Relative sizes

Similar Questions

• Resize transitions and relative size components.

  In my coding style, I tend to indicate a relative sizes (width = "50%"). It is, IMO, the best way for business-driven applications.
  
  Now, I'm working on a module that uses a lot of transitions (mainly resizing panels). To do this, I found that because I use relative sizing, asking instead for a Panel to grow, I have to ask the other panels to become smaller (< mx:Resize HauteurPour = '0' / >). When I want these boards to return to their original size, I can't use < mx:Resize HauteurPour = "100%" / > because resizing does not accept relative size. Instead, I use AnimateProperty to the percentHeight but who don't feel well, and the result is a bit erratic.
  
  So, I asked, is my programming style gets in the way my goals? Should I use pixel-based sizes in this module? I would like to hear your ideas on the subject.

  Thank you, Greg.

  I was thinking about my screen to use the layout constraint based as much as I can and I ended up with a hybrid solution quite nice. Now all transitions works very well.

  In the future, I will try to use as much as possible based constraint implementation. Flex seems to work that way better.

• @RELATIVE ({size},-1) feature

  I'm developing a business rule in an environment I can't experiment in particular in and ideally, the technical reference Oracle ignores how the @RELATIVE function works when you specify a level and acting on a level member.

  So my question is: if I correct @RELATIVE ({cost center},-1), then select a level 1 (California) cost center in my form. Which of the following results set?

  R: California

  B: California, Texas, Rhode Island, etc. (all US States)

  C: something else?

  The children of California will be returned.

  I don't know what you have in your hierarchy below California (and my US geography isn't very big!)

• Bar does not appear correctly the relative size of ScrollBar

  I'm not sure of the right terminology please bear with me. In CS4 when I Zoom in on an image, the bar downstairs would show the size of the image now on the screen compared to the size. know if I pass the bar from 50 percent to 100 percent would be half that size indicating that I see only half the picture. At least, I think that was the case in CS4.

  Here's and example of CS6.

  1. Open an image, choose 'Command-0' to make it fill the window, and the percentage of 48,16%. The bar downstairs is not there, but if it was I suppose that he would fill the width of the window.
  2. I select "command-+ ' to zoom in, and the percentage increased to 50%. The bar fills now about 30% of the width of window indicating I zoomed in a lot, but I did not. There is only a little image on each side not visible, the rest is a huge grey area that extends from left to right and top to bottom.

  How do the bar indicates the true amount of zoom, and how do I get rid of this grey area?

  I wonder if you have enabled in cs6 Application Framework?

  Window > Application frame.

  I believe in cs4 and cs5, that part of the application is not on by default, but in cs6 is.

• How to get the Panel to display thumbnails of the boundaries of the layer instead of document of toentire relative size?

  There is an option for this, but it only partially works... and I was wondering if there is something else I'm supposed to know about to make the feature work as described...?

  I can activate the option to display thumbnails... transmission in works for the bitmap stuff.  None of my vector masks are shown in the size of their layer.  (Note - I layer in the form of transparency disabled - which means that the layer is shaped by the vector mask and not any content.)  It is verifiable by checking the option to display the boundaries of the layer).

  Yet, when I do this, it's obvious on the biggest screen (if the boundaries of the layer are displayed), than the vector contains the complete layer.  But in the thumbnail, I often can't even the shape of all , not very useful.

  So what don't understand me?  How can I get thumbnails of vector to display the size of their layer?

  Thank you!

  I think it is supposed to work this way - vector layers are basically always full document size and the path determines only the pixelation and the visibility of the content based on the rule of filling in the path box. Don't say that there could be no way to determine the bounding box on the fly and use it for the thumbnails does not, but I do not know there is a certain reasoning / logic for this behavior. I guess it is also a matter of preference - in Illustrator, it's like that and it makes me crazy, because we never see where the substance is compared to the artboard.

  Mylenium

• How to adjust the relative size of the two halves of a circle when cut?

  If you do type on a path in Illustrator on a circle, and you cut the circle in half 50-50 to get the type of the right way to the top in each half - you can set the half to make it 60-40 for example or any other proportion (to allow to change the length of the text in half superior)?

  Or do you cut the circle in the exact spot you need every time?

  Like this..?

• How can I increase the size of location box and decrease the size of search box? The location was smaller and more small while the search box took the reports.

  The location box is so short, I don't see the url I type in, for example "yahoo.com" while the search box is so long that I can type a whole sentence in

  Place the mouse pointer between the address bar and the search bar, and it will become an icon of resizing that you can drag to the right or left to adjust the relative size of the two bars.

• I'm trying to reduce the duration of the google navigation and search boxes without any succuss. Numerious times the site was requested, but no response is the problem. I can change the size by using the line that separates the two boxes, but I only

  I added a cus 06/25/10, wanted to shorten the google search and navigation bars to see, but can't. Have re-installed the google toolbar, have chosen the version of firefox as my default tool bar and can then change the width, but when a box shortens the other if extension always fill the width of the screen. Customize toolbar doesn't give any options to reduce the width of toolbar, I am at a total loss. Would love suggestions if you have correctly fixed this.

  This has happened

  Each time Firefox opened

  is 25/06/10

  The address bar and the search bar have a flex property and take all available space.
  You can change the relative size of the two with this resizer between two bars.
  You can only do this by adding a lot of space in the view > toolbars > customize window.

  You can set a fixed width by defining the min-width and max-width for the same value.

  Add code to userChrome.css below @namespace.
  See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #urlbar-container {max-width:400px!important; min-width:400px!important;}
  #search-container {max-width:200px!important; min-width:200px!important;}
  

  You can choose your own values as long as the min-width and max-width for each bar have the same value.

• change the point size of overset text paragraph style

  Hi guys,.

  I can't work this at all.

  I want to gradually reduce the size of the text in a block of overset text.

  I want to reduce the relative size of each paragraph for example, body text style is 9pt and 10pt subheadings, so the body of the text should reduce 8.5pt and subheading 9.5 ft.

  myDoc var = app.activeDocument;

  myTextFrame = myDoc.textFrames;

  for (i = 0; i < myTextFrame.length; i ++) {}

  While (myTextFrame [i] .overflows)

  myTextFrame [i]. ParagraphStyles.everyItem (.pointSize) - is 0.5;.

  }

  That's what I have, but I can't seem to access paragraph styles.

  Any suggestions?

  [Jongware] pretty much answered that question in your previous post: reduce the size of the text in a text overset frame

  [Jongware] wrote:

  1. for (i = 0; i
  2. {
  3. {while (App.activeDocument.Stories [i]. Overflows)}
  4. app.activeDocument.stories [i] .pointSize-= 0.5;
  5. app.activeDocument.stories [i] .recompose ();
  6. }
  7. }

  (Note that the text of the story gets the same size. "I hope that this is not a problem with your text.)

  Yes, it says that all of the text of the story will have the same size text applied... but it is a simple amendment to add a loop for () to run lines 4 and 5 through each paragraph in the story rather than the full story. Try this and see how it goes.

• Incompatible font with a follow-up 3D camera size

  Hi all

  I have some mobile photos who need stocks on caterpillars. I opened my shot in AE went to Effects > 3D tracking camera > selected a trackpoint, click right and added my title and a camera. The first shot is superb! The title remains with the image and the character settings are just how I would like it.

  I go to my next shot to do exactly the same thing, I followed exactly the same procedure, but this time the police is a different size, even if the parameters of characters are the same. Even if these two fonts are 30px they show that radically different sizes. I can't get to eyeball the size and race for each shot, which is not ideal, since it is a professional job.

  I tried this with multiple injections and he continue to occur. Any suggestions?

  Thank you!

  I go to my next shot to do exactly the same thing, I followed exactly the same procedure, but this time the police is a different size, even if the parameters of characters are the same. Even if these two fonts are 30px they show that radically different sizes.

  Text in Ae have 3 parameters that control its apparent size on the screen (without taking into account the effects or text animators): the size of font in pixels which is a setting within the character Panel, scale and position Z in 3D.

  If your text is 30px you still 2 variables that can change. When you add your text to a target in the 3D camera Tracker, Ae does this to his account and creates this arrangement of z scale according to the size of the target you set in 3D Tracker and camera information. This makes it quite unpredictable as to what exactly the size or position in Z space/scale you're going to get finally = the appearance of your text on the screen is different from each shot. each track is different because each point tracking in 3D space is different and every camera movement is different - as you can see that there are many variables so you can not predict that the text will be the same size.

  You can somewhat control the relative size by increasing or decreasing the size of the target

  

  

  

  I can't get to eyeball of the right size and the race for each shot,

  no doubt. There are ways to make it easy on yourself - you can work with snapshots.

• How can I know the actual size of the type in a document of intent 'web '?

  I'm designing a document for iPhone 6plus pixels (1334 x 750) and need to know how translates the size. For example, when I call a text 30 PT., in the real world on the iPhone it's something much smaller than this... maybe 12 pt. This has something to with the number of pixels in the canvas... but how to convert?

  So, how to calculate the actual size of the type? I'm not good at math, I need to be told how to do it.

  For the output and display at 100%, InDesign defines the physical size of a pixel as "1/72, so the relationship between the print type size and displayed size of the iPhone is a simple report. For the iPhone6 72/326 Gets the relative size of the print to display discount, and 326/72 would be a multiplier. So to display 12pt type how it would print, set it to 54.4 pt (12 x 4.53). Or, to view a 1 inch by 1 inch square, resize it 453%.

  For the iPhone6 more the multiplier is 401/72 or 5.57

  Apple - iPhone 6 - technical specifications

• Foot of logo to several images of different sizes

  Wonder if there is anyone who knows if there is a quick way to add a footer logo to several images of different sizes (which I think is why action is not an option)? / Niklas

  If you place a version of the footer that is wider than the images and the preferences are set as a result he will be fit to width.

  Then you could use the relative size of canvas and align the foot down a select all.

• How will I know "the size of a table special VS size of RAM"

  Hi all

  How will I know "the size of a table special VS size of RAM"?

  I should know because I want to understand what join method to use.

  Please correct me if my attempt to catch the truth is crazy.

  Thanks in advance.

  You can get the size of a table of DBA_SEGMENTS.  I'm sure you can get the amount of RAM of other tables of data dictionary as well if you can define precisely what memory segment you are interested in (e.g. CMS?)  PGA?  The amount of physical RAM on the box?  The size of the buffer cache?  The amount of virtual memory available?)

  That being said, comparing the two is not as significant.  You, as a developer, are generally not in the business of choosing a join method.  It's the job of the optimizer.  And the optimizer takes into account a range of data that you have not begun to ask about yet.  The size of the table is not even particularly relevant for calculations - the optimizer the amount of data operations are back, the relative size of the data on each side of the join, the availability of indexes, etc. are all much more important than the raw size of the table (but the raw size of the array is a factor in the assessment of the amount of data that is returned).

  Justin

• The file size and resolution

  Hello, I am currently working on a graphic that is displayed on the web. The file size should be 1000 x 1000 pixels and the size of the image can not go more than 250 KB. My picture is to the size of good size, but it is at least 947 kbs.

  How can I change the size of the file to 250 KB without losing the strong resolution?

  We have the options to save the file as a jpeg, png and gif.

  Hello!

  Start by opening the image in Photoshop, by clicking on the word 'File' in the menu bar, mousing down to 'save for Web '. The record of the Web dialog box is displayed.

  Click on the tab "4 - Up". Now you click on the four components, use the drop-down menu (circled in red below) preset to select different options and compare their relative size of the quality and the file.

  

  In the example above, I've decided to save my image as a JPEG quality closest to the original image while reducing the size of the file in the range I need. So to save this version, I click the pane at the top right corner of save for Web dialog box and click Save.

  According to the type of image you are editing, your best results can be PNG or GIF.

• Size of the Cie and collage is wrong

  Hello

  I'm copying and pasting from one image to another

  The image im copying is smller then where im sticking to

  but when I paste; It takes the entire page size upwards and I want it to be his originl size

  The image that im copy is 85 x 54 mm and the image im coying on East of 22 mm x 44 mm

  When he glued take all 22mm upwards

  I tried to copy the image enlarged on a page of fees but it resizes new small rear auto?

  The ppi of the background image of resolution determines the size of what it is pasted. First check that the two images have the same resolution (Image > resize > resize the Image) and that should give you a more realistic idea of the relative size before pasting.