Camera front with A1 problem

Similar Questions

• I have Lightroom 4.4 on my Mac laptop. It came with the purchase of a Leica camera. When I check the updates, the answer is that there is no update available. Download Version 5.7 of Adobe's Web site with no problems?

  I have Lightroom 4.4 on my Mac laptop. It came with the purchase of a Leica camera. When I check the updates, the answer is that there is no update available. Download Version 5.7 of Adobe's Web site with no problems?

  Your license for the 4.4 release will not work with version 5.7, you can download it without doubt, but if you do not have version 5.7 download then it won't do much good.  If you do not have a license for it so you won't be able to use it beyond use of the trial.

• I recently bought the Canon5Ds and the files can be played via camera raw with my version of CS5.  What should I do?  Is there a download that will correct this problem?

  I recently bought the Canon5Ds and the files can be played via camera raw with my version of CS5.  What should I do?  Is there a download that will correct this problem?

  For CS5, you must use the free DNG Converter. as this camera camera raw 9.0 required.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh

• I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image.

  Hello...

  I wonder if you can help me with a problem with my desktop OS X El Capitan 10.11.4 various...

  I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image. There is no disk in my hard drive... I try to download again, but still the same message...

  Help, please...

  Much thanks

  Lisa

  < re-titled by host >

  The actual message means you need to move the mounted image - the small icon that is displayed after you double-click the .dmg - and put it in the trash.

  Where do you see the message your computer?

• Generation of CSR with racadm problem

  Hi, I am trying to generate a CSR through RACADM, but it drives me crazy. First of all, I made sure that all the properties of certificates where set with RACADM and checked with:

  racadm - r myserver - u root Pei calvin get idrac.security

  Output:
  [Key = iDRAC.Embedded.1 #Security.1]
  CsrCommonName = myserver.mycompany.com
  CsrCountryCode = NL
  [email protected]
  CsrKeySize = 2048
  CsrLocalityName = BigCity
  CsrOrganizationName = MyCompany
  CsrOrganizationUnit = MyDept
  CsrStateName = NY

  Then I run:
  racadm - myserver root Pei calvin sslcsrgen g f myserver.csr u r

  Output:
  CSR generated and downloaded successfully from RAC

  But did not contain the file myserver.csr is downloaded "ERROR: cannot read CSR."

  If I try to generate a CSR with the iDRAC Web server, everything is fine and it generates a CSR file without any errors.

  Am I missing something here? Why it does not generate a CSR with the RACADM?

  I tried this on an iDRAC7 and an iDRAC8, with the same results.

  Thank you, I followed the instructions in the manual. The problem was that the dns name of the rac and the common name are not the same. The dns name of the cars was the host name and the common name was the full domain name. After that I put my common name hostname I could generate and download the CSR.

  Then I came across the following problem. Generate the CSR, requesting the certificate of the CA and the Uploader on idrac all went well. But when I access the idrac with a browser certificate is not valid. The error is 'name on the security certificate is invalid or does not match the name of the site.

  Because I use the host name for the common name and access the idrac with a browser on the domain name is not complete. Also, I couldn't use the fqdn for dns rac name and common name because it was not allowed for the dns name of the cars. As to my knowledge the idrac does not allow me to specify subjectAltName, so I'm done by using openssl to generate a CSR and private key with the host name and FQDN name. Request a certificate to the CA and upload both the certificate and the key file.

• My Canon MP560 came up with an error message "U041".

  My Canon MP560 came up with an error message "U041".  Anyone know what it is?  I think it means that I need to replace the ink cartridges.

  Or can you tell me how to find the answer on Google?

  Hello
  I suggest you to contact Canon support on this issue because the problem is with the ink cartridge.
  http://USA.Canon.com/Cusa/support/consumer

• Smartphones blackBerry with emails problem

  Hello

  For some time (2 or more weeks), I have problem with my emails. Some of them come with delays to the aircraft, some of them come at all. Resemble delays of 15 minutes up to a few hours. For example: today last email I received at 07:40 on the interval, during the day I got 30 + emails and I don't have on the device. I called to the Poland of T - Mobile, but it seems that they don't care. "We're sorry, we're working on that, we'll fix it...". ». I called them last week, yesterday, an official complaint was sent by post 3 days ago. Still nothing. Is there another solution for this problem? My camera BB9900 with OS 7.1 worm 2061 (v. 7.1.0.714, platform 5.1.0.532).

  Thanks in advance

  Wojtek

  Hello and welcome to the community!

  Your device, that's all that you can do the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) remove and return Service directories

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  If this does not it, it's on the door-side (as they have told you), and unless you have a way to fight them, you must wait for them to solve. You can, of course, check your contract documentation to see if it is at any point in the required resolution that they must respect... that normally would require so some financial remedies to their users. I have no idea what your contract might say in this regard, however.

  Good luck!

• Photoshop CS6 camera Raw Highlight detection problem

  PS6 and PS4 on a Vista Ultimate machine w/64 MB of ram.

  In both versions of Camera Raw, my default settings suck.

  Taking as an example a file of a white wedding cake

  When I open the raw file in PS4 Camera Raw and add a 0.95 exposure value.

  I just started to get the point cutting culminating in the 'hot' areas of the cake.

  When I open the same file in PS6 Camera Raw with the Version of process for 2012

  (Current) I have to add an exhibition plus 2.15 before any red watch clipping.

  Even if the image is seriously vulnerable at this stage

  The 2010 process Version plays the same as the PS4 Camera Raw.

  Process version 2003 brings about the warning of cut a bit earlier than the 2010

  Process version.

  I was under the impression that I should use the Version of process of 2012 for best results

  But the warning of cuts to highlight is definitely out of whack.

  I trashed my preferences and re-installed SP6, but the problem remains.

  Any help would be appreciated.

  Thank you.

  The exposure control became more than a "brightness" control, that it triggers the halftone pixel values without adding a lot of strong points.  Measurement pixels below the clipping level wedding cake.  Like it or not, that is how the 2012 process functions.

  Richard Southworth

• CC Desktop App for the Government concerning: the end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  Desktop adobe Creative Cloud for government applications :end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  1. They will be able to download and activate the installation package through CC e package on Internet workstation and transfer with a USB flash drive on a workstation Intranet , hence they can deploy desktop applications to end-user desktops CC?
  2. The deployment of renewal process will work the same as above?

  Government accounts https://forums.adobe.com/thread/1483694 can help

  or

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  or

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  Creator of Enterprise Cloud https://forums.adobe.com/thread/1489872 License Restrictions

• Is it possible to update my Version of Lightroom5 to the Version6 if my program came bundled with a Canon or Leica camera?

  Is it possible to update my Version of Lightroom5 to the Version6 if my program came bundled with a Canon or Leica camera?

  Yes you can, I got the 5 LR with my leica D - Lux 6, then updated without problems to LR6 the stand-alone version, not the cc, also mostly I use Capture One instead.

  upgrade, you only need to pay the upgrade price, not the full.

  Hope this helps.

• com Apple.launchd.PerUser came out with the code: 4

  We create a game to run on the mac desktop.

  The game was built using Flash Builder 4.6 on the pc, using Air 3.5 (using Air 3.4 until a few days ago)

  I create the SWF on the pc and then copy it on in the mac mini - (which was running OSX 10.7 - updated updated yesterday at 10.8 in case that was the problem)

  Once on the mac mini - using the 3.5 SDK for mac Air to build the .app using ADT

  / Users/macmini2/Documents/AdobeAIRSDK/bin/adt - package - keystore MM2.p12 - storepass PASSWORD - pkcs12-bundle stores target "... / release/Megaplex2.app"Main - app.xml Main.swf AppIconsForPublish data.

  When I run the file final app on the mac mini, it works without any problem. (OSX 10.7 and 10.8)
  I also tested this app on a macbook pro with no problems (OSX 10.7)

  The results of problem when we send the app to our distribution partner. They report that the application fails to start:

  On my Mac Mini (10.6), it never seems to. On two of the iMacs from our Mac Tester, the application icon appears in the dock momentarily, before closing then (no window appeared).

  So far, the only clue to this is a log of the console where it out this:

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:00.800 PM]: ([0 x 0-0x3f33f3]. Megaplex2 [3114]) came out with the code: 4

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:04.907 PM]: ([0 x 0-0x3f43f4]. Megaplex2 [3118]) came out with the code: 4

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:06.240 PM]: ([0 x 0-0x3f53f5]. Megaplex2 [3120]) came out with the code: 4

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:35.596 PM]: ([0 x 0-0x3f83f8]. Megaplex2 [3127]) came out with the code: 4

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:37.040 PM]: ([0 x 0-0x3f93f9]. Megaplex2 [3130]) came out with the code: 4

  
  I installed the runtime air on Air 3.5 build computer and it made no difference.

  Someone has an idea of what could be the cause?

  OK, looks like we found the problem.

  When I was zipping the app to send them, I was the Zipper on the PC.
  Turn, it is the cause.

  If I zip on the mac using its "compress" function and send the zip, it seems to work ok.

  /me shakes his head.

• Verizon said I can be faced with one problem with my browser and don't charge but ATT, gmail and other

  Tried loading Verizon homepage, but it says I can be faced with a problem with my browser. ATT, gmail between other fine load and Verizon was very well for some time now, what should I do? I'm not tech savvy so please keep it simple for me, thank you.

  Try to clear your browser's cache.

  Firefox button or tools > clear recent history... - details and of course Cache hit only is selected, and then select all and click the clear now button.

• Presario SR1463CL with drivers problems

  Please be tolerant of beginners.

  I purchased a SR1463CL to add to a DELL Dimension - old but never fails. -the HARD drive was crushed. I replaced the HDD Samsung with Western Digital. I have replace the dial-up modem. All this without problems. I installed Windows XP Pro and SP2 update. My system detects "New hardware" drivers VGA Compatible and multimedia controller. I have had no success finding the right drivers and their installation. My monitor works find, but I have no sound.

  Poster 'sounds, video controllers' Device Manager with the problems. Initial device showed sound and audio by default to the Modem. I removed which and at this point no device is indicated.

  Device Manager shows no driver found for new hardware and online search has failed. Windows Update detects any is available. I checked on the resource one manufacturing line have failed in my downloadsfrom RealTek and Nvidia.Dial - up has had major periods and material has been identified as there's no way for the system. Previous owner had made the back-ups-DVD-but they went "purple haze" and could not be read. That's why I installed XP Pro.

  My modem does not work on and additional time. It will connect and funtion but after a few minutes I'll get "Page not found" displayed.

  So, I use my Dell Dimension for internet troubleshooting. Any help is greatly appreciated.

  Respectfully.

  "Submariners do it deeper."

  Thanks for the information. Due to serious conflicts resulting from auto-updates from microsoft, which I had to reformat the HARD drive and have located since the necessary drivers to the www.sis.com for VGA and www.realtek.com for audio AC 97 readers to be precise. Manually review and choose downloads in the future.

  "Greens, all councils prepare to dive."

  Thanks again for your help. It is greatly appreciated.

  Bamabubblehead went to the abyss.

• My macbook air running hot and the battery drains quickly can help you with this problem?

  My macbook air running hot and the battery drains fast is a 13 ", at the beginning of 2014.  Processor 1.4 GHz intel core 15Can you help with this problem?

  Apps can affect the performance of Mac, battery, temperature and fan activity - Apple Support

• AZ1VR Action Cam Mini with a Wi - Fi connection is the GPS integrated into the handpiece

  I have the new AZ1VR Action Cam Mini with a Wi - Fi is the GPS integrated into the handpiece

  cannellaj wrote:

  I have the new AZ1VR Action Cam Mini with a Wi - Fi is the GPS integrated into the handpiece

  Yes, get the GPS with the AZ1 to remote LVR2V wrist. You must also update the firmware in both devices. I have both and they work great.