods of 5 minutes since midnight)

  Floor (to_number (to_char(lasttime,'SSSSS')) SELECT / 300) AS CHUNK

  TYPE

  value of MySQL

  FROM THE DATA

  GROUP BY floor (to_number (to_char (last time, 'SSSSS')) / 300)

  TYPE)

  /

  HTH

• Windows 8.1 Flash CC 2014 not sensitive for about 30 seconds every 10 minutes or more... Try the trial version for 30 days.

  I'm trialing CC 2014 to open some files of a facilitator. It crashes all the time for between 10 to 60 seconds. It captures very well once he wakes up to the top, but it happens very regularly and does not seem to relate to a specific activity.

  Meanwhile, it is marked in the Task Manager (not permitted) it doesn't take a huge amount of CPU or disk read/write in this. It happens that I have the network or not connected.

  It's the only thing on my laptop that does this. I installed CS4 and it doesn't have this problem.

  My phone has 16 GB of ram, quad core i7 and solid state of good size with more than 100 GB of free space that can do 550MBps.

  Everyone knows these issues? It is unusable, but it gives me a lot of tea breaks so I guess that's something.

  I know someone who seems to have similar problems on Flash CS6.

  Thank you

  Mike

  Hi Mike,.

  This may be due to the creation of the automatic recovery in the background file. Please note that ASR is enabled by default in the Application preferences and it is configured to create the file recovery every 10 minutes.

  You can disable it by going to Edit > Preferences > General and unchecking the AutoRecover check box, or you can increase the frequency of automatic recovery in order to avoid the frequent shutdowns.

  Thank you!

  Mohan

• Windows live messenger 2009 guard disconnect every few minutes

  My Windows Live Messenger 2009 disconnects every two minutes. What can I do?

  Hi karenbc,

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  Link: http://www.windowslivehelp.com/product.aspx?productid=2

• Vista restarts every 12 minutes, no code error or warning

  Running Vista Ultimate and the system restarts every 12 minutes without warning or messages. Does not restart when you use safe MODE. Run the System File Checker and malware full and nothing turned up. The only change I noticed is that when I click on the mouse, the sound may continue clickings quickly for a second or two.  Nevertheless, the system will restart in 12 minutes.  He did every night around 02:30, then it was every three or four hours and finally every 12 minutes.
  This could be a motherboard problem, or a sound problem? Help!
  Thank you

  Hello

  Did you check the Task Scheduler for an event again?

  While it could be the motherboard, who are usually stops to prevent damage related to heat, no restart. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Internet s DC every 30 minutes - 1 hour for just a few seconds

  Hey everybody.

  I recently had a problem since I reformatted my computer about two months ago.  It happens randomly, most of the time on every 30 minutes to an hour and disconnection only lasts a few seconds and will automatically reconnect. I'm the only computer using this router. My router is a newer router with a built-in modem. I am direct connecting the router/modem for my computer.
  At first I thought the network card on my motherboard was just going bad, so I bought a well known & reviewed internet card. Has worked for a week, now same problem. I tried ipconfig/release, /renew/ and / flushdns - still dc.
  The only other thing I know to try replace the ethernet cable, but I didn't yet. So if you guys have any possible solutions I'd love to try them. Looks like I can't play a game without worrying about dying during disconnection.
  Thank you!
  Cody v.

  Hello

   
  I apologize for the late response.
   
  All changes made to your computer before this problem?
  What is the antivirus installed on the computer?
   
  First of all, I would like to you ensure that it is not all the wireless devices near the router and the computer as microwaves, cordless phones, walls thick, etc..
   
  I understand that you are facing problems with the wireless internet connection. So, I suggest you to follow the following suggestions to solve the problem.
   
  Method 1: First of all, try to follow the steps mentioned below, because this would help you to identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows and see if that helps.
   
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2: Also, please try to follow the steps mentioned in the link below:

  
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7
  
  I hope this helps. If you need help with Windows, let us know and will be happy to help you.
  
  Thank you.

• DASYLab how to write data to a file every 15 minutes

  Hi all

  I use dasylab and datashuttle/3000 to record data. What I want to do is to write data to a file every 15 minutes. I use the milti-file, which can write data to the file diffenret, but how do I control the timing, as the journal data every 15 minutes automatically.

  The other problem is that I use FFT analysis of the frequency spectrum. How can I determine the value of frequency where the peaks that happens.

  Thank you

  Write less data in the file that you have collected requires the reduction of certain data.

  There are three techniques to consider.

  With an average or an average of block - both reduce the data by using a function of averaging, defined in the module. To accomplish the reduction of data, choose block or RHM mode in the dialog box properties, and then enter the number of samples/data values that you want to reach on average.

  Average - when you reduce the data, you also should reblock data using the block length of the change in the output parameter. For example if you enjoy at 100 samples/second with a block size of 64, the average module configured on average, more than 10 samples will take 10 times longer to fill a block. The initial block represent 0.64 seconds, the output block represent 6.4 seconds at a sampling rate of 10 samples/second. If you change the size of output in one block, the program remains sensitive.

  Average block - average values in a block against each subsequent block, where the average is based position. The first samples are averaged, all second samples are average... etc. The output is a block of data, where each position has been averaged over the previous blocks. This is how you will be an average data FFT or histogram, for example, because the x-axis has been transformed in Hz or bins.

  Second technique - separate module. This allows to reduce the data and the effective sampling rate jumping blocks or samples. For example, to reduce the data in 1000 samples / second to 100 samples per second, configure the module to keep a sample, jumping 9, keep one, jumping 9, etc. If you configure to skip blocks, you will not reduce the sampling frequency, but will reduce the overall amount of data in a single block 9, for example. It is appropriate for the FFT data or histogram, for example, to have the context of the correct data.

  Finally, you can use a relay and a synchronization module module to control. For example, to reduce a sample data every 15 seconds, configure a generator module of TTL pulses for a cycle of 15 seconds of time. Connect it to a Combi trigger module and configure it to trigger on rising and stop the outbreak directly, with a trigger value after 1. The trigger output connects to the X of the relay command input.

  In addition to these techniques, you can change the third technique to allow a variable duration using a combination of other modules.

  Many of these techniques are covered in the help-tutorial-Quickstart, as the data reduction is one of the most frequently asked questions.

  In regards to the FFT... use the module of statistical values in order to obtain the Maximum and the Max Position. The Position of Max will be the value of the frequency associated with the Maximum value. The output of the statistics module is a single sample per block. Look at the different FFT sample installed in the worksheet calculation/examples folder.

• I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious.

  Hello.
  I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious. I can't find the settings as it eliminated. Now, I don't have any plug-ins and Add-ons strange that were not initially in the Fox, but the problem is there.
  I use the Fox years. The problem, he had 1.5 months after Fox cleaning. If the problem can't win, I'll be forced to give up the browser, and I wouldn't.

  Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

  If the problem persists in Mode without failure, could reinstall you Firefox in this way:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 38.0.5 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  Any improvement?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins