Registry errors. System hangs. How to fix registry errors?

Similar Questions

• Win XP SP3, no taskbar (tray) does AutoScan, no system restore, how to fix?

  Everything was in good working order when I shut down my pc for the night.  The next morning, I tried to play a mp3 music file, but no sound. Then, I noticed that (the speaker icon) volume control icon was missing from the taskbar. I have rebooted, thinking that would restore the icon, but the result was that the taskbar all disappeared, leaving me with no start button, no way to access programs or tools.

  Help and Support is not available, that is why it is the restoration of the system.  Via the Task Manager (file > new task > run) I can run programs and applications, but even if they seem to run, they do not work.

  Has spent two full days, trying to solve this problem and I now want to reinstall Windows, but another question is: I have only the original CD of XP Home.  Installation of XP says my installation is newer than the one on the CD (my system installed a Service Pack 3 and all Windows updates), so it can not be repaired and resettlement (since the old XP CD) will cause all my existing files and programs are permanently lost. Is this true? We used to be able to reinstall over an existing installation of Windows, and it would be, indeed, to 'renew' the Windows installation, but leave our files, images, programs, etc. intact. As a graphic designer, I have a large number of files, pictures, programs and applications that cannot be replaced, and I can't risk losing them.

  I have a sufficient margin on a D: / drive for everything on C: /, but wants that the wizard settings, and files on the XP CD to copy the content of two disks, so after a few hours of the collection of files, the wizard reports not enough room on D: / the transfer. I tried to burn to CD/DVD, but the wizard does not recognize my optical drives, only a floppy drive, and it would take hundreds of 1.44 MB floppies. I saw no floppy drive in stores for years and that a lot is not an option to purchase.

  I have a laptop available (which I use to access this web site), but it's a Dell Latitude older with far enough disk space to contain a small amount of data that I need to move away from the broken Office.

  The office with the problem began his life as a TigerDirect Systemax, with a 2.50 Ghz Intel processor, 1 GB of RAM, two HARD drives, each capacity of 60 GB, about 1/3 used on C: /, I need to save if possible, and about 1/4 used on D: / I could copy my files to D: / If the wizard would not copy the contents of D : / and C: /.

  I can't find any way to select which copy other than the ability to choose or not choose certain types of files. No way to tell the Assistant is not to copy the D: / drive.

  I would be very happy if:

  1. There is a way I can restore my taskbar and start button, (thus allowing me to access the tools to solve other problems that caused the problem);

  Or

  2. If I can simply reinstall XP on my existing installation without losing existing data (my programs, files, etc.)

  Yes, I realize that it is time for a new operating system and probably a new machine, but I cannot and I do with what I have. Any help and suggestions would be welcome.

  What's an error 5 - a permissions problem (you do not have permission).

  Did you use a registry cleaner and if what you (and why you thought it would help)?

  I love the good registry cleaners and have never had a problem with them, but there are of course a lot of horror stories and Council do not to use.  But I think as long as you have a plan for what to do and how to recover if your system fails or doesn't start at all after having used to have them home.

  I have probably used/tired all and never had a problem.  Can not say something very good has happened except that I could see the report of all the unwanted that he removed, for the most part, uninstall of products that do not do a good job of cleaning after themselves (even Microsoft products) and felt better then think things were more to the less net because I could see all unwanted leftovers that was deleted.

  Reinstalling XP is never an option for me.  my XP has been installed and works very well after almost 10 years.  There are too many people who need to be able to fix their system and they have no installation CD for so never had a she, lost the dog has eaten, etc, or their system does not have a CD/DVD drive even if they could come with an installation CD.

  Learn how to fix things in the most difficult conditions that matches that you want to find in the real world on the planet called Earth and not a fantastic planet or a world of dream.

• I can't perform a system restore, how to fix system errors?

  I clicked on system restore, and I was told that the restoration will not be complete.

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all of the above work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Laptop screen out of phase, only in normal when starting the operating system loaded, how to fix?

  My laptop screen guard flicking down, as if she were in phase opposition when the normal mode is responsible, when I use the modes safe, that the screen is fine and authorized to use, what can I do to fix this?

  Thank you
  Jack

  Try updating your graphics card:

  Go to the support site for your computer manufacturer and download the latest driver for your graphics card specific to your operating system (Vista 32 or 64 bit). Looking for instructions on the site of support on how to uninstall and install the driver.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Uncheck load system services, how to fix this?

  I unchecked system services accidentally load and restarted the computer.

  I struggled to update one of the windows update. I followed a suggestion online but

  He said to uncheck and recheck the system services load that I read wrong and kept unchecked.

  How can I fix it?

  Start the computer in safe mode and check that if you can be able to start, here is the link:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Press Windows key + R

  Type: msconfig

  Press enter on your keyboard

  On the general tab, select: Start Normal

  Click on apply and OK

• I get error restart system tray message offenly VC how to fix thisSony 15218SNB Vaio SVF

  I use Windows 8.1 and is my model of laptop SONY VAIO SVF 15218 SNB

  Yesterday IE, on 31.03.2014, I've updated my Sony Vaio Care Upgrade version

  14286 who has been published on 27.03.2014.

  Since my VAIO CARE 14286 version upgradation (27.03.2014 release date) the following error message flashes my offenly deskto

  VIDEOCONFERENCING TRAY RESTART SYSTEM

  How to fix this and one thing which in my taskbar there is no icon of Vaio Care

  Please fix this error by the patch or mail

  @gmail.com

  Thanks in advance

  JAYARAM

  Makwela

  I have the same error message on my SVe1512B1EW because I have improved the care of Vai system, how can I stop him I'm in the United Kingdom then your information link earlier was not good for me.

• How to fix an SD card with a (not mountable in file systems of error)

  How to fix an SD card with a (no file mountable systems error)?

  Use disk utility to reformat the SD card - all data will be entered (lost).

• Window: The system has recovered from a serious error - how to fix this?

  The system has recovered from a serious error - continues to appear on my screen when I start.

  Error reports

  C:\DOCUME~1\Owner\Locals~1\Temp\WER4b86.dir00\Mini07291-01.dmp

  C:\DOCUME~1\Owner\Locals~1\Temp\WER4b86.dir00\sysdata. XML

  BCCode: 100000d 1 BCP1: 443230B 3 BCP2: 00000002 BCP3: 00000000 BCP4: F8568256 OSVer: _1_2600 SP: 3_0 product: 768_1

  What is happening and how to fix this?

  Take a look at your event viewer for more information. To access it, go to start, run, type msconfig and press ENTER.

  A new dialog box will appear. Click the Tools tab and find the event viewer.

• How to fix windows photo viewer showing the class not regitered error in the local system.

  Dear all,

  Please provide me the solution.

  How to fix windows photo viewer showing the class not regitered error in the local system.

  Thank you best regards &,.

  Amol.

  Hello Amol,

  Were there any changes made on the computer before the show?

  The problem may occur if there is a problem with Java on the computer. I suggest you to check the link and try to update Java:

  http://www.Java.com/en/download/help/download_options.XML

  http://www.Java.com/en/download/index.jsp

  Let us know the results.

• error code Vista Defender 0x800160ba poping maintains and is off, how to fix

  Windows defender is disabled, the sp2 of vista running, keeps poping out of 0x800160ba error code and will not let me activate, how to fix?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How to fix error rundll on high tower dell with vista

  How to fix RunDll error on startup of dell with Windows vista laptop.

  Hello

  you do not give the exact error message

  Try this

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How to fix error "the path is not legal form."

  There is nothing else in the error box. How to fix this problem?

  I would go through the system error log to see what it says "error" at the time of this message.  To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  You have accidentally deleted files manually for a program that is installed without using the applet programs and features in Control Panel?  This is almost guaranteed causes messages like that because it leaves the registry entries that try to start the program when the program is no longer there.

  Good luck.

• Vista security patches installed as of 13/10/09. No errors but the system hangs on configuring updates step 3 of 3

  I allowed that the installation of Security dated 10/13 Vista patches last night on my laptop. Download and installation didn't report any errors. When I've allowed the restart of the system shutdown and returned upward to the screen that says: Configuring updates stage 3 of 3 0% not full not power off System. It has been so for more than 24 hours. Is it possible to interrupt this process or what are my options?  There are no errors has just the configuration screen. No disk activity. Just put it there.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• What does "error code 39, the device, / Device/CdRom0, has an average of bad block and how to fix it?

  Original title: that means 'the device/Device/CdRom0 has bad block averaging, and how to fix?

  I can not access my CD-Rom.  I get an error code 39.  Can you help me?

  Depending on the circumstances that generated the error, it can mean one of several different but related things.

  1. The drive itself is a failure [replace the drive].
  2. The media in the drive is not compatible with the firmware of the drive. [Go to the decision-makers in car's web site and see if there is a firmware update for the drive - or - if a burning operation, try different media].
  3. Lead to problems of software or registry issues [go to the Device Manager and remove the player.] Restart Windows to reinstall. Remove the upper/lower case filters in the registry. Instructions available on the Internet. Do a Bing or Google search].
  4. Anisotropic Pseudo-aleatoires variability in the matrix of the error of the universe [restart Windows and try again].

  Tom Ferguson

• IPhoto to my Macbook Pro doesn't let me play video clips (usually taken with iPhone). I get a message: "Error OSStatus-54."  Anyone know how to fix this? Thank you!

  IPhoto to my Macbook Pro (old version) won't let me play the video clips more (it was). They are mostly of clips to iPhone. When I try to open them I get a dark white page with an error message:

  "Error OSStatus-54".

  Someone has seen this and someone has suggestions on how to fix it?

  It's so frustrating because with most of these clips, that is the only place where I stored them - some clips I get from family members as well... (In iPhoto, I see a picture of the first frame of the clip, but the clip does not play). Even when the new version of iPhoto appeared on my computer, my old version slept and I continued to use the old because I liked it is better (more familiar).  The videos were still on the old version when I got the new version, but they stopped play several months ago. Help! Please? Thank you!

  What version of iPhoto? The operating system?