Reinstall the graphics card

Similar Questions

• Main problems to upgrade the graphics card in my Mac Pro in 2006.

  I am trying to upgrade the graphics card OEM in my Mac Pro 2006 to a Radeon HD 4870 1 GB graphics card.  I have big problems.  The previous owner recommended that my BONES 10.7.5 uninstalling and reinstalling.  I don't know how to do this.  The Apple website was no help with this issue.  The previous owner gave me a lot of procedures I've ever done before, including removing and re-creation of my RAM and using a Kext troubleshooting application.  Any suggestions you can offer would be greatly appreciated.

  a 4870 with 1 GB of VRAM is not a real Mac card (who had only 512 MB of VRAM). Unlikely to show an image until the login screen, if ever. Unless the seller has a 100% guaranteed working procedure to get this working, I recommend you return for a refund - it is not likely to work in your Mac.

  A true 5770 Mac or 5870 is the best approach for a 2006 or 2007 Mac Pro, because they are known to work with everything except movies under copyright, and your Mac is stuck in the 32-bit kernel and pre - 10.7.5 MacOS.

• Satellite P30 - error code 43 on the graphics card in Device Manager

  Windows Vista Professional Edition loaded as my new OS for the studies and course work. Now my display driver no longer works correctly.

  Device Manager displays the following message on the graphics card ATI Mobility Radeon 9600/9700: 'Windows has stopped this device because it has reported problems. (Code 43) »

  Have search everywhere on the web for solutions but limited knowledge prevents me to get a positive result. There must be someone out there who can help...

  Hi BigPappaDom,

  In my opinion to get rid of this, you need to reinstall the display driver. I have checked the site of Toshiba Satellite P30 is no Vista driver available. This means that you must find yourself to get all the drivers. :(

  I searched a bit and you should try to install the Satellite P200D display driver. She also equipped graphics card ATI and this driver must be compatible with your other oldest:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Satellite > Satellite P Series > Satellite P200D > display driver

  Check this box!

• Can I replace the graphics card on Tecra M2?

  I have a Tecra M2 and the display shows verticle lines across the entire screen. These lines also appear when plugged upward on a normal screen.
  I checked Device Manager and it says that the nvidia card "cannot start." The problems had me uninstall and won't reinstall, no luck.
  Next option is to unplug and then plug back in, but is it possible? If it is separate would rather just replace the card. Thanks for any help.

  Chase

  From your description of the error, this really sounds like a malfunction of the GPU (graphics processing unit).
  Unfortunately, it is a serious offense and if a replacement of material you will not be able to fix this :(

  It is a case value because you can not only replace the graphics card. You need to replace the whole motherboard because the GPU is soldered on the Board and cannot be removed easily.

  There is nothing to my buddy.
  Seems that you need to contact a support technician.

  Good luck

• Satellite L500-1DT: can't play Grand Theft Auto because of the graphics card driver

  I use my laptop for a number of games.
  I just downloaded GTA4 but can't play.
  I get a understood to "re - install DirectX and/or insert the latest video card driver.
  I reinstalled DirectX, but I'm not sure of the video card.

  Any ideas what driver I need?

  Hi mate

  This unit supports the Mobile Intel GL40 graphics card.
  The latest graphics card driver can be downloaded from the Intel page.
  See the Intel Web site.

  The installation of the graphics card must be made in the Device Manager.
  Here, you use the Advanced installation procedure which allows to point to the driver files downloaded from the Intel page.

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• laptop Pavilion dm4-2191us: need to fix the graphics card

  Hi, everything is stretched horizontally since I reinstalled windows afte a crash.  The resolution is currently at the maximum possible.

  The driver in Device Manager is "graphic card vga standard.
  is for the graphics card hardware ID: PCI\VEN_8086 & DEV_0116 & SUBSYS_1650103C & REV_09

  Monitor displays as "generic pnp monitor '.

  hardware ID: Monitor\AUO303C

  Can someone, please?

  Thank you

  @dhanisk

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54161.exe

  REO

• Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this?

  Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this? Is it a graphic file or a file from microsoft?

  Hi Jason,

  1. What is the number of brand and model of your system and graphics card?

  2 did you a recent software or hardware changes to the system?

  This error can be caused by an application, including any old games you have installed on your system.

  Because you tried to reinstall the drivers for video card, you can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• cannot start the computer without disconnecting the graphics card

  I'm having a strange problem.

  Recently my computer has started doing something funny.  If I choose restart, or stop and start the computer too fast, it does not start.  He posts about 3 times then won't start.  If I unplug the graphic card and let the beep from the motherboard error on the code, and then close it, plug it back and it starts.  It's really weird and I don't know where to start troubleshooting.

  Here are my system specs:

  OS: Vista 64

  Processor: Intel Core 2 Quad Q6600 @ 2.40 GHz (4CPU), "2.4 GHz

  Motherboard: Biostar T-Power I45

  Graphics card: NVidia GE Force 9800 GX2

  Any help would be great because I just had to reinstall windows, and there restart every time I install a program, and with this error it takes me about 10 minutes to start again.

  Thank you!

  Hello

  You've got a video that can interfere? Settings/Setup (BIOS/CMOS) often as F2
  you start so watch the screen for the key. Disable the integrated video if activated.

  If it does not help it sounds like you need technical support in a real store of the computer (not leeks and)
  Displays a BestBuy or some other BigBox store) or system manufacturer support.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Huge problem with the graphics card. Help me pls!

  Unfortunately my pc is not guaranteed, so my last hope is here on the forum.

  I have Dell Inspiron 580

  

  Ok.So the problem was that I found myself not being able to open My Nvidia Control Panel to verify customization as one of my games was so bad. That's why I found that my disappeared from Nvidia and Intel HD Core i3 graphics took place.

  

  And yes my pc used to run with Nvidia I have proof: P

  

  I must say that for me (as a heavy gamer) was a great kick as Intel uses all my CPU and my games become so difficult to play.

  I have tried everything that I could to restore the return of Nvidia (except one: to reinstall windows) but not one chance :(

  Reinstalling the drivers did not help actually I don't even know the type of driver that I need because that Nvidia is not found.

  Any advice? It will go to normal if I reinstall windows?

  Thanks guys and sorry for my bad English :D

  Hi Georgina26,

  You use the graphics card onboard because your monitor is connected to the video port badly. Turn off the system, unplug the video cable and connect it to the video card into the PCIe slot.

  If you are not familiar with the snap of a monitor on the back of your computer, please let me know and I will give a link to some photos.

• Several Bluescreens when you use the graphics card

  I've been making blue screens because of the VIDEO_TDR_FAILURE for some time now, and recently reinstalled windows to see if it would fix it. Unfortunately, it didn't, and I get more accidents all in game. So far, I checked my HDD with Seatools, entered back fine, RAM with memtest which was very good. (but only a couple going so far) The only thing that I have not been able to verify correctly is the graphics card. Right now, game will work if I use my integrated graphics to run, but even then it sometimes freezes.

  What should I do to troubleshoot my graphics card? I use a laptop, so opening the case is out of the question. I cleaned the dust and used several different discs, including my laptop was originally and the newest one. The temperatures are not the issue that the accidents have occurred anywhere between 50 to 70 degrees C. Can I still help out, or should I take the laptop in the computer store and let them look?

  Hans

  The pilot checked dumpster was related to your driver Audio MBfilt64.sys 4 + years of Creative Technology Ltd.  I'd install the most recent driver available.

  You can disable the auditor auditor/reset from an elevated command prompt

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\070114-15906-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 8 Kernel Version 9200 MP (8 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9200.16384.amd64fre.win8_rtm.120725 - 1247
  Computer name:
  Core = 0xfffff801 'b161e000 PsLoadedModuleList = 0xfffff801' b18e8a60
  The debugging session: Wed Jul 2 02:35:24.384 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:19.201
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ...................
  Loading user symbols
  Loading unloaded module list
  ........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {0, 2, 0, fffff801b168fb76}

  WARNING: Unable to verify timestamp for MBfilt64.sys
  ERROR: Module load completed but symbols can be loaded for MBfilt64.sys
  Probably caused by: MBfilt64.sys (MBfilt64 + 1817)

  Follow-up: MachineOwner
  ---------

  7: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: 0000000000000000, referenced memory
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000000, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: fffff801b168fb76, address memory

  Debugging information:
  ------------------

  READ_ADDRESS: GetPointerFromAddress: unable to read from fffff801b1974168
  GetUlongFromAddress: cannot read fffff801b19741f8
  Paged 0000000000000000

  CURRENT_IRQL: 2

  FAULTING_IP:
  NT! KeSetEvent + 1 c 4
  fffff801'b168fb76 b 488 09 mov rcx, qword ptr [rcx]

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP

  BUGCHECK_STR: AV

  Nom_processus: System

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  TRAP_FRAME: fffff880031fd960-(.trap 0xfffff880031fd960)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 0000000000000000 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff801b168fb76 rsp = fffff880031fdaf0 rbp = 0000000000000000
  R8 = 0000000000000000 r10 = 000000000000f28e fffff88003041180 = r9
  R11 = fffff880031fdb00 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv in pe of na EI pl nz cy
  NT! KeSetEvent + 0x1c4:
  fffff801'b168fb76 b 488 09 mov rcx, qword ptr [rcx] ds:00000000'00000000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff801b1698369 to fffff801b1699040

  STACK_TEXT:
  fffff880 '031fd818 fffff801' b1698369: 00000000' 0000000 a 00000000'00000000 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
  fffff880 '031fd820 fffff801' b1696be0: 00000000 00000000' fffff880 '1bdc7178 00000000 00000000' fffff880' 031fd960: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '031fd960 fffff801' b168fb76: ffff93a6 ' f5176c5f fffff801 'b16bed9f fffff980' 0bb2cea0 fffffa80 ' 0d0148b0: nt! KiPageFault + 0 x 260
  "fffff880 '031fdaf0 fffff880' 08f52817: fffff880 00000000' fffffa80 ' 00000008 fffffa80 ' 0c1223d0 00000000'00000080: nt! KeSetEvent + 0x1c4
  fffff880 '031fdb60 00000000 fffff880': fffffa80'00000008 fffffa80 '0c1223d0 00000000 00000080' fffffa80' 0f891ab0: MBfilt64 + 0 x 1817
  fffff880'031fdb68 fffffa80'00000008: fffffa80'0c1223d0 00000000 00000080' fffffa80 '0f891ab0 fffff801' b1c67b64: 0xfffff880'00000000
  "fffff880 '031fdb70 fffffa80' 0c1223d0: 00000000 ' fffffa80 00000080"0f891ab0 fffff801' b1c67b64 fffffa80 ' 0f891ab0: 0xfffffa80'00000008
  fffff880 '031fdb78 00000000' 00000080: fffffa80 ' 0f891ab0 fffff801 'b1c67b64 fffffa80' 0f891ab0 fffffa80 ' 0f891ab0: 0xfffffa80'0c1223d0
  fffff880 '031fdb80 fffffa80' 0f891ab0: fffff801 ' b1c67b64 fffffa80 '0f891ab0 fffffa80' 0f891ab0 fffffa80 ' 0c1223d0: 0x80
  fffff880 '031fdb88 fffff801' b1c67b64: fffffa80 ' 0f891ab0 fffffa80 '0f891ab0 fffffa80' 0c1223d0 fffff801 ' b196e800: 0xfffffa80'0f891ab0
  fffff880 '031fdb90 fffff801' b1c67917: fffff801'b18b3a50 00000000 00000080' fffff801 'b18b3a50 fffff801' b196e880: nt! ViPendingCompleteAfterWait + 0xc4
  fffff880 '031fdbd0 fffff801' b1640521: 00030038'00010001 00000400'000001 c 8 00000000 00000000 ' 0000228 b'00000003: nt! ViPendingWorkerThread + 0x2c
  fffff880 '031fdc10 fffff801' b167edd6: fffff801 ' b1914180 fffffa80 '06b19b00 fffff801' b196e880 fffffa80 ' 06ad6940: nt! PspSystemThreadStartup + 0 x 59
  fffff880'031fdc60 00000000' 00000000: fffff880 '031fe000 fffff880' 031f8000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  MBfilt64 + 1817
  fffff880'08f52817?              ???

  SYMBOL_STACK_INDEX: 4

  SYMBOL_NAME: MBfilt64 + 1817

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: MBfilt64

  Nom_image: MBfilt64.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4a7267b0

  FAILURE_BUCKET_ID: AV_VRF_MBfilt64 + 1817

  BUCKET_ID: AV_VRF_MBfilt64 + 1817

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:av_vrf_mbfilt64 + 1817

  FAILURE_ID_HASH: {984c922a-7f81-464e-cf02-f67be39b2b6a}

  Follow-up: MachineOwner
  ---------

  7: kd > lmvm MBfilt64
  start end module name
  fffff880 '08f51000 fffff880' 08f5f000 MBfilt64 T (no symbol)
  Loaded symbol image file: MBfilt64.sys
  Image path: \SystemRoot\system32\drivers\MBfilt64.sys
  Image name: MBfilt64.sys
  Timestamp: Wed Jul 30 23:40:32 2009 (4A7267B0)
  CheckSum: 0000FF02
  ImageSize: 0000E000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• ... Photoshop CS4 now includes the acceleration of the graphics card...

  Everytime I open my Photoshop CS4 I get the following pop up:

  

  When I load an image file that I get this pop up and my Photoshop closes:

  

  I am running Vista and have had CS4 since it was released and never met with problems. I have a NVIDIA GeForce 7100 which is updated, and the GPU acceleration is enabled in my Photoshop.

  If anyone can suggest what might happen and how I could fix it, I would be very happy!

  I would like to start by resetting the photoshop cs4 preferences:

  Hold down the Shift + Ctrl + Alt keys right after the beginning of the launch of photoshop cs4.

  Keep possession of the keys down until you get a dialog box asking if you want to delete the adobe photoshop settings file.

  Because you do, press Yes .

  In this dialog box on the acceleration of the graphics card, you can check do not show

  
  

  
  

  If reset preferences does not resolve the problem, try to disable Activate the Open GL drawing and restart photoshop cs4

  If it works, then most likely something has went wrong with your graphics card driver.

  (you may need to reinstall the graphics driver)

  Check Web of Nvidia site to be sure you have the latest driver for graphics card to day

  Drivers - Download NVIDIA drivers

• MacBook Pro 2014 - failure of the graphics card for the 2nd time in 2 years - no guarantee

  Hi all

  end of 2014, I bought a new 13 inch Retina Display MacBook Pro mid 2014 model (A1502, EMC2875). A few months later, the graphics card has failed - no obvious reason. Apple replaced. Now, the graphics card has not yet. Still, the mac worked perfectly well (no overheating of the noise, nothing) and all of a sudden - no understandable reason or external actions, the graphics card has failed. Unfortunately, I do not have a guarantee of more. At least, I can access my documents by connecting two Macs, so I hope that the material is not affected.

  My model (1502) apparently only has a single integrated graphics processor.

  My questions:

  • After some research, I discovered that Apple used to have these problems with the 2011 edition. They have implemented a replacement program. Does anyone know sth on this subject?
  • What graphics card would you recommend? How much such a graphics card? Where could I buy a cheap?

  Of course, I don't want to reuse the same type - guess I don't have to explain how @* #&! I'm after two times the same problem within two years after the purchase of a brand new MacBook Pro...

  I would appreciate any recommendations and links!

  Best regards

  Rahel

  -As you say, your Mac model uses the graphics processor integrated in the CPU chip. So, there are ios no replacement possible. The CPU is soldered to the logic board

  -The problem with the 2011 MacBook Pro was with the discreet Nvidia, not the graphics unit integrated in the CPU graphics unit.

  -When you went to an Apple store just says the genius of APple?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop.

• Can I update the graphics card in my iMac end 2012?

  I am able to update the graphics card in my iMac end 2012? I know that this is not a gaming computer, but I want to be able to play low end games. Is this possible?

  # You don't have a 'card' in this model. Starting with 2012 models graphics hardware was inseparable and soldered to the logic board. Looks like this:

  

  {image from iFixit.com}

  Small bumps under the person holds the heat sink are all your gfx hardware.