Reinstallation of Vista error

Similar Questions

• After the reinstallation of Vista (32 bit) I'm done with Windows and most of the stuff on the disk 1 (c), but with stuff on the disk 2 (d).

  original title: after reinstallation of Vista (32 bit), I found myself with Windows and most of the stuff on the disk 1 (c), but with stuff on the disk 2 (d). It's hard to backup.

  I wish all the disk 0, which is 250 GB, leaving the 1 free 500 GB disc to have been the repository of backup and archiving of others.  But I don't want to have to reinstall everything.  I couldn't move bootmgr, BOOTSECT. BAK and 'boot' folder on the disk 1 (c) by somehow the system partition?  Then there would be no OS stuff on disk 0 (D :); back, but better than mixed.)  What happens if I disconnect physically the smallest disk, Startup Repair will make the disc with Windows boot and system partitions? Thank you.

  Hi OldScientist,

  Before performing these steps, it is recommended to make a backup of your important data.

  Step 1: Mark Disk 1 (C) as active partition, then launch Startup Repair

  Follow the steps mentioned in the link below to mark C as active partition

  Mark a partition as active

  http://Windows.Microsoft.com/en-us/Windows-Vista/mark-a-partition-as-active

  Follow the steps mentioned in the link below to launch the Startup Repair tool

  How to use Startup Repair?

  If the problem persists,

  Step 2: Follow the steps mentioned in the article below to rebuild the BCD (Boot Configuration data)

   

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".

  http://support.Microsoft.com/kb/927391

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win Vista error when the computer is open

  I've been surfing this site looking for an answer of the following error messages when I open the computer Application: open them all at the same time.

  1 could not start the dispatch table, win vista error

  2-cannot create TransportManagerServ: create

  3 - the third is a dialog box with the title: error SDMan WinMain. It says: an instance already exists! -OK

  Can someone give me a hand? Thank you

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Also, try the following:

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Andre Da Costa http://adacosta.spaces.live.com | http://www.ActiveWin.com | Microsoft MVP

• I recently had my computer repaired with a reinstallation of Vista. I've also changed since my old modem to a router. Now the quality of the video is of poor quality.

  I recently had my computer repaired with a reinstallation of Vista. I've also changed since my old modem to a router. Now the quality of the video is of poor quality. But after the call to another specialist, is no better. I'm a little stuck and don't know what to do.

  original title: choppy video streaming

  Hello

  1. what browser do you use to watch videos?

  2. are you having this problem on all sites?

  If you use Internet Explorer, I suggest that you try the troubleshooting provided in the link below steps to solve the problem.

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294

• LindaanderssonYQ - photos of Vista - error response Code

  LindaanderssonYQ - photos of Vista - error response Code: repair worked and now everything is fine. Thank you very much

  Hello

  Glad to know that the problem is solved. If encounter you problems with Windows in the future, please contact us.

  Thank you.

• Windows vista error

  is anyboy know how sovle windows vista error: your user profile was not loaded correctly! You have been logged on with a temporary profile"I got this trick on my laptop and it says prepare your office and then pops up this message and all my documents have been delected so please help thank you very much!

  I can not connect from the windows login page that my profile does not load, please can you suggest a fix? Please can you teel me step by step what I need to do about it, I am connected with the other profile of the user who is not an administrator for the time profile, my password does not work for updates, if I try to update something in this respect either.  Help, please!

  Hello

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.
  
  http://support.Microsoft.com/kb/947242

  also, you can try the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Word or excel file does not open on gives Vista error: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  Word or excel file does not open on gives Vista error: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  Whenever I click on a word or document it opens excel excel but it gives an error message: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  I can open the document that after selecting the file only in excel or word blank document by clicking on the windows logo & choose the file and click on open.

  I need immediate assistance. I tried windows service pack 2 updates, but nothing works. Can anyone help?

  Please repost your question in the Discussion of the Office group at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.office.misc&lang=en&cr=US where the Word and Excel experts will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Bootmgr missing errors illustrated the reinstallation of Vista

  Hi, (this is my first post)

  I noticed that my pc was running long-legged I ve tried everything and I had nothing to lose so I if I could start a clean condition, I had the Vista repair disks that I created using vista Toshiba disc creator, I used them and he said that he failed or something and the pc crashed everything. Now when booting via disk HARD I received this
  "bootmgr missing".

  So I tried to boot in the disks that I created with the software of Toshiba and I received the same error, I have no Vista installation DVD and I'm lost.
  What should do?

  Any help would be appreciated.

  Can you start installation of HARD drive?
  It is described under http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

• error code 0 x 8007002 on reinstallation of vista

  Hi, I need help badly I wiped my laptop with a ghost disk its pack of callesd system restore and it wiped everything.

  I tried to reinstall vista but only go as far as puttin in mt production a key then to get an error code 0 x 80070002.

  my laptop just keep restarting auto asked me to put this in the command promt thing(rstrui.exe/offline:c:\windows) say it dose not unequipped I think that his my something to with my hard drive start ive not damaged, it somehow its only since I wiped it please help me

  my laptop is fujitsu siemens amilo li 2727 model ms2228

  http://TS.Fujitsu.com/support/

  If you use the recovery Partition on your computer which is the process of recovering from the manufacturer.

  Contact them in accordance with my previous answer, or try to ask in their Forums:

  http://TS.Fujitsu.com/support/forum/index.html

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot complete the reinstallation of Vista on Compaq laptop using the Compaq recovery disks. Tried to restore disk oem and new close to identical road. Errors: 0xc00000e9 and 0xc0000189 respectively

  With no unusual occurrence that accompanies it, our laptop was able to start and would not initialize anything beyond a screen B & W style BACK and gave the first error (0xc0000e9) on this screen. After several unsuccessful reboots insert us the Compaq recovery disks and crossed the recovery (only full optional with such discs.) At the end of the transfer of recovery (from DVD on computer), the computer tried to restart and reported the same error message. We have seen anything past the transfer of files and B & W on the oem disk. I think the oem HD is bad. Web-surfing suggested the error was associated with a hardware failure and the DVD drive seems to work very well I bought a new HD almost identical to replace the oem version with. Both are Seagate Momentus 160 GB at 5400 RPM drives.

  I re-inserted the recovery with the new installed hard drive disks and it loaded and seemed basically completely install Windows (computer is restored running several times and showed the Windows desktop with sequential programs etc. facilities.)

  To restart the final success, I received an error message in the sense of "windows could not install: Please restart the installation process" and the 0xc000189 error code. I tried again and the result was identical, including the error message. In the process the emblazoned shortcut labeled sunflower administrator with "locked" below briefly appears before the above error appears above him. Navigation on the Web seems to suggest I've hit some kind of security problem that appears when an oem auto-installer is used. He was never a password of any kind on the laptop of our family, if there is one, it should be of Compaq.

  It's an authentic (not stolen etc) oem new install of Windows (the laptop is only 18 months old) and I CD code on the computer but not the case in the installation me I asked for it. I don't know what you looking for installation.

  I'm very confused and any help would be appreciated. Compaq is saying it's a matter of Windows of course.

  Thank you

  http://www.Compaq.com/CPQ-country/cpq_support.html

  Problem with the recovery process, contact the manufacturer of the computer.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• How can I fix windows vista error, pshed.dll 0xc0000221 lack?

  I get this error for more than 2 weeks now.  I did not change anything or install/download anything. It says it is missing or damaged PSHED.dll error0xc0000221. I tried to use the vista disc to repair but it never works, it is said that he cannot fix.  I'm unable to start the computer because of all this help is appreciated!

  Hi Chiomaa,

  The file PSHED. DLL is part of the component that allows hardware errors to be generated.

  Since you are unable to boot to Windows, try to run a checkdisk boot from the disk Installation of Windows Vista.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  a. Insert the installation disc and restart your computer.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  For more information, see the article:

  BIOS: Frequently asked questions

  b. choose your language settings, and then click Next.

  c. in the System Recovery Options menu, click command prompt

  d. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  e. press y when you are prompted to check the drive the next time the system restarts.

  f. restart the computer.

  For more information, you can consult the following article:

  What are the system recovery options in Windows Vista?

  If the problem persists, then you should make a backup of important data and try to reinstall Windows Vista.

  For more information, see the following article:

  Installation and reinstallation of Windows Vista

• Vista - error when installing the drivers on the Satellite A100-788

  Hello

  I put Vista on my A100-788 (PSAA9) and drivers available on the french website of Toshiba.
  But, when I try to install the value pack (1.0.11BTN), the installation program to respond with an error message:

  .... NOTINSTALL... (I do not exactly remember the message, but it was NOTINSTALLTVALZ or something like that).
  Then the installation stops and get rid of me!

  What is the problem?

  Hello

  Hmmm without error exactly, it of not possible to say what could be wrong.
  I guess that you have a clean install of Vista on your laptop and also the BIOS has been updated.
  If this is not the case, do it!

• Equium A110-276: blue screen of Windows Vista error

  OK, so I installed Vista and works perfectly until I got a blue error screen! I don't know what the problem is. What you think is the problem? Memory? BIOS? I updated my bios to version 5 for vista... I updated my computer from here http://pc-support.toshiba-europe.com/vista/

  Anyone know the problem?

  I use Equium A110-276
  1024 MB OF RAM
  Core Duo 1.67 GHz
  Windows Vista Edition Home Premium

  Help please! THX

  Blue screen and Windows nothing unusual. Am I wrong? ;)

  Sorry, but it is not easy to say what the problem is here. I use Vista for two months without any blue screens and you really can't wait until someone can give you a clear explanation here.

  Blue screen occurs due to different circumstances. May be software related conflict... Check out the software for some compatibility problems

• Try to install SP2 for Vista: error 8024200B.

  Code 8024200B

  Try to install sp2 more than once now.  I get the error 'Code 8024200 B '.  I can't find a solution for this anywhere.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista - Error Code: 8007041D (cannot install updates)

  I use Vista 32 bit and it drives me crazy. I've never had a problem with the Windows updates until recently when I was bombed by mistake D 8007041 and virtually no updates by installing.

  About whenever I boot my laptop, it takes about 30-45 min to start up as a round trip you have windows important updates begins. The updates are downloaded and show as installed until it restarts and I get the message "updates were not correctly configured. Restoration of the changes. Do not turn off your computer.

  Later I check the update history, and every update has failed (i.e. 90% of updates) a 8007041D error code.

  The latest to be affected are:

  KB2158563 KB980436, KB981997 KB975558 KB2160329, KB982799, KB983589, KB981852, KB982214, KB905866.

  I tried a fixit from Microsoft with a similar complaint, who reported "the windows service install could not be accessed. This can happen if windows install is not properly installed. Contact us your support staff for assistance. » ???

  If anyone has an idiots guide to fix this growing problem, I would be very grateful. However, I speak swahili more as I do computer (I can say hello in Swahili and that it is), then please go easy on me and be silly.

  Ta

  You should have uninstalled the PC-cillin application & then installed subsequently ZA BEFORE expiry of the free trial period of PC-cillin.

  There is a good chance that you see the effects of a hijackware infection!