Registry warning

Similar Questions

• Start the system warning message: "one of the files containing the system's registry data had to be recovered after the installation of Trend Micro 2011 anti-virus software.

  Original title: registry warning message.

  This continues a question Nov 16 initially answered by SureshI and then merged by SyedV on November 26. I followed the steps all the recommended and the problem persists. Reminder, the warning does not appear in safe mode, but it does after the running File Checker, and it does after a clean boot. I don't know what you think it should tell me.

  In the event viewer I determined that 2 system errors are occurring at the time of the application in pop - up (i.e. the warning), one of them exactly at the same time. They had to do with services that have not started. I disabled these services, no effect on the appearance of the warning. Background on the application in pop information - up suggests that it may have to with a driver that is not available. I did a driver scan and see nothing that would cause the message.

  I noticed that two application errors also occur at startup, but these come about five minutes after the application pop up, so I guess they aren't relevant.

  Anything else I can do?

  Pevinco

  Problem is now solved. The point of the error of HP Cue device detection was the key. The deactivation of the service did not help, but uninstall ALL HP software that I could find (and HP's pushy!) and then reinstalling the popup eliminated printing software.

  Pevinco

• How to solve 'access denied' on the update of the registry key when installing XP SP3?

  Running XP 2002 version upgraded to SP2 on a Gateway Pentium. Downloaded and used Microsoft SP3 disk, but the "access denied" message whenever I try. I have disabled 3rd party software, but still have the question.

  Hi Robert1947_995,

  You can download the Microsoft fixit from following link and check if the problem persists.

  http://go.Microsoft.com/?linkid=9730795

   

  Registry warning

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Let us know if that helps.

• is it possible and safe to open the registry of Windows 98 into XP RegEdit on a system dual boot?

  I have reinstall some stuff on the side of a system XP dual boot, I found the instructions to transfer the configuration to a new machine, and these instructions include export the registry keys to a .reg file. Is there a way I can save myself a few reboots if I find more like that and you open the registry of Windows 98 on drive C with Regedit in XP?

  If necessary, I can easily access the regedit win98 since Windows 98 program is on drive C and XP on the D. I don't want to corrupt the registry win98se, if I try to open it under XP.

  The procedure would be

  Open the registry of Windows 98SE.
  Export the key to a .reg file
  Close the damper of win98.
  copy the key in the .reg file in the registry of xp in the normal way.

  SlickRCBD salvation,

  Unfortunately you cannot open regedit (registry editor) for the operating system Windows 98 to computer of Windows XP that you will not be able to access the same. You must start the operating system to access its registry settings.

  Note: Microsoft does not have the responsibility to transfer the registry settings of the operating system to another. Op can do on its own risk.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

  Hope this information helps.

• Unable to make changes to the registry.

  Original title: The status bar notification

  I used to be able to go to regedit, theoretically/local settings, current version, and then in the notification bar and remove previous workflow icon and another thing after the cache then go to Explorer and delete, but now I can not do this way somehow.

  I already know how this hide them

  

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you cannot make changes in the registry, that you were able to do before. The question might be if there is a file system corruption or corruption of the registry settings. Then, I suggest you to try the steps below and see if it helps.

  Method 1

  There could be a chance that there is a file system corruption. So, I suggest you run SFC scan and see if it makes a difference.

  The file system check is a utility built into the operating system that will check for the corruption of system files. The sfc/scannow command. (System File Check) analyzes the integrity of all protected operating system files and replaces incorrect versions, damaged, altered, or damaged with correct versions where possible.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  • Go to Start, click all programs and open the Accessories.
  • Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  • In the command prompt, type the following command and press ENTER:

  sfc/scannow

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Method 2

  If the problem persists, then there might be a corruption of the registry settings so, I suggest you to check the steps in the below mentioned thread and see if it helps you to solve the problem.

  Access denied - owner and/or setting permissions on the registry key

  Registry warning : This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Error while trying to run a visual Basic (.vbp) project in Visual Basic 6.0 with Windows 7 (64-bit) Enterprise saying "error access to registry system.

  Hi guys,.

  In my last computer the VB6 project worked with Windows XP but now I changed to Windows 7 and I can't run some application in visual Basic 6.0 that I still...    (I'm meaning to open the .vbp file to run in the environment of VB6 and not talking is not running the .exe).

  When I open the .vbp (from Visual Studio Enterprise 6.0), then comes an error saying "The system registry access error" only on this Windows 7 (64 bit)...

  I can not changes made in VB6 or compile programs is it my Windows 7?   There must be a solution that I think... something to execute or modify.

  By the Way this is my first post on Microsoft Answers and hope to get lucky on that first and solve my problem; (O)

  Thanks for any information

  M.

  Hello

  1 are logged as administrator?

  2. is it works much earlier?

  Method 1: Try to "Run as Administrator". VB6 needs to access the registry, and user account control sometimes gets in the way.

  Method 2:

  You can check the following link and check if it solves the problem:

  PRB: Error access to the system registry ' Message When displaying VB/VBA references.

  http://support.Microsoft.com/kb/269383

  Method 3:

  As you may have run the program under Windows XP, you can try to run it in compatibility mode and check if this solves the problem. See the following link for more information.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows.

  For additional help with this specific technology, please ask your question to the MSDN Visual Basic Forums.

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  I hope this helps.

• I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

  Original title: Matshita DVD-R UJ 890

  Hi AJordanMiller,

  Try these methods.

  Method 1

  Run the fix - it from the link below.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2

  See the help article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.

• out-of-browser Silverlight Launcher

  I can't access cable, although I was able to access before.  While the Optimum window tries to launch, a window pops up that says silverlight out-of-browser launcher has stopped working and then the process stops and the Optimum app stops.  Anyone know what is happening?

  Moved from feedback

  Hi Joseph,.

  Welcome to the Microsoft Community Forums.

  It seems that Microsoft Silverlight is originally the application Optimum close suddenly.

  I ask you to answer this question, so that we can better help you:

  Windows operating system is installed on the computer?

  Refer to this article and follow the given steps:

  How to clean a facility damaged Silverlight and then reinstall Silverlight
  http://support.Microsoft.com/kb/2608523

  Registry WARNING: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Another reference:

  Out of Browser

  I ask you to contact Microsoft Silverlight forums to get help.

  Please get back to us with the State of the question.

• Netflix app error: W8158

  When you try to watch movies I recently downloaded the NETFLIX app on my touchscreen Vaio, graphics card Intel HD Graphics 4000, external: AMD Radeon HD M 7670.  When I try to watch a movie, I get the error code following 'W8158 '.   What is - this and how to fix it?

  Hi Marcos,

  I would appreciate it if you could answer the following questions to help you best:

  1. what version of Windows is installed on the computer?

  2 has there been recent changes made on the computer before the show?

  Operating system Windows am I running?

  I suggest you to refer to the links and check if it helps.

  W8158 error Netflix App Windows 8

  I get errors when you try to play content protected in Windows Store apps videos

  Registry warning: Back up the registry

  Please post back with the results and we will be happy to help you further.

• the screen is black at startup, I have to turn off many times before the lites screen upward

  screen is dark at the start until I have to turn off several times before the lites screen upward.

  [Moved from comments]

  Hi Ken,

  It would be more useful if you answer these questions.

  1 Windows operating system you are using?

  2. What is the brand and model of the computer?

  3. were there any hardware or software changes on the computer?

  If you use Windows 7, then follow the article provided to fix black screen at startup issue.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

  Thanks vikrant I used scannow and it fixed my problem of registry. I have windows 7. Click Start type command RT. Click on the cmd icon, click on run as administrator, black screen should appear. type sfc/scannow press ENTER.

• How can I get my DVD player 'lost' back again?

  My computer has a dvd recorder/player I've used several times mainly to install new software. Recently he no longer recognizes that the drive exists. I can not load the new software and I can not download anything to re - install the drive because it does not exist. How to get back my DVD drive again?

  Hey Schneider,

  1. don't you make changes on the computer before this problem?

  2. what version of Windows you are using on the computer?

  3. What is the number of brand and model of the computer?

  This problem may occur if one of the following conditions is true:

  • You upgrade the computer to Windows Vista or Windows 7
  • You install a service pack Windows
  • You install or uninstall a CD or DVD recording program
  • You uninstall Microsoft Digital Image

  Check the help below link and if it solves the problem.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful. Back to us for any problem related to the Windows operating system. We will be happy to help you.

• Loser sound/image during rewind Live TV in Media Center

  Using Windows 7 and Media Center, upgrade to Windows Vista.

  All other parts of the Media Center seem to work normally.

  I can watch Live TV very well, but if I hit the back of chapter button to go back a few seconds, it works for the first two clicks, but then the screen goes black (the preview window and timeline always functions at the bottom of the screen).

  If I have wind and then forward to the current zone 'live', picture returns but with no sound. Need to get Live TV to get her back.

  The machine is used only for Media Center, but also installed PowerDVD.

  The back of the net...

  Hi Dylan Tusler,.
  Registry warning

  
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
  
  Find and delete these two registry keys and restart to fix the problem:
   
  [EntVersion entVersion\Media Center\Extensibility\Entry Points\ {7e7a8710-9e4a-40a3-824a-7b0baf38abcf}]
   
  [EntVersion entVersion\Media Center\Extensibility\Applications\ {a0cd8951-e5b6-4662-9c9c-d56c5b38ca59}]
  
  
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• the volume control icon on the taskbar, the lower right corner of the screen,

  I know how to get to the Add/Remove programs on my computer, but how I do whatever it takes to get volume icon control put the taskbar at the bottom of the screen in the bottom right? I have the volume, but it is impossible to solve the cause of volume, the icon is not on the taskbar

  Hello

  Thanks for posting the request in the Microsoft community! The problem description, I understand that you can't adjust the icon on the taskbar volume control. Provide the following information:

  1. don't you make changes on the computer before the show?
  2. you receive an error message?
  3. what version of the operating system is installed on the computer?
  4. What is the brand and model of the computer?

  Try the advice given and check.

  Method 1:
  You can try to update the latest audio drivers on the manufacturer's Web site and check.
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:
  You can try the steps in knowledge base article and check.

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the in the Windows registry:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
  http://support.Microsoft.com/kb/945011/en-us
  I hope that helps!
  If the problem persists, or you need help on Windows please keep us laid.

• Silverlight error 4001 while you try to view a missed TVoutage

  Original title: Silverlight error 4001 poster, sorry, something went wrong. Film will not start playing (advertising goes well!)

  Just like steated above, since a update (don't know if it was the 5.0 er the 5.1 update) I received the above message when you try to view a missed TVoutage (it worked well until September)

  Hello

  (1) you are able to correctly read the other videos?
  (2) remember to make changes to the computer before the show?
  (3) you are trying to play the video online?

  (4) what version of the Windows operating system is installed on the computer?

  You can try the following methods and check if it helps.

  a. close all open web browsers.
  b. uninstall Microsoft Sliverlight by going to control panel > uninstall a program > Microsoft Silverlight > Uninstall.
  c. go to C:\Users\username\AppData\LocalLow\Microsoft and delete the Silverlight folder.
  Note: If you do not see the AppData folder, you may need to show hidden files.
  d. If it does not, follow the steps mentioned in the article , http://support.microsoft.com/kb/2608523

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/
  e. reinstall Silverlight.

  Open the links below and check if you are able to watch videos of test
  http://www.Microsoft.com/Silverlight/IIS-smooth-streaming/demo/#/multi-cam
  http://www.Microsoft.com/Silverlight/IIS-smooth-streaming/demo/#/live

  For additional assistance, please contact forums Silverlight.
  Here is the link: http://forums.silverlight.net/

• Problems of race.

  The Courvite is always working in the background. The small circle next to the arrow is continuously power on and off. What is the problem and how can I solve this problem?

  Hello

  1. you made any hardware or software changes the computer recently?

  2. what operating system is installed on the computer?

  3. you have a wired or wireless mouse?

  Try these steps and let me know the status.

  Method 1.

  Start the computer in safe mode and checkfor the question.

  Advanced boot (including safe mode) options: http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Method 2.

  Try to put your computer in a clean boot state, and check to see if the same problem happens. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3.

  If you suspect a virus infection on your computer, and then try the steps in this link.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Hope this information is useful.