Related to the upgrade of Windows 2008 R2 Standard for Windows 2008 Enterprise

Similar Questions

• Question related to the upgrade to Windows 8.1

  I currently have a HP laptop with 4 GB of Ram and 64-bit Windows 7 SR1 running. I'll give this computer to my wife, that his old bridge is going Tango-uniform (UT). I bought a new Lenovo SmartCheck S535 with 6 GB Ram 1 TB of storage. It came with Windows 7 SR1 already on board and he also included disks for Windows 8.1. First of all, I did a set of boot rescue disks and start them on the side.

  But now, I have a question, do I have to transfer my files from HP to Lenovo so that both use Windows 7 SR1? Or. should I go ahead and upgrade the OS and transfer the files.

  I'm sure that happens with a lot of people, there will be a lot of programs that I keep less re - install on the new computer. They are trash who are picked up along the way for those of us who use or service of computers as often we brush our teeth. Oops... maybe it's not such a great comparison, but you get what I mean!

  So, I would be very interested to hear your advice, your success, Yes and even a failure or two, all for the purpose of education.

  Thank you and I look forward to hearing from some of you.

  SteveG

  Original title: which came first - the chicken or the egg? (So to speak!)

  As a system dual boot, the only place where the 2 operating systems interact is the bootstrapper. Windows 8 will take the priority, is somewhat different, as far as it goes, and if you select then Windows 7 system reboots so it can do a little slower. Of course, there will be a loss of disk space but you are then also 2 installs of Office and everything else.

  If you were to go down the possibility to buy a kit Windows 8.1 you avoid the need to do a complete reinstall, because it will improve instead. You also avoid the need to run the upgrade of the store from 8 to 8.1. You must decide if the cost is justified, but in your situation, I would seriously consider that option as well.

  Even if I'm not a big fan of Windows 8 I made the full switch and are accustomed to him, I'm sure you will as well.

• Pavilion dv6700 entertainment: loss of sound on pavilion dv6700 since the upgrade to Windows 10

  Since the upgrade to windows 10 I lost my audio... can not play MP3 music and the system sounds don't work... wanted for driver sound card and found three recommended... each of them has reported a hardware not found... decided to reinstall the driver of sound card on my install of windows 7, as luckily I backed up all my drivers before moving on to OS10... even if it is installed, still no sound... removed devices and drivers and let the laptop reinstall after rebooting... do not know what else to try... do not believe that there is a sound muting function key that I do not know... Thank you

  UPDATE...
  just try the idea of setting frequency to 16-bit 9600, but I got no sound error box [...], then is alle went settings improvements where she has low etc etc settings has been disabled so it allowed without choosing any of... then I went back and changed the default frequency which is 24 bit 19200... then told me not supported by this device but then miraculously it worked... have now all music sound restored windows all... don't know if still have windows 7 driver... it is MS 2008... really afraid to update the driver because it is all now work... don't know how I fixed it but, was it a particular action? or a combination...? Maybe this might help others...

• Cannot connect to internet after a reboot before you uninstall and then reinstall the network card. (After the upgrade to Windows 7 from Vista)

  This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit).  Again, I want to remind that I never had this problem before installing Windows 7.

  -After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar.  (It was how I was welcomed after the installation of Windows 7 is said by the way).

  -The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.

  Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)

  Driver provider: Microsoft
  Driver date: 14/05/2009
  Driver version: 7.2.1127.2008
  Digital signer: Microsoft Windows

  Thus, we have solved the problem! There are two possibilities of your problems:
  1 company Adobe uses the Bonjour service , this service should be disabled.
  Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!

  2. If it is not signed as Bonjour service. Try to disable the service:
  Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).

  It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!

• After the upgrade to windows 10 missing MSCVP110.dll

  Hello

  After the upgrade to windows start 10 lack MSCVP110.dll and no app.

  I have uninstall and install redist visual x 86 and x 64, but it's the same thing.

  Help!

  Hi ambredoreau,

  There is a specific problem of windows OS, I will recommend you to contact windows support team.

  But I found a useful link, please relate to her Halo Spartan Strike - MSCVP110.dll - Microsoft community.

  Check out this link Windows 10 and Adobe Creative Cloud for application compatibility.

  Kind regards

  Nicos

• FN keys do not work after the upgrade to Windows 10

  Why the FN keyboard does not work after upgrade to Windows 10?

  FN keys are controlled by utilities and special tools of Toshiba. Usually after the upgrade to Windows 10, the parts of the pre-installed Toshiba software must be upgraded to version compatible and support Windows 10...

  You have not provided information on the laptop model so I can't say with certainty if your unit is 10 Windows supported or not...

• Satellite P855 - function keys do not work after the upgrade to Windows 10

  Function keys do not work after the upgrade to Windows 10
  I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
  Anyone know when and if it will be available?
  Thank you

  I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.

• Satellite U500 - 11G - cannot activate the upgrade to Windows 7

  Really sorry to this topic, but with the new Satellite U500 - 11G can not activate the upgrade to Windows 7. Keep told by entering the serial number that it was origonally installed with Vista, but no info on how to activate it.

  Any help here please?

  Hi mate

  The Toshiba pre-installed Vista OS has already been activated.

  AFAIK if you upgraded the operating system Vista to Win 7 using the Toshiba Windows 7 upgrade kit then a Win 7 must be already activated and does not need to be enabled separately

  See you soon

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• Problem with a keyboard key of T440 after the upgrade to Windows 10

  Hello world

  I have a Brazilian keyboard layout (ABNT2) on my T440 and I am facing a problem after the upgrade to Windows 10. The new version of Windows recognizes this key:

  

  As long as the "CTRL on the right" (commom on other layouts).

  Everyone was faced with a similar problem or have any clues as to what might solve this problem?

  Thanks in advance,

  Felipe

  Solved.

  Do more research, I fount out is an old bug with Lenovo's Thinkpad laptops with this Brazilian keyboard.

  If you are facing the same problem, use this registry tweak and the problem is solved:

  http://ZTop.com.br/WP-content/uploads/2009/11/thinkpad_abnt_win7.zip

  (the file name indicates "win7" but it also works for Windows 10)

• Re: Satellite A500 - FN key does not work after the upgrade to Windows 7

  Hello
  The FN key does not work even if I have (Toshiba Value added Package) and (toshiba flash Cards help).
  Happened after the upgrade to Windows 7 and using the upgrade CD to retrieve all of the tools and utilities.

  Satellite A500 - 134

  Try restarting Flash cards.
  Start > all programs > Toshiba > utilities > restart Flash cards.
  After doing this press FN button several times.

• Photosmart 7762: Photosmart 7762 small print page in A4 since the upgrade to Windows 10

  I have just updated to Windows 7 to 10.  When I go to print an A4 document now doing at a reduced size that I have an additional border of space to the left and down.  The page is set to A4 of the printer is set for A4 and I tried printing and printing actual size to fit, but it makes no difference.   I deleted and reinstalled the printer so that it would probably use the most recent driver, but even when it makes no difference.

  HELP PLEASE

  (PS. My old LaserJet 1200 always print the same document A4 correctly after the upgrade to Windows 10)

  Problem solved.

  First tried to download HP printer Installation Wizard, which is installed as a brother of generic but with HP Photosmart 7760 showing when you click above but it just printed pages of random characters.

  Then the printer found possedantes-advanced-new pilot and started to windows update and it evetually listed series printers so I clicked it and now it prints A4 OK again.

• HP Stream 13: Beware of the upgrade to Windows 10

  I have just told me that in Hp Support the HP 13 Stream is not recommended for the upgrade to Windows 10 due to the lack of space and memory for this new operating system.

  I thought it would be interesting as well as alarming to soemwhat.

  This occurred after I contacted them for help and a solution to a failed update of the ' Intel dynamic and thermal Framework Client Driver SP 72416.  As a result, I did a sfc and dism scan to check the status of the file system and the final result are reports of corrupted files and source files could not be found.

  I should add that at the moment windows 10 works very well on my stream and a recent update of Windows loaded and installed ok. I currently 11.5 GB of free space on the C drive.

  HP support recommend reinstalling windows 8.1 provided to ensure a workbook entirely for the present and the future, because they anticipate the future updates and developments with Windows 10 is likely to produce more problems with the stream.

  Now this threw me after all the recommendations pushes and apparent and challenges for the upgrade of this small notebook with 10 Windows. I'll hold fire for now with other changes, while I go over what to do next.

  Someone at - it something to add?

  L

  Delete all partitions is mentioned in the link that I sent, all partitions are displayed and you can highlight each and remove them:

  -Select: ' Custom: install Windows only (Advanced)»
  -Delete all partitions.

• Pavilion dv7-6b20ex: since the upgrade to windows 10 I get the update message error 0 x 80240017 Windows Defender

  hi..

  Since the upgrade to windows 10 I get the update message error 0 x 80240017 Windows Defender

  I hope to have useful response... Thank you

  This letter specifically;

  Updated definition for Windows Defender - error (definition 1.203.2341.0) KB2267602 - 0 x 80240017

  Updated definition for Windows Defender - error (definition 1.203.2341.0) KB2267602 - 0 x 80240017

  https://support.Microsoft.com/en-us/KB/918355

• Pavilion g6 2213 its drivers needed for Windows 7 when you run the upgrade to Windows 8.1 failed (lots!)

  Hello

  After the upgrade to Windows 8.1 the OEM of Windows 8 my machine on the ground to stop. I looked at some common problems, but there are just to many to test when my machine is so slow. Right click takes about 10 minutes to display the menu to give you an idea.

  To make things worse, I tried to do a reset of the HP recovery but it kept also, failing a lesson well learned to create additional recovery CD!

  In any case, I have a copy of Windows 7 but HP does not support this OS on this system, I searched this forum but can't find anything particular about my model number and drivers Windows 7.

  A point in the right direction for Windows 7 drivers for this system would be a great help or advice for me to use the machine on the 8.1

  See you soon

  Hello:

  Your model is pretty easy to install W7 x 64 on.

  If you let me know which model of laptop wireless card is came with, I'll post the link to this driver too.

  I don't think the drivers wireless since the page g7z-2100 driver will work.

  Here are links to most of the drivers you need:

  First of all, download and install the AMD chipset driver and restart.  To install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  You can then use all the other W7 x 64 drivers and software the g7z-2100 on the link below (except maybe the wireless).

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275619