Relink batch - based preflight settings?

Similar Questions

• ID CS5 - sharing preflight settings

  Hey there

  I work in a small design studio and I recently installed CS5 and love the function preflight.

  I would like to copy the preflight settings I created across to my colleagues machines.

  Does anyone know if there is a way to do this?

  Thanks in advance

  Tom

  Easy as...  Create your profile (you have obviously done already), then use this button down the bottom of the Panel:

  

  Choose export, then go to your other installation of Indesign and choose load...

• How are controlled based % ROWTYPE settings?

  Hello
  
  (Oracle DB 11g)
  
  Please consider the following example:
  

  CREATE table t1(c1 number, c2 DATE);
  
  CREATE table t2(c1 number, c2 DATE);
  
  CREATE OR REPLACE PROCEDURE p (p1 IN t1%ROWTYPE) IS BEGIN NULL; END;
  
  DECLARE
  v t2%ROWTYPE; -- please note, different table from p definition
  BEGIN
    p(v); -- this compiles!
  END;
  /

  It seems that Oracle validates the parameter based on the underlying elements Records only, not on the actual "source" of the record. Is this correct?
  
  Is this a bug or by design? In both cases, I think that this is not good because I found a bug in my application where the wrong table was referenced but it was detected only when the code was deployed in a different environment where this table did not exist...
  
  Thank you
  Luis

  Luis Cabral says:

  Why is it different when you use

  % ROWTYPE? Perhaps because it is not a folder named explicitly?

  Somehow. PL/SQL is a language independent based on Ada. SQL is integrated with it.

  PL/SQL is a strongly typed language. A structure of type PL/SQL is defined via the check clause. However, it would be quite rigid and heavy to use the clause to check for duplication of structures SQL that you want to use in your code. So the + % RowType + clause. Instead of you having to identify the members of the structure and data types, it does it for you.

  The result is a record structure. PL/SQL does not have the SQL tables. It uses no tables. It is the function of the SQL engine - and the SQL language is used (in the PL/SQL code) to access the tables.

  PL/SQL to be so called the SQL engine, for example, insert data into a table. PL/SQL uses a data structure such as bind values for this SQL call. PL/SQL itself writes directly to this table using this structure.

  This structure of PL/SQL must match the structure of the table. And that's all.

  Why PL/SQL must check the target of the entry (specified in another language and written by this language engine). Why should he determine if its structure it passes to the SQL engine, matches that of the target of the SQL engine? The only requirement here is that the structure itself is not valid - to know if this structure, when it has been defined, has been set using the same target SQL.

  I still think that not checking the table on that record is based may be confusing.

  Don't agree. He's going to break a lot of existing code and much more complicate existing code.

• Forms Adobe based LCD settings

  Hello Experts,

  I am a beginner in adobe forms design and I have a few questions. Please help me

  1. I have designed according to the form XML schema. When I opened this form in Adobe Reader I can't save the filled content. How to get to fill and save using Reader?

  2. How can I make a visible/editable form in mobile?

  Kind regards

  S. Satish

  For your first question, see this topic: https://forums.adobe.com/thread/1536515

  In the measure of mobile PDF support, history is not so great. The mobile version of reader does not support filling of XFA forms. You could make your form in HTML5, but it requires the product Adobe LiveCycle Forms.

• Problems with batch synchronization

  Hello

  I have a model with 4 Sockets when I launch a sequence (screenshot attached) and using the synchronization of the lot. Batch all the settings in "Settings" in the column are set to "Only a Threead".

  Each of the three "Batch" Enter "-synchronization steps are also finished with a batch of output." "

  The question now is why I get after the while loop attached error?

  Thank you

  By setting the time step to Thred One Only you tell others taken to just run the code once (i.e., as if the time step did not exist for other loops).  So why they go out the closure on the first iteration and imperatively which was the "thread" will end out of the loop.

  I think I'm a little confused on exactly what you want the code to do.  I think you all in loops to execute for all discussions, if you want that all sockets to loop.  There isn't a way around that.  Why don't you have of the step to execute for each thread?

  Kind regards

• Preflight works not

  Hello

  I have an indesign document that shows with errors, but when I open the preflight Panel there is nothing there! I double checked my preflight settings and tried to create precisely errors that is overset text, but it is stil not displaying no not errors.

  Hoping someone may have met before and know how to fix it!

  Thank you

  So, the links panel says there are missing links, but the preflight panel shows green, or shines red, but has no list of mistakes? If this is the case, see replace your preferences

• Problem getting a batch of images in a folder

  I have some images selected in Bridge. If I use the image processor it is very good, the images processed (using my action at the bottom) and ends in a jpeg file in my folder on the desktop. Unfortunately PS is also creates an image duplicated on the desktop, which gets real bulky with 200 images scattered throughout the office.

  If I drive from lot, nothing works because it's stop at the window of the cab, as it comes to DNG. (if the override save as is checked or not) Thank you.

  After the action and your batch dialog box settings, I don't understand what you wrote.

• Batch program - for the initializeThreadWork parameter null pointer exception

  I'm a java program that receives some paramteres coding for the user batch screen and my logic for pick up/use of values is as follows:
  
  1 using the method validateSoftParameters() of the batch class to retrieve the settings to public static variables: filePath = this.getParameters () .getFILE_PATH ();
  2. in the initializeThreadWork() method of the Worker class static just use the static variable, not the parameter itself: fileWriter.openFile ( filePath, fileNameBuilder.toString ());
  
  When I submit the batch of the online page, it seems that the validateSoftParameters method is not called if the variable cannot be set.
  
  Issues related to the:
  
  -Are there some reason that this method does not work?
  -What is the flow of effective implementation of the methods abstract/ovirriden in order to decide where to put what logic according to the when the methods are called?
  
  Thank you!
  
  Published by: angelperez on February 16, 2011 07:14

  Hello
  for a batch program, the settings that you have that you created don't appear in a class outter, you can add the parameters in the static inner class, it will be no exception nullpointter

• HP OfficeJet 4620 - not the router's IP address

  Hello!

  I have a HP Officejet 4620, who worked until yesterday under power and off the fine. Yes, digitization is a PITA, but well, it was a gift

  In any case.

  Since yesterday my 4620 won't get an IP address from my router. I use a router TP-Link WiFi with OpenWRT. I had it configured the printer receives an IP, but even that won't happen again.

  I printed directly from the printer to the Network Configuration page and the testpage so Wifi.

  The wireless test tells me that the printer is connected to my wifi, by dint of perfect signal and has the right channel (11).

  The network config page shows, however, that the printer is disconnected my wifi but has the correct SSID listed. And theres no IP assigned.

  I have already tried to assign a manual IP in my network and have restored the settings default to wifi, but when the software waits a new IP from my router, it didn't get one.

  Also several reboots does not change a thing.

  But the router side he has changed nothing and all network (LAN or wireless) devices are connect well and they will have an IP address fixed or dynamics of the DHCP based on settings.

  So I would appreciate any help b4 I throw this piece of sh * t through the window.

  Thanks in advance

  Andy

  Hi Obi-illusion,

  Thanks for the reply!

  My apologies, I should have realised that before I sent the update of the firmware. You can also do it via computer if you happen to have a USB cable, just click here.

  If this doesn't solve the problem, or you do not have a USB cable, please read this privacy statement for HP: http://bit.ly/pCUQT7 and continue to check your Inbox of forum for a reboot. If you are unsure how to check your messages on the forum this post, has the instructions.

  I hope that does the trick!

• How to run multiple simulators run on different PCs

  I'm working on an application where I have several clients to communicate through BBM, the imam surveys using sdk 6.o BBM surveys

  He has only two simulators, I tried to run another instance of another PC Simulator, change batch simulators file settings, configure the IP address of the computer where MDS is changed running.also app-param = regSrcPort = 9784 and also changed the pin code of this instance.

  My bat file (sim3.bat) simulators is like thi

  fledge.exe/app = Jvm.dll / Pocket = 9800/session for partner = Sim1/app-param = JvmAlxConfigFile:9800.xml/data-port = 0x4d44/data-port = 0x4d4e /pin = 0x2100000A/app-param = regVersion = 3/app-param = regDestIP/app-param = (ip address of the pc running Simulator MDS) = regDestPort = / app-param 19781 = regSrcPort = 19784/app-param = DisableSyncServiceRecord/title = ' Simulator of BlackBerry 9800-3 '.

  but communication is not good, I can only receive message but cannot send from this instance...

  can someone help me how to communicate b'w all these instances of simulators...

  Hey,.

  I have resolved, in fact I forgot to set the config of Mds

  http://docs.BlackBerry.com/en/developers/deliverables/25813/Run_the_MDS_Simulator_1347972_11.jsp

  Before you start: End task, Configure the simulator of BlackBerry MDS to use unlimited strength encryption. If you use the BlackBerry MDS Simulator on one computer other than the BlackBerry Smartphone Simulator, in therimpublic.propertyfile (by default, in C:\Program Research In Motion\BlackBerry JDE 6.0.0\MDS\config), changing theUDP.send.host

  value to the IP address of the computer running the BlackBerry MDS Simulator.

  It's only question...

  now it is perfect. b'w multipal instances of simulators on different PCs.

• Why are my unsaturated when photographs open in Camera Raw and Photoshop?

  Hi all

  I have problems with Camera Raw and Photoshop and I do not know how to proceed. My pictures are very different when it is open to these programs in comparison when open in Adobe Bridge and camera. Photoshop and Camera Raw change elements of photographs in a negative way (for me). I'll try to use a screen shot to illustrate.

  The left image is seen in Bridge and on my camera and I want that image to look like more or less. Unfortunately, when open in Camera raw (figure on the right) the colors are very obviously different. How can I prevent that from happening. Hope that his and easy difficulty because I'm enough experianced by using this software.

  Thank you.

  My best guess is that you're displaying overview integrated camera into Bridge. Check the grid icon in the toolbar and see if it is set to prefer embedded or high quality. Uses of quality high ACR to regenerate previews feature current development settings, or, if no parameters are applied, running by default.

  Glimpses of the bridge are in fact of sRGB, and images with larger ranges tend to look breath.

  I don't know how experienced you Raw/ACR, but it should be noted that embedded previews are based on settings in the camera control setting of the image, contrast, Saturation, etc.. Whereas previews ACR are based on ACR defaults (which you can modify to your taste), camera profile and development settings. ACR does not take into account most of the settings of your camera.

• convert thin in thickness but with less space

  Hello

  I create a Virtual Machine with 50 GB disc (using 10/15 GB) as thin on an ESX Server.

  I know how to create a thick disk, but I would like to create about 25/30 or not 50 Gb

  Is possible?

  How can I do?

  Thanks in advance

  IIRC, you will find the possibility to drive volume base conversion-based advanced settings for the 'disk '.

  André

• Re: No DHCP for physical clients

  @abeggled

  No, it should not be a router it. More in the video below...

  Visio network (must be correct)

  http://www.Bilder-space.de/show.php?file=04.08AGPMCjdKIqeKjF1.jpg

  The ESXi Network Setup

  If you need more information, just ask

  The new server is just a replacement for the old, is - this can be a problem outside the virtualization?

  Have you checked your switch on DHCP Snooping or IP/MAC based ACL settings?

  Daniel

  ---

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Index on the date column

  Hello
  
  I have a behavior when running a table with an indexed column date that seems a bit away from me.
  
  I have a table with many columns and rows 4.8 million (Oracle 11 g 2). One of his columns is of data type Date. This column is indexed using a b-three index.
  
  Consider the select statement. It returns only 32 thousand rows (less than 1% of the number of rows in the table). Oracle did a full scan to run the query.
  
  Field2 can be any column of the table that is not part of the index (for example, a column which is varchar2 (14)).
  
  As the used filter has a high selectivity, I expect Oracle to use the index on the date_field when executing the query. Have no idea about it? Is there a rule on the date columns indexing?
  
  Select Field2
  TABLE
  WHERE date_field > = TO_DATE('13/09/2010','DD/MM/YYYY')
  and date_field < TO_DATE('14/09/2010','DD/MM/YYYY')

  user492400 wrote:
  The clustering_factor is not too high?

  OBJECT_TYPE-> INDEX
  BLEVEL-> 2
  LEAF_BLOCKS-> 14796
  DISTINCT_KEYS-> 3249780
  AVG_LEAF_BLOCKS_PER_KEY-> 1
  AVG_DATA_BLOCKS_PER_KEY-> 1
  CLUSTERING_FACTOR-> 3620372
  NUM_ROWS-> 4823298

  If you look at your plan, it has a cost of 11156.

  The CBO estimated 29446 lines will be returned. It's a selectivity of 29446/4823298, which represents 0.61%.

  Therefore, the cost of using the index is approximately:

  2 (blevel) + 0.61% of the 14796 (pads of sheets) + 0.61% 3620372 (clustering factor) which is about 22195 (assuming that CBO based default settings).

  22195 is superior (so much) than 11156 so Full Table Scan WINS.

  See you soon

  Richard Foote
  http://richardfoote.WordPress.com/

• Previous page ("Back" button)

  Hello

  I have this scenario: a Flex application calls another Flex application (using a menu) passing certain parameters; the new Flex application shows some results (based on settings) in the SAME window broser. Now, I want to add a Button component in the called application to behave like the browser's "back" button, I want to return at the request of the appellant.

  How can I accomplish that? I want to emphasize that the called app cannot be opened in a new window (should be the same) and the "Back" browser button cannot be used (even if it is functional).

  Any help is much appreciated, as usual...

  History.back() () starting from Javascript.  You can try to call the function ButtonBack

  through employment insurance if you use the default templates with history.