Register of the firewall of oracle audit vault server on database

Similar Questions

• SYS. FGA_LOG$. LSQLBIND location in Oracle Audit Vault

  When Oracle Audit Vault 12.1.1 collects info SYS check. FGA_LOG$ LSQLBIND column of the table, where can we find these values in the Oracle Audit Vault 12.1.1 repository?

  This is a bug. It is fixed in AV 12.1.2

• Installing Oracle Audit Vault 12.1.2

  Hello

  I try to install Audit Vault 12.1.2 using RHEL5 and virtualbox.

  Installed virtualbox VirtualBox - 4.3 - 4.3.16_95972_el5 - 1 on Linux 2.6.18 - 398.0.0.0.1.el5. In virtualbox, I chose the type of operating system like Linux and Oracle 64-bit version. When I try to start the virtualbox with Audit Vault .iso image, the installation is not progress and hang with the message "P11X4: 100% not native mode: will probe IRQS later."

  Please advice if the environment/method mentioned is supported for the installation of audit vault.

  Thank you

  Sisi

  I had trouble not clear with VB 4.3.16.

  I use VB 4.3.12. I had no problems installing AV on this version.

• Dblink Oracle to sql server, multiple database on the same server sql under a dblink

  Hi, we managed to set up an Oracle dblink to sql server and retrieve data.

  The user of sql server have been using via dblink has access to multiple databases on the same sql server

  But the question is how in oracle (if possible) prepend you the SQL access to this?

  For example:

  Sqlserver_prod has the user sqlserver_user which seems to be set up as default database sqlserver_db1

  But we have select access to sqlserver_db2

  all work well as sqlserver_user

  Select * from table_fromdb1

  Select * from dbo.table_fromdb1

  Select * from sqlserver_db1.dbo.table_fromdb1

  as does

  Select * from sqlserver_db2.dbo.table_fromdb2

  more in Oracle

  Oracle_db a dblink sqlserver_prod. World connection sqlserver_user

  everything works fine

  Select * from 'table_fromdb1"@sqlserver_prod '.

  Select * from 'dbo '. "table_fromdb1"@sqlserver_prod

  But how to (if possible) access from oracle

  sqlserver_db2.dbo.table_fromdb2

  without having to create a new sqlserver_db2_user referenced in a new dblink

  If oracle for oracle would be

  Select * from remote_oracle_schema.table@remote_oracle_db

  Hello

  You cannot select a table in a different SQL * database server from that to which the gateway instance connects.
  As stated in the documentation-

  Oracle® database gateway

  Installation and Configuration Guide

  11g Release 2 (11.2) for AIX 5 L Based Systems (64-bit), HP - UX

  Itanium, Solaris (SPARC 64-Bit), Linux x 86 operating system,

  and Linux x 86-64

  In the section.

  The example SQL Server multiple databases: Configuration of the modem router

  A separate instance of the gateway that is required for each SQL Server database. Each

  instance needs its own Gateway system ID (SID).

  ==========

  You will need to create a new instance of the gateway for the SQL * Server DB2 as well as a link separate db.

  Kind regards

  Mike

• DB Link using the gateway to Oracle to SQL server 2005

  Hi all
  
  I am facing problems to configure the gateway for Oracle database to connect to SQL server, given below are details:
  
  Machine has
  ----------------
  OS = Windows server 2008 R2 64 bit
  DB = Oracle 10.2.0.5 64-bit
  
  content of C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\*tnsnames.ora*
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = WIN-G9TJ5GM2SAO)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )
  
  dg4msql =
  (DESCRIPTION =
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = 10.1.87.119)
  (PORT = 1521)
  )
  (CONNECT_DATA =
  (SID = dg4msql))
  (HS=OK))
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  Machine B
  ----------------
  OS = Windows Server 2003 32-bit
  DB = SQL Server 2005 32-bit
  Gateway = Gateway Oracle 11 g 32 bit
  
  Content of C:\product\11.2.0\tg_1\dg4msql\admin*\initdg4msql.ora*
  
  HS_FDS_CONNECT_INFO = localhost:1433 / / SDÉS
  HS_FDS_TRACE_LEVEL = OFF
  HS_FDS_RECOVERY_ACCOUNT = RECOVERY
  HS_FDS_RECOVERY_PWD = RECOVERY
  
  Content of C:\product\11.2.0\tg_1\NETWORK\ADMIN\*listener.ora*
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = eZeePay-DB)(PORT = 1521))
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  )
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = dg4msql)
  (ORACLE_HOME = C:\product\11.2.0\tg_1)
  (PROGRAM = dg4msql)
  )
  )
  
  ADR_BASE_LISTENER = C:\product\11.2.0\tg_1
  
  On computer A, if I use TNSPING it gives below error
  
  C:\users\administrator > tnsping dg4msql
  
  AMT Ping Utility for 64-bit Windows: Version 10.2.0.5.0 - Production on 12-MAR-2
  012 11:44:12
  
  Copyright (c) 1997, 2010, Oracle. All rights reserved.
  
  Use settings files:
  C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
  
  AMT-03505: failed to resolve the name
  
  
  Please please help what's not in configurations!
  
  Best regards!
  
  Irfan
  
  Published by: irf_mas on March 12, 2012 12:47 AM

  Hello Irfan,
  As far as I can see the correct air configuration files, but you can check a few things-

  1. they may have been lost when posting in the forum, but can do you that there is a space at the beginning of each line in the tnsnames.ora and listener.ora except for the first line of each section-

  ORCL =

  dg4msql =

  EXTPROC_CONNECTION_DATA =

  LISTENER =

  SID_LIST_LISTENER =

  2. What is in the file sqlnet.ota on the computer has?

  3. host 10.1.87.119 is the machine eZeePay-DB?

  4 is the gateway listener began the eZeePay DB?

  Kind regards
  Mike

• Sort of the differences between Oracle and SQL Server

  Hi all
  
  This question is linked by both Oracle and SQL Server
  
  I have a requirement where I want to compare 2 tables line by line. A table is in Oracle and other table in SQL Server
  
  And suppose that both tables do not have a primary key. Now when I sort records by using the order by clause for a column, then-
  
  Rows with null values in that column of Oracle are placed in the background.
  When that rows with null values in the same column in SQL Server are placed right at the top.
  
  How can I make one of them to behave like any other.
  
  My only goal is to have same order of lines in Oracle and SQL Server tables so that I can compare line by line.

  YADQ: Yet another Doc Question

  Can you please avoid them?

  Take your SQL reference manual, search for the ORDER BY clause and notice that it has
  NULL FIRST or LAST values NULL values.

  ------------
  Sybrand Bakker
  Senior Oracle DBA

• The creation of Oracle 11 g DSN for database on another server

  Hello

  How to create a database of Oracle 11 g DSN for a database that is lying on another server? I tried to use the Microsoft ODBC Administrator tool, but it gives me options only for databases on my own machine.

  Hello

  Check this thread can help you https://forums.oracle.com/thread/2479208

• How to start the Audit Vault (Please run this command at the Vault review officer)

  Hi all.
  I just finished to complete a facility audit Vault on a dev linux system and all processes were available.
  
  In any case I had to restart my linux machine, but no process started automatically :(
  
  I'm reading how to start 'something'... by the use of the (e13841.pdf) Administrator's Guide...
  but without results...
  I don't know (I want to say I still have not found in the doc) sequences correct to start and stop services... when start the database... If there is a command to automatically audit Vault start the database...
  
  I tried...
  [oracle@auditvault ~] $ avctl show_oc4j_status
  AVCTL began
  Please run this command at the verification officer Vault.
  Leaving the control Audit Vault
  [oracle@auditvault ~] $ avctl start_oc4j
  AVCTL began
  Please run this command at the verification officer Vault.
  Leaving the control Audit Vault
  
  Thanks for your help

  Here are some actions you need to perform:

  Audit Vault Server you installed in your machine in ORACLE_HOME1
  You have installed Audit Vault Agent in your machine in ORACLE_HOME2

  1 / your database from ORACLE_HOME1

  export ORACLE_SID = yoursid
  sqlplus / as sysdba<>
  startup
  output
  EXPRESSIONS OF FOLKLORE

  2 / the AV from ORACLE_HOME1 Server

  avctl start_av

  3 / the agent runtime from ORACLE_HOME2 AV

  avctl start_oc4j

  4 / your agent from ORACLE_HOME1

  avctl start_agent - nom_agent

  At this point, you should be able to start any collector that you created previously. Be in command line mode, ORACLE_HOME1, or through the web console...

  Yves

  Published by: yves77 on May 14, 2009 19:21

• Unable to connect to DB - Audit Vault 12

  Hola!
  El Audit Vault work Quebec brought recover las options of rooms (auditing settings) of the base of an auditar, me da than no a1 you can at the base. (Unable to connect to DB)
  
  Estoy hablando del punto ' step 1: retrieve the Audit settings for the Oracle Database.
  
  Someone can help me?
  
  Saludos
  
  The host registered, el audit trail esta arriba esta El well conecta, pero el work mentioned antes y da error...

  Hello:

  Assuming you are using Audit Vault and 12.1 database firewall, as indicated in the title of your post, there could be some issues to look at.

  First, be aware that auditing settings are retrieved not the officer, but directly from the Audit Vault server. Thus, you must ensure that the Audit Vault Server can communicate with the target you want to retrieve Audit settings of. This means that, if there is any firewall network between the two, you must allow traffic on the listening to the flow port.

  Second, you must make sure that the host specified in the target location field cannot be resolved from the Audit Vault server. If, for example, your target location is something like 'jdbc:oracle:thin:@//a.b.c.com:1521/mydb', then the AV server must resolve a.b.c.com to an IP address. Usually this by configuring DNS name resolution in the Admin interface under settings-> Services.

  I hope this helps.

• Failing 10.2.3.2 patch audit Vault on AV AV Configuation Assistant Officer

  Hello
  
  Applying 10.2.3.2 patch Vault check on top 10.2.3.0 Audit Officer of Keystone. Get the following error after installing 100% Audit Vault Configuation Assistant components
  
  Installxxxxxx.log information
  
  OPatch succeeded.
  
  INFO: Setup Wizard "Oracle Audit Vault Agent unique Patches ' succeeded
  INFO: Command = oracle.av.common.AvcaCfgPlugIn /oracle/app/oracle/product/10.2.3/av_1/bin/avca s initialize_agent - nom_agent agent_hmrac2 - agentusr ${s_agentusr} agentport - 7016 - av HMCSPV0921. HIGHMARK. INTRA:1522:AV. HIGHMARK. INTRA - rmiport 3121 - 3300 jmsport
  
  INFO: Setup Wizard "Oracle Audit Vault Configuration Wizard" managed
  NEWS: All the tools have been executed successfully
  INFO: The ' / oracle/app/oracle/product/10.2.3/av_1/cfgtoollogs/configToolAllCommands ' script contains all of the commands must be executed by the configuration wizards. This file can be used to run the outside YES configuration wizards. Note that you may need to update this script with passwords (as applicable) before running the same thing.
  -----------------------------------------------------------------------------
  CAUTION:
  The following configuration scripts must be run as user 'root '.
  #! / bin/sh
  Running the #Root script
  /Oracle/app/Oracle/product/10.2.3/av_1/root.sh
  To run the configuration scripts:
  1. open a terminal window
  2 log in as 'root '.
  3. run the scripts
  4. return to this window and click 'OK' to continue
  
  INFO:
  End of the Installation Page *.
  The arch Agent Audit Oracle 10 g installation succeeded.
  WARNING: Do you really want to leave?
  INFO: User selected: Yes/OK
  
  INFO: The OUICA command is issued from oracle/app/oracle/product/10.2.3/av_1/oui/bin/ouica.sh.
  -----------------------------------------------------------------------------
  
  *"/Oracle/app/Oracle/product/10.2.3/av_1/cfgtoollogs/configToolAllCommands* performed a following order and successful.
  
  [oracle@HMCSPS02 Yes] $ cat ' / oracle/app/oracle/product/10.2.3/av_1/cfgtoollogs/configToolAllCommands '.
  # Copyright (c) 1999, 2009, Oracle. All rights reserved.
  /Oracle/app/Oracle/product/10.2.3/av_1/bin/AVCA apply_patchset
  
  [oracle@HMCSPS02 Yes] $ echo $ORACLE_HOME
  /Oracle/app/Oracle/product/10.2.3/av_1
  
  [oracle@HMCSPS02 Yes] $ sh /oracle/app/oracle/product/10.2.3/av_1/bin/avca apply_patchset
  Deployment to standalone OC4J...
  Restart the agent...
  Agent restarted successfully.
  
  Retried component has failed but once again. That's why root.sh run and clicked on the Next"" button. then message received as "Agent 10.2.3.2 Installation was successful, but some of the missing components, skipped or canceled that can operate properly."
  
  my client update patch has succeeded or what is the solution?
  
  Any help on this would be appreciated...
  
  Kind regards
  Manish

  Manish H:

  As far as I can tell by the newspapers, the application of the 10.2.3.2.0 really successful updated patch. Why do you not?

• Audit Vault 12 c without OS install

  Hello

  Is it possible to install Oracle Audit Vault 12 c as a stand-alone software must be installed in any system OEL existing as previous versions?

  Everywhere I see AVDF installation with an operating system.

  Good guide to want if there are of these ways to do.

  Kind regards

  Robert

  Hello

  It is not possible. AV is intended to be installed on a machine "bare metal". It already contains parts of Linux operating system.

• Unable to make the connection with oracle (database sqlserver) non-oracle

  We are unable to connect with the database of sql server after you have created the dblink to the oracle server.

  tnsping everything works very well between the oracle and SQL Server for database, database

  Please provide us with the solution for this problem.

  The problem is that the HS_FDS_CONNECT_INFO in theinit .ora bridge was not properly configured.

  Using the format-

  HS_FDS_CONNECT_INFO =//.

  has permits the connection works.

• get the version of oracle

  Y at - it an easy way to return the version of Oracle from a server.
  
  I don't know dbms_db_version.version but that returns me only the first issue
  That is to say
  
  SET SERVEROUTPUT ON
  EXEC dbms_output.put_line (dbms_db_version.version);
  11 < < == response
  
  I also know that I can do somehting like this
  
  Select selection * v $ version where banner like 'Oracle % ';
  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production < < == response
  
  Can I use probably sed to parse 11.1.0.7.0
  
  Is there an easier way to obtain this value 11.1.0.7.0 with a query? If so, would someone mind sharing. Yes, I want the
  back to the full version.
  
  Thank you

  You can try:

  SELECT version FROM v$instance;
  

  I hope this helps!

• incompatible Oracle R Enterprise Server

  I installed ORE 1.4.1 with DB Version 12.1.0.1.0 - Linux 64 - bit and Windows 7 client.

  The ore package version is the same on the client and the server (1.4.1) - see below:

  Server installation

  > sessionInfo()

  R version 3.1.3 (2015-03-09)

  ....

  attached basic packages:

  [1] statistical methods grDevices utils datasets basic graphics

  Other attached packages:

  [1] ORE_1.4.1 ORExml_1.4.1 OREpredict_1.4.1 OREdm_1.4.1

  [5] lattice_0.20 - 31 OREmodels_1.4.1 OREeda_1.4.1 OREgraphics_1.4.1

  [9] OREstats_1.4.1 OREembed_1.4.1 MASS_7.3 - 40 OREbase_1.4.1

  load via a space of names (and not fixed):

  [1] arules_1.1 - 6 DBI_0.2 - 7 grid_3.1.3 Matrix_1.2 - 0

  [5] OREcommon_1.4.1 png_0.1 - 7 ROracle_1.1 - 12 tools_3.1.3

  Client installation

  > sessionInfo()

  R version 3.1.3 (2015-03-09)

  ...

  attached basic packages:

  [1] statistical methods grDevices utils datasets basic graphics

  Other attached packages:

  [1] ORE_1.4.1 ORExml_1.4.1 OREpredict_1.4.1 OREdm_1.4.1

  [5] lattice_0.20 - 30 OREmodels_1.4.1 OREeda_1.4.1 OREgraphics_1.4.1

  [9] OREstats_1.4.1 MASS_7.3 - 39 OREembed_1.4.1 OREbase_1.4.1

  load via a space of names (and not fixed):

  [1] arules_1.1 - 3 DBI_0.2 - 7 grid_3.1.3 Matrix_1.1 - 5

  [5] OREcommon_1.4.1 png_0.1 - 7 ROracle_1.1 - 12 tools_3.1.3

  on ore.connect I get the error and the connection is not

  > ore.connect (user = "RQUSER", service_name is "...", "host ="...", password ="...", all = TRUE)

  Loading required package: ROracle

  Loading package perl: DBI

  Error: incompatible Oracle R Enterprise Server

  >

  Https://docs.oracle.com/cd/E57012_01/doc.141/e57006/toc.htm#ORERN102 I see that ORE 1.4.1 is compatible with R 3.1.1

  So this could be the problem? My version of R is 3.1.3...

  Thank you

  Jaromir Nemec D.B.

  Jaromir,

  I agree with Brendan.  The error "Incompatible Oracle R company serving" indicates the version of Oracle R Enterprise on the server is different from the version of Oracle Enterprise R on the client.

  You can check the version of ore by running this command in r:

  R > packageVersion ("ORE")

  Sherry

• Unlike char in ORACLE and SQL SERVER

  Hello gurus,
  
  I tried to querying data from Oracle to sql server through linked server, but get me an error! set length corresponds to the error! I know there are CHAR data type in sql server and thus as in oracle.
  
  But when I use the CAST FUNCTION with CHAR it works fine
  

  -- error code 
  
    select * from openquery( linkoracle11 
             select  col1, col2, col3 from test_table )
  
  
  -- say col3 char(1)   -- data type

  ---
  
  

  -- working code 
  
    select * from openquery ( linkoracle 11 
             select  col1, col2, cast (col3 as char(1)) as col_3 from test_table )

  I was wondering, what is the difference between oracle and sql server for the CHAR data type?
  
  The gurus of the idea?
  
  Thank you

  What is the error you get?

  What is the characters in database and NLS_LENGTH_SEMANTICS game on your Oracle system?

  SELECT *
    FROM v$nls_parameters
   WHERE name LIKE '%CHARACTERSET';
  
  SQL> SHOW PARAMETER nls_length_semantics;
  

  What is the character set of data in SQL Server?

  If your local database is a variable length character set (like UTF8) and NLS_LENGTH_SEMANTICS is set to (default) BYTES, a char (1) allocate 1 byte of storage which may not be sufficient for a single character. The receiving application may need to allocate a buffer with 3 times more many bytes as there are characters in order to ensure that it will be able to process the result. I don't know why add an implicit CAST that would change, but since we are several levels removed from the code to figure out how large a buffer to allocate, it is not very surprising.

  Justin