reinstallation of vista

Similar Questions

• I recently had my computer repaired with a reinstallation of Vista. I've also changed since my old modem to a router. Now the quality of the video is of poor quality.

  I recently had my computer repaired with a reinstallation of Vista. I've also changed since my old modem to a router. Now the quality of the video is of poor quality. But after the call to another specialist, is no better. I'm a little stuck and don't know what to do.

  original title: choppy video streaming

  Hello

  1. what browser do you use to watch videos?

  2. are you having this problem on all sites?

  If you use Internet Explorer, I suggest that you try the troubleshooting provided in the link below steps to solve the problem.

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294

• After the reinstallation of Vista (32 bit) I'm done with Windows and most of the stuff on the disk 1 (c), but with stuff on the disk 2 (d).

  original title: after reinstallation of Vista (32 bit), I found myself with Windows and most of the stuff on the disk 1 (c), but with stuff on the disk 2 (d). It's hard to backup.

  I wish all the disk 0, which is 250 GB, leaving the 1 free 500 GB disc to have been the repository of backup and archiving of others.  But I don't want to have to reinstall everything.  I couldn't move bootmgr, BOOTSECT. BAK and 'boot' folder on the disk 1 (c) by somehow the system partition?  Then there would be no OS stuff on disk 0 (D :); back, but better than mixed.)  What happens if I disconnect physically the smallest disk, Startup Repair will make the disc with Windows boot and system partitions? Thank you.

  Hi OldScientist,

  Before performing these steps, it is recommended to make a backup of your important data.

  Step 1: Mark Disk 1 (C) as active partition, then launch Startup Repair

  Follow the steps mentioned in the link below to mark C as active partition

  Mark a partition as active

  http://Windows.Microsoft.com/en-us/Windows-Vista/mark-a-partition-as-active

  Follow the steps mentioned in the link below to launch the Startup Repair tool

  How to use Startup Repair?

  If the problem persists,

  Step 2: Follow the steps mentioned in the article below to rebuild the BCD (Boot Configuration data)

   

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".

  http://support.Microsoft.com/kb/927391

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bootmgr missing errors illustrated the reinstallation of Vista

  Hi, (this is my first post)

  I noticed that my pc was running long-legged I ve tried everything and I had nothing to lose so I if I could start a clean condition, I had the Vista repair disks that I created using vista Toshiba disc creator, I used them and he said that he failed or something and the pc crashed everything. Now when booting via disk HARD I received this
  "bootmgr missing".

  So I tried to boot in the disks that I created with the software of Toshiba and I received the same error, I have no Vista installation DVD and I'm lost.
  What should do?

  Any help would be appreciated.

  Can you start installation of HARD drive?
  It is described under http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

• Can Vista - I save the updates already installed for the reinstallation of Vista?

  I want to completely reinstall my computer - destructive recovery or something, I think it is called. Can I record the existing updates on a disc or flash drive, so I have to download all over again? There are about 600 MB of them, so I wouldn't have to download them again.

  PS - I've just seen that it is a forum for Win 7? I'm on Vista, not Win 7. Thank you.

  Agios

  start all over again.  but one of the ways are here

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a4aed215-D236-4DA7-8292-81f8d3605976

• Sequence of patches after reinstallation of Vista Home Premium.

  I have an OEM copy of Vista Home Premium that doesn't have SP1 or SP2 on it (bought Vista before they came out).

  I just did a reinstall of Vista Home Premium (formatted hard drive).

  I started doing the update of Windows and got offered LOADS of updates, then after this I gave myself SP1. Then after that still more updates to update, then finally SP2. It took FOREVER.

  How can I shorten this process?

  Is this OK to put on SP1 (from CD) RIGHT AFTER the VISTA installed (before downloading updates), and then put on SP2 (from CD) after this (once again without any other updates)?
   
  Or Vista does expect some fixes to install before the SP1 or SP2 installed?

  Hello, Guilbert

  You can download the standalone versions and just install them immediately.

  There are a few prerequisite updates that must be installed first, which must be installed very well.

  Service Pack 1: Download the stand-alone update: 32 bit | 64-bit
  Service Pack 2: Download the stand-alone update: 32 bit | 64-bit

  Condition sine qua non for SP1:
  Download the update for Windows Vista (KB937287) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=5639710d-dfbf-4527-806e-9a1634d0cc8e)
  Collapse this includes this imagedownload the update for Windows Vista for x 64-based systems (KB937287) package now.

  Condition sine qua non for SP2:
  32-bit: download the 955430 package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=b1746a64-2bb5-4058-b133-d8264a0122cb)
  64-bit: collapse this includes this imagedownload the 955430 package now.

  Let us know if that helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• file extensions appears no not after a reinstallation of Vista HP

  After a computer crash I had to reinstall Vista HP, but now my file extensions are not displayed when you navigate to a folder

  Hello Elowan74,

  As you revenue to conditions in the factory by reinstalling Windows was disabled file extension option. This option is disabled by default. If you need it, you need to turn on yourself.

  1. click the Start button, click the control panel option.

  2. in Control Panel, click the folder option.

  3. in the window of the folder, click the view tab.

  4. in the view tab, scroll to the bottom of the list of options until you get to the section marked 'hidden files and folders '.

  5. search for the option "Hide extensions of the types of files known." marked

  6. remove the check mark (tick) in the box to the left of this option.

  7. click on OK

  8. your file extensions should now be visible.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• reinstallation of vista on the new hard drive without disc

  my hard drive failed completely and I replaced it but I do not have a disk of vista product. How to get a vista disk to reinstall on a new hard drive. I have the product key

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• After that reinstallation of vista I lost e and entered emails in windows mail windows calendar I can retrieve these

  After reinstalling vista I lost all the entries in the windows calendar and emails in windows mail can retrieve these

  Hello

  When you reinstall the operating system you wipe the hard drive.

  Depending on how you have reinstalled Vista:

  Look for a folder windows.old

  "How to restore your personal files after performing an installation of Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/932912

  And you can try this free program to try to recover data lost, etc.:

  http://www.Piriform.com/Recuva

  Other meanings, you will need to contact companies for recovery of data, which are very expensive.

  See you soon.

• Why after reinstallation of vista, no adobe flash player does not work.

  Before a reinstall of Vista, I use Adobe flash player.  Now, after having to reinstall Vista, Adobe flash player does not work. Can I get the videos to play?

  Hello

  1. try to watch videos online are you using Internet Explorer?

  2. How do you reinstall Windows Vista on your computer?

  3. what happens when you watch her watch flash videos?

  4. have you installed flash player after you have reinstalled Windows Vista?

  To work on the issue, refer to these methods.

  Method 1:

  If you are facing the question about Internet Explorer, see the following links.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Why Adobe Flash does not work in Internet Explorer?

  http://Windows.Microsoft.com/en-us/Internet-Explorer/help/Adobe-Flash-not-working

  Method 2:

  You can check if uninstall and reinstall the flash player help.

  Uninstall and reinstall the flash player and check if that helps.

  Uninstall Adobe Flash Player. Use the link below to download the flash player uninstall tool. Follow the steps mentioned in the link.

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  See section provided below for instructions on troubleshooting.

  Troubleshoot Flash Player installation | Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Note: The third-party products or services mentioned here are manufactured or provided by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Hope the information is useful.

• during the reinstallation of vista it asks you to install windows vista after each reboot. Authorization?

  I am reinstalling vista. He asked several times language. Go to the same screen.

  Copy of files, extension files, updated installation up-to-date. Is this normall.

  Hello

  It does not repeat.

  Here's how the normal installation method:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  See you soon.

• Reinstallation of Vista Home Premium on Home Basic on a new hard drive

  Hi all

  I don't know how to start my relocation.  Here is a little background and the problem:
  I was a stranger, and my hard drive crashed.  I had the hard drive replaced and the Windows Vista Home Basic edition is installed for temporary use.  Now back in the States, I would like to reinstall Home Premium edition (based) and all of its programs on my laptop and I'm not sure how to start.  I just put the disc in and go?  Or is it more that I'm missing?
  It is also necessary that I keep all my files currently saved on the laptop; so so simply by putting the reinstall drive in will require from a new team and wiping out my files, this is obviously not an option.
  Please advise!  Thank you kindly,

  Dane

  You must do a clean install from scratch, but don't want to because of your data.

  All you can do is a form of Basic Upgrade to premium want to keep everythibg instact...

  Startup Vista basic running > insert Home Premium DVD in player > do a upgrade.

  See you soon. Mick Murphy - Microsoft partner

• Why after reformatting and reinstallation of vista, it seems he used 20 GB of space, and I do not see what is used in this space... NOTHING else has added other then the drivers

  Had problems with the speed of the computer. He was never reformatted since bought 4 years ago.

  I reformatted my hard drive (disk recovery do not hit Yètè - 10 gig inside). I reinstalled Vista premium home from my dell disk edition. I added the drivers and began the labourous task to make the updates of windows (SP1 and SP2) and various others pushed at me. I have minimum one... IT set my free AVG antivirus protection. I have NOTadded from other programs or files/images etc. I have a drive hard 62 gigabytes and now only have 33 gig left to use!

  When I try and search which uses all the memory files add up only to a few 3 GB of space. What is using the rest of this space, where is it and how do I get to see it! ???

  as I said 62 gig disk hard - 3 gig of programs - 10 gig of recovery = I have 49 gig of space.

  but I did only 33 gig of space!

  Al

  Hi AlRomMaron,

  I suggest you to read the article: http://support.microsoft.com/kb/919183

  The additional 15 GB is taken up for the actual operating system (OS) as noted in the article (15 GB required for the OS)

• Extremely slow performance since the reinstallation of Vista Acer restore disk

  I have serious problems with my laptop since the reinstall Vista for my Acer recovery media.  The CPU usage goes to 100% whenever a program is open or a transparent effect comes into play.  An example would be allowing the Windows Sidebar and hovering the mouse over the bar to make the window fades.  He sees the jump to 100% CPU has not completed the fade in and out.  SD video play is more correctly, hence loss of images and speaker crackling and content HD is completely out of the question.  Web-based video streaming is possible and even simple tasks like opening the windows and web browsing is stupidly long wait time while the system catches up.  Even the pointer of the mouse leaves trails!

  I'll list the steps I tried to try to get to the bottom of this below.

  -Uninstall most software Acer
  -Reinstalled the graphics and the sound card drivers
  -Installed all the Windows updates available
  -Disabled Windows Update service
  -AV/Firewall software uninstalled
  -Checked starter and Services to search for suspicious programs
  -Scanned for viruses/Spyware
  -CPU Ran diagnostic tool (forget the name) - ran for an hour, no warnings or errors

  TaskManager is used, the processes using the CPU is what either the application is currently in use at this time (for example, when sidebar is faded, jumping to use upward in the process manager, then comes back down to 0 until another task is carried out), there is no single process using the majority of the processing power and no CPU usage is reported when the system is inactive.

  Any suggestions on what to try next?

  Hello

  You have installed something other than AVG?
  It was like that immediately after execution of the recovery?
  Why do you run recovery in the first place?

  You had a bad load of recovery, rerun it wouldn't hurt.

  You can also have a problem of material, in which case you will need to identify and replace the defective part.

  It is also possible that you have a rootkit, and moving requires more than a simple reformatting/reinstall. The answers to the above questions would indicate more precisely what direction you should take. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How can I fix the repair patch in media player without buying 7, or reinstallation of Vista?

  Is there a way to fix, fix, fix and get working again Windows Media Player in Vista without having to take a day or 2 to save then reinstall Vista, then replace all the backup files WITHOUT having to buy upward for Windoze 7 (that's why I bought Vista to get more XP crash-King).

  I see on the MS site under downloads that we can not download Vista WMP - unless of course, we buy Windoze 7 who installs it for us. I already have this pice of - job - 7 of Windoze.

  Getting very tired, time to fix repairs which crashed by patches.

  What poroiblems y with media player? Each of them. It will not load, play anything. He says only: he failed Duh!

  S

  PS why is the only forum on the entire internet which not only allow users use the mouse to highlight all the characters to copy or delete? Someone should tell boys in codeing there will not be a great success. In line won't kill profits.

  Is there a way to fix, fix, fix and get working again Windows Media Player in Vista without having to take a day or 2 to save then reinstall Vista, then replace all the backup files WITHOUT having to buy upward for Windoze 7 (that's why I bought Vista to get more XP crash-King).

  I see on the MS site under downloads that we can not download Vista WMP - unless of course, we buy Windoze 7 who installs it for us. I already have this pice of - job - 7 of Windoze.

  Getting very tired, time to fix repairs which crashed by patches.

  What poroiblems y with media player? Each of them. It will not load, play anything. He says only: he failed Duh!

  S

  PS why is the only forum on the entire internet which not only allow users use the mouse to highlight all the characters to copy or delete? Someone should tell boys in codeing there will not be a great success. In line won't kill profits.

  ==============================================
  Perhaps the following links would offer a few ideas:

  Windows Vista - solve problems in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  How can I reinstall WMP on Vista?
  http://zachd.com/PSS/PSS.html#reinstallvista

  Good luck...
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• error code 0 x 8007002 on reinstallation of vista

  Hi, I need help badly I wiped my laptop with a ghost disk its pack of callesd system restore and it wiped everything.

  I tried to reinstall vista but only go as far as puttin in mt production a key then to get an error code 0 x 80070002.

  my laptop just keep restarting auto asked me to put this in the command promt thing(rstrui.exe/offline:c:\windows) say it dose not unequipped I think that his my something to with my hard drive start ive not damaged, it somehow its only since I wiped it please help me

  my laptop is fujitsu siemens amilo li 2727 model ms2228

  http://TS.Fujitsu.com/support/

  If you use the recovery Partition on your computer which is the process of recovering from the manufacturer.

  Contact them in accordance with my previous answer, or try to ask in their Forums:

  http://TS.Fujitsu.com/support/forum/index.html

  See you soon.

  Mick Murphy - Microsoft partner