Reissue of links in batches of files using the Script

Similar Questions

• Creation Waveform TDMS file using the functions DDC_ in C 6.0?

  I'm trying to implement an export written in C 6.0. I can make the TDMS files using the DDC_ controls without any problem. But I can't understand how waveform TDMS files. I thought that if I added properties wf_ I should be able to define the waveform = Yes. But it seems to be more complicated than that.

  Here's what I work until now... (with the exception of the error handling to make it easier to see)

  DDC_CreateFile (sDestFileName, "TDMS", gszinfoline1, gszinfoline2, gszinfoline3, gszinfoline4, & hOutputFile);

  DDC_AddChannelGroup (hOutputFile, szGROUP_NAME, szGROUP_DESC, & hgroup)

  DDC_CreateChannelGroupPropertyTimestampComponents (hgroup,
  szCHANNEL_NAME,
  year (unsigned int),
  months (unsigned int).
  days (unsigned int).
  hours (unsigned int).
  minutes (unsigned int).
  wholeseconds (unsigned int),
  (double) fractionseconds);

  DDC_AddChannel (hgroup, DDC_Double, szCHANNEL_NAME, szCHANNEL_DESC, szCHANNEL_UNITS, & lphchannel);

  DDC_CreateChannelProperty (lphchannel, "wf_increment", DDC_Double, dInterval);
  DDC_CreateChannelProperty (lphchannel, 'wf_xname', DDC_String, 'Time');
  DDC_CreateChannelProperty (lphchannel, "wf_xunit_string", DDC_String, "s");
  DDC_CreateChannelProperty (lphchannel, "wf_start_offset", DDC_Double, 0,0);

  Any suggestions? (Details of this aid are intended for LV or completely absent)

  Thank you very much

  Don

  Hi Don,

  Thanks for the additional information.  After doing research a bit more, it seems that there are 3 required properties so that the property of waveform to be set to yes.  These are wf_start_offset, wf_increment and wf_samples.  If you add in a call such as the following, this should solve the problem:

  DDC_CreateChannelProperty (lphchannel, "wf_samples", DDC_Int32, 5);

  Just replace with the length of your table 5.

  Kind regards

• How to open the pdf file using the LabVIEW program

  I want to open the pdf file using the system exe, but this isn't the case. Can you help me?

  Thanks for your help.

• I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw to shlwapi.dll

  I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw in shlwapi.dll. How can I fix the problem.

  You have all your current updates?
  Go to windows updates and see if there are updates that you do not have installed.
  The error message seems to indicate that your copy of XP has not been updated.

  Updated and let us know if you still receive the error message.

  Thank you

  Marilyn

• Transfer files using the Personal Communicator

  All,

  Can I transfer files using the cell phone?

  Someone at - it a user guide and Administrator's guide on how to configure and use this installation?

  Thank you

  Lucian Medeiros

  No, you can't. You would need for this jabber.

  Q.	Cisco Unified Personal Communicator and Cisco Jabber for Windows can interact?

  A.	Yes, these two clients can interact.   Note Although features that are not part of the Cisco Unified Personal Communicator client. like the screenshot, video, desktop sharing and file transfer; are not interoperable between two clients.

  http://www.Cisco.com/en/us/partner/docs/voice_ip_comm/Jabber/Windows/9_0_1/b_jabber_win_faq_chapter_01.html

  HTH

  Java

  If it helps, please note

  www.Cisco.com/go/pdihelpdesk

• Generate class files using the WSDL url and wsimport

  I am trying to create a java application that hits the service exposed by hub.

  To create the application in java, I'm generating class files using the WSDL that is created and exposed by the hub.

  Executed steps:

  1 created an application in OPA.

  2. deployed on the hub (usinf deploy option of snapshot on Policy Modeling)

  3. in the deployment tab, I see the request and get the url of the wsdl by clicking on it.

  I try on this wsdl wsimport command. But it gives me following error messages.

  ---------------------------------------------------------------------------------------------------

  C:\***\AllFiles > wsimport http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL

  the analysis of WSDL...

  [ERROR] invalid WSDL http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL , expected {http://schemas.xmlsoap.org/wsdl/} html (line 2) data definitions

  Cannot read the WSDL document: ( http://localhost:7001/Hub/determinations-Server/assess/SOAP/Generic/12.2/AttemptOne?WSDL , because 1) did not find the document. (/ 2) the document could not be read. (3) the element the document root is not < wsdl:definitions >.

  [ERROR] WSDL:service is not found in the WSDL (s) provided:

  At least a WSDL with definition of at least one service must be provided.

  Unable to parse the WSDL file.

  ---------------------------------------------------------------------------------------------------

  If I store the wsdl file in a file on my local computer, and then run wsimport, it generates the classes very well.

  Can someone provide me with a way that I can generate the classes using the wsdl url and not the local file?

  Also, do I need to create a connection in the Connections tab on the hub?

  Thanks in advance.

  -Alain

  Looks like you could run in the user authentication when wsimport runs against the WSDL. Instead of the WSDL, its reception, the login page.

  The best way to work around this problem is perhaps what you do already - to obtain the wsdl and save them in a file.

  Another solution is to disable the restriction of connection to the Web Service API. You can do this in the menu on the users page (admin role can turn on and off.

  You can switch between a user and a password with the call of the WSDL file, but I don't know if its possible to do with wsimport

  See you soon

  Frank

• My creative cloud cannot happen on the adobe servers and when I tried to repair the host file using the creative cloud cleaning tool, it displays Error occurred while setting entries HF: 5

  My creative cloud cannot happen on the adobe servers and when I tried to repair the host file using the creative cloud cleaning tool, it displays Error occurred while setting entries HF: 5

  Please let us know your operating system.

  Concerning

  Megha Rawat

• Can I add watermarks to PDF files using the PDF package?

  Can I add watermarks to PDF files using the PDF package?

  Hi Susannah,

  Adobe PDF Pack does not allow to edit a PDF file. To do this, you would need Acrobat. We invite you to try Acrobat free for 30 days: see http://www.adobe.com/products/acrobat.html for more information.

  This help document describes how to watermark a PDF in Acrobat: add watermarks to PDF

  Best,

  Sara

• Loading multiple files using the same interface in ODI

  Hi all
  
  We load multiple files using the same interface and get the error "java.sql.SQLException: ORA-00942: table or view does not exist" while inserting record in the staging table. It looks like the same temporary table is used when loading multiple files and the error. Grateful if someone offers a solution to avoid this error.
  We use the following KMS:
  
  (1) LKM SQL file
  (2) IKM Oracle SQL COMMAND append.
  
  Receive a quick response.
  
  Thank you
  RP

  Hello

  See this http://odiexperts.com/interface-parallel-execution-a-new-solution

  Thank you
  Fati

• Is it possible to create a new file using the XML via java Script?

  Hello everyone,

  Is it possible to create a new file using the XML via java Script

  • I have xml information that need to use for file name, size.
  • Based on xml file we can create a new file in InDesign with java script?
  • Kindly help me if anyone has an idea about this.

  I use InDesign CS4 on windows 7

  Sample file is attached below.

  Kind regards

  Siva

  <UpdateAd>
  <AdId>3403699</AdId>
  <Width type="mm">91,79</Width>
  <Height type="mm">80,00</Height>
  <ProductionCategory>4</ProductionCategory>
  <BookedCCIColors>sw</BookedCCIColors>
  <WorkFlowType>PDF</WorkFlowType>
  <CustomerNumber>652224</CustomerNumber>
  <CustName1>Erich Prang</CustName1>
  <Description/>
  <Description2>R</Description2>
  <UpdateIns>
  <Titel>RHZ</Titel>
  <Publication>B2</Publication>
  <RunDate>26-07-2011</RunDate>
  <Zone>H30</Zone>
  <KDDATEN>nein</KDDATEN>
  </UpdateIns>
  <WorkflowStep>IR</WorkflowStep>
  <Proof>No</Proof>
  </UpdateAd>
  
  

  

  Try this:

  var f =File.openDialog ();
  f.open('r');
  var xml = new XML(f.read());
  f.close();
  
  var myDocument = app.documents.add();
  myDocument.documentPreferences.pageHeight = xml..Height+"mm";
  myDocument.documentPreferences.pageWidth = xml..Width+"mm";
  var rect = myDocument.pages[0].rectangles,add();
  rect.geometricBounds = myDocument.pages[0].bounds;
  rect.strokeAlignment = StrokeAlignment.INSIDE_ALIGNMENT;
  rect.strokeColor = myDocument.swatches.item("Black");
  rect.strokeWeight = 1;
  myDocument.save(File(f.path + "/" + xml..AdId + ".indd"))
  

  Substances

• Opening files using the InCopy layout

  How configure you a default to open all files using the InCopy layout? (CS5)

  Without any document open, go to the 'View' menu and select the Mode of disposal. On all of the files will be open in the corresponding mode.

• content of an export file using the datapump

  How can we see the contents of an export file using the datapump.
  As in the normal exp/imp method, if we use the parameter show = o during import, it displays the script/content of the dump file.
  
  Is there a method to do this in the datapump method?

  Use the Option SQLFILE

  Directory system/passwd Impdp = directory_name dumpfile = filename.dmp logfile = logfile.log sqlfile = export_scripts.sql full = y

• Is no vmdk file, but the script says, all virtual machines backed up Ok!

  Hello everyone;

  Please excuse any lack of details because this is the first time that I write. I've scoured internet for days now trying to find no matter how much detail that could help me solve the problem. I'm new in the world of script ESXi and ghettoVCB.

  My intention is to run several tasks on a schedule. Each type of backup (quarterly, monthly, weekly, daily and multiple) runs at a specific time. The planning section works very well.

  I'm hoping to solve this urgent backup, I should be able to solve reboot.

  Here is the command I use:

  /vmfs/volumes/datastore1/ghettoVCB.sh w /tmp/ghettoVCB-work.multiple f/vmfs/volumes/datastore1/vmlist-Multiple g/vmfs/volumes/datastore1/vmconfig-DataSet1-multiple-l /vmfs/volumes/datastore1/ghettoVCB_logs/ghettoVCB.Multiple_Backup.log

  vmconfig-DataSet1-multiple contains:

  # Multiple backups - rotation County 6

  #

  VM_BACKUP_VOLUME = / vmfs/volumes/Vault2-DataSet1/URANUS/Multiple

  DISK_BACKUP_FORMAT = thin

  VM_BACKUP_ROTATION_COUNT = 6

  POWER_VM_DOWN_BEFORE_BACKUP = 0

  ENABLE_HARD_POWER_OFF = 0

  ITER_TO_WAIT_SHUTDOWN = 4

  POWER_DOWN_TIMEOUT = 5

  SNAPSHOT_TIMEOUT = 15

  ENABLE_COMPRESSION = 0

  VM_SNAPSHOT_MEMORY = 0

  VM_SNAPSHOT_QUIESCE = 0

  VMDK_FILES_TO_BACKUP =

  Vmlist-multiple contains 1 server is listed:

  # List all virtual machines that are backed up several times a day

  HEAT

  The log indicates that the backup was successful - but it has not been the case. Backup size should be approximately 8 GB. However, when you look at the output folder, only the following files are here:

  
  

  HEAT.vmx

  STATUS.ok

  Question is now - where are the vmdk files that should be present?

  Output (-d debug) can be found here: http://pastebin.com/hMGphTL3

  So, here is what I observed:

  When you run the script, the snapshot only takes a few seconds to create and delete then. I'm seeing happens on the list of the tasks of vSphere Rencent (screenshot attached).

  If I create a snapshot manually - it will take much more time to create and delete a snapshot. The difference here is 6 minutes, and 4 seconds using the script create a snapshot manually.

  So my presumption is that he is not actually create the snapshot, although vSphere said it is being created. So why is it the case?

  Help, please.

  ADDENDUM:

  If I run the following:

  ./ghettoVCB.sh m HEAT

  The backup is successful.

  Your said he clearly did not config file to back up all files hard.

  VMDK_FILES_TO_BACKUP =

  I expect to see something like this if you want all the hard files

  VMDK_FILES_TO_BACKUP = "all".

• How to use between operator in Disqualification without using the script processor?

  Hello Experts,

  How to use between operator in Disqualification? for example phonenumberLength between 7 and 10. I don't want to use the script processor? Also how to reproduce the SWITCH statement Disqualification CASE?

  Thank you

  Konate

  1 Add a processor 'check the length.

  2. connect the transformer and open the configuration dialog box

  3. in the tab 'Attributes' select your attribute of telephone number as the "field Check.

  4. in the tab "Options", enter "7-15"in the option 'number of valid characters.

  5. run the process.

  a. accounts with [included] a character length 7-15 phone numbers out of the release of "valid".

  b. records with a length of character <7 or="">15 phone numbers out of the release of "Invalid character count.

  Note: the processor also adds a 'LengthValid' flag attribute which you may also branch on [with the values "Y" and "NC" for both scenarios above]. See Library of processor of the online help for more information.

  Thank you

  Nick

• help to change the size of precomp (weight and size using the script)

  Hi guys, need help with change precomp size (weight and size using the script), my problem in this... when I change the size of the model (height and weight) of GUI AE, AE change the size of the composition of the Center model, but if I change the size of the model of my script it change from upper left... so I need some how change in the center of scripts of composition or something like that?

  now I change size with this code

  MyComp.Width = myComp.Width.Width + 50;

  MyComp.Height = myComp.Width + 50;

  Hi Zipkiev,

  If you want to change the composition and all the layers it contains, there is a script: scale Composition.jsx that comes with Ae (in the Scripts folder) which does exactly the same thing.

  He puts on a scale by a factor uniform using a temporary null object. You can twist no uniform scaling by a factor.

  But if you want only to preserve the size of the layers and adjust their position so that their new position relative to the new comp Center is the same as previously, the script above can not help.

  In the simplest situation you just compensate for all positions of layers related by the same amount: [(compNewWidth-compOldWidth) * 0.5, (compNewHeigth-compOldHeight) * 0.5].

  Not sure it will work well in all situations (such as 3D with cameras).

  You can try it, it might work for you:

  COMP is the composition, newWidth, newHeight its new width/height

  var

  DX = (newWidth - comp.width) * 0.5;

  DY = (newHeight - comp.height) * 0.5;

  layer, n,

  p, j,

  value;

  COMP. Width = newWidth;

  COMP. Height = newHeight;

  for (n = 1; n<=comp.numLayers;>

  layer = comp.layer (n);

  If (layer.transform &! layer.parent) {}

  p = layer.transform.position;

  If {(p.numKeys===0)}

  p.value = value;

  value [0] += dx;

  value [1] += dy;

  p.setValue (value);

  }

  else {}

  for (j = 1; j<=p.numKeys;>

  value = p.keyValue (j);

  value [0] += dx;

  value [1] += dy;

  p.setValueAtKey (j, value);

  };

  };

  };

  };