Release Build empty graphic

Similar Questions

• Why the telemetry is enabled by default when the support page says it should be disabled in release builds?

  Page at https://www.mozilla.org/en-US/privacy/firefox/#telemetry says telemetry functionality should be disabled in release builds by default. I've just updated to 34.0.5 and it is activated. I know not if, in an earlier version is enabled and he kept the same State, but I never manually put it on.

  Hello itabirca, just to be sure: you look at the options > advanced > choosing data to check if the extension has been enabled?
  have you used a beta version of firefox or the testpilot addon in the past?

  https://wiki.Mozilla.org/telemetry/FAQ

• Export release build crashing in appworld test

  I'm developing an application BB10 and on both debug and run options with Momentics IDE works app.

  The problem comes when I am doing export release build. Then the application does not start, not even the splashscreen.

  Could be cause by a bad created .bar file?

  I tried to submit the application for the Blackberry world, and they have the same problem.

  Well, then you have a problem of signature.

  Look through this and confirm that you have followed all the steps...

  https://developer.BlackBerry.com/DevZone/blackberryworld/preparing_your_app_for_blackberry_world.htm...

  Click on the links on this page to ensure that you have.

  If you think it's OK thanks for posting your record bar - descriptor.xml.

• Cannot export release build

  Hello

  I created an application based on the Bluetooth SPP cat example, I now release and submit to the BlackBerry World for sale.  However, whenever I try to build the application, I get an error complaining an invalid active path.  I tried everything I could think of to fix the error, but I'm in over my head here and don't understand what goes wrong.  To verify that my key works, I've tried to sign a simple "HelloWorld" application and the release of build has worked well with this app.  However, whenever I go back to my app built based on the example of cat Bluetooth SPP export version build fails.

  I then decided to try to do an export release build on the example of cat Bluetooth SPP directly and I found myself with the same error.  He is shown below.

  Package failed: 1
  Error: Path access valid asset 'arm/o.le-v7/libbluetoothsppchat.so.1.0.0 '.

  If someone can please help me with this problem I would really appreciate it.  At the moment is to prevent to release my app World de BlackBerry and I'm not very happy about it, especially after I spent a lot of time to get the application going in the first place.

  

  Wow, I spent so much time on it and the solution was right under my nose...

  http://supportforums.BlackBerry.com/T5/Cascades-development/can-t-export-for-release/m-p/2091503#M11...

  No need to answer.  Soon all the world!

• Export release build error

  I have my loan application. It does not correctly work in the emulator. Now, I want to create the version that I can submit to the App World. I use Flash Builder Burrito. That's what I do.

  1) click Project > export Release Build from the main menu.

  (2) select the location where to save the file to.

  3) click on the button "Finish".

  When I do that, I get the following error.

  Error occured while packaging the application
  
  C:/Users/houselaptop/MyFirstApp/bin-release/Main-app.xml(10): error 105: application.initialWindow.content contains an invalid value
  
  C:/Users/houselaptop/MyFirstApp/bin-release/Main-app.xml(10): error 105: application.initialWindow.content contains an invalid value
  
  Error: AIR validation failed
  

  This is what looks like my hand - app.xml

  
  http://ns.adobe.com/air/application/2.5">
      com.myfirstapp
      myfirlstapp
      MyFirstApp
      1.0.0
      A simple app
      Home
      
          [default]
          
          none
          true
          false
          landscape
          false
          true
      
  
  

  Any help is appreciated

  Hello

  Since I use CLI tools only, I've seen this error.

  for:

  
  [default]

  I put in the name of my hand. SWF file where you [default]

  Harry

• Cannot export release build for AIR app...

  Flash Builder 4.7 won't let me export a release build for AIR applications to all the...

  All started when I wanted to make some changes to an old AIR application.  Could not even run in the debugger, so I updated the AIR SDK (using instructions available here: http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html and here: http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk.html )

  So after doing all this and a few other changes, I finally got my AIR application to run the debugger in Flash Builder 4.7.  The changes I wanted to make, and then tried to export Release Build...  Kept giving me an error "Incorrect password for this certificate" every time that I tried it - but she would never let me enter a password.  I went to the project. Release Build, export and on the first screen, I have to click on 'Next' and he jumped directly to the compilation, jumping on the screen where you are supposed to be able to enter the password and certificate information.

  Thought that maybe because it was an old AIR project, which was causing the problem.  So I started a new project AIR - one very simple with just a < s:Label > inside a < s:WindowedApplication >.  Project | Properties | Flash Builder package and created a brand new self-signed certificate (which seemed to work) but once again trying to export release build, he wouldn't let me get to the screen where you enter the password.  By clicking 'Next' in the first screen on project | Export Release Build jumps just directly to the compilation and (of course) it gives me the error of Incorrect password, because he never gave me a chance to enter the password.

  So what is happening here?  Why not export commercial versions for AIR projects?  It's extremely frustrating - Flash Builder 4.6 never gave me problems.  What can I do to fix the Flash Builder 4.7 so it does not work with AIR projects?

  Thank you

  L.

  Was having the same problem and totally by chance (with a mix of frustration) I went to move the window and accidentally resized it... and low and behold the rest of the content window popped up as if she had a label 'hidden' on this subject... a collueges had the same problem on a windows and mac machine and it was resolved in the same way... I hope this helps someone...

• Export release build, not including data XML files in the apk package

  Hi, all.

  I have a flash pro project I packed for AIR according to these steps:

  http://Renaun.com/blog/2011/09/using-Flash-builders-mobile-workflow-with-Flash-professiona l-projects.

  There are two differences:

  1. I am loading XML from right next to the swf files
  2. The Flash Pro project and the project Mobile share a directory that is outside of these two projects (this was the workflow already established in the public Service, given that several sovereign wealth funds share the same XML file).

  When I test this on my phone, it adds the XML files to the apk and everything works great. The problem I have is that the export Release Build does not include XML files, and I don't see anything in the Flash Builder interface that looks like it will allow me to add more files than the swf file and the app.xml.

  

  What Miss me?

  Love - your comments helped me to think about this and get to the essential part that missed me. I've marked it useful, because it has shown the way.

  I'm not a big fan of scoring own "correct" answers, but I'll do this time so that people can easily find the steps.

  The error I thought that the "Debug on the device" was wrong to get an AIR debug version, because the swf file was not a debug swf.

  I did not understand that if I clicked on the button run, it would also be a version out to push to the unit, and that this version would not give the message "waiting to connect to the debugger.

  The entire process that you get when you click on 'Run' is a little weird (I say this to those who have never tried). It will install the application on the device, but does not launch (I think that this is impossible). Flash Builder crashes and then in "Installation application to the device. If you look at the screen, you will see a new download in your notifications bar, and from here you can launch the application.

  To summarize:

  1. To start your swf Flash Pro package for Air using Flash Builder, follow the steps in Renaun (http://renaun.com/blog/2011/09/using-flash-builders-mobile-workflow-with-flash-professiona l-projects /)
  2. Doing this work on Mobile, you have probably installed on your phone in debug version. This uninstall using Astro File Manager (https://play.google.com/store/apps/details?id=com.metago.astro&hl=en)
  3. Instead click the "Debug" button in Flash Builder, click on 'run '. This makes an apk without debugging and pushed back them to your phone (if your Setup allows debugging of the device).

  Additional notes: If you have xml files that are packaged in the apk file and you are using URLLoader (because the app originated as a web application), add "app: /" at the beginning of the URL string you use. Thus, "xml/myFile.xml" becomes "app:/xml/myFile.xml". If you need to keep your original web application logic, add a conditional on Capabilities.playerType == "Desktop. »

  Hope this helps someone else with the same problems

• How to include Php files in SrcView and Release Build

  Stupid question

  For a long time I was manual copy of any changes to my php debugging files in the output folder manually. I know they can be linked so they make to compile (and hopefully also included in srcview) but never took the time to understand what the process is.

  All the time, I guess that Suggestions?

  What do I create a new folder in your src perhaps as 'scripts' or something.  Then, you can create a file .php in there and when you double click on open it should open your .php default editor.  Now when you do a release build, it will include the "scripts" folder in your bin to release.

  Then do something like

  The only problem I encountered when testing on-site, you need to have a copy on a server, unless you have apache running locally.

  I hope this helps!

• Lack of option "Native Installer" Export Release Build for AIR application

  I was wondering if anyone else has to face it. Regardless of the type of soft AIR that I work on all I get is the export to the file option. I'm updating with AIR 2.5 SDK Flex 4.1 SDK on a current install of Vista 64.

  You need to update Flash Builder 4.0.1 for the native installer option in the export Release Build.

  Your newspaper seems to indicate that you are on Flash Builder 4.0 (just using the SDK 4.1 won't, you must upgrade the builder himself for this).

• Packaging failure via mometics export-&gt; release build, due to the run_when_backgrounded permission.

  Hello

  Whenever I try to package my request for signature and publication using momentics export-> Blackberry-> Release version, my packaging fails with the following error message: (bar file is created, but it cannot be installed on the device)

  Package failed: 2
  Info: Package created: /Users/deepak/bbcodebase/BB_App/arm/o.le-v7/myApp-1_0_0_1.bar
  [ERROR] MANIFESTO. MF: Invalid value 'access_location_services, run_when_backgrounded, access_shared' for the attribute "Entry-Point-user-Actions".

  Here is the excerpt of permissions that I use in my bar - descriptor.xml

  run_native

  run_when_backgrounded
  access_location_services
  access_shared

  When I delete run_when_backgrounded permission to my bar - descriptor.xml, packaging works correctly and the binary signed, I can install and run on my device.

  Without signing the application and using debugging tokens, I can install the debug version of my app (via momentics) and run it on the device with the permission of run_when_backgrounded without any problem.

  I developed a native BB 10 application, using the following configuration:

  SDK version: 10.1

  Feature: Q10 with 10.2.0.424 software

  Momentics® IDE for BlackBerry: Version: 2.0 Build id: v201310251603

  Development mode: on

  I need the permission of run_when_backgrounded for my application as some of the functionality that depends on.

  Request let me know what I'm missing here.

  Thanks in advance.

  Thank you sabdelsayed,

  I have upgraded my toolchain to 10.2 SDK and not observe this behavior. I forgot to update the community, an apology for this.

  Thank you all for help.

• Save the file to the shared folder in Release Build works, but not in Export version

  We are ready to present our application to App World. However, we noticied when testing the 'export release' that build our file saving function of does not work (the file is not be saved - but the folder we created). The file records fine when running in debug or release mode, but not to export the final file.

  Is - this all simply because we are not supposed to try to run the bar directly exported version file and it should work once on App World? Has anyone experience this problem?

  We are trying to back up the folder "shared/music/AppName" If that helps.

  We have corrected it. We were writing somehow to the wrong address in the "shared". For some reason, it still worked when you use version debug/directly from the IDE, but does not when exported. That's all now works well.

• New PC Build - what graphics card is popular here?

  I hope this is the right place for this question.  I'm planning a new build to replace a put together in June 2011 for working with Photoshop CC 2014.  My list of components is below my SIG.  I would be grateful for the constructive comments, particularly on the choice of graphics card.  I prefer to stay with NVidia.

  Thanks,-Dave

  GPU
  EVGA 02 G-P4-3753-KR G-SYNC support GeForce GTX Superclocked 2 GB 128 - Bit GDDR5 PCI Express 3.0 N82E16814487024 Ti 750

  Just answer this question a few days ago. This should help you.

  http://robertoblake.com/blog/2014/01/best-video-graphics-card-Photoshop/

  http://robertoblake.com/blog/2014/11/building-ultimate-Photoshop-CC-computer-PC-version/

  PassMark Software - video card reference maps

  Gene

• Still trying to get the SWF to run in Release Build

  The code below works fine in development mode in Flash Builder 4, but does not load the SWF file in the Release version.  I simplified it is here bare essentials: window pop up that allows you to load a SWF (made in Captivate 4).  Any suggestions are appreciated because this small problem is a very big project.

  Thank you.

  <? XML version = "1.0" encoding = "utf-8"? >

  < s:Application

  ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s ="

  Library://ns.Adobe.com/Flex/spark "

  xmlns:MX ="

  Library://ns.Adobe.com/Flex/MX "minWidth =" 955 "minHeight =" 600 " " >

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < s:TitleWindow ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s ="

  Library://ns.Adobe.com/Flex/spark "

  xmlns:MX ="

  Library://ns.Adobe.com/Flex/MX "width =" " 305 "height =" 100 "title =" new EBS | "" "Order the writer Milestone 1 - tail"close = "titlewindow1_closeHandler (event)" chromeColor = "#868FD1""">

  < fx:Script >

  <! [CDATA]

  Import mx.events.CloseEvent;

  Import mx.managers.PopUpManager;

  protected function titlewindow1_closeHandler(event:CloseEvent):Sub

  {

  loader.unloadAndStop ();

  PopUpManager.removePopUp)

  ce );

  }

  protected function textarea1_clickHandler(event:MouseEvent):Sub

  {

  ce .move (1,1);

  Loader.Load)

  "EBS_new_OW1.swf" );

  }

  []] >

  < / fx:Script >

  < s:TextArea x=" 6 "y =" 3 "height =" 30 "width =" 172 "text =" interactive video lesson "color =" #0E21A4 "contentBackgroundAlpha =' 0 " borderVisible =" false " editable =" false " mouseChildren =" false " useHandCursor =" real " buttonMode =" true "click = "textarea1_clickHandler (event)" / > "" "" "" "" ""

  < s:TextArea x=" 6 "y =" 34 "height =" 27 "width =" 172 "text =" view or print transcript "color =" #0E21A4 "contentBackgroundAlpha =' 0 " borderVisible =" false " editable =" false " mouseChildren =" false " useHandCursor =" real " buttonMode =" true " " / > " "" "" "" ""

  < mx:SWFLoader id=" charger " x=" 0 " y=" 0 "profondeur = » 10 "width = » 1024 "height = » 905 " />

  < / s:TitleWindow >

  < / s:Application >

  The documentation lists a set of SWFLoader events:

  Events

  full don't = "no default."

  httpStatus = "no default."

  init = "no default."

  ioError = "no default."

  don't open = "no default."

  progress = "no default."

  securityError = "no default."

  unload only = "no default."

  I'd listen to them

  Complete = "trace (Event)" httpStatus = "trace (event")... /.

• Release Build number

  Hello!

  I'm stuck on something related to my release. It does not work. I know there could be many reasons for this, most related to path dependencies in my code. In my diagnosis, however, I stumbled upon a question which I think is the cause of the problem. I hope someone has a solution!

  Here it is:

  I use Flex Builder 3, and it is an AS3 project. The project is without problem. Works very well from the bin-debug folder. As soon as I pull the files in the folder bin-debug in another case, however, it no longer works. I do this in the simplest possible. Here are the steps I take:

  1. create a new folder at the same level as bin-debug. Calling, creative, bin-debug2.

  2 copy all the files in bin-debug and sticking them in bin-debug2.

  3. open my browser and surf to bin-debug/project.html - works perfectly.

  4. open my browser and surf to bin-debug2/project.html - does not work.

  How is it possible for the same exact files do not work simply because the folder parent has a different name?

  I think answer that this will solve my problems of generation of liberation.

  Thank you!!

  If this post answers your question or assistance, please mark it as such.

  I think that it is a security problem.

  To run the application anywhere outside bin-debug, compile with - use-network = false.

  To run the application on the server, compile with - use-network = true.

  bin-debug is the development environment, as well as the flag of the compiler is not as important.

• build dynamically graphic

  Hi guys,.

  I'm a 3d graphics dynamically update, now its easy to plot the graph 3d when all values are known. In my case, check the vi, I have three wavelengths distance axis and power. The wavelength and distance are fixed I'll take the wavelength of 1596,35 - 1596,95 and distance of 33 572 649-34 085 735 who, in vi, are among the constants... power, I'm able to txt filed which I enclose. Now, I want to update the chart in the loop when the values are read from the txt file.

  I would like to know if anyone has an idea how to do this

  Hi Wishkebab,

  I think that nolsqun86 does not mean table, he wrote on the Board that develops because of the "insert into array.vi".

  I made this attempt to replace "insert array.vi" with "replace arry subset.vi":

  

  The "3d Meshdatatype.lvclass: field Helper.vi" seems to require at least a table with two rows filled to use for the matrix z entry in 2d.

  So I use 'initialize arry.vi' create a buffer with x rows and columns of 1999;

  the 'quotient & remainder.vi' produces a sequence because the dominator for example dominator = for example x = buffer size = 2--> 0-1-0-1-0...

  to replace rank 0 and 1 in the buffer zone with the new data in the table 'power '.

  I have no idea if the data are correctly drawn in 3d surface plot

  in what concerns the interpolation & scaling problems.

  Alex