Reinstall the image on HP Mini 210 HD with XP Pro

Similar Questions

• I forgot the password for my mini 210

  Hello
  I do not remember the password for my mini 210.le how can I overcome this?

  Thank you

  Hello

  You can use a request for reset password such as the free utility on the link below - this can be created on a usb flash drive.

  http://pogostick.NET/~PNH/ntpasswd/

  Kind regards

  DP - K

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• I need help to download the new LiveCycle Designer ES3 that comes with Acrobat Pro 11

  I need help to download the new LiveCycle Designer ES3 that comes with Acrobat Pro 11

  With Acrobat 11 us is no longer the LC Designer ES3 package with her. It is sold separately.

  Kind regards
  Rave

• I forgot the password on HP mini 210

  I forgot my password on my HP mini 210 computer, even tried the suspicion and just cannot participate. Would appreciate the help.

  Welcome to say. Try.

  44062017

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Reconnect the hard drive HP MINI 210-4120ea

  I tried to look but I can't find instructions on how to reinstall the hard drive for this particular model. Can someone give me a link or just explain it? Thanks in advance

  It will take all portable 2.5 inches wide and a SATA drive of 9 mm thick. I would like to buy mine on newegg.com.

  Choose a model to 7200 RPM. It energizes the netbook a little that can never hurt:

  For $60 you can not go wrong with this one:

  http://www.Newegg.com/product/product.aspx?item=N82E16822136279

  The hardest part with a netbook is restoring software. The best thing is to make a bootable usb flash drive with Windows on it for installation. After the back if you need some help with that.

• Need the PIN for HP Mini 210 headphone connection

  Hello

  Someone at - it connections of the pins used on the headphone jack on the Mini 210? I would like to plug in some external audio in this decision and need to know if the mic input is the tip or the ring of the Jack 3.5 mm.

  Thank you.

  Click here and discover the Page 87.

  Let me know if it helps.

• Mini 210 help with upgrade options

  I have a mini 210-1142CL

  Someone has updated the motherboard on this model and if so, is it really make a difference in performance.

  Upgrade options are also somewhat confusing.

  The mini works fine for me and before that pitch for a newer model, wanted to explore options of upgrade of it for at least a dual processor at the fastest speed it can handle.  Right now, it is running.  Have disk space enogh with 128 GB of free space, 1 GB of RAM.   Running a 1.66 GHZ N455 chip.

  Not sure if a 1.5 GHZ dual chip will really make a substantial difference, or if it's time for new technologies.

  Thank you

  Stan

  Atom processors were a dead-end. However, the N550 1.5 ghz dual was one of the best. A bit like the world above 'little person' but still a honor:

  http://cpuboss.com/CPUs/Intel-Atom-N550-vs-Intel-Atom-N455

  Just to put it into perspective, here is a graph of the N550 vs some real processors.

  http://www.cpubenchmark.NET/CPU.php?CPU=Intel+Atom+N550+%40+1.50GHz

  I saw the N550 motherboards for $45 on eBay. Performance is perhaps 30% better than the single core 1.66.

  Your best upgrade is to install the 2 GB of RAM.

  If you feel compelled by the whole thing of netbook, I'd get a new laptop. The technology comes from the netbook to be a reference in the calculation of the story. Good idea at the time. A good current smart phone probably has as much computing power.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• AIP - SSM recreate the image in secondary ASA 5500 (failover) with virtual contexts

  Hello guys,.

  The scenario is as follows:

  2 ASA 5500 with virtual contexts for failover.

  The ASA elementary school has the work of the AIP-SSM20.

  ASA school (which is in active / standby) has its SSM20 AIP to work now and everything is in production.

  Someone tried to configure this 2nd AIP - SSM, changed the password and lost, so I tried to re - the image (without authorized passage recovery), but the connection fails on the TFTP server, where is the image of the AIP - SSM.

  Now questions, documentation Cisco re-imaging view orders under ASA #.

  but as this scenario has several virtual contexts the ASA # shell contains no IP address as you know (which I suppose is the reason why the ASA cannot download the image from the TFTP server) and switch to another context (ASA / admin #) re-imaging commands do not work (hw-module module 1... etc...).

  What is the solution? Is there documentation for it (with security contexts)?

  Thank you very much for reading ;) comment on possible solutions.

  Yes,

  Some things to keep in mind.

  (1) run 'debug module start' on the SAA before running the command "hw-module module 1 recover boot. This will show you the ROMMON of the MSS output as it tries to make the new image and you can look for any errors.

  (2) before trying to download from the SSM, first use a machine separate download tftp from your laptop. This will ensure the TFTP on your laptop works and confirm what directory (if any) that you can use as the file location.

  (3) if the tftp download does not SSM, then the SSM is unable to properly connect to your laptop. You need a crossover cable to connect your laptop to the SSM. If you have a crossover cable, then you could try to connect the MSS and your laptop to a small hub, or configure a new vlan on your switch with only 2 ports and connect the MSS and your computer laptop this vlan 2 port.

  (4) also try the download first at the end of the gateway to 0.0.0.0 since your laptop and the SSM will be on the same subnet. If this does not work then you can try a non-existent 30.0.0.4 address as gateway.

  (5) understand that the IP address that you specify for the MSS using the command "configure the hw-module module 1 recover" is just temporary for download. Once an image is installed, then sitting at the module and run the "setup" command in order to configure the permanent address you want ure on external port of the SSM. This address in the "setup" command can the same as that used in the command 'get the 1 hw-module module configure' or a completely new (as in your case). Just make sure that you connect to the network just to what address you give.

• External hard drive where the stored images has been corruptd. The images recorded, but now cannot connect with LR

  I got LR cc 2015 put in place so that the images have been imported on my external hard drive and lightroom files were stored there. This hard drive has failed, but I was able to save all my files (original) and I transferred to a new external hard drive. Now, I can't get LR to recognize the new drive and location. LR albums have? next to them. I would appreciate any help you can give me that I have try to reconnect LR with the new source of my images. Sorry, I'm not very technologically.

  Tom

  There are 153 images in this catalog, all on 1 external. Which does not seem right, or you expect very different numbers, could you give me an idea of what numbers you expect?

  This seems to be an empty catalog with any folder. It seems to me that you have opened an empty catalog somehow. Could you please try file-> open the recent item and see if any of the other catalogues listed is the one you want? If this does not work, could you please try to restore a recent backup of your catalog file and see if the situation is resolved?

• Want to use my current logo and apply it to the images of clothing: is it possible with elements?

  I want a tool that will allow me to use my current logo and apply it to the images of clothing. Elements will be able to accomplish this task. I'm not a pro and you are looking for the best product from Adobe, these simple tasks.

  any suggestions will be very useful... Thank you

  You should be able to do this in Photoshop Elements.

  The drill is to isolate the logo in the background, and then copy/paste for the clothing.

  Suggest you download the free trial 30 days of PSE13 which is a fully functional program.

  Here are some prepared before:

  How can I add a logo to my photos?

• What is the image size always optimal for use in Premiere Pro?

  I'm pretty new to Premiere Pro so please excuse any extreme stupidity.

  I make a movie composed of various interview with. I intend to drop in stills (and possibly scanner and pan around on them). Still images come from various sources and will have been filmed on different formats.

  I asked images high resolution, but asked what size I want the images she mm. Can someone advise?

  The film will be shown on Vimeo and on a Web site, but it is also more extensive for projection high definition if necessary.  The movie is HD 1080 x 1920

  Any advice greatly appreciated.
  Thank you

  Make sure that the person who provides still images is measured in PIXELS. Not MM, inch, DPI - but PIXELS no no. No other video issues.

  Your 'canvas' in first 1920 x 1080 (HD 1080) pixels, it's the size minimum everything should always be to fill the frame without having to to scale upward (loss of quality). Of course, if the image is portrait style, then it will NOT fill the frame, but rather will be black on the sides, bottom replacement or as others have suggested. In this case, make sure the height is at least 1080 (width will be narrower than 1920).

  You said you want to crop, like Ken Burns, so then you would like images greater than 1920 x 1080, such as the 3456 x 2304 proposed. Allows you to zoom in to a certain extent using pixels available in the image without actually upscaling the image at all. The more you want to zoom in, pixels more than you need to achieve this without degrading the quality of "blow up" the image.

  Good luck

  Jeff Pulera

  Safe Harbor computers

• Help! Shooting auto (video) w / webcam. Reading reverse image/text. How to fix with first Pro CC?

  I filmed myself with webcam on my computer so everything is reversed. Example, the cup of coffee with the name is back, the business card that I show the camera, text, letters, words, all reverse, backward. I filmed it all the way and later learned about the setting of film to the appropriate way to avoid this problem. Is it possible that Adobe Premiere Pro CC can fix this? This difficulty? How? Thanks, JR

  Try the Outlook's FX 3D and flop of the image.

• HP mini 210: I forgot the password on HP mini 210

  Can hello you help me? (I'm french so sorry for my bad language)

  When I turn on BIOS, I get "Please insert Administator password"

  When I put the wrong password 3 times it gives me the 66700847 disabled system

  Thanks for giving me your help

  Hello

  Enter 79668289

  Kind regards

  DP - K

• change the image of 300 to 72 dpi with Photoshop elements 13?

  You want to buy a picture for a Kindle cover that is only available in the size required by the Kindle as a 300 dpi image. Can I change it at 72 dpi with my Photoshop elements 13?

  So if your original is bigger, why not go for 2500

  Open your Original and select:

  File > save for Web

  Select from the menu file type Jpeg maximum quality.

  The setting is usually about 60, but you can push the slider to 100 for no compression.

  Under the heading new size leave the width and height linked and type 2500 in the width box. The pitch changes automatically. Use the height box if it's the longest edge.

  And then click OK.

  Save under a different name.