HP OfficeJet 4620 - not the router's IP address

Similar Questions

• OfficeJet 4620 loses the connection to the WLAN

  I have printer HP 4620 installed on my local wireless network.  I checked the Network Configuration page and the IP address and the gateway address are what they should be.  The router is a Centurylink C1000A.  I lose the connection to the printer.  If I have something to send to the printer it doe not prints.  If I unplug the printer and plug it into the time ' it prints what (what)  If I try again later I have to do the same.  This happens with all laptops and PC on the network.  Same thing if I try to scan.

  These settings are to set up your wireless printer stay connected to your router, keeps better connected wireless devices and makes your router secure and hack proof.

  1. position a static printer IP (see step 6) outside of the DHCP of the router Beach (check your manual).

  2. check the printer "Auto Off" is disabled.  Use the built-in webserver (EWS) by going in the

  the printers IP address in your browser's address bar, click Settings tab/Auto Off.  Or use the printer

  Assistant, printer Home Page (EWS).

  In the router: (refer to the manual of your router for more information)

  3. use a wireless channel fixed as 1, 6 or 11, never 'auto', try channel 1 first then the rest.

  4 choose the router to 20 Mhz only, or 145Mbps router function.

  5. always use WPA2-AES encryption (personal), but you can try the "mixed" mode

  6 disable the WPS and never use it and disable the UPnP for the security of routers.  No one can hack into your

  now the system and helps with wireless connectivity (if you want to know why, research on the web).

  7. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure you the SSID is NOT the same.

  they must be different for all the bands, even for networks without comments.

  8. save all settings.  Food at the same time, wait 5 minutes.  Power on router wait 3 minutes.

  9. turn on the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control the network and Internet\Network and Center\Advanced share sharing settings.
  2. Under home or work (current profile)-network discovery.

  Select "Turn on network discovery" and save the changes.

• All-in-one printer, HP Officejet 4620 blocks the laptop HP dv7t-7000 Quad Ed

  I have a HP Officejet 4620 all-in-one printer connected via USB to my laptop HP dv7t-7000 Quad Ed. This printer makes my laptop BSOD. Reloaded the driver and the problem appears after some successes of print jobs. Help, please

  Hello

  The port marked as number 4 is a USB 2.0 port , while the number 3 is a USB 3.0.

  

  Kind regards

  Shlomi

• When I try to download the latest Flash vs information in the login box has the incorrect ID. I can get on the Web site at the address (not the password... address) but the download area.

  I'm having a problem with my sign on info incorrect when I try to download the latest Flash vs It has my name my name sign - not what I use to sign in adobe. How can I fix it? The Web site he has correctly.

  Hello

  The password is displayed by your system, no Adobe and the password that you use to connect to your computer, not the Adobe ID password.  Please see what userid & password I need to install Flash Player?

  --

  Maria

• OfficeJet 4620 not found device error msg

  I can't get my officejet 4622 to print over the network. The light is excellent - blue - connection but when I try to print I get an error. When tent to go through setting up he says impossible to establish connection 2way. I suspect maybe the firewall problem, but don't know how to get around. Tried printing via a usb port, that doesn't work anymore. Tried to send email to Eprint and received SPAM message, but was able to print to Eprint from another email address. It's so weird, amd to a total loss, at this point.

  Hey @LS1917 ,

  Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.

  I understand that you are having problems with your printer communicates on the network.

  I would like for you to take some time and power cycle your wireless router, your printer and your computer, and try to do your job again.

  What operating system do you use? Press the link to discover, in case you don't already know. http://whatsmyos.com/

  Once you let me know the operating system you use, and after having tried power cycling instructions, come back to me with the results and we continue to try to understand the problem for you. Can't wait to hear back on your part.

• HOW CAN I INSTALL AN OFFICEJET 4620 WITHOUT THE CD?

  The disc to my printer is lost and I need to install on a new laptop, is it possible without the CD? If so, how?

  Hello

  Please download the drivers and full software for the right to an operating system on your computer and install it on your computer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5191646

  Kind regards.

• HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

  My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

  Hi @Janilynn,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

  I would like to know if it solved the problem or gives you an error message.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• OfficeJet 4620 - will be not printed black - HELP!

  I have an Officejet 4620 and the printer doesn't print black ink.  Other colors print fine.  After spending $ 65, I've replaced the ink cartridges, and it would not print!

  I found the link to ""printer prints a blank Page or print no black or color ink for HP Officejet 4610, 4620, Deskjet Ink Advantage 4610 and 4620 e - all-in - One Printer Series " and followed all the instructions, TWICE, if not three times! "

  I also cleaned the printhead several times, two rounds each, and again, it will not be printed.  What to do is print the calibration reports that continue to eat my ink!   Printing reports colored pieces, but nothing in BLACK!

  This seems to be a very common problem with these printers because I have read several forums that describes the same thing, and HP does not seem a good solution or offer of difficulty or the problem.  I noticed most positions with this question end up making a private offline message.

  Before I wonder, the printer is no longer under warranty and I live in the United States.  PLEASE HELP ME!

  Hi @VetteGuy,

  Welcome to the HP Forums!

  As you have provided all the relevant information, I need to give a hand, I'll go and send you a private message to discuss the next step from here. If you are unsure how to check your messages on the forum this post, has instructions

• Photosmart 6520 does not print after upgrading the firmware on the router.

  I have problems with my router and a remote technician for Verizon FIOS updated firmware, solve my problem of the internet, but now my printer is not working.  When I try to print from my macbook pro (OSX Lion 10.7.5) it is said that the printer is idle.  When I try to print from my ipod and the iphone, it is said that it prints, but then nothing happens.

  I was able to set up direct wireless to print, but I don't want to go into the settings and change networks whenever I need to print.

  I tried to turn off the router unplug the printer and turn it back on.

  I checked to make sure that the WEP code and network name are correct.

  What can I do else?

  treeBear wrote:
  

  ricksmom wrote:
  

  I appreciate really all the efforts that you and other posters are on this issue, but I feel that I will not find a solution.  Maybe a new router?

  It is a long shot. But since we are short of ideas, please try to change the configuration of the router from WEP to WPA2 and try again to establish the connection. Because WEP is very old standard, some routers may have a few inherited defects that were never resolved.

  Well... This opens a huge can of worms, it leads eventually to a solution.  I changed the security settings and when I presented to them, 'wait while we apply the settings' screen appeared and never went away.  The timer kept spinning and this went on for over an hour.  Neither the old or new passwords worked and I completely lost my internet connection.  I called Verizon and ordered a new router and said the technician on the line of my being stuck in limbo. After a few basic tests (unplug and pluggng again) she transferred me to someone in the advanced group.  To make a long story short, he traced the fault not the router, but the optical network outside my home box.  It reset, reset the router (losing the new security settings and everything else) but my internet is back, and fortunately, so is my printer.  I'll live with that until the arrival of my new router state-of-the-art.

  Thanks for the suggestion, it was a frustrating experience, it finally lead me to a printer to work! I doubt that I would come to this point another way.

• HP officejet 4620 printing problem

  I use a HP Officejet 4620. The software is installed on a PC using Vista. I can print to it from my Ipad, but not one of my desktops. Help, please!

  Hey accents.

  I see that you have an impression of question from your Vista PC for your Officejet 4620.  How the printer is connected to the PC?  If network, then what was the last time your electric network configuration has been cycled?

  Follow these steps to reset your printer HP, your router and your computer.

• Problems installing printer Officejet 4620: error "access denied."

  Hello! I'm trying to connect my HP Officejet 4620 via the USB port on my computer Windows Vista x 64. The computer is already installed the HP Officejet 3320. When I installed the driver (version of basic pilot without additional software), installation is 'successful', but after finishing installation a message shows by reading that the computer could not connect to the printer. When I try to print a test page, a message appears saying: 'access denied '. In addition, the other printer which has worked before is no longer works and comes up with the same error "Access is denied.". Have clues on how to solve this problem? Thank you!

  PS:

  I tried to disable firewall and antivirus, I tried to reinstall several times, including in selective startup mode

  Hello electronicreprr,

  If two printers are connected to the computer via USB?

  This article deals with the error you receive, however expressly mentions networked printers.

  "Windows cannot connect to the printer. Access is denied' s ' Please help.

• Cannot access the Router #2

  Here is a diagram of my home network.  This is what works.  If I have a device (phone or laptop) connected to the #2 router (wired or wireless), I can browse my network devices and browse the Internet without any problems.  My problem happens the other way.  For example, if I have a device (phone or laptop) connected to the #1 router (wired or wireless) I can see all network devices, with the exception of #2 router and all devices connected to it.

  Starting from a device connected to the Router 1 # I can ping LAN ports and Internet #1, #1 wireless bridge and Bridge #2 wireless router.  However, I can not ping the Internet port on the Router #2.  I guess it's a setting on Router #2 just don't have yet.   Here is a list of my equipment:

  Wireless routers are the two Linksys WRT 54 G

  Wireless bridges are the two Engenius ENS202

  Any ideas on why this is happening?

  

  Turn your router n ° 2 in a switch\repeater.

  Changes required for the installation of WRT610n:

  1. Change the SSID of the evocative wireless for the location. Ex: UpstairsWifi
  2. This must be done at the same time on the configuration screen, change the IP address of the router to 192.168.1.254 for you there is an IP address conflict with your main router, disable DHCP and save the settings
  3. Don't forget after that point that the internet port of the router is not to be used only the LAN ports
  4. If you need to reconfigure this router you would use it's new IP address in the browser "192.168.1.254".

  This means that your network IP addresses range starts with ' 192.168.1.. " If not the typical another range of IP addresses would begin by "192.168.0. * ' in which case the router's IP address must be changed to 192.168.0.254

• NO OSPF routes in the database, but in the Routing Table (read you correct)

  Hi all

  I have a lab of two roads R1 & R2 (connected with Ethernet link) like:<------------------>R1, R2

  I can see, OSPF learned routes are Routing Table, but not in the database (read you right).

  How can it be possible? I saw the other direction several times i.e. the routes in the database but not in the routing table (like, VPN L3 remote end when we use the ability VRF-lite, or we try to remove from the interarea road of the LSA, but that is not the concern here)

  I captured a few newspapers & running Setup two routers. Please check and let me know what I am doing wrong.

  I erased the OSPF neighborship several times but still the same. Tried to bounce e1/1 on R2, but no luck.

  R2 #ping 3.3.3.3 lo3 Yes

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 3.3.3.3, time-out is 2 seconds:

  Packet sent with the source 2.2.2.2 address

  !!!!!

  Success rate is 100 per cent (5/5), round-trip min/avg/max = 64/76/108 ms

  R2 #.

  R1

  R1 #.

  R1 #show int ip short bones

  Interface area PID IP address/mask cost of State Nbrs F/C

  Lo0 9.9.0.1/32 LOOP 1 1 0 0/0

  Lo3 3.3.3.3/32 LOOP 1 1 0 0/0

  Et1/0 1 0 9.9.12.1/24 10 DR 1/1

  R1 #.

  R1 #.

  R1 #show ip ospf da

  Router OSPF with ID (9.9.12.1) (process ID 1)

  Router link States (zone 0)

  Number of links ID ADV router age Seq # Link Checksum

  9.9.12.1 9.9.12.1 255 0 x 80000028 0x00BE86 3

  9.9.12.2 9.9.12.2 256 0 80000032 0x0067F8 x 2

  NET link States (zone 0)

  Link ID ADV router age Seq # Checksum

  9.9.12.1 9.9.12.1 255 0 x 80000003 0x00BDFC

  R1 #.

  R1 #.

  #show ip route R1 | b door

  Gateway of last resort is not set

  2.0.0.0/32 is divided into subnets, subnets 1

  O 2.2.2.2 [110/11] via 9.9.12.2, 00:04:17, Ethernet1/0

  3.0.0.0/32 is divided into subnets, subnets 1

  C 3.3.3.3 is directly connected, Loopback3

  9.0.0.0/8 is variably divided into subnets, 3 subnets, 2 masks

  C 9.9.0.1/32 is directly connected, Loopback0

  C 9.9.12.0/24 is directly connected, Ethernet1/0

  The 9.9.12.1/32 is directly connected, Ethernet1/0

  R1 #.

  R1 #.

  R1 #show ip os not

  Neighbor ID Pri State Dead Time Interface address

  9.9.12.2 1 FULL/BDR 9.9.12.2 Ethernet1/0 00:00:36

  R1 #.

  R1 #.

  R1 #show run | s r o

  router ospf 1

  Log-adjacency-changes

  R1 #.

  R1 #.

  *************  R2  ********************

  R2 #.

  R2 #show int ip short bones

  Interface area PID IP address/mask cost of State Nbrs F/C

  Lo3 2.2.2.2/32 LOOP 1 1 0 0/0

  Et1/1 1 0 10 BDR 1/1 9.9.12.2/24

  R2 #.

  R2 #.

  R2 #show run | router s o

  router ospf 1

  Log-adjacency-changes

  passive-interface Loopback3

  2.2.2.2 network 0.0.0.0 area 0

  Network 9.9.12.0 0.0.0.255 area 0

  R2 #.

  R2 #show da os ip

  Router OSPF with ID (9.9.12.2) (process ID 1)

  Router link States (zone 0)

  Number of links ID ADV router age Seq # Link Checksum

  9.9.12.1 9.9.12.1 326 0 x 80000028 0x00BE86 3

  9.9.12.2 9.9.12.2 325 80000032 0x0067F8 0 x 2

  NET link States (zone 0)

  Link ID ADV router age Seq # Checksum

  9.9.12.1 9.9.12.1 326 0 x 80000003 0x00BDFC

  R2 #.

  R2 #.

  R2 #show ip road | b door

  Gateway of last resort is not set

  2.0.0.0/32 is divided into subnets, subnets 1

  C 2.2.2.2 is directly connected, Loopback3

  3.0.0.0/32 is divided into subnets, subnets 1

  O 3.3.3.3 [110/11] via 9.9.12.1, 00:05:22, Ethernet1/1

  9.0.0.0/8 is variably divided into subnets, 3 subnets, 2 masks

  9.9.0.1/32 [110/11] via 9.9.12.1, 00:05:22, Ethernet1/1

  C 9.9.12.0/24 is directly connected, Ethernet1/1

  The 9.9.12.2/32 is directly connected, Ethernet1/1

  R2 #.

  R2 #.

  R2 #show ip os not

  Neighbor ID Pri State Dead Time Interface address

  9.9.12.1 1 FULL/DR 00:00:30 9.9.12.1 Ethernet1/1

  R2 #.

  R2 #.

  Hello

  an OSPF router generates only a router-LSA (Type-1) by Area.This router-LSA contains a list with all the links in this area.

  You can see your telesignalisations with 'show ip ospf router of database' - 'show ip ospf database' rather an overview:

  Router Link States (Area 0)Link ID         ADV Router      Age         Seq#       Checksum Link count9.9.12.1        9.9.12.1        326         0x80000028 0x00BE86 3

  Router 9.9.12.1 announces a router-LSA for area 0 and the LSA contains 3 links. Apparently, you created the Loopback IPs when adjacency was already formed, if not the router ID would be defined the highest loopback IP (maybe that's the reason for your confusion). HTHRolf

• New Internet Service, do I need to reset the router E2500?

  I had used temporarily my router E2500 to work with a wireless broadband source by connecting it to a Cradlepoint CTR500.

  Now I will connect the E2500 to run (and ongoing) with Time Warner Roadrunner using a modem cable Scientific Atlanta WebSTAR DCP 2100. Given that I'm changing the source of the internet, do I need to reset the E2500 to factury default values, and then perform a new installation using the Cisco Connect software?

  The cable modem is currenlty connected via an ethernet straight cable to the PC. I had read that remove the ethernet connection and the cable from the cable modem and the modem powered off for 10 minutes will cause the modem to "forget" the PC's MAC address.  Once connect it MAC address of the PC had been "forgotten", the ethernet cable from the modem to the router, which make the modem pick up the router's MAC address and eliminate the need to clone the MAC address of the PC. Does this sound correct?

  Unplug the power to the modem cable for 30 seconds should be good enough. In regards to the router, you should be able to get without a reset, if it is set to DHCP for the type of internet connection.

• OfficeJet 4620 3-in-1 printer will not print on the wireless network

  Have updated my Mac OSX to Yosemite (10.10), & now the 4620 Officejet will not see my WiFi network.  Have already uninstalled & reinstalled, used USB and installation CD.  Restarted the router also.  The printer went as far "Retore System Defaults".  Any suggestions?

  THX

  Hi @tomiet,

  Welcome to the HP Forums!

  I see that your HP Officejet 4620 will print on your wireless network, using Mac OS X 10.10. I'm sorry to hear that, but I'm happy to help you!

  I recommend trying an installation installation of Wireless USB. Please consult this guide, convert a wireless USB connected printer. In addition, this video can help as well, Configuration of wireless USB printers.

  I hope this will solve your problem of connection and have a nice day!