iMac, reloading osx after turning off the power

Similar Questions

• Cisco router WIFI does not work after turning off the power

  I have a CISCO router that worked very well until someone turned off the power for a few minutes.  I tried to unplug the modem, the router and the laptop and waited a bit.  Then I turned on the modem, then the router, then my laptop but it is still not in communication with the modem.  I can use the modem with a hard connection to the laptop but need the WiFi as well as others can use it.  Help, please.

  You need to contact support with your Cisco router.  It looks like it might have been reset and the installation needs again.

• My MacBook Pro with El Capitan 10.6.11 close the menu drop down. I have to turn off the power

  The closing down and options no longer work in El Capitan 10.6.11 restart on my MacBook Pro mid-2012. I have to press the power button to turn off.  When shutting down or restarting are selected, the Ribbon at the top of the screen disappears and Finder is no longer available but other aps on the bench of the accused are still available. When I restart after turning off the power, the system is back to normal until I need to close again.

  Hello

  Just in case, run disk utility.

  Open utility disk located in Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

  If disk utility indicates that the disc seems to be OK, you are finished. Otherwise, you must repair the disk.

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• S2415H, PSM, turn off the power indicator "pulsed"?

  Can I turn off the power in Active mode indicator, but it would also power off when it enters PSM (power saving mode). Very disturbing at night in the room. Any way to do it?

  That's how I've always used my monitors over the years. Mine have always done well after the warranty period of 3 years.

• Satellite L20: Can I disconnect devices such as USB mouse without turning off the power?

  Hi all.
  I am owner of laptop Satellite L20. I always turned off power to my computer when I need to connect or disconnect a USB device. Some devices have a special icon on the toolbar disconnect them, but some don't (FDD USB or flash drives). Can I disconnect and connect devices such as mouse USB or Scanner wihtout turning off the power?

  Hello

  You can disconnect the external USB devices without turning off the unit, but you must use the option "remove hardware" before you cut the material.
  The icon "Remove hardware" usually appears with resources such as hard drives or USB key have the ability to buffer data. It of necessary for this buffer to the device before emptying it is disconnected

• LJ Pro300 color MFP M375nw. Power cycling, displays "49 service error - turn off the power, then press" on-screen.

  Bike constantly, the power display "49 service error - turn off the power, then press ' on-screen before stopping.
  For this printer only when it is connected to the network. Quite happy to sit quietly when printer NOT connected to the network.

  Unplug the network cable from the printer, check and clear all print queues (there may be a doc pdf sitting in a pc or server print queue)

  Once the queues have been dotted, restart the printer and reconnect the network cable.

  If this does not cure the problem, then the likely problem is a defective formatter Board.

  Good luck!

• 17 e040us seeing supply and turned on WIFI light after switching off the power

  17 - e040us after HPO updates and Windows Update now when I turned off the computer, power and wifi lights stay on... have to hold the power button in get them to turn off before I turn on the back

  tried the power settings and looked in the BIOS, there is nothing that I see... any ideas?

  Solved returned to the F8 BIOS and the problem disappeared... .has been F14, the origin of the problem

• E 7520 HP All - In - One Printer: turn off the power to the wireless printer

  I have not printed for a few days I have not noticed if my Wi - Fi connection worked.

  I tried to print wireless today and got the error message that the printer was not connected to the internet.  I tried to go wrong, but it did not help.  I checked the connection to the wireless router and put the password in.  It has not yet recognized it.  I tried to disable printing for my smart phone (I think it is called), but the screen froze on the circle showing the progress.

  I tried to turn off the printer with the power button, but that no longer works.

  The Wi - Fi light just keeps blinking.

  How can I disable the printer may reset?  Or can you help get my printer to recognize my wireless again?

  Thank you.

  Hi Rhonda, there.

  I would suggest to unplug the power cord from the printer without turning it off with the switch, it will do a reset without getting rid of all the parameters. You simply leave unplugged for about 1-2 minutes to clear out any power.

  I recommend then reconnect, and doing as much as you can from the guide below:

  Printer keeps no connection Wi - Fi

  Good luck and let me know how it goes

• Drive external DRIVE not detected (2 PCs), after turning off the PC during the error checking

  I ran properties/tools/error-check on a (regularly used to back up this PC XP) external HARD drive. After 2 days, error checking was still running and not even 1/3 way 4th Phase but I need PC. It was not possible to stop "Error Check" from the dialog box then I tried Task Manager/Applications, which said that nothing worked, so I turned off the PC.

  When I restarted the PC, external HARD disk was not in my computer. Control Panel of configuration/addition does not see it no more. However, when I plug / unplug the station. HDD USB cable, the computer makes a noise and is also recognized in "Device safely Shut Down" as a USB storage device mass (but no drive letter). I tried to start/run/Cmd/Diskpart/List Disk and it is not listed.

  NB. I checked the post. HARD drive on a Linux PC, which also does not detect not, then it is certainly the post. Drive HARD, not the XP PC.

  Can offer you any advice?

  Hello

  · What is the number and the model of the hard drive?

  As you mentioned that the issue isn't with the operating system but with the drive hard, for better support I suggest you to contact the manufacturer of the hard drive.

  You can also get in touch with any local technician who can help you with the same.

• Turn off the power limit Ad Tracking?

  Hello! I have a problem with the feature "search ad limit. The cursor is gray and will not let me turn off, saying that I have less than 18 years when I'm not. I've already changed to 'allow changes' restrictions and I don't know if I have apps which force advertising, tracking, and I don't know how to fix this, if this is the case. Help, please! I need this setting off to access certain applications of mine! I am also on a personal Apple ID.

  Turn off wifi and cellular data, then click on the button of advertising in privacy and turn off the announcement of limit button

• My iPad has been verification of operating system update for more than 3 hours.  Not able to do anything. Cannot cancel or turn off the power. Help please.

  MY iPad has been verification of update of the new version of operating system for 3 hours.  Unable on camel back or cut off the power supply.  What should I do? o

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears.

  Then go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete. Then go to settings > general > Software Update and try again.

  If that doesn't work, try updating through iTunes on your computer.

• Satellite A100 - turns off the power after 60 seconds

  After pressing the power button, the laptop starts but 60 seconds from the moment it is activated, the it turns off suddenly?

  The fan turns, I tried cutting dvd, wireless, modem, ram, hard drive, it opens and clean all the dust. It turns off after 60 seconds exactly every time

  Any ideas?

  Thank you
  Ben

  Hello

  > and clean any dust
  How did you do that?
  Usually, you can use jet of compressed air to clean the laptop and remove the dust that blocks the fan. That is why it s not necessary to disassemble the laptop as you can read here:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  And the same thing happens if you access the BIOS instead of starting in Windows?

• iPhone 4S heating quickly, turn off the power and the battery drains quickly.

  Hello

  My problem is exactly the same as the title. My iPhone 4S warms up quickly, turn it off and after I turn the iPhone, the battery drains quickly and the iPhone will turn off after 5 minutes. iPhone turns off again and again until I put the iPhone on the charger. It is bad because I like to play games like Pokémon GO. But after 10 minutes of play, the iPhone starts heating (and of course delay).

  Things I've tried: (and didn't work)

  The apps I use no fence. (I close applications once I stop playing)

  Turn off location Services. (Enabled only when I'm with apps like GPS...)

  Reduce the brightness

  I will be grateful for any kind of help.

  Welcome to Apple Support communities, Krystof11cze.

  It seems that you encounter problems with your iPhone 4S on iOS 9.2.1 with heating, battery draining and stopping. Good job on the steps you tried as I would have recommended those as well. I will do my best to help!

  1. backup of your iOS device - because I have erase you your iPhone completely, it is strongly recommended that you will lose your data if you do not.

  2. restore your device to factory settings - using the settings on your iPhone will only erase your personal data. You will need to let iTunes erase the iOS version installed a new clean copy can take place.

  3 test the question - the first time through, set up your iPhone as a new iPhone when it asks. It's just temporary. You can connect to iTunes and App Store and iCloud and also download some of your applications. Test for problems you encounter. If your iPhone's battery life is improved, follow the next step.

  4. restore your iPhone, iPad or iPod touch from a backup

  Take care!

• Satellite X 200-203 turns off when turn off the power

  Hello

  first of all, excuse my bad English please.

  Since 2 days I have the satellite X 200-203 portable and my first problem is that the battery does not load.
  When I connect the power he works very well, but did I unplug the power replisse or the laptop turns off. under vista it shows me always a 89% battery power, ALWAYS.

  What can I do?
  at least, the satellite logo lights up red annymore.

  Thank you

  Hello

  According to your description, the battery provides the laptop with power.
  In my opinion there is problem with the battery itself or electronic supply on the motherboard.
  I think that it of a failure of battery, but to be 100% sure that the audit of the books is necessary!

  The X 200 is a new series of laptop so I'm 100% sure that the guarantee is valid. Am I wrong?

  If you shouldn't t waste time and contact the service provider authorized in your country.
  The guys of the explain your situation and ask for later handling.

  Each cheque replacement and part is done for free!

  Good luck & congratulations guy ;)