Reload OSX

Similar Questions

• iMac, reloading osx after turning off the power

  No fix for iMac does load not... have tried rebooting and cleaned the discs... everything ok but need to reload OS x to start iMac every time...

  Can you be more explicit about what you did? So please explain exactly what is happening when you start.

• A520 printer and Mac

  Recently I had to reload OSX Mavericks. Then when I tried to reinstall the printer I get say error message "unable to install the software because it is currently not avaialbe from the software update server.

  Any ideas? I don't know if it's a question of Mavericks, HP issue or a server problem Apple. Thank you.

  Hi TexasSteve,

  I understand that you get an error message that the update server is not available when you try to install the A520 on your Mac.

  Mac PC have an internal database that tells them what's compatible and what is not. All you need to do is to run updates Apple software before attempting to install the printer. Even if there is no update that must be installed, internal database of the Mac will always be updated. Once you have done this, the printer should install without any problems. ( Shane_R@HPnote)

  I hope that this helps, please let me know how it goes.

  Thank you

• How can I move the button reload of the page in firefox OSX for next to the back button where it was before I updated.

  How can I move the button reload of the page in firefox OSX for next to the back button where it was before I updated.
  I know there is an addon for windows Classic theme, but I need a fix for osx... its very frustrating when you update and things like this change and can be customized to the way we are used to using the browser. his counter intuitive to have the page button refresh so far from the back and home buttons.

  never mind, I found the preferences in the addon manager... Thanks again!

• I replaced 3.6 with 4.0 and it will not work on my mac OSX 19.4.11 and need to reload 3.6, if you please tell me how

  Your home says page version 4.0 is ready to download on my mac, indicating that it will work with my version (OS x 10.4.11). After loading, my computer asked me if I wanted to replace the new version with my computer, with a complicated language that I discovered meant that I had to stay with 3.6 and remove the addition of version 4.0. Well, I deleted the 3.6, added to version 4.0 and my computer now tells me that this version of Firefox is not compatible with my computer. Please tell me how I can recharge 3.6, have Firefox and enjoy again! Thank you, Tom

  Unfortunately, Firefox 4 supports only Mac OS X 10.5 or higher Intel processor. The system you are currently using is no longer supported by Firefox (details can be found here).
  
  
  You can revert to a previous version of Firefox by following these steps:

  1. Open the Applications folder.
  2. Drag the Firefox application to the trash.
  3. Download and install Firefox 3.6 from here.

• The firefox browser window is not visible, only the toolbar. Have deleted and reloaded but no change

  When I open firefox, only the toolbar is visible. The main browser window is not available. I tried to open a new window in the menu bar, but no browser window appears.
  I deleted the program from my mac and reloaded a new version on the mozilla site, but still no navigation window.
  I'm not able to access the reset button, it takes a window is visible.

  I use a macbook pro with the latest osx responsible.

  You can try to do some maintenance.

  Repair disk permissions:

  • http://thexlab.com/FAQs/repairprocess.html

  Delete the plist of Firefox (org.mozilla.firefox.plist).

  • http://www.MacFixIt.com/article.php?story=20060606082246983 how the .plist files become corrupted and results troubleshooting

  Go to "~/Library/Preferences" and delete the plist for Firefox (org.mozilla.firefox.plist)

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• OSX Finder 10.11 refresh SMB3

  Configuration: Readynas 102 (SMB) 8.1 (wired) of windows and osX 10.11 (wifi).

  Hello

  My finder refresh on OSX when I make a change on the readynas in the files of the windows machine.

  Boring, I'm trying to reload the finder..., out of the solution today I ask the community of Netgear... Is one knows how to bring the readynas work find on mac os 10.11?

  Thanks in advance

  (I also can't run readycloud application on the mac.) Unable to find any discussion about this...)

  MRS. EN 01 dec 2015

  Problem found, but not resolved. Disable the antivirus readynas.

  After installation of windows on a new computer 10. ACCESS the readynas mapped folders was too slow to use it!
  I disabled the antivirus readynas to solve this problem of conexion that seem to solve my problem of refresh Mac os X 10.11.

  If one has the solution / advice to bring / alternatives for antivirus. Debate is still open.

  Kind regards

  Sylvain

  MRS. EN 15 dec 2015

• 10.11.2 OSX (El Capitan) will not synchronize with Apple Mail Hotmail

  Mac Book 2012, SSD 256, 8 GB Ram Just reloaded El Capitan 10,11,2 on SSD, naked

  SSDS are erased and reinstalled 10,11,2 to see if this would help... it didn't.

  Problem started with Yosemite and continues in El Capitan.  System I cannot add my hotmail for Apple Mail, Outlook or Thunderbird account!

  Example of an error message:

  

  System is "Unable to verify the account name or password" only on accounts Hotmail/outlook! All my other 5 accounts are added without problem! 

  I tried shortening hotmail password and renewed by password Microsoft 5 times in the last 24 hours, with no result!

  Help, please.  I've deliberately not migrated by user settings of my recorded image of the SSD drive before the clear operation just so I would not import corruption.

  What is a corrupted installation of 10.11.2?  If something is poisoned in my keychain?  Is this a known problem in OSX 10,11,2?  I am at my wits end because I love Apple Mail structure and have used for the last 5 years; all my files are organised in it, I want TO use it; but the system simply does not permit a connection to hotmail.

  I had this same problem on my iMac since the installation of El Capitan.  Never had a problem before this date.  I finally got Hotmail to synchronize, changed the process except mail leaves and fresh to add a Hotmail account.  It took several attempts, so no idea why it worked finally.  Now it syncs automatically not when I run Mac mail, but I can choose manually sync by right click on my hotmail account in Mac mail and it syncs correctly most of the time.  If it's not I pulled out and restart Mac mail then sync again manually.  Not an indoor pleasure, but it works.  I have no problem using hotmail on my windows PC.  After manual synchronization, I sometimes get an error when you try to delete or move a mail electronic hotmail to another folder.  I just wait until the next time I quit mail and restart to try again.  Something is certainly wrong somewhere.  Same problem with Thunderbird, but will have to re-enter the password manually to synchronize, memory of password never works, so it is not limited to Mac Mail, but is a Mac related issue.

• missing Msmapi32.OSX

  It's msmapi32.osx on XP.

  BACKGROUND:

  I have an XP machine special that I've been running VB6 applications over several years.  Recently a problem emerged causing the BONE flow slowly;  antivirus (AVG, Malwarebytes, Superantispyware, TDSSKiller) came negative.  This forced me to reload the original XP OS stored on a hidden partition.  I am now reloading all software application, including my own VB6 applications.

  PROBLEM:

  "When I went to run the first application in VB6 (which uses the MAPI interface), I received the following error message to the effect of"msmapi32.osx"is either not registered, or one of its components is missing.  I searched the C drive and have been unable to find "msmapi32.osx".  Note I have VB6 have not installed on the XP machine and can't remember if I already had VB6 intalled as I do all my development on another machine, so I don't know if 'msmapi32.osx' is provided by installation of VB6.  Outlook Express is installed.

  QUESTION:

  I think I know how to register "msmapi32.osx" using "Regsrv32." the question is how can I get a copy of msmapi32.osx?

  Any help would be greatly appreciated.

  X.

  XP rocks,

  Here's a tip, if you are interested.  I found msmapi32.ocx on my VB6 a installation disc installed without problem.  It turns out that I also need mci32.ocx who was also on my Visual Basic 6 installation disc.  After the two ActiveX is installed, the application is running.

  X.

• Fax driver for Mac osx 10.10.1 for Hp Officejet J4580

  Hello
  to tell you that my printer in question,.
  After the transition to the new operating system Mac OSX 10.10.1 (Yosemite) fax function does not.

  When I try to use the fax, pops up a message telling me to update the drivers, but the drivers on your Web site, there is no (or not found their) and my Mac tells me that there is no sw update.
  Of course, in manual mode, the fax is ok.
  Can you help me?
  Greetings

  Saxemard

  Hello

  Click on the Apple icon and select App Store, then open the updates tab.

  Click on the Store menu, then select 'reload the Page.

  If no HP update became available, be sure to install it and then add the queue of Fax Printers & Scanners.

  If there is still no software updates available to install the following package and then try to add the fax queue again:

  http://support.Apple.com/kb/dl907

  Notes; It may take up to 60 seconds for the fax queue appears after the clicking on the plus sign under Printers & Scanners.

  Shlomi

• Photosmart Premium C309g-m on: scan opion not showing Photosmart Premium C309g-m on mac OSx 10.10.3

  Hello. The scan option does not show the printer.  I reinstalled the printer as well as all updates. I have already scanned and this feature is currently unavailable.  I wonder how to solve this problem.  I am

  using Mac OSX 0.10.3

  Thank you

  Hello

  Restart your Mac, then try to run the software update as follows:

  First of all make sure that the printer is turned on and connected to your Mac or on the same network.

  Click on the Apple icon, then select about this Mac.
  Click software update, and then click the Store from the top of the indicated window menu and click on reload the Page.

  Be sure to install any update HP or Apple, then check for the difference.

  If it persists, try manually install the package below:
  http://support.Apple.com/kb/dl907

  Now you should be able to scan from printer & Scanners or Image Captrue as follows:

  http://www.support.HP.com/us-en/product/HP-Photosmart-premium-all-in-one-printer-series---C3/3984414/model/3793675/document/c04467713/

  You can also install and use the HP easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Please let me know how it goes,

  Shlomi

• OSX 10.5.8 & J6480... Sorry, scanner could not be initialized

  After several years of use of the scanner without problem, I can not scan documents on my HP J6480.  I'm on OSX 10.5.8

  I insert the document into the scanner J6480, my computer detects its presence and jumps to the top of the HP Device Manager window. However, when I click to scan, the program runs for a while and returns the message:

  Sorry, scanner could not be initialized.

  (Scanner not found)

  I suspect that what follows is related to the same problem. While trying to solve the problems of the control panel of the printer, I received the following message:

  The selected URL is: file:///Library/Documentation/Help/Hewlett-Packard/Context_Help/OJ_J6400/c_TROUBLESHOOTING

  Download the latest version of the software for your printer from Driver link request at the top of this page.  You may need to reload the software HP

• Ripple Emulator - no way to update content without reloading the entire page.

  Dear Forums

  Ripple using 0.9.4 in Google Chrome Version 19.0.1084.53 for Mac OSX 1.7.4

  I have not found a way to reload the application in the emulator only, without having to reload the entire page.

  It would be great if we could only update the content of the device instead of the whole page.

  This also related in a problem with parameters for building waving-> passwords for the signature and the device reloading of the page down. (separate post for that)

  If it must be a problem in the incident handler, please let me know.

  Installed to ripple 0.9.5 (no sorry 0.9.6 according to the extension itself-> package shows only 0.9.5 but when he drag extensio nto chrome that lists 0.9.6)

  Pressing F5 refreshes perfectly content in the emulator.

  kind regards,

  Dennis

  -> Documentation on the keys taken in charge and how they funcion in ripple?

• C6380 and OSX 10.6.2 analysis of problems

  I have a Mini 09 with OSX10.6.2 and a Mini PPC with OSX 10.5.8. Both are on the WiFi network. Mini PPC can print, copy, scan and scan to OCR without problem. With the original drivers included with OSX 10.6, I could print, copy and scan. At least the scans occur shortly after choosing the printer overview iin or Image capture, although I could not scan to OCR. Since I've upgraded to the latest printer drivers on the Intel Mini, scanning is exceptionally slow. After choosing the printer Priview or Capture of Image, it takes about a minute to identify the printer. Then, it takes about a minute to Priview or Capture images to be ready to scan. I deleted and reloaded and reset the print queue several times. This is not enough. Also, buttons print/scanning never highlighted in the cover of the printer. Can anyone suggest other measures I could take?

  Did you get in the front area of Linksys?  We will just go see the DHCP range that he uses, and then set the printer outside this range.

  Type 192.168.1.1 in a browser.  The connection is blank and the password is "admin".

  Right there on the first page it will tell you the DHCP range.  Follow the instructions to enter a static IP address on your printer and choose a number outside this range (probably 192.168.1.) [something below 100]).

• I installed Photoshop CS6 extended (student version) on my Mac in May last year. It has worked perfectly until recently when the system tells me that the program is perhaps not able to work with OSX (I have OSX 10.9.5). I have now uninstalled the PS one a

  I installed Photoshop CS6 extended (student version) on my Mac in May last year. It has worked perfectly until recently when the system tells me that the program is perhaps not able to work with OSX (I have OSX 10.9.5). I have now uninstalled the PS application and you want to reload. I have the S/N codes and redemption. How should I proceed?

  Please visit to download applications download Creative Suite 6 .

  Kind regards

  Hervé Khare