Register connections Crash

Similar Questions

• Remote Desktop connection crashes computer

  I have a windows xp pro machine used for game servers.

  do not really need to do much with it except from time to time to update programs, so I connect to it the using connection since a ultimate win7 remote desktop machine and an another win xp pro machine.  everything works very well for more than a year.

  recently, I had several problems; the box was hacked, but it doesn't seem they did anything except create a userid and snooping.  I have (actually deleted) patched the problem (winamp) and all was well again.  I say this only for the sake of completeness, but don't think that this is relevant

  fast-forward a few months, and one of the drives falls out of the raid mirror.  I ran a repair on it and it seemed ok.

  then all of a sudden, when I now try to connect, it blocks the machine, I am trying to connect to, constantly.

  any suggestions?  I need this machine to accept remote connections, and in any case stop crashing when someone tries.  I have done a ton of anti-malware analysis, using a dozen programs different in case, but didn't find anything.  the daily program is microsoft security essentials, but I run several scanners/cleaners and found nothing.

  also ran ccleaner just in case it was something registry

  any suggestions on how to fix this?  is there a method to reinstall this function or?

  a single note; I CAN remote in the other computers on my win7 ultimate box, so it's certainly that a target of winxp machine.

  IM lost at this stage

  Thank you

  brand

  [edit] I did a full scan with several software products malware/anti-virus (including malwarebyes, spyware, microsoft security databases Dr.) and nothing found.

  also custom restoration system for some reason, so I can't go that route

  and I tried Office remotely to control another computer, and that works fine, so its only when the computer is a target

  Hello

  ·        The computer crashes upwards or it does not restart?

  If it then restarts, it's probably a blue error screen. I suggest you to disable the auto restart and reproduce the problem. If it you encounter a blue screen then, let us know the exact error message and code. To disable automatic reboot follow the steps mentioned below.

  a. right click on my computer and then click Properties.

  b. click on the Advanced tab.

  c. under Startup and recovery, click settings to open the startup and recovery dialog box.

  d. clear the checkbox automatically, restart and then click OK, the number of times required.

  e. restart your computer so that the settings take effect.

  I also suggest you to check the event logs. Follow the steps mentioned in the article below.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Remote Desktop connection crash!

  Hello

  I use win xp sp3

  I have 3 computer on my home network.

  I got problome 1 computer when I try to connect remote desktop connection the computer crash and writes to me:

  BCCode: 1000007f BCP1: 00000008 BCP2: 80042000 BCP3: 00000000

  BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1

  Please help me!

  Hello

  I had a similar problem in the past and found that the problem started when I installed Log Me In on the host computer.

  Has not solved the problem by removing only, I had to remove the Log Me In graphic card in Device Manager.

  Conclusion, the graphics card in Device Manager must have one and only good driver. Re-install the driver can also help if you have only a list.

  Good luck!!

• Creative Cloud connection crashes, MUSE does not load

  Today, after 4 months, apps CC each requires a sign-in, CC app crashes after login or request still once, MUSE reports an error and not laod at all!

  Help

  Hi Melnoz,

  I'm sorry for the problems faced by you.

  Could you try to close the cloud creative app and the removal of the opm.db of the file of the slot location.

  Win: C:\Users\\AppData\Local\Adobe\OOBE

  Mac: \Library\Application Support\Adobe\OOBE

  It shows how to access the directory on Mac if you need
  Iles.html http://helpx.adobe.com/x-productkb/Global/Access-Hidden-User-Library-f

  It should invite you to you reconnect & solve

  OR

  Please check this linkhttp://helpx.adobe.com/x-productkb/policy-pricing/account-password-sig n-State and if this does not help, then click on Chat contact button our Adobe now support team and they will solve the problem.

  Kind regards

  Baudier

• ZTE a219a does not connect crashes upward on obtaining IP address

  I have a linksys router. I rebooted the router and the ZTE. I disabled my firewall. I don't know what else to try. He just hangs up on obtaining IP address...

  I upgraded the version of the firmware on my linksys router and that did the trick. My router is a few years old.

• Nightly Ubuntu connects not with Ubuntu 11.10 3.0.0 - 17-generic, but firefox 11.0 kernel is still working in the same kernel version (the source of the problem since 3.0.0 - 16A gave no problem)

  Every night of Ubuntu does not connect (crashes and doesn't stop not withouyt one kill pkill or root) with Ubuntu 11.10 and the recent 3.0.0 - 17-generic kernel

  11.0 Firefox still works in the same kernel version and I use it now. The source of the problem is perhaps the core Ubuntu since 3.0.0 - 16 core gave no problem

  Hello

  Please also check if this happens in a new profile. If the new profile is correct, you can later copy the necessary personal data of the old profile. Firefox stores your personal data and settings in a different location (folder profile) separated from its files/folder. A new profile would default Firefox settings (Tools (Alt + T) > Options, and topic: config ) and usually also would be vacuum of Extensions and themes (appearance) in tools > Add-ons) and their parameters. In addition, a new profile would have no previous website stored data/settings etc, (Tools > clear recent history).

  Profiles Howto

  Files & profile folder

  Subject: config entries

  You may also be able to find useful info here.

• I lose my internet connection, reset network adapter internet works for a few moments and everything happens again

  Hello

  OVET the past 2 weeks, my internet connection crashes. I'm going to dianose and the repair center and get a message 'reset with network adapter' and I press OK. In a few minutes, the internet comes back on that lose the connection again in time. Sometimes, when this happens, I get a message that says "there may be a problem with your DNS" and that windows cannot automatically resolve the problem and communicate with my admin or ISP provider. I contacted my ISP everything is good at the end and I even bought a new router but still lose the connection.

  I updated the driver for the network adapter, reset it and also clicked the 'allow PC turns off to save power"in the Device Manager field. I also unplugged the router and went directly from my modem to the computer.

  I have a s 530 Dell Inspiron and am using a cable ethernet to the modem/router.

  IM losing my mind here...

  Any help?

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Do you have these drivers directly from Dell?

  http://support.Dell.com/support/downloads/index.aspx?s=BSD&c=IQ&l=en

  Reference Dell Drivers, manuals, etc. is at the link above.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Internet connection freezes

  I am in India. I use BSNL broadband connection. I use ADSL modem to connect to internet and I connect my PC via wi - fi. I am currently using windows 7 and I am facing a problem in the present. Sometimes my Internet freezes. It happens while I'm downloading something (using the Internet Download Manager) and watching videos on youtube. I use google chrome for browsing. As when the internet connection crashes, I see the icon "Network and sharing Center" in the notification area. It shows "BSNL Internet access" (BSNL is the SSID). This means that I have the internet connection. First of all, I doubted that there could be a problem with the modem or the service provider. But the internet began to work again right after restarting my PC but no modem. I was a little confused. When I faced the same problem again, I just changed my mobile wi - fi and I could access the internet, but not in my PC. So I got to the conclusion that the problem with my PC. I hope you have understood my problem. Please give me a solution. and... Sorry for my bad English!

  Uninstall Optimizer Pro Updater by selecting Start, Control Panel, programs and features. Place the cursor on Optimizer Pro Updater and choose uninstall.

  You have bad sectors on a hard disk called disk 2, which I consider to be an external drive that was not connected to the computer when you have got a copy of the system information file. Run chkdsk on the drive.

  Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f/r" (you will need to connect the drive and replace it with the letter of the drive C) without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.

  Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.

  If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.

  However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.

• Subversion with CS4-> crash

  Hi people,

  I have a big problem with the help of subversion in Dreamweaver CS4. Every time when I want to test Dreamweaver connection crashes.

  For example I type as 'a' server, leave all other fields blank and click on the test button-> Crash!

  Here's the windows error report:

  Problemsignatur:
  Problemereignisname: APPCRASH
  Anwendungsname: Dreamweaver.exe
  Anwendungsversion: 10.0.0.4117
  Anwendungszeitstempel: 48c874b4
  Fehlermodulname: libapr - 1.dll
  Fehlermodulversion: 1.3.0.0
  Fehlermodulzeitstempel: 48698bd7
  Ausnahmecode: c0000005
  Ausnahmeoffset: 0000832c
  Betriebsystemversion: 6.0.6002.2.2.0.256.6
  Gebietsschema-ID: 1031
  Zusatzinformation 1: fd00
  Zusatzinformation 2: ea6f5fe8924aaa756324d57f87834160
  Zusatzinformation 3: fd00
  Zusatzinformation 4: ea6f5fe8924aaa756324d57f87834160

  I use Windows Vista Business (64-Bit) Edition.

  Please help me!

  Welcome,

  Terrux

  Unfortunately, it is a known problem. I worked with an engineer from Adobe for a few weeks on this issue.

  The problem seems to be using Subversion 1.6.2. Dreamweaver CS4 uses the Subversion 1.4.5 client library that is not compatible with SVN 1.6.2. The only solution at the moment seems to be to use Subversion 1.4.5 or earlier.

• How delite gmail info left in firefox

  My firefox always delited my gmail info when I stopped him.
  Now when I open a fresh firefox window and go to gmail log in my account dashboard and email address name appears the only thing left to add is my password. I don't want this info left in my browser once I close it should empty all the info. How can I get rid og gmails remains of information.

  It seems more likely that Google uses a cookie to identify you. Which wouldn't surprise me, as many sites use cookies for this. You can block individual sites to store cookies, or have them expire when you shut down and restart Firefox in a new session.

  While you look at any page on Google.com, check the permissions of the Page Info dialog box Panel using one of these:

  • Right click on the page > View Page Info > permissions
  • (menu bar) Menu Tools > Page Info > permissions
  • Click the icon of padlock or globe to the left of the address of the site > additional information > permissions

  Scroll down and find approval "set Cookies, uncheck the box to use the default value and select"Allow for Session"instead of"allow ".

  Note: Unfortunately, as a side effect, the boring blue bar also reappears whenever you use Google search.

  Firefox has also two types of memory of form: connections and everything.

  (1) with the change to Gmail from a standard username + password to show just the username, registered connections are probably not relevant here. But you can check the list of saved passwords just in case. You can view and delete stored here connections:

  "3-bar" menu button (or tools) > Options > Security > button "saved passwords".

  (2) the other fields can be recorded in the history of the form. Normally, this would not be met automatically, but appears in a drop-down field when you click or type in.

  This feature can be disabled on the confidentiality of the Options panel using the box ' Remember search and form history:

  "3-bar" menu button (or tools) > Options > privacy

  If the sign says "conservation rules: remember the story" impersonated "Using the custom settings for history" to reveal the box

  Unlike the saved passwords, Firefox is not a built-in editor for seized form AutoComplete entries and does not has a block in situ for the recording of entries of the form. Unfortunately, it's all or nothing.

  You can remove the form entry recorded when it appears in a form field using the keyboard: press the arrow down to select and then the delete key. But it can still be saved.

  There are some add-ons for clean saved previously entered form AutoComplete entries and perhaps even to block the economy for some sites, such as:

  https://addons.Mozilla.org/firefox/addon/form-history-control/

• can not send messages, all voices or even see my online contacts

  
  

  Answering my own post... because nobody doesn't want to (or can) help... After hours of debugging, it seems that Skype use an old deprecated command to close the internet connection crashes when you use ICS.

  so, to solve this problem:

  DISABLE 'SHARING of INTERNET CONNECTION"on your properties of NIC... hell, it pisses me off.

• Password protected HD installed in a Cabinet. What are the procedures I need to access it?

  Lightning zapped a supply of computers.  Expensive to replace so I had the password protected HD installed in a Cabinet, but now I can not in HD.  What are the procedures to overcome having to put the password.  The HD casing is connected to another computer.  In the past I was able to access the HD but the computer to which it was connected crashed and I had to reinstall the operating system.  Now I can not access the HD.  Help!

  As explained in TechGeek2, your question is 'ownership' of the files.  The procedure to which refers the TG2 is explained here--> http://support.microsoft.com/kb/308421

• I lost my password for E2000 (not the WEP key or the WPA password)

  Well, the computer on which I got cisco connect crashed. I got a new computer and I am trying to install Cisco connect using the downloaded version and I can't install it because he wants the password of the router, which I do not know. It's because I lost the copy of CD of Cisco connect. I tried to reset the router itself by pressing the Red reset button, which is not good. I'm looking for any solution. It's a Linksys E2000 and I think that the password is initially by default (random, I know that much)

  Rule the 30-30-30 reset.

  check this http://www.dd-wrt.com/wiki/index.php/Hard_reset_or_30/30/30

  then try entering the name of default user and PW. Who are the two 'admin' (small caps and no citation)

• VPN on Cisco 1841 router

  Hello

  I need to configure the vpn site to site on router cisco 1841, but the problem is that the router does not recognize the crypto comand.

  R1 #conf t
  Enter configuration commands, one per line.  End with CNTL/Z.
  R1 (config) #crypto?
  % Unrecognized command
  R1 (config) #crypto?
  % Unrecognized command
  R1 (config) #c?
  call call-history-mib id-carrier cdp
  chat script class-card clock SNC
  config-register connect plan control configuration

  R1 (config) #crypto isakmp policy 1

  ^
  Invalid entry % detected at ' ^' marker.

  R1 #sh worm
  Cisco IOS Software, 1841 (C1841-IPBASE-M), Version 12.4 (1 c), RELEASE SOFTWARE (fc1)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2005 by Cisco Systems, Inc.
  Updated Wednesday 25 October 05 17:10 by evmiller

  ROM: System Bootstrap, Version 12.3 T9 (8r), RELEASE SOFTWARE (fc1)

  the availability of CS-Khatlon-opio-01 is 2 days, 23 hours, 13 minutes
  System returned to ROM of charging at 16:07:44 TJK Friday, November 7, 2014
  System image file is "flash: c1841-ipbase - mz.124 - 1C.bin.

  Cisco 1841 (revision 6.0) with 114688K / 16384K bytes of memory.
  Card processor ID FCZ102110NQ
  2 FastEthernet interfaces
  Configuration of DRAM is 64 bits wide with disabled parity.
  191K bytes of NVRAM memory.
  31360K bytes of ATA CompactFlash (read/write)

  Configuration register is 0 x 3922

  Please help, how to set up vpn?

  Hello

  According to this output is more than clear that you do not have a k9 license applied to this router, this license will enable the security features on your IOS, in this case, you will need a permit of k9 with an activation key, and then you will be able to have available on your device encryption controls. Once you have that we can work on configuring site to site.

  Do not forget to rate!

  David Castro,

  Kind regards

• How to get the host name of the physical computer inside a virtual machine until the user logs in Windows?

  I don't know if this is the right place to post this question, I develop software to support VMWare PCoIP and need to know how to get the host name of the physical machine (which manages the virtual machine and View Client) within a virtual machine before the user logs in Windows of the virtual machine.

  I understand there are two ways to read the host name, via the HKEY_CURRENT_USER\Volatile Environment registry and environment variables, but they are available once the user is connected. I need info before the user connects.

  Is there a VMware API that can be called or asked the host name?

  Thank you.

  Not on the broker, but there are the startup scripts to log on to the computer virtual itself: http://pubs.vmware.com/view-52/topic/com.vmware.view.integration.doc/view_integration_startsession_script.9.2.html

  Note that these executed when a virtual desktop computer allocated connection, not to the point that the client connects - it is possible for the customer to not complete the connection (crash, cancel, network failure) and so any what solution you design must handle this.

  Mike