Regular restart of Infrastructure first, 3.1.3
We have problems of memory with our first 3.1.3 infrastructure installation, which results in the application unresponsive. As a short term mitigation measure, I would like a weekly reboot of the application of the annex. Is there a way taken in charge to do this? I can't find any reference in the product documentation.
Thank you very much.
Hi Scott,.
A graceful restart PI services should do the work to recover the memory.
The CLI commands "ncs stop" and "start ncs" do exactly that.
It is impossible (in charge) integrated programming that, however, you should be able to configure a Linux Cron job to run these commands to help during the week.
I recommend giving at least 15 minutes between the call to stop and the call for starting, so you can allow enough time for the system to stop all services properly.
I hope this helps.
Luis
Tags: Cisco Network
Similar Questions
-
I can't open firefox unless I restart my computer first.
Firefox does not open unless I first have to restart my computer. It was such a joy so far. How can I fix?
This has happened
Each time Firefox opened
It should say "whenever I try to open Firefox." Two weeks ago.
User Agent
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.5 CLR 2.0.50727 .NET CLR 3.0.04506.30 .NET; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
See this:
https://support.Mozilla.com/en-us/KB/Firefox+hangs#Hang_at_exit -
Must regularly restart the DHCP Client - HP Pavilion 500-205 DT - Windows 7
HP Pavilion 500-205 DT - Windows 7 Home Premium 64 - bit SP1
Realtek PCIe GBE Family Controller - pilot 7.67.1226.2012
Bought 3 identical machines for our daycare. Set up the same. All work fine except ONE of them becomes inaccessible periodically (every day more or less) on other computers on our small LAN-to-peer Windows. You can see, but cannot access any shared folder. To access OTHER computers on the local network of it there is NO problem. All 3 machines have the same profile sharing, workgroup, permissions, AV, firewall, all settings. I realized by restarting the computer solved the problem immediately but temporarily. I reduced to restart the DHCP Client service. Do all works well immediately, but temporarily.
I tried the things:
Call support HP - not useful at all. It is under warranty.
IPv6 disabled
Disabled wireless
Disabled network card stopcock energy saving
Definition of recovery CLIENT DHCP on:
First failure = restarting the Service
Second failure = restarting the Service
Subsequent failures = restarting the Service
Reset Fail Count after = 120
Restart the Service after = 0
But again, this is not the case for other machines with the default settings. Nothing works except the Client DHCP service is restarted. Loss of access occurs with or without someone connected or using it. It has happened since its first establishment.
I don't know if the HP warranty covers the OS loaded at the factory. I don't want to restore the thing and start over. I'm not a Pro, just the guy in the office who did these things, but it seems that the network card may be faulty. I don't know if I can convince a person of first level support phone to have me bring the machine in an approved place.
Any help greatly appreciated,
Larry
HP sends a FedEx box to put the thing in picked it up. I'll mark this resolved thing. Thank you all for your comments!
-
iMac restarts after the first start since 10.11.6
Hello
Since updating to OS X 10.11.6 my mid 2010 27 "iMac (iMac11, 3) restarts after a few minutes of availability.
It happens right after a few seconds.
The screen goes black, and then it displays this message. After the reboot, everything works fine.
Please post a report of EtreCheck of your system if you can get it to boot. Then we can consider for obvious questions that may be causing your problem.
A cause can be if you have any antivirus, cleanup or third-party maintenance utilities installed. Do you have?
-
MacBook Air suddenly restarted for the first time
So, today I just internet browsing (Firefox) and using Spotify and my computer to reboot due to a problem. I'm a Mac user forever, and the computer never restarted itself. I sent the diagnostic and data use to Apple, but I don't remember what it was. Now I'm checking Console and I see a panic report related to the kernel. What is going on? It is a software problem? I have a Time Machine backup to the case where.
My computer is a 2015 Macbook Air running El Capitan 10.11.13
Hi aliendays,
I understand that you had a kernel panic on your Mac and are eager to find out what caused it. Without a little more information since the report of panic or knowing what you found in the Console application, I can't really tell you. However, I can give you some information here about the kernel panics and some troubleshooting steps to overcome them. You're already the most important step in keeping your Mac backed up with Time Machine.
Take care
-
Pavilion dv3500 - FZ941PA #ABG: needs TO RESTART IN EVERY FIRST OPENING MY LAPTOP
Hello! Nice day!
Why should I restart my laptop at every opening, if I don't restart and it is lagging, and I try to reformat it (original OS) Vista for Windows 7 32 bit. In everyday life, I opened my laptop that I need to reboot before you can begin! Please kindly help me with my problem here, I'm too tired to restart every day my laptop. Thank you! Hoping to get immediately answers!
Hi again. After doing all this and replace the operating system and the problem still exists. You will need to contact the HP support by phone for repair options.
Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
Thanks again for posting and have a great day.
-
This is the update installed.
Update type: Important
A security issue has been identified that could allow an authenticated local attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
http://go.Microsoft.com/fwlink/?LinkId=179062
Help and Support:
http://support.Microsoft.com
It's crash results.
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.0.6002.2.2.0.256.6
Locale ID: 1033
More information about the problem:
BCCode: d1
BCP1: 00000001
BCP2: 00000002
BCP3: 00000000
BCP4: 8056662A
OS version: 6_0_6002
Service Pack: 2_0
Product: 256_1
Files helping to describe the problem:
C:\Windows\Minidump\Mini021710-01.dmp
C:\Users\Robert B Benson\AppData\Local\Temp\WER-778569-0.sysdata.xml
C:\Users\Robert B Benson\AppData\Local\Temp\WER147.tmp.version.txt
Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
Some time after the closing of applications and stop, at startup, the system "says" there was an "unexpected", even if stop at the previous stop, 'things' seem close, hault and close.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not solve the problem, repost in the appropriate Forum:
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Mobile application Infrastructure first, Cisco
Hi all
I need to download the mobile application for the PI and I donot find?
I need your help.
Hi Mohamed,
It is available on the Apple App Store. I just checked the store from my iPhone and see. Try searching on "First Cisco" and you should see the first Cisco application as well as the Cisco Plug-And-Play application.
See you soon,.
Chris
-
iPad App do not restart on the first slide
Has anyone else encountered this problem with an app for iPad:
I start the app and scroll to different slides.
I then shut down the application complete by using the procedure on an iPad.
When that I raise the the app, it loads in the last slide, I was instead of the initial launch slide.
Suggestions would be greatly appreciated.
This is how works the Viewer. He always remembers the last position that you were in.
Neil
-
First importer of Infrastructure models
Hi all
We have an existing installation of WCS (7.0.240.0).
I built a Server Infrastructure first release 1.3.0.20 running.
Initially, I had to look at our existing WCS set up migration, but the process in two steps (WCS->-> first NCS) watched topics to errors. Goal to jump and concentrate and set up of the blank page.
The only exception was the floorplan for the Wifi card, I was able to export these lines of WCS to premium without any hicups.
Then I added our main WLC and assigned the access points to the correct cards.
Sweet!
Now, I would like to get the models for our WLCs I have a couple more to deploy. The problem is that I don't want to manually configure templates first. WCS had the ability to import an existing WLC models, a WLC goldern config. I can't find any doco showing this ability. Everyone falls on something similar or another way I could achieve?
See you soon
Chris
Since the classic theme:
Go in configure > Controllers, select the controller, select templates discover in controllers
-
A lot of apps, first part and third party, not work
It wasn't a problem with watch OS 2.0 or 2.0.1 but since 2.1, many third parties, including Twitter and Shazam apps, have started to misbehave to the point that they are no longer usable. The problems encountered in these applications have not been resolved in more late watch OS updates or the other, as the developers of the aforementioned applications seem to have forgotten their Apple Watch extensions.
Much worse, however, is how my Apple Watch now fails to acknowledge the reminders and weather information from my 5 c from watch OS 2.2.1 iPhone. Despite having all the settings on my iPhone related to location-based services and app background enabled, refresh with 'current location' for the default location for the application of the watch and connect to a network WiFi b/g/n instead of WiFi a/c on my phone, my Apple Watch networks still has no time to my current position.
I liked my Apple Watch since I got it in October 2015, but since December, 3rd party apps began to fail constantly and since last month, own Apple applications have begun to fail. I don't want to disable pairing and pair my Apple Watch again. Last time I did it, the issues I had have been resolved, and I also lost my information to pay Apple, and my list of easy access history iMessage on my Apple Watch.
Hello
If you are not already made for a better return on your devices, keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.
If you do not want to disable the pairing and re - pair your watch again, he can still help restart your iPhone and your watch. Close the two devices together, and then restart your iPhone first.
-
Satellite P100 - problem during a restart after a software installation
Hello
I met a problem when I restart after the installation of software. Stay black screen and windows XP does not restart. The first solution is to wait a few minutes and then I can restart normally.
Could you please give me a reason and a solution to restart paques1861 after installation?
Thank you very much.
Hello
I'm afraid I n t m understand your problem
What the installation of the software do you mean?Did you use a Toshiba restore CD?
Please explain your problem a bit more -
Desires of Windows Update restarts all the time to complete updates
Update Windows (W7) asks to reboot all the time. I am up to date with all updates. There are usually deferred until 4 am, but sometimes not, and is called a reboot scheduled for 10 minutes. How can this be stopped? I tried to go back to a restore point, and then update again.
The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.
http://www.SevenForums.com/tutorials/2797-Windows-Update-settings-change.html
Before you try to install manually the updating of double control and make sure that the windows update service does not work after restarting
If so, stop the service and at least switch to manual.
If it is to stop the service and apply
These links will prompt you to download as soon as you click on them just for you give a heads up :)
Then manually install page article detailed KB3172605 with all versions.
https://support.Microsoft.com/en-us/KB/3172605
KB3172605
Win - 7 32-bit
Win - 7 64-bit
After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.
If you need Visual AIDS to refer to this
-
BLUE SCREEN OF DEATH, random restarts, pink shadow on all windows
Windows 7-64 bit
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 1033More information about the problem:
BCCode: 116
BCP1: FFFFFA8009AA44E0
BCP2: FFFFF88011E1293C
BCP3: 0000000000000000
BCP4: 0000000000000002
OS version: 6_1_7600
Service Pack: 0_0
Product: 768_1Very well with the color normal and all Windows start. Then all my startup program loading, turn it to this http://postimg.org/image/ylmfzypz5/. Then, whenever I click on something, the discoloration worsen until everything is pink, then it restarts randomly. I try to start in safe mode, which was fine and remove and then reinstall the driver of my gpu. The same problem. I don't know if this mess with her or not, but since yesterday, I had installed 8.1 and randomly it froze, restart and then got stuck in a restart loop when the screen goes black and restart after the first screen with option. I did a clean install of windows and it's still does not resolve so I tried to install windows 7 instead. Now this problem pop up.
No new material ore removed material, no new drivers installed, problem just pop up and I've never seen before.
Please help, thanks
Here's my dmp files
https://www.mediafire.com/?1bjwjiyy46ijceu
https://www.mediafire.com/?m0ozxx4fddr97eh
https://www.mediafire.com/?smdgxid3tsjmmfa
I strongly recommend that you update your system with the latest service pack available before proceeding with the following steps.
Steps to take before installing Windows 7 SP1 and Windows Server 2008 R2 SP1 starting from Microsoft Download Center
http://support.Microsoft.com/kb/2505743/en-usLearn how to install Windows 7 Service Pack 1 (SP1).
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-7-Service-Pack-1Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932).
http://www.Microsoft.com/en-US/Download/details.aspx?ID=5842Troubleshoot installation of Service Pack 1 (SP1) for Windows 7 or Windows Server 2008 R2.
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-installing-Service-Pack===============
Now, the details of the accident.
The debugging session: 18:56:35.235 Sun 7 September 2014 (UTC - 04:00)
116, error checking {fffffa8009aa44e0, fffff88011e1293c, 0, 2}
Cannot load the image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for nvlddmkm.sys
ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys
Probably caused by: nvlddmkm.sys (nvlddmkm + c 15393)SYMBOL_NAME: nvlddmkm + c 15393
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nvlddmkm
Nom_image: nvlddmkm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 53b4446a
FAILURE_BUCKET_ID: X64_0x116_IMAGE_nvlddmkm.sys
BUCKET_ID: X64_0x116_IMAGE_nvlddmkm.sys
STOP 0 x 116: VIDEO_TDR_ERROR troubleshooting (also for 0 x 117 of STOP errors
http://www.SevenForums.com/crash-lockup-debug-how/63320-stop-0x116-video_tdr_error-troubleshooting.htmlUninstall and reinstall clean NVIDIA Display driver.
==================
Make sure that the display and all the other drivers, including the BIOS are updated the most recent versions available. Start with those listed below.
Important *.
This could be the cause of these problems.
Bugcheck 1000009F, {4, 258, fffffa8009743680, fffff80003f9a510}Failed to load image \SystemRoot\system32\DRIVERS\asmtxhci.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for asmtxhci.sys
ERROR: Module load completed but symbols can be loaded for asmtxhci.sys
Probably caused by: pci.sysImage path: \SystemRoot\system32\DRIVERS\asmtxhci.sys
Image name: asmtxhci.sys
Timestamp: Wed Dec 08 05:14:06 2010 (4CFF5A6E)
CheckSum: 00069A 15Driver Description: Asmedia USB 3.0 driver.
http://www.ASMedia.com.tw/Eng/e_products_list.php?item=83&cate_index=0Note: Looking for an update from the manufacturer of your motherboard (linked below) support page as your first choice.
Identification information of the machine [of Smbios 2.7, DMIVersion 39, size = 1265]
BiosMajorRelease = 4
BiosMinorRelease = 6
BiosVendor = American Megatrends Inc.
BiosVersion = 4.6.4
BiosReleaseDate = 12/03/2014
SystemManufacturer = BIOSTAR group
SystemProductName = TA970
Family = None
SystemVersion =
SystemSKU = None
BaseBoardManufacturer = BIOSTAR group
BaseBoardProduct = TA970
BaseBoardVersion =BIOSTAR Group TA970
http://www.Biostar-USA.com/app/en-us/MB/introduction.php?S_ID=623#DL -
UNMANAGE an access point light on the MAIN Infrastructure
Hi guys,.
is there a way to unmanage a lightweight AP (LAP) on the Cisco Infrastructure FIRST, but keep it on the WLC management?, we want some of the life cycle free licenses.
Currently, we have a problem of license because when we add a WLC FIRST automatically adds all of its associated towers (115 aprox.) and they consume almost all lifecycle licenses available (125), causing that we cannot add another 10 aircraft for their FIRST management.
Is it possible some of these tricks FIRST unmanage but to keep their management of their corresponding WLC (in order to free some licenses of life cycle)?
Thank you in advance!
Kind regards
Sorry, but only you can do.
Once you succeed a WLC, all its associated with APs are also managed and therefore consume licenses of life cycle.
Maybe you are looking for
-
I have Windows 7. My old version of windows has always shown a lock when a Web site has been encrypted and secure. I don't see that now. How will I know that it is safe to give personal information such as credit card numbers, on a web page?
-
Pavilion g6 2337sr: upgrading laptop
Want your laptop to another more powerful processor, tell me is it possible to do it in this computer model laptop 'hp Pavilion g6 2337 sr.And please tell me taking my laptop and what processor will fit an upgrade. Write through a translator - I'm so
-
I disconnected all devices I have a Skype (home and office computer laptop, smartphone) application and always contacts me signed see and send IMs and make calls. Please help me solve this problem.
-
Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate. Error message says Hello not activated. Tells me to go to th
-
niDaqmx incorrect written sample
Hi all something strange is happening with one of my tasks for analog output. I use a PXI-6723 card for a sequence of simple sorting of the output voltages. Each change of production is triggered on the PFI1 line. Before starting out, I write 6 sampl